783 lines
20 KiB
C
783 lines
20 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Synopsys DesignWare PCIe host controller driver
|
|
*
|
|
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
|
|
* https://www.samsung.com
|
|
*
|
|
* Author: Jingoo Han <jg1.han@samsung.com>
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/types.h>
|
|
|
|
#include "../../pci.h"
|
|
#include "pcie-designware.h"
|
|
|
|
/*
|
|
* These interfaces resemble the pci_find_*capability() interfaces, but these
|
|
* are for configuring host controllers, which are bridges *to* PCI devices but
|
|
* are not PCI devices themselves.
|
|
*/
|
|
static u8 __dw_pcie_find_next_cap(struct dw_pcie *pci, u8 cap_ptr,
|
|
u8 cap)
|
|
{
|
|
u8 cap_id, next_cap_ptr;
|
|
u16 reg;
|
|
|
|
if (!cap_ptr)
|
|
return 0;
|
|
|
|
reg = dw_pcie_readw_dbi(pci, cap_ptr);
|
|
cap_id = (reg & 0x00ff);
|
|
|
|
if (cap_id > PCI_CAP_ID_MAX)
|
|
return 0;
|
|
|
|
if (cap_id == cap)
|
|
return cap_ptr;
|
|
|
|
next_cap_ptr = (reg & 0xff00) >> 8;
|
|
return __dw_pcie_find_next_cap(pci, next_cap_ptr, cap);
|
|
}
|
|
|
|
u8 dw_pcie_find_capability(struct dw_pcie *pci, u8 cap)
|
|
{
|
|
u8 next_cap_ptr;
|
|
u16 reg;
|
|
|
|
reg = dw_pcie_readw_dbi(pci, PCI_CAPABILITY_LIST);
|
|
next_cap_ptr = (reg & 0x00ff);
|
|
|
|
return __dw_pcie_find_next_cap(pci, next_cap_ptr, cap);
|
|
}
|
|
EXPORT_SYMBOL_GPL(dw_pcie_find_capability);
|
|
|
|
static u16 dw_pcie_find_next_ext_capability(struct dw_pcie *pci, u16 start,
|
|
u8 cap)
|
|
{
|
|
u32 header;
|
|
int ttl;
|
|
int pos = PCI_CFG_SPACE_SIZE;
|
|
|
|
/* minimum 8 bytes per capability */
|
|
ttl = (PCI_CFG_SPACE_EXP_SIZE - PCI_CFG_SPACE_SIZE) / 8;
|
|
|
|
if (start)
|
|
pos = start;
|
|
|
|
header = dw_pcie_readl_dbi(pci, pos);
|
|
/*
|
|
* If we have no capabilities, this is indicated by cap ID,
|
|
* cap version and next pointer all being 0.
|
|
*/
|
|
if (header == 0)
|
|
return 0;
|
|
|
|
while (ttl-- > 0) {
|
|
if (PCI_EXT_CAP_ID(header) == cap && pos != start)
|
|
return pos;
|
|
|
|
pos = PCI_EXT_CAP_NEXT(header);
|
|
if (pos < PCI_CFG_SPACE_SIZE)
|
|
break;
|
|
|
|
header = dw_pcie_readl_dbi(pci, pos);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
u16 dw_pcie_find_ext_capability(struct dw_pcie *pci, u8 cap)
|
|
{
|
|
return dw_pcie_find_next_ext_capability(pci, 0, cap);
|
|
}
|
|
EXPORT_SYMBOL_GPL(dw_pcie_find_ext_capability);
|
|
|
|
int dw_pcie_read(void __iomem *addr, int size, u32 *val)
|
|
{
|
|
if (!IS_ALIGNED((uintptr_t)addr, size)) {
|
|
*val = 0;
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
}
|
|
|
|
if (size == 4) {
|
|
*val = readl(addr);
|
|
} else if (size == 2) {
|
|
*val = readw(addr);
|
|
} else if (size == 1) {
|
|
*val = readb(addr);
|
|
} else {
|
|
*val = 0;
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
}
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(dw_pcie_read);
|
|
|
|
int dw_pcie_write(void __iomem *addr, int size, u32 val)
|
|
{
|
|
if (!IS_ALIGNED((uintptr_t)addr, size))
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
|
|
