linux/linux-5.18.11/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h

92 lines
3.7 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* SPDX-License-Identifier: GPL-2.0-only */
/******************************************************************************
PTP Header file
Copyright (C) 2013 Vayavya Labs Pvt Ltd
Author: Rayagond Kokatanur <rayagond@vayavyalabs.com>
******************************************************************************/
#ifndef __STMMAC_PTP_H__
#define __STMMAC_PTP_H__
#define PTP_XGMAC_OFFSET 0xd00
#define PTP_GMAC4_OFFSET 0xb00
#define PTP_GMAC3_X_OFFSET 0x700
/* IEEE 1588 PTP register offsets */
#define PTP_TCR 0x00 /* Timestamp Control Reg */
#define PTP_SSIR 0x04 /* Sub-Second Increment Reg */
#define PTP_STSR 0x08 /* System Time Seconds Regr */
#define PTP_STNSR 0x0c /* System Time Nanoseconds Reg */
#define PTP_STSUR 0x10 /* System Time Seconds Update Reg */
#define PTP_STNSUR 0x14 /* System Time Nanoseconds Update Reg */
#define PTP_TAR 0x18 /* Timestamp Addend Reg */
#define PTP_ACR 0x40 /* Auxiliary Control Reg */
#define PTP_ATNR 0x48 /* Auxiliary Timestamp - Nanoseconds Reg */
#define PTP_ATSR 0x4c /* Auxiliary Timestamp - Seconds Reg */
#define PTP_STNSUR_ADDSUB_SHIFT 31
#define PTP_DIGITAL_ROLLOVER_MODE 0x3B9ACA00 /* 10e9-1 ns */
#define PTP_BINARY_ROLLOVER_MODE 0x80000000 /* ~0.466 ns */
/* PTP Timestamp control register defines */
#define PTP_TCR_TSENA BIT(0) /* Timestamp Enable */
#define PTP_TCR_TSCFUPDT BIT(1) /* Timestamp Fine/Coarse Update */
#define PTP_TCR_TSINIT BIT(2) /* Timestamp Initialize */
#define PTP_TCR_TSUPDT BIT(3) /* Timestamp Update */
#define PTP_TCR_TSTRIG BIT(4) /* Timestamp Interrupt Trigger Enable */
#define PTP_TCR_TSADDREG BIT(5) /* Addend Reg Update */
#define PTP_TCR_TSENALL BIT(8) /* Enable Timestamp for All Frames */
#define PTP_TCR_TSCTRLSSR BIT(9) /* Digital or Binary Rollover Control */
/* Enable PTP packet Processing for Version 2 Format */
#define PTP_TCR_TSVER2ENA BIT(10)
/* Enable Processing of PTP over Ethernet Frames */
#define PTP_TCR_TSIPENA BIT(11)
/* Enable Processing of PTP Frames Sent over IPv6-UDP */
#define PTP_TCR_TSIPV6ENA BIT(12)
/* Enable Processing of PTP Frames Sent over IPv4-UDP */
#define PTP_TCR_TSIPV4ENA BIT(13)
/* Enable Timestamp Snapshot for Event Messages */
#define PTP_TCR_TSEVNTENA BIT(14)
/* Enable Snapshot for Messages Relevant to Master */
#define PTP_TCR_TSMSTRENA BIT(15)
/* Select PTP packets for Taking Snapshots
* On gmac4 specifically:
* Enable SYNC, Pdelay_Req, Pdelay_Resp when TSEVNTENA is enabled.
* or
* Enable SYNC, Follow_Up, Delay_Req, Delay_Resp, Pdelay_Req, Pdelay_Resp,
* Pdelay_Resp_Follow_Up if TSEVNTENA is disabled
*/
#define PTP_TCR_SNAPTYPSEL_1 BIT(16)
/* Enable MAC address for PTP Frame Filtering */
#define PTP_TCR_TSENMACADDR BIT(18)
/* SSIR defines */
#define PTP_SSIR_SSINC_MASK 0xff
#define GMAC4_PTP_SSIR_SSINC_SHIFT 16
/* Auxiliary Control defines */
#define PTP_ACR_ATSFC BIT(0) /* Auxiliary Snapshot FIFO Clear */
#define PTP_ACR_ATSEN0 BIT(4) /* Auxiliary Snapshot 0 Enable */
#define PTP_ACR_ATSEN1 BIT(5) /* Auxiliary Snapshot 1 Enable */
#define PTP_ACR_ATSEN2 BIT(6) /* Auxiliary Snapshot 2 Enable */
#define PTP_ACR_ATSEN3 BIT(7) /* Auxiliary Snapshot 3 Enable */
#define PTP_ACR_ATSEN_SHIFT 5 /* Auxiliary Snapshot shift */
#define PTP_ACR_MASK GENMASK(7, 4) /* Aux Snapshot Mask */
#define PMC_ART_VALUE0 0x01 /* PMC_ART[15:0] timer value */
#define PMC_ART_VALUE1 0x02 /* PMC_ART[31:16] timer value */
#define PMC_ART_VALUE2 0x03 /* PMC_ART[47:32] timer value */
#define PMC_ART_VALUE3 0x04 /* PMC_ART[63:48] timer value */
#define GMAC4_ART_TIME_SHIFT 16 /* ART TIME 16-bits shift */
enum aux_snapshot {
AUX_SNAPSHOT0 = 0x10,
AUX_SNAPSHOT1 = 0x20,
AUX_SNAPSHOT2 = 0x40,
AUX_SNAPSHOT3 = 0x80,
};
#endif /* __STMMAC_PTP_H__ */