linux/linux-5.18.11/drivers/usb/chipidea/ci_hdrc_tegra.c

420 lines
10 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2016, NVIDIA Corporation
*/
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include <linux/usb.h>
#include <linux/usb/chipidea.h>
#include <linux/usb/hcd.h>
#include <linux/usb/of.h>
#include <linux/usb/phy.h>
#include <soc/tegra/common.h>
#include "../host/ehci.h"
#include "ci.h"
struct tegra_usb {
struct ci_hdrc_platform_data data;
struct platform_device *dev;
const struct tegra_usb_soc_info *soc;
struct usb_phy *phy;
struct clk *clk;
bool needs_double_reset;
};
struct tegra_usb_soc_info {
unsigned long flags;
unsigned int txfifothresh;
enum usb_dr_mode dr_mode;
};
static const struct tegra_usb_soc_info tegra20_ehci_soc_info = {
.flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
CI_HDRC_OVERRIDE_PHY_CONTROL |
CI_HDRC_SUPPORTS_RUNTIME_PM,
.dr_mode = USB_DR_MODE_HOST,
.txfifothresh = 10,
};
static const struct tegra_usb_soc_info tegra30_ehci_soc_info = {
.flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
CI_HDRC_OVERRIDE_PHY_CONTROL |
CI_HDRC_SUPPORTS_RUNTIME_PM,
.dr_mode = USB_DR_MODE_HOST,
.txfifothresh = 16,
};
static const struct tegra_usb_soc_info tegra20_udc_soc_info = {
.flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
CI_HDRC_OVERRIDE_PHY_CONTROL |
CI_HDRC_SUPPORTS_RUNTIME_PM,
.dr_mode = USB_DR_MODE_UNKNOWN,
.txfifothresh = 10,
};
static const struct tegra_usb_soc_info tegra30_udc_soc_info = {
.flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
CI_HDRC_OVERRIDE_PHY_CONTROL |
CI_HDRC_SUPPORTS_RUNTIME_PM,
.dr_mode = USB_DR_MODE_UNKNOWN,
.txfifothresh = 16,
};
static const struct of_device_id tegra_usb_of_match[] = {
{
.compatible = "nvidia,tegra20-ehci",
.data = &tegra20_ehci_soc_info,
}, {
.compatible = "nvidia,tegra30-ehci",
.data = &tegra30_ehci_soc_info,
}, {
.compatible = "nvidia,tegra20-udc",
.data = &tegra20_udc_soc_info,
}, {
.compatible = "nvidia,tegra30-udc",
.data = &tegra30_udc_soc_info,
}, {
.compatible = "nvidia,tegra114-udc",
.data = &tegra30_udc_soc_info,
}, {
.compatible = "nvidia,tegra124-udc",
.data = &tegra30_udc_soc_info,
}, {
/* sentinel */
}
};
MODULE_DEVICE_TABLE(of, tegra_usb_of_match);
static int tegra_usb_reset_controller(struct device *dev)
{
struct reset_control *rst, *rst_utmi;
struct device_node *phy_np;
int err;
rst = devm_reset_control_get_shared(dev, "usb");
if (IS_ERR(rst)) {
dev_err(dev, "can't get ehci reset: %pe\n", rst);
return PTR_ERR(rst);
}
phy_np = of_parse_phandle(dev->of_node, "nvidia,phy", 0);
if (!phy_np)
return -ENOENT;
/*
* The 1st USB controller contains some UTMI pad registers that are
* global for all the controllers on the chip. Those registers are
* also cleared when reset is asserted to the 1st controller.
*/
rst_utmi = of_reset_control_get_shared(phy_np, "utmi-pads");
if (IS_ERR(rst_utmi)) {
dev_warn(dev, "can't get utmi-pads reset from the PHY\n");
dev_warn(dev, "continuing, but please update your DT\n");
} else {
/*
* PHY driver performs UTMI-pads reset in a case of a
* non-legacy DT.