if (size == 4)
|
|
writel(val, addr);
|
|
else if (size == 2)
|
|
writew(val, addr);
|
|
else if (size == 1)
|
|
writeb(val, addr);
|
|
else
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(dw_pcie_write);
|
|
|
|
u32 dw_pcie_read_dbi(struct dw_pcie *pci, u32 reg, size_t size)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
if (pci->ops && pci->ops->read_dbi)
|
|
return pci->ops->read_dbi(pci, pci->dbi_base, reg, size);
|
|
|
|
ret = dw_pcie_read(pci->dbi_base + reg, size, &val);
|
|
if (ret)
|
|
dev_err(pci->dev, "Read DBI address failed\n");
|
|
|
|
return val;
|
|
}
|
|
EXPORT_SYMBOL_GPL(dw_pcie_read_dbi);
|
|
|
|
void dw_pcie_write_dbi(struct dw_pcie *pci, u32 reg, size_t size, u32 val)
|
|
{
|
|
int ret;
|
|
|
|
if (pci->ops && pci->ops->write_dbi) {
|
|
pci->ops->write_dbi(pci, pci->dbi_base, reg, size, val);
|
|
return;
|
|
}
|
|
|
|
ret = dw_pcie_write(pci->dbi_base + reg, size, val);
|
|
if (ret)
|
|
dev_err(pci->dev, "Write DBI address failed\n");
|
|
}
|
|
EXPORT_SYMBOL_GPL(dw_pcie_write_dbi);
|
|
|
|
void dw_pcie_write_dbi2(struct dw_pcie *pci, u32 reg, size_t size, u32 val)
|
|
{
|
|
int ret;
|
|
|
|
if (pci->ops && pci->ops->write_dbi2) {
|
|
pci->ops->write_dbi2(pci, pci->dbi_base2, reg, size, val);
|
|
return;
|
|
}
|
|
|
|
ret = dw_pcie_write(pci->dbi_base2 + reg, size, val);
|
|
if (ret)
|
|
dev_err(pci->dev, "write DBI address failed\n");
|
|
}
|
|
|
|
static u32 dw_pcie_readl_atu(struct dw_pcie *pci, u32 reg)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
if (pci->ops && pci->ops->read_dbi)
|
|
return pci->ops->read_dbi(pci, pci->atu_base, reg, 4);
|
|
|
|
ret = dw_pcie_read(pci->atu_base + reg, 4, &val);
|
|
if (ret)
|
|
dev_err(pci->dev, "Read ATU address failed\n");
|
|
|
|
return val;
|
|
}
|
|
|
|
static void dw_pcie_writel_atu(struct dw_pcie *pci, u32 reg, u32 val)
|
|
{
|
|
int ret;
|
|
|
|
if (pci->ops && pci->ops->write_dbi) {
|
|
pci->ops->write_dbi(pci, pci->atu_base, reg, 4, val);
|
|
return;
|
|
}
|
|
|
|
ret = dw_pcie_write(pci->atu_base + reg, 4, val);
|
|
if (ret)
|
|
dev_err(pci->dev, "Write ATU address failed\n");
|
|
}
|
|
|
|
static u32 dw_pcie_readl_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg)
|
|
{
|
|
u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
|
|
|
|
return dw_pcie_readl_atu(pci, offset + reg);
|
|
}
|
|
|
|
static void dw_pcie_writel_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg,
|
|
u32 val)
|
|
{
|
|
u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
|
|
|
|
dw_pcie_writel_atu(pci, offset + reg, val);
|
|
}
|
|
|
|
static inline u32 dw_pcie_enable_ecrc(u32 val)
|
|
{
|
|
/*
|
|
* DesignWare core version 4.90A has a design issue where the 'TD'
|
|
* bit in the Control register-1 of the ATU outbound region acts
|
|
* like an override for the ECRC setting, i.e., the presence of TLP
|
|
* Digest (ECRC) in the outgoing TLPs is solely determined by this
|
|
* bit. This is contrary to the PCIe spec which says that the
|
|
* enablement of the ECRC is solely determined by the AER
|
|
* registers.
