Merge branch 'master' of git://git.denx.de/u-boot-marvell

This commit is contained in:
Tom Rini 2015-01-25 19:05:40 -05:00
commit 03cae7261e
11 changed files with 103 additions and 32 deletions

View File

@ -181,7 +181,7 @@ static void kw_sysrst_check(void)
#if defined(CONFIG_DISPLAY_CPUINFO) #if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void) int print_cpuinfo(void)
{ {
char *rev; char *rev = "??";
u16 devid = (readl(KW_REG_PCIE_DEVID) >> 16) & 0xffff; u16 devid = (readl(KW_REG_PCIE_DEVID) >> 16) & 0xffff;
u8 revid = readl(KW_REG_PCIE_REVID) & 0xff; u8 revid = readl(KW_REG_PCIE_REVID) & 0xff;
@ -192,7 +192,13 @@ int print_cpuinfo(void)
switch (revid) { switch (revid) {
case 0: case 0:
rev = "Z0"; if (devid == 0x6281)
rev = "Z0";
else if (devid == 0x6282)
rev = "A0";
break;
case 1:
rev = "A1";
break; break;
case 2: case 2:
rev = "A0"; rev = "A0";
@ -201,7 +207,6 @@ int print_cpuinfo(void)
rev = "A1"; rev = "A1";
break; break;
default: default:
rev = "??";
break; break;
} }

View File

@ -20,7 +20,7 @@ NAND_PAGE_SIZE 0x0800
# Configure RGMII-0 interface pad voltage to 1.8V # Configure RGMII-0 interface pad voltage to 1.8V
DATA 0xffd100e0 0x1b1b1b9b DATA 0xffd100e0 0x1b1b1b9b
#Dram initalization for SINGLE x16 CL=5 @ 400MHz # Dram initalization for SINGLE x16 CL=5 @ 400MHz
DATA 0xffd01400 0x43000c30 # DDR Configuration register DATA 0xffd01400 0x43000c30 # DDR Configuration register
# bit13-0: 0xc30, (3120 DDR2 clks refresh rate) # bit13-0: 0xc30, (3120 DDR2 clks refresh rate)
# bit23-14: 0x0, # bit23-14: 0x0,
@ -87,7 +87,7 @@ DATA 0xffd0141c 0x00000c52 # DDR Mode
# bit6-4: 0x4, CL=5 # bit6-4: 0x4, CL=5
# bit7: 0x0, TestMode=0 normal # bit7: 0x0, TestMode=0 normal
# bit8: 0x0, DLL reset=0 normal # bit8: 0x0, DLL reset=0 normal
# bit11-9: 0x6, auto-precharge write recovery ???????????? # bit11-9: 0x6, auto-precharge write recovery
# bit12: 0x0, PD must be zero # bit12: 0x0, PD must be zero
# bit31-13: 0x0, required # bit31-13: 0x0, required