*/
reset_control_put(rst_utmi);
}
of_node_put(phy_np);
/* reset control is shared, hence initialize it first */
err = reset_control_deassert(rst);
if (err)
return err;
err = reset_control_assert(rst);
if (err)
return err;
udelay(1);
err = reset_control_deassert(rst);
if (err)
return err;
return 0;
}
static int tegra_usb_notify_event(struct ci_hdrc *ci, unsigned int event)
{
struct tegra_usb *usb = dev_get_drvdata(ci->dev->parent);
struct ehci_hcd *ehci;
switch (event) {
case CI_HDRC_CONTROLLER_RESET_EVENT:
if (ci->hcd) {
ehci = hcd_to_ehci(ci->hcd);
ehci->has_tdi_phy_lpm = false;
ehci_writel(ehci, usb->soc->txfifothresh << 16,
&ehci->regs->txfill_tuning);
}
break;
}
return 0;
}
static int tegra_usb_internal_port_reset(struct ehci_hcd *ehci,
u32 __iomem *portsc_reg,
unsigned long *flags)
{
u32 saved_usbintr, temp;
unsigned int i, tries;
int retval = 0;
saved_usbintr = ehci_readl(ehci, &ehci->regs->intr_enable);
/* disable USB interrupt */
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
spin_unlock_irqrestore(&ehci->lock, *flags);
/*
* Here we have to do Port Reset at most twice for
* Port Enable bit to be set.
*/
for (i = 0; i < 2; i++) {
temp = ehci_readl(ehci, portsc_reg);
temp |= PORT_RESET;
ehci_writel(ehci, temp, portsc_reg);
fsleep(10000);
temp &= ~PORT_RESET;
ehci_writel(ehci, temp, portsc_reg);
fsleep(1000);
tries = 100;
do {
fsleep(1000);
/*
* Up to this point, Port Enable bit is
* expected to be set after 2 ms waiting.
* USB1 usually takes extra 45 ms, for safety,
* we take 100 ms as timeout.
*/
temp = ehci_readl(ehci, portsc_reg);
} while (!(temp & PORT_PE) && tries--);
if (temp & PORT_PE)
break;
}
if (i == 2)
retval = -ETIMEDOUT;
/*
* Clear Connect Status Change bit if it's set.
* We can't clear PORT_PEC. It will also cause PORT_PE to be cleared.
*/
if (temp & PORT_CSC)
ehci_writel(ehci, PORT_CSC, portsc_reg);
/*
* Write to clear any interrupt status bits that might be set
* during port reset.
*/
temp = ehci_readl(ehci, &ehci->regs->status);
ehci_writel(ehci, temp, &ehci->regs->status);
/* restore original interrupt-enable bits */
spin_lock_irqsave(&ehci->lock, *flags);
ehci_writel(ehci, saved_usbintr, &ehci->regs->intr_enable);
return retval;
}
static int tegra_ehci_hub_control(struct ci_hdrc *ci, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength,
bool *done, unsigned long *flags)
{
struct tegra_usb *usb = dev_get_drvdata(ci->dev->parent);
struct ehci_hcd *ehci = hcd_to_ehci(ci->hcd);
u32 __iomem *status_reg;
int retval = 0;
status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1];
switch (typeReq) {
case SetPortFeature:
if (wValue != USB_PORT_FEAT_RESET || !usb->needs_double_reset)
break;
/* for USB1 port we need to issue Port Reset twice internally */
retval = tegra_usb_internal_port_reset(ehci, status_reg, flags);
*done = true;
break;
}
return retval;
}
static void tegra_usb_enter_lpm(struct ci_hdrc *ci, bool enable)
{
/*
* Touching any register which belongs to AHB clock domain will
* hang CPU if USB controller is put into low power mode because
* AHB USB clock is gated on Tegra in the LPM.
*
* Tegra PHY has a separate register for checking the clock status
* and usb_phy_set_suspend() takes care of gating/ungating the clocks
* and restoring the PHY state on Tegra. Hence DEVLC/PORTSC registers
* shouldn't be touched directly by the CI driver.
