748 lines
22 KiB
C
748 lines
22 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2018 MediaTek Inc.
|
|
*/
|
|
#include <linux/bitfield.h>
|
|
#include <linux/io.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_net.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/stmmac.h>
|
|
|
|
#include "stmmac.h"
|
|
#include "stmmac_platform.h"
|
|
|
|
/* Peri Configuration register for mt2712 */
|
|
#define PERI_ETH_PHY_INTF_SEL 0x418
|
|
#define PHY_INTF_MII 0
|
|
#define PHY_INTF_RGMII 1
|
|
#define PHY_INTF_RMII 4
|
|
#define RMII_CLK_SRC_RXC BIT(4)
|
|
#define RMII_CLK_SRC_INTERNAL BIT(5)
|
|
|
|
#define PERI_ETH_DLY 0x428
|
|
#define ETH_DLY_GTXC_INV BIT(6)
|
|
#define ETH_DLY_GTXC_ENABLE BIT(5)
|
|
#define ETH_DLY_GTXC_STAGES GENMASK(4, 0)
|
|
#define ETH_DLY_TXC_INV BIT(20)
|
|
#define ETH_DLY_TXC_ENABLE BIT(19)
|
|
#define ETH_DLY_TXC_STAGES GENMASK(18, 14)
|
|
#define ETH_DLY_RXC_INV BIT(13)
|
|
#define ETH_DLY_RXC_ENABLE BIT(12)
|
|
#define ETH_DLY_RXC_STAGES GENMASK(11, 7)
|
|
|
|
#define PERI_ETH_DLY_FINE 0x800
|
|
#define ETH_RMII_DLY_TX_INV BIT(2)
|
|
#define ETH_FINE_DLY_GTXC BIT(1)
|
|
#define ETH_FINE_DLY_RXC BIT(0)
|
|
|
|
/* Peri Configuration register for mt8195 */
|
|
#define MT8195_PERI_ETH_CTRL0 0xFD0
|
|
#define MT8195_RMII_CLK_SRC_INTERNAL BIT(28)
|
|
#define MT8195_RMII_CLK_SRC_RXC BIT(27)
|
|
#define MT8195_ETH_INTF_SEL GENMASK(26, 24)
|
|
#define MT8195_RGMII_TXC_PHASE_CTRL BIT(22)
|
|
#define MT8195_EXT_PHY_MODE BIT(21)
|
|
#define MT8195_DLY_GTXC_INV BIT(12)
|
|
#define MT8195_DLY_GTXC_ENABLE BIT(5)
|
|
#define MT8195_DLY_GTXC_STAGES GENMASK(4, 0)
|
|
|
|
#define MT8195_PERI_ETH_CTRL1 0xFD4
|
|
#define MT8195_DLY_RXC_INV BIT(25)
|
|
#define MT8195_DLY_RXC_ENABLE BIT(18)
|
|
#define MT8195_DLY_RXC_STAGES GENMASK(17, 13)
|
|
#define MT8195_DLY_TXC_INV BIT(12)
|
|
#define MT8195_DLY_TXC_ENABLE BIT(5)
|
|
#define MT8195_DLY_TXC_STAGES GENMASK(4, 0)
|
|
|
|
#define MT8195_PERI_ETH_CTRL2 0xFD8
|
|
#define MT8195_DLY_RMII_RXC_INV BIT(25)
|
|
#define MT8195_DLY_RMII_RXC_ENABLE BIT(18)
|
|
#define MT8195_DLY_RMII_RXC_STAGES GENMASK(17, 13)
|
|
#define MT8195_DLY_RMII_TXC_INV BIT(12)
|
|
#define MT8195_DLY_RMII_TXC_ENABLE BIT(5)
|
|
#define MT8195_DLY_RMII_TXC_STAGES GENMASK(4, 0)
|
|
|
|
struct mac_delay_struct {
|
|
u32 tx_delay;
|
|
u32 rx_delay;
|
|
bool tx_inv;
|
|
bool rx_inv;
|
|
};
|
|
|
|
struct mediatek_dwmac_plat_data {
|
|
const struct mediatek_dwmac_variant *variant;
|
|
struct mac_delay_struct mac_delay;
|
|
struct clk *rmii_internal_clk;
|
|
struct clk_bulk_data *clks;
|
|
struct regmap *peri_regmap;
|
|
struct device_node *np;
|
|
struct device *dev;
|
|
phy_interface_t phy_mode;
|
|
bool rmii_clk_from_mac;
|
|
bool rmii_rxc;
|
|
bool mac_wol;
|
|
};
|
|
|
|
struct mediatek_dwmac_variant {
|
|
int (*dwmac_set_phy_interface)(struct mediatek_dwmac_plat_data *plat);
|
|
int (*dwmac_set_delay)(struct mediatek_dwmac_plat_data *plat);
|
|
void (*dwmac_fix_mac_speed)(void *priv, unsigned int speed);
|
|
|
|
/* clock ids to be requested */
|
|
const char * const *clk_list;
|
|
int num_clks;
|
|
|
|
u32 dma_bit_mask;
|
|
u32 rx_delay_max;
|
|
u32 tx_delay_max;
|
|
};
|
|
|
|
/* list of clocks required for mac */
|
|
static const char * const mt2712_dwmac_clk_l[] = {