View File

@ -11,7 +11,7 @@
# #
# Boot Media configurations # Boot Media configurations
BOOT_FROM nand # change from nand to uart if building UART image BOOT_FROM nand
NAND_ECC_MODE default NAND_ECC_MODE default
NAND_PAGE_SIZE 0x0800 NAND_PAGE_SIZE 0x0800
@ -21,12 +21,12 @@ NAND_PAGE_SIZE 0x0800
# Configure RGMII-0 interface pad voltage to 1.8V # Configure RGMII-0 interface pad voltage to 1.8V
DATA 0xffd100e0 0x1b1b1b9b DATA 0xffd100e0 0x1b1b1b9b
#Dram initalization for SINGLE x16 CL=5 @ 400MHz # Dram initalization for SINGLE x16 CL=5 @ 400MHz
DATA 0xffd01400 0x43000c30 # DDR Configuration register DATA 0xffd01400 0x43000c30 # DDR Configuration register
# bit13-0: 0xc30, (3120 DDR2 clks refresh rate) # bit13-0: 0xc30, (3120 DDR2 clks refresh rate)
# bit23-14: 0x0, # bit23-14: 0x0,
# bit24: 0x1, enable exit self refresh mode on DDR access # bit24: 0x1, enable exit self refresh mode on DDR access
# bit25: 0x1, required # bit25: 0x1, required
# bit29-26: 0x0, # bit29-26: 0x0,
# bit31-30: 0x1, # bit31-30: 0x1,
@ -64,10 +64,10 @@ DATA 0xffd01410 0x0000000c # DDR Address Control
# bit3-2: 11, Cs0size (1Gb) # bit3-2: 11, Cs0size (1Gb)
# bit5-4: 00, Cs1width (x8) # bit5-4: 00, Cs1width (x8)
# bit7-6: 11, Cs1size (1Gb) # bit7-6: 11, Cs1size (1Gb)
# bit9-8: 00, Cs2width (nonexistent # bit9-8: 00, Cs2width (nonexistent)
# bit11-10: 00, Cs2size (nonexistent # bit11-10: 00, Cs2size (nonexistent)
# bit13-12: 00, Cs3width (nonexistent # bit13-12: 00, Cs3width (nonexistent)
# bit15-14: 00, Cs3size (nonexistent # bit15-14: 00, Cs3size (nonexistent)
# bit16: 0, Cs0AddrSel # bit16: 0, Cs0AddrSel
# bit17: 0, Cs1AddrSel # bit17: 0, Cs1AddrSel
# bit18: 0, Cs2AddrSel # bit18: 0, Cs2AddrSel
@ -88,7 +88,7 @@ DATA 0xffd0141c 0x00000c52 # DDR Mode
# bit6-4: 0x4, CL=5 # bit6-4: 0x4, CL=5
# bit7: 0x0, TestMode=0 normal # bit7: 0x0, TestMode=0 normal
# bit8: 0x0, DLL reset=0 normal # bit8: 0x0, DLL reset=0 normal
# bit11-9: 0x6, auto-precharge write recovery ???????????? # bit11-9: 0x6, auto-precharge write recovery
# bit12: 0x0, PD must be zero # bit12: 0x0, PD must be zero
# bit31-13: 0x0, required # bit31-13: 0x0, required
@ -148,8 +148,8 @@ DATA 0xffd0149c 0x0000e803 # CPU ODT Control
DATA 0xffd01480 0x00000001 # DDR Initialization Control DATA 0xffd01480 0x00000001 # DDR Initialization Control
# bit0: 0x1, enable DDR init upon this register write # bit0: 0x1, enable DDR init upon this register write
DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register DATA 0xffd20134 0x66666666 # L2 RAM Timing 0 Register
DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register DATA 0xffd20138 0x66666666 # L2 RAM Timing 1 Register
# End of Header extension # End of Header extension
DATA 0x0 0x0 DATA 0x0 0x0

View File

@ -35,6 +35,10 @@
DECLARE_GLOBAL_DATA_PTR; DECLARE_GLOBAL_DATA_PTR;
#ifndef CONFIG_MVGBE_PORTS
# define CONFIG_MVGBE_PORTS {0, 0}
#endif
#define MV_PHY_ADR_REQUEST 0xee #define MV_PHY_ADR_REQUEST 0xee
#define MVGBE_SMI_REG (((struct mvgbe_registers *)MVGBE0_BASE)->smi) #define MVGBE_SMI_REG (((struct mvgbe_registers *)MVGBE0_BASE)->smi)

View File

@ -12,6 +12,8 @@
#ifndef _CONFIG_DOCKSTAR_H #ifndef _CONFIG_DOCKSTAR_H
#define _CONFIG_DOCKSTAR_H #define _CONFIG_DOCKSTAR_H
#define CONFIG_SYS_GENERIC_BOARD
/* /*
* Version number information * Version number information
*/ */

View File

@ -15,6 +15,8 @@
#ifndef _CONFIG_GOFLEXHOME_H #ifndef _CONFIG_GOFLEXHOME_H
#define _CONFIG_GOFLEXHOME_H #define _CONFIG_GOFLEXHOME_H
#define CONFIG_SYS_GENERIC_BOARD
/* /*
* Version number information * Version number information
*/ */

