linux/linux-5.18.11/drivers/regulator/rohm-regulator.c

134 lines
3.5 KiB
C

// SPDX-License-Identifier: GPL-2.0
// Copyright (C) 2020 ROHM Semiconductors
#include <linux/errno.h>
#include <linux/mfd/rohm-generic.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
static int set_dvs_level(const struct regulator_desc *desc,
struct device_node *np, struct regmap *regmap,
char *prop, unsigned int reg, unsigned int mask,
unsigned int omask, unsigned int oreg)
{
int ret, i;
uint32_t uv;
ret = of_property_read_u32(np, prop, &uv);
if (ret) {
if (ret != -EINVAL)
return ret;
return 0;
}
/* If voltage is set to 0 => disable */
if (uv == 0) {
if (omask)
return regmap_update_bits(regmap, oreg, omask, 0);
}
/* Some setups don't allow setting own voltage but do allow enabling */
if (!mask) {
if (omask)
return regmap_update_bits(regmap, oreg, omask, omask);
return -EINVAL;
}
for (i = 0; i < desc->n_voltages; i++) {
/* NOTE to next hacker - Does not support pickable ranges */
if (desc->linear_range_selectors)
return -EINVAL;
if (desc->n_linear_ranges)
ret = regulator_desc_list_voltage_linear_range(desc, i);
else
ret = regulator_desc_list_voltage_linear(desc, i);
if (ret < 0)
continue;
if (ret == uv) {
i <<= ffs(desc->vsel_mask) - 1;
ret = regmap_update_bits(regmap, reg, mask, i);
if (omask && !ret)
ret = regmap_update_bits(regmap, oreg, omask,
omask);
break;
}
}
return ret;
}
int rohm_regulator_set_dvs_levels(const struct rohm_dvs_config *dvs,
struct device_node *np,
const struct regulator_desc *desc,
struct regmap *regmap)
{
int i, ret = 0;
char *prop;
unsigned int reg, mask, omask, oreg = desc->enable_reg;
for (i = 0; i < ROHM_DVS_LEVEL_VALID_AMOUNT && !ret; i++) {
int bit;
bit = BIT(i);
if (dvs->level_map & bit) {
switch (bit) {
case ROHM_DVS_LEVEL_RUN:
prop = "rohm,dvs-run-voltage";
reg = dvs->run_reg;
mask = dvs->run_mask;
omask = dvs->run_on_mask;
break;
case ROHM_DVS_LEVEL_IDLE:
prop = "rohm,dvs-idle-voltage";
reg = dvs->idle_reg;
mask = dvs->idle_mask;
omask = dvs->idle_on_mask;
break;
case ROHM_DVS_LEVEL_SUSPEND:
prop = "rohm,dvs-suspend-voltage";
reg = dvs->suspend_reg;
mask = dvs->suspend_mask;
omask = dvs->suspend_on_mask;
break;
case ROHM_DVS_LEVEL_LPSR:
prop = "rohm,dvs-lpsr-voltage";
reg = dvs->lpsr_reg;
mask = dvs->lpsr_mask;
omask = dvs->lpsr_on_mask;
break;
case ROHM_DVS_LEVEL_SNVS:
prop = "rohm,dvs-snvs-voltage";
reg = dvs->snvs_reg;
mask = dvs->snvs_mask;
omask = dvs->snvs_on_mask;
break;
default:
return -EINVAL;
}
ret = set_dvs_level(desc, np, regmap, prop, reg, mask,
omask, oreg);
}
}
return ret;
}
EXPORT_SYMBOL(rohm_regulator_set_dvs_levels);
/*
* Few ROHM PMIC ICs have constrains on voltage changing:
* BD71837 - only buck 1-4 voltages can be changed when they are enabled.
* Other bucks and all LDOs must be disabled when voltage is changed.
* BD96801 - LDO voltage levels can be changed when LDOs are disabled.
*/
int rohm_regulator_set_voltage_sel_restricted(struct regulator_dev *rdev,
unsigned int sel)
{
if (rdev->desc->ops->is_enabled(rdev))
return -EBUSY;
return regulator_set_voltage_sel_regmap(rdev, sel);
}
EXPORT_SYMBOL_GPL(rohm_regulator_set_voltage_sel_restricted);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
MODULE_DESCRIPTION("Generic helpers for ROHM PMIC regulator drivers");