*/
usb_phy_set_suspend(ci->usb_phy, enable);
}
static int tegra_usb_probe(struct platform_device *pdev)
{
const struct tegra_usb_soc_info *soc;
struct tegra_usb *usb;
int err;
usb = devm_kzalloc(&pdev->dev, sizeof(*usb), GFP_KERNEL);
if (!usb)
return -ENOMEM;
platform_set_drvdata(pdev, usb);
soc = of_device_get_match_data(&pdev->dev);
if (!soc) {
dev_err(&pdev->dev, "failed to match OF data\n");
return -EINVAL;
}
usb->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "nvidia,phy", 0);
if (IS_ERR(usb->phy))
return dev_err_probe(&pdev->dev, PTR_ERR(usb->phy),
"failed to get PHY\n");
usb->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(usb->clk)) {
err = PTR_ERR(usb->clk);
dev_err(&pdev->dev, "failed to get clock: %d\n", err);
return err;
}
err = devm_tegra_core_dev_init_opp_table_common(&pdev->dev);
if (err)
return err;
pm_runtime_enable(&pdev->dev);
err = pm_runtime_resume_and_get(&pdev->dev);
if (err)
return err;
if (device_property_present(&pdev->dev, "nvidia,needs-double-reset"))
usb->needs_double_reset = true;
err = tegra_usb_reset_controller(&pdev->dev);
if (err) {
dev_err(&pdev->dev, "failed to reset controller: %d\n", err);
goto fail_power_off;
}
/*
* USB controller registers shouldn't be touched before PHY is
* initialized, otherwise CPU will hang because clocks are gated.
* PHY driver controls gating of internal USB clocks on Tegra.
*/
err = usb_phy_init(usb->phy);
if (err)
goto fail_power_off;
/* setup and register ChipIdea HDRC device */
usb->soc = soc;
usb->data.name = "tegra-usb";
usb->data.flags = soc->flags;
usb->data.usb_phy = usb->phy;
usb->data.dr_mode = soc->dr_mode;
usb->data.capoffset = DEF_CAPOFFSET;
usb->data.enter_lpm = tegra_usb_enter_lpm;
usb->data.hub_control = tegra_ehci_hub_control;
usb->data.notify_event = tegra_usb_notify_event;
/* Tegra PHY driver currently doesn't support LPM for ULPI */
if (of_usb_get_phy_mode(pdev->dev.of_node) == USBPHY_INTERFACE_MODE_ULPI)
usb->data.flags &= ~CI_HDRC_SUPPORTS_RUNTIME_PM;
usb->dev = ci_hdrc_add_device(&pdev->dev, pdev->resource,
pdev->num_resources, &usb->data);
if (IS_ERR(usb->dev)) {
err = PTR_ERR(usb->dev);
dev_err(&pdev->dev, "failed to add HDRC device: %d\n", err);
goto phy_shutdown;
}
return 0;
phy_shutdown:
usb_phy_shutdown(usb->phy);
fail_power_off:
pm_runtime_put_sync_suspend(&pdev->dev);
pm_runtime_force_suspend(&pdev->dev);
return err;
}
static int tegra_usb_remove(struct platform_device *pdev)
{
struct tegra_usb *usb = platform_get_drvdata(pdev);
ci_hdrc_remove_device(usb->dev);
usb_phy_shutdown(usb->phy);
pm_runtime_put_sync_suspend(&pdev->dev);
pm_runtime_force_suspend(&pdev->dev);
return 0;
}
static int __maybe_unused tegra_usb_runtime_resume(struct device *dev)
{
struct tegra_usb *usb = dev_get_drvdata(dev);
int err;
err = clk_prepare_enable(usb->clk);
if (err < 0) {
dev_err(dev, "failed to enable clock: %d\n", err);
return err;
}
return 0;
}
static int __maybe_unused tegra_usb_runtime_suspend(struct device *dev)
{
struct tegra_usb *usb = dev_get_drvdata(dev);
clk_disable_unprepare(usb->clk);
return 0;
}
static const struct dev_pm_ops tegra_usb_pm = {
SET_RUNTIME_PM_OPS(tegra_usb_runtime_suspend, tegra_usb_runtime_resume,
NULL)
};
static struct platform_driver tegra_usb_driver = {
.driver = {
.name = "tegra-usb",
.of_match_table = tegra_usb_of_match,
.pm = &tegra_usb_pm,
},
.probe = tegra_usb_probe,
.remove = tegra_usb_remove,
};
module_platform_driver(tegra_usb_driver);
MODULE_DESCRIPTION("NVIDIA Tegra USB driver");
MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
MODULE_LICENSE("GPL v2");