View File

@ -1,5 +1,6 @@
/* /*
* (C) Copyright 2009 * (C) Copyright 2009-2014
* Gerald Kerma <dreagle@doukki.net>
* Marvell Semiconductor <www.marvell.com> * Marvell Semiconductor <www.marvell.com>
* Written-by: Siddarth Gore <gores@marvell.com> * Written-by: Siddarth Gore <gores@marvell.com>
* *
@ -9,6 +10,8 @@
#ifndef _CONFIG_GURUPLUG_H #ifndef _CONFIG_GURUPLUG_H
#define _CONFIG_GURUPLUG_H #define _CONFIG_GURUPLUG_H
#define CONFIG_SYS_GENERIC_BOARD
/* /*
* Version number information * Version number information
*/ */
@ -22,18 +25,37 @@
#define CONFIG_MACH_GURUPLUG /* Machine type */ #define CONFIG_MACH_GURUPLUG /* Machine type */
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
/*
* Compression configuration
*/
#define CONFIG_BZIP2
#define CONFIG_LZMA
#define CONFIG_LZO
/*
* Enable device tree support
*/
#define CONFIG_OF_LIBFDT
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
/* /*
* Commands configuration * Commands configuration
*/ */
#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
#include <config_cmd_default.h> #include <config_cmd_default.h>
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_DHCP #define CONFIG_CMD_DHCP
#define CONFIG_CMD_ENV #define CONFIG_CMD_ENV
#define CONFIG_CMD_FAT #define CONFIG_CMD_IDE
#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND #define CONFIG_CMD_NAND
#define CONFIG_CMD_PING #define CONFIG_CMD_PING
#define CONFIG_CMD_USB #define CONFIG_CMD_USB
#define CONFIG_CMD_IDE #define CONFIG_CMD_FAT
/* /*
* mv-common.h should be defined after CMD configs since it used them * mv-common.h should be defined after CMD configs since it used them
@ -55,24 +77,38 @@
* it has to be rounded to sector size * it has to be rounded to sector size
*/ */
#define CONFIG_ENV_SIZE 0x20000 /* 128k */ #define CONFIG_ENV_SIZE 0x20000 /* 128k */
#define CONFIG_ENV_ADDR 0x60000 #define CONFIG_ENV_OFFSET 0xE0000 /* env starts here */
#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */
/* /*
* Default environment variables * Default environment variables
*/ */
#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ #define CONFIG_BOOTCOMMAND \
"${x_bootcmd_ethernet}; setenv ethact egiga1; " \ "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
"${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ "ubi part root; " \
"setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ "ubifsmount ubi:rootfs; " \
"bootm 0x6400000;" "ubifsload 0x800000 ${kernel}; " \
"ubifsload 0x700000 ${fdt}; " \
"ubifsumount; " \
"fdt addr 0x700000; fdt resize; fdt chosen; " \
"bootz 0x800000 - 0x700000"
#define CONFIG_EXTRA_ENV_SETTINGS \ #define CONFIG_MTDPARTS \
"x_bootcmd_ethernet=ping 192.168.2.1\0" \ "mtdparts=orion_nand:" \
"x_bootcmd_usb=usb start\0" \ "896K(uboot),128K(uboot_env)," \
"x_bootcmd_kernel=nand read.e 0x6400000 0x100000 0x400000\0" \ "-@1M(root)\0"
"x_bootargs=console=ttyS0,115200\0" \
"x_bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0" #define CONFIG_EXTRA_ENV_SETTINGS \
"console=console=ttyS0,115200\0" \
"mtdids=nand0=orion_nand\0" \
"mtdparts="CONFIG_MTDPARTS \
"kernel=/boot/zImage\0" \
"fdt=/boot/guruplug-server-plus.dtb\0" \
"bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0"
#define MTDIDS_DEFAULT "nand0=orion_nand"
#define MTDPARTS_DEFAULT \
"mtdparts="CONFIG_MTDPARTS
/* /*
* Ethernet Driver configuration * Ethernet Driver configuration
@ -89,6 +125,20 @@
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
#endif /*CONFIG_MVSATA_IDE*/ #endif /*CONFIG_MVSATA_IDE*/
/*
* File system
*/
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_FAT
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
#define CONFIG_RBTREE
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#define CONFIG_CMD_MTDPARTS
#define CONFIG_SYS_ALT_MEMTEST #define CONFIG_SYS_ALT_MEMTEST
#endif /* _CONFIG_GURUPLUG_H */ #endif /* _CONFIG_GURUPLUG_H */

View File

@ -9,6 +9,8 @@
#ifndef _CONFIG_IB62x0_H #ifndef _CONFIG_IB62x0_H
#define _CONFIG_IB62x0_H #define _CONFIG_IB62x0_H
#define CONFIG_SYS_GENERIC_BOARD
/* /*
* Version number information * Version number information
*/ */

View File

@ -9,6 +9,8 @@
#ifndef _CONFIG_ICONNECT_H #ifndef _CONFIG_ICONNECT_H
#define _CONFIG_ICONNECT_H #define _CONFIG_ICONNECT_H
#define CONFIG_SYS_GENERIC_BOARD
/* /*
* Version number information * Version number information
*/ */

View File

@ -13,6 +13,8 @@
#ifndef _CONFIG_POGO_E02_H #ifndef _CONFIG_POGO_E02_H
#define _CONFIG_POGO_E02_H #define _CONFIG_POGO_E02_H
#define CONFIG_SYS_GENERIC_BOARD
/* /*
* Machine type definition and ID * Machine type definition and ID
*/ */

View File

@ -10,6 +10,8 @@
#ifndef _CONFIG_SHEEVAPLUG_H #ifndef _CONFIG_SHEEVAPLUG_H
#define _CONFIG_SHEEVAPLUG_H #define _CONFIG_SHEEVAPLUG_H
#define CONFIG_SYS_GENERIC_BOARD
/* /*
* Version number information * Version number information
*/ */