|
|
*
|
|
* Because of this, even when the ECRC is enabled through AER
|
|
* registers, the transactions going through ATU won't have TLP
|
|
* Digest as there is no way the PCI core AER code could program
|
|
* the TD bit which is specific to the DesignWare core.
|
|
*
|
|
* The best way to handle this scenario is to program the TD bit
|
|
* always. It affects only the traffic from root port to downstream
|
|
* devices.
|
|
*
|
|
* At this point,
|
|
* When ECRC is enabled in AER registers, everything works normally
|
|
* When ECRC is NOT enabled in AER registers, then,
|
|
* on Root Port:- TLP Digest (DWord size) gets appended to each packet
|
|
* even through it is not required. Since downstream
|
|
* TLPs are mostly for configuration accesses and BAR
|
|
* accesses, they are not in critical path and won't
|
|
* have much negative effect on the performance.
|
|
* on End Point:- TLP Digest is received for some/all the packets coming
|
|
* from the root port. TLP Digest is ignored because,
|
|
* as per the PCIe Spec r5.0 v1.0 section 2.2.3
|
|
* "TLP Digest Rules", when an endpoint receives TLP
|
|
* Digest when its ECRC check functionality is disabled
|
|
* in AER registers, received TLP Digest is just ignored.
|
|
* Since there is no issue or error reported either side, best way to
|
|
* handle the scenario is to program TD bit by default.
|
|
*/
|
|
|
|
return val | PCIE_ATU_TD;
|
|
}
|
|
|
|
static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, u8 func_no,
|
|
int index, int type,
|
|
u64 cpu_addr, u64 pci_addr,
|
|
u64 size)
|
|
{
|
|
u32 retries, val;
|
|
u64 limit_addr = cpu_addr + size - 1;
|
|
|
|
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE,
|
|
lower_32_bits(cpu_addr));
|
|
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_BASE,
|
|
upper_32_bits(cpu_addr));
|
|
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_LIMIT,
|
|
lower_32_bits(limit_addr));
|
|
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_LIMIT,
|
|
upper_32_bits(limit_addr));
|
|
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
|
|
lower_32_bits(pci_addr));
|
|
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
|
|
upper_32_bits(pci_addr));
|
|
val = type | PCIE_ATU_FUNC_NUM(func_no);
|
|
val = upper_32_bits(size - 1) ?
|
|
val | PCIE_ATU_INCREASE_REGION_SIZE : val;
|
|
if (pci->version == 0x490A)
|
|
val = dw_pcie_enable_ecrc(val);
|
|
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, val);
|
|
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
|
|
PCIE_ATU_ENABLE);
|
|
|
|
/*
|
|
* Make sure ATU enable takes effect before any subsequent config
|
|
* and I/O accesses.
|
|
*/
|
|
for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
|
|
val = dw_pcie_readl_ob_unroll(pci, index,
|
|
PCIE_ATU_UNR_REGION_CTRL2);
|
|
if (val & PCIE_ATU_ENABLE)
|
|
return;
|
|
|
|
mdelay(LINK_WAIT_IATU);
|
|
}
|
|
dev_err(pci->dev, "Outbound iATU is not being enabled\n");
|
|
}
|
|
|
|
static void __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no,
|
|
int index, int type, u64 cpu_addr,
|
|
u64 pci_addr, u64 size)
|
|
{
|
|
u32 retries, val;
|
|
|
|
if (pci->ops && pci->ops->cpu_addr_fixup)
|
|
cpu_addr = pci->ops->cpu_addr_fixup(pci, cpu_addr);
|
|
|
|
if (pci->iatu_unroll_enabled) {
|
|
dw_pcie_prog_outbound_atu_unroll(pci, func_no, index, type,
|
|
cpu_addr, pci_addr, size);
|
|
return;
|
|
}
|
|
|
|
dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
|
|
PCIE_ATU_REGION_OUTBOUND | index);
|
|
dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_BASE,
|
|
lower_32_bits(cpu_addr));
|
|
dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_BASE,
|
|
upper_32_bits(cpu_addr));
|
|
dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
|
|
lower_32_bits(cpu_addr + size - 1));
|
|
if (pci->version >= 0x460A)
|
|
dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_LIMIT,
|
|
upper_32_bits(cpu_addr + size - 1));
|
|
dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
|
|
lower_32_bits(pci_addr));
|
|
dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
|
|
upper_32_bits(pci_addr));
|
|
val = type | PCIE_ATU_FUNC_NUM(func_no);
|
|
val = ((upper_32_bits(size - 1)) && (pci->version >= 0x460A)) ?
|
|
val | PCIE_ATU_INCREASE_REGION_SIZE : val;
|
|
if (pci->version == 0x490A)
|
|
val = dw_pcie_enable_ecrc(val);
|
|
dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, val);
|
|
dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
|
|
|
|
/*
|
|
* Make sure ATU enable takes effect before any subsequent config
|
|
* and I/O accesses.
|
|
*/
|
|
for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
|
|
val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
|
|
if (val & PCIE_ATU_ENABLE)
|
|
return;
|
|
|
|
mdelay(LINK_WAIT_IATU);
|
|
}
|
|
dev_err(pci->dev, "Outbound iATU is not being enabled\n");
|
|
}
|
|
|
|
void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
|
|
u64 cpu_addr, u64 pci_addr, u64 size)
|
|
{
|
|
__dw_pcie_prog_outbound_atu(pci, 0, index, type,
|
|
cpu_addr, pci_addr, size);
|
|
}
|
|
|
|
void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int index,
|
|
int type, u64 cpu_addr, u64 pci_addr,
|
|
u64 size)
|
|
{
|
|
__dw_pcie_prog_outbound_atu(pci, func_no, index, type,
|
|
cpu_addr, pci_addr, size);
|
|
}
|
|
|
|
static u32 dw_pcie_readl_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg)
|
|
{
|
|
u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index);
|
|
|
|
return dw_pcie_readl_atu(pci, offset + reg);
|
|
}
|
|
|
|
static void dw_pcie_writel_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg,
|
|
u32 val)
|
|
{
|
|
u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index);
|
|
|
|
dw_pcie_writel_atu(pci, offset + reg, val);
|
|
}
|
|
|
|
static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, u8 func_no,
|
|
int index, int bar, u64 cpu_addr,
|
|
enum dw_pcie_as_type as_type)
|
|
{
|
|
int type;
|
|
u32 retries, val;
|
|
|
|
dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
|
|
lower_32_bits(cpu_addr));
|
|
dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
|
|
upper_32_bits(cpu_addr));
|
|
|
|
switch (as_type) {
|
|
case DW_PCIE_AS_MEM:
|
|
type = PCIE_ATU_TYPE_MEM;
|
|
break;
|
|
case DW_PCIE_AS_IO:
|
|
type = PCIE_ATU_TYPE_IO;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, type |
|
|
PCIE_ATU_FUNC_NUM(func_no));
|
|
dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
|
|
PCIE_ATU_FUNC_NUM_MATCH_EN |
|
|
PCIE_ATU_ENABLE |
|
|
PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
|
|
|
|
/*
|
|
* Make sure ATU enable takes effect before any subsequent config
|
|
* and I/O accesses.
|
|
*/
|
|
for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
|
|
val = dw_pcie_readl_ib_unroll(pci, index,
|
|
PCIE_ATU_UNR_REGION_CTRL2);
|
|
if (val & PCIE_ATU_ENABLE)
|
|
return 0;
|
|
|
|
mdelay(LINK_WAIT_IATU);
|
|
}
|
|
dev_err(pci->dev, "Inbound iATU is not being enabled\n");
|
|
|
|
return -EBUSY;
|
|
}
|
|
|
|
int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
|
|
int bar, u64 cpu_addr,
|
|
enum dw_pcie_as_type as_type)
|
|
{
|
|
int type;
|
|
u32 retries, val;
|
|
|
|
if (pci->iatu_unroll_enabled)
|
|
return dw_pcie_prog_inbound_atu_unroll(pci, func_no, index, bar,
|
|
cpu_addr, as_type);
|
|
|
|
dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, PCIE_ATU_REGION_INBOUND |
|
|
index);
|
|
dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET, lower_32_bits(cpu_addr));
|
|
dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET, upper_32_bits(cpu_addr));
|
|
|
|
switch (as_type) {
|
|
case DW_PCIE_AS_MEM:
|
|
type = PCIE_ATU_TYPE_MEM;
|
|
break;
|
|
case DW_PCIE_AS_IO:
|
|
type = PCIE_ATU_TYPE_IO;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
|
|
PCIE_ATU_FUNC_NUM(func_no));
|
|
dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE |
|
|
PCIE_ATU_FUNC_NUM_MATCH_EN |
|
|
PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
|
|
|
|
/*
|
|
* Make sure ATU enable takes effect before any subsequent config
|
|
* and I/O accesses.
|
|
*/
|
|
for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
|
|
val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
|
|
if (val & PCIE_ATU_ENABLE)
|
|
return 0;
|
|
|
|
mdelay(LINK_WAIT_IATU);
|
|
}
|
|
dev_err(pci->dev, "Inbound iATU is not being enabled\n");
|
|
|
|
return -EBUSY;
|
|
}
|
|
|
|
void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
|
|
enum dw_pcie_region_type type)
|
|
{
|
|
int region;
|
|
|
|
switch (type) {
|
|
case DW_PCIE_REGION_INBOUND:
|
|
region = PCIE_ATU_REGION_INBOUND;
|
|
break;
|
|
case DW_PCIE_REGION_OUTBOUND:
|
|
region = PCIE_ATU_REGION_OUTBOUND;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, region | index);
|
|
dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, ~(u32)PCIE_ATU_ENABLE);
|
|
}
|
|
|
|
int dw_pcie_wait_for_link(struct dw_pcie *pci)
|
|
{
|
|
int retries;
|
|
|
|
/* Check if the link is up or not */
|
|
for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
|
|
if (dw_pcie_link_up(pci)) {
|
|
dev_info(pci->dev, "Link up\n");
|
|
return 0;
|
|
}
|
|
usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
|
|
}
|
|
|
|
dev_info(pci->dev, "Phy link never came up\n");
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
EXPORT_SYMBOL_GPL(dw_pcie_wait_for_link);
|
|
|
|
int dw_pcie_link_up(struct dw_pcie *pci)
|
|
{
|
|
u32 val;
|
|
|
|
if (pci->ops && pci->ops->link_up)
|
|
return pci->ops->link_up(pci);
|
|
|
|
val = readl(pci->dbi_base + PCIE_PORT_DEBUG1);
|
|
return ((val & PCIE_PORT_DEBUG1_LINK_UP) &&
|
|
(!(val & PCIE_PORT_DEBUG1_LINK_IN_TRAINING)));
|
|
}
|
|
EXPORT_SYMBOL_GPL(dw_pcie_link_up);
|
|
|
|
void dw_pcie_upconfig_setup(struct dw_pcie *pci)
|
|
{
|
|
u32 val;
|
|
|
|
val = dw_pcie_readl_dbi(pci, PCIE_PORT_MULTI_LANE_CTRL);
|
|
val |= PORT_MLTI_UPCFG_SUPPORT;
|
|
dw_pcie_writel_dbi(pci, PCIE_PORT_MULTI_LANE_CTRL, val);
|
|
}
|
|
EXPORT_SYMBOL_GPL(dw_pcie_upconfig_setup);
|
|
|
|
static void dw_pcie_link_set_max_speed(struct dw_pcie *pci, u32 link_gen)
|
|
{
|
|
u32 cap, ctrl2, link_speed;
|
|
u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
|
|
|
|
cap = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
|
|
ctrl2 = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCTL2);
|
|
ctrl2 &= ~PCI_EXP_LNKCTL2_TLS;
|
|
|
|
switch (pcie_link_speed[link_gen]) {
|
|
case PCIE_SPEED_2_5GT:
|
|
link_speed = PCI_EXP_LNKCTL2_TLS_2_5GT;
|
|
break;
|
|
case PCIE_SPEED_5_0GT:
|
|
link_speed = PCI_EXP_LNKCTL2_TLS_5_0GT;
|
|
break;
|
|
case PCIE_SPEED_8_0GT:
|
|
link_speed = PCI_EXP_LNKCTL2_TLS_8_0GT;
|
|
break;
|
|
case PCIE_SPEED_16_0GT:
|
|
link_speed = PCI_EXP_LNKCTL2_TLS_16_0GT;
|
|
break;
|
|
default:
|
|
/* Use hardware capability */
|
|
link_speed = FIELD_GET(PCI_EXP_LNKCAP_SLS, cap);
|
|
ctrl2 &= ~PCI_EXP_LNKCTL2_HASD;
|
|
break;
|
|
}
|
|
|
|
dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCTL2, ctrl2 | link_speed);
|
|
|
|
cap &= ~((u32)PCI_EXP_LNKCAP_SLS);
|
|
dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, cap | link_speed);
|
|
|
|
}
|
|
|
|
static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci)
|
|
{
|
|
u32 val;
|
|
|
|
val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT);
|
|
if (val == 0xffffffff)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dw_pcie_iatu_detect_regions_unroll(struct dw_pcie *pci)
|
|
{
|
|
int max_region, i, ob = 0, ib = 0;
|
|
u32 val;
|
|
|
|
max_region = min((int)pci->atu_size / 512, 256);
|
|
|
|
for (i = 0; i < max_region; i++) {
|
|
dw_pcie_writel_ob_unroll(pci, i, PCIE_ATU_UNR_LOWER_TARGET,
|
|
0x11110000);
|
|
|
|
val = dw_pcie_readl_ob_unroll(pci, i, PCIE_ATU_UNR_LOWER_TARGET);
|
|
if (val == 0x11110000)
|
|
ob++;
|
|
else
|
|
break;
|
|
}
|
|
|
|
for (i = 0; i < max_region; i++) {
|
|
dw_pcie_writel_ib_unroll(pci, i, PCIE_ATU_UNR_LOWER_TARGET,
|
|
0x11110000);
|
|
|
|
val = dw_pcie_readl_ib_unroll(pci, i, PCIE_ATU_UNR_LOWER_TARGET);
|
|
if (val == 0x11110000)
|
|
ib++;
|
|
else
|
|
break;
|
|
}
|
|
pci->num_ib_windows = ib;
|
|
pci->num_ob_windows = ob;
|
|
}
|
|
|
|
static void dw_pcie_iatu_detect_regions(struct dw_pcie *pci)
|
|
{
|
|
int max_region, i, ob = 0, ib = 0;
|
|
u32 val;
|
|
|
|
dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, 0xFF);
|
|
max_region = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT) + 1;
|
|
|
|
for (i = 0; i < max_region; i++) {
|
|
dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, PCIE_ATU_REGION_OUTBOUND | i);
|
|
dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET, 0x11110000);
|
|
val = dw_pcie_readl_dbi(pci, PCIE_ATU_LOWER_TARGET);
|
|
if (val == 0x11110000)
|
|
ob++;
|
|
else
|
|
break;
|
|
}
|
|
|
|
for (i = 0; i < max_region; i++) {
|
|
dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, PCIE_ATU_REGION_INBOUND | i);
|
|
dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET, 0x11110000);
|
|
val = dw_pcie_readl_dbi(pci, PCIE_ATU_LOWER_TARGET);
|
|
if (val == 0x11110000)
|
|
ib++;
|
|
else
|
|
break;
|
|
}
|
|
|
|
pci->num_ib_windows = ib;
|
|
pci->num_ob_windows = ob;
|
|
}
|
|
|
|
void dw_pcie_iatu_detect(struct dw_pcie *pci)
|
|
{
|
|
struct device *dev = pci->dev;
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
|
|
if (pci->version >= 0x480A || (!pci->version &&
|
|
dw_pcie_iatu_unroll_enabled(pci))) {
|
|
pci->iatu_unroll_enabled = true;
|
|
if (!pci->atu_base) {
|
|
struct resource *res =
|
|
platform_get_resource_byname(pdev, IORESOURCE_MEM, "atu");
|
|
if (res) {
|
|
pci->atu_size = resource_size(res);
|
|
pci->atu_base = devm_ioremap_resource(dev, res);
|
|
}
|
|
if (!pci->atu_base || IS_ERR(pci->atu_base))
|
|
pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET;
|
|
}
|
|
|
|
if (!pci->atu_size)
|
|
/* Pick a minimal default, enough for 8 in and 8 out windows */
|
|
pci->atu_size = SZ_4K;
|
|
|
|
dw_pcie_iatu_detect_regions_unroll(pci);
|
|
} else
|
|
dw_pcie_iatu_detect_regions(pci);
|
|
|
|
dev_info(pci->dev, "iATU unroll: %s\n", pci->iatu_unroll_enabled ?
|
|
"enabled" : "disabled");
|
|
|
|
dev_info(pci->dev, "Detected iATU regions: %u outbound, %u inbound",
|
|
pci->num_ob_windows, pci->num_ib_windows);
|
|
}
|
|
|
|
void dw_pcie_setup(struct dw_pcie *pci)
|
|
{
|
|
u32 val;
|
|
struct device *dev = pci->dev;
|
|
struct device_node *np = dev->of_node;
|
|
|
|
if (pci->link_gen > 0)
|
|
dw_pcie_link_set_max_speed(pci, pci->link_gen);
|
|
|
|
/* Configure Gen1 N_FTS */
|
|
if (pci->n_fts[0]) {
|
|
val = dw_pcie_readl_dbi(pci, PCIE_PORT_AFR);
|
|
val &= ~(PORT_AFR_N_FTS_MASK | PORT_AFR_CC_N_FTS_MASK);
|
|
val |= PORT_AFR_N_FTS(pci->n_fts[0]);
|
|
val |= PORT_AFR_CC_N_FTS(pci->n_fts[0]);
|
|
dw_pcie_writel_dbi(pci, PCIE_PORT_AFR, val);
|
|
}
|
|
|
|
/* Configure Gen2+ N_FTS */
|
|
if (pci->n_fts[1]) {
|
|
val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
|
|
val &= ~PORT_LOGIC_N_FTS_MASK;
|
|
val |= pci->n_fts[pci->link_gen - 1];
|
|
dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
|
|
}
|
|
|
|
val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL);
|
|
val &= ~PORT_LINK_FAST_LINK_MODE;
|
|
val |= PORT_LINK_DLL_LINK_EN;
|
|
dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val);
|
|
|
|
of_property_read_u32(np, "num-lanes", &pci->num_lanes);
|
|
if (!pci->num_lanes) {
|
|
dev_dbg(pci->dev, "Using h/w default number of lanes\n");
|
|
return;
|
|
}
|
|
|
|
/* Set the number of lanes */
|
|
val &= ~PORT_LINK_FAST_LINK_MODE;
|
|
val &= ~PORT_LINK_MODE_MASK;
|
|
switch (pci->num_lanes) {
|
|
case 1:
|
|
val |= PORT_LINK_MODE_1_LANES;
|
|
break;
|
|
case 2:
|
|
val |= PORT_LINK_MODE_2_LANES;
|
|
break;
|
|
case 4:
|
|
val |= PORT_LINK_MODE_4_LANES;
|
|
break;
|
|
case 8:
|
|
val |= PORT_LINK_MODE_8_LANES;
|
|
break;
|
|
default:
|
|
dev_err(pci->dev, "num-lanes %u: invalid value\n", pci->num_lanes);
|
|
return;
|
|
}
|
|
dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val);
|
|
|
|
/* Set link width speed control register */
|
|
val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
|
|
val &= ~PORT_LOGIC_LINK_WIDTH_MASK;
|
|
switch (pci->num_lanes) {
|
|
case 1:
|
|
val |= PORT_LOGIC_LINK_WIDTH_1_LANES;
|
|
break;
|
|
case 2:
|
|
val |= PORT_LOGIC_LINK_WIDTH_2_LANES;
|
|
break;
|
|
case 4:
|
|
val |= PORT_LOGIC_LINK_WIDTH_4_LANES;
|
|
break;
|
|
case 8:
|
|
val |= PORT_LOGIC_LINK_WIDTH_8_LANES;
|
|
break;
|
|
}
|
|
dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
|
|
|
|
if (of_property_read_bool(np, "snps,enable-cdm-check")) {
|
|
val = dw_pcie_readl_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS);
|
|
val |= PCIE_PL_CHK_REG_CHK_REG_CONTINUOUS |
|
|
PCIE_PL_CHK_REG_CHK_REG_START;
|
|
dw_pcie_writel_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS, val);
|
|
}
|
|
}
|