|
|
"axi", "apb", "mac_main", "ptp_ref"
|
|
};
|
|
|
|
static const char * const mt8195_dwmac_clk_l[] = {
|
|
"axi", "apb", "mac_cg", "mac_main", "ptp_ref"
|
|
};
|
|
|
|
static int mt2712_set_interface(struct mediatek_dwmac_plat_data *plat)
|
|
{
|
|
int rmii_clk_from_mac = plat->rmii_clk_from_mac ? RMII_CLK_SRC_INTERNAL : 0;
|
|
int rmii_rxc = plat->rmii_rxc ? RMII_CLK_SRC_RXC : 0;
|
|
u32 intf_val = 0;
|
|
|
|
/* select phy interface in top control domain */
|
|
switch (plat->phy_mode) {
|
|
case PHY_INTERFACE_MODE_MII:
|
|
intf_val |= PHY_INTF_MII;
|
|
break;
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
intf_val |= (PHY_INTF_RMII | rmii_rxc | rmii_clk_from_mac);
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
intf_val |= PHY_INTF_RGMII;
|
|
break;
|
|
default:
|
|
dev_err(plat->dev, "phy interface not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
regmap_write(plat->peri_regmap, PERI_ETH_PHY_INTF_SEL, intf_val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mt2712_delay_ps2stage(struct mediatek_dwmac_plat_data *plat)
|
|
{
|
|
struct mac_delay_struct *mac_delay = &plat->mac_delay;
|
|
|
|
switch (plat->phy_mode) {
|
|
case PHY_INTERFACE_MODE_MII:
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
/* 550ps per stage for MII/RMII */
|
|
mac_delay->tx_delay /= 550;
|
|
mac_delay->rx_delay /= 550;
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
/* 170ps per stage for RGMII */
|
|
mac_delay->tx_delay /= 170;
|
|
mac_delay->rx_delay /= 170;
|
|
break;
|
|
default:
|
|
dev_err(plat->dev, "phy interface not supported\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void mt2712_delay_stage2ps(struct mediatek_dwmac_plat_data *plat)
|
|
{
|
|
struct mac_delay_struct *mac_delay = &plat->mac_delay;
|
|
|
|
switch (plat->phy_mode) {
|
|
case PHY_INTERFACE_MODE_MII:
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
/* 550ps per stage for MII/RMII */
|
|
mac_delay->tx_delay *= 550;
|
|
mac_delay->rx_delay *= 550;
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
/* 170ps per stage for RGMII */
|
|
mac_delay->tx_delay *= 170;
|
|
mac_delay->rx_delay *= 170;
|
|
break;
|
|
default:
|
|
dev_err(plat->dev, "phy interface not supported\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int mt2712_set_delay(struct mediatek_dwmac_plat_data *plat)
|
|
{
|
|
struct mac_delay_struct *mac_delay = &plat->mac_delay;
|
|
u32 delay_val = 0, fine_val = 0;
|
|
|
|
mt2712_delay_ps2stage(plat);
|
|
|
|
switch (plat->phy_mode) {
|
|
case PHY_INTERFACE_MODE_MII:
|
|
delay_val |= FIELD_PREP(ETH_DLY_TXC_ENABLE, !!mac_delay->tx_delay);
|
|
delay_val |= FIELD_PREP(ETH_DLY_TXC_STAGES, mac_delay->tx_delay);
|
|
delay_val |= FIELD_PREP(ETH_DLY_TXC_INV, mac_delay->tx_inv);
|
|
|
|
delay_val |= FIELD_PREP(ETH_DLY_RXC_ENABLE, !!mac_delay->rx_delay);
|
|
delay_val |= FIELD_PREP(ETH_DLY_RXC_STAGES, mac_delay->rx_delay);
|
|
delay_val |= FIELD_PREP(ETH_DLY_RXC_INV, mac_delay->rx_inv);
|
|
break;
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
if (plat->rmii_clk_from_mac) {
|
|
/* case 1: mac provides the rmii reference clock,
|
|
* and the clock output to TXC pin.
|
|
* The egress timing can be adjusted by GTXC delay macro circuit.
|
|
* The ingress timing can be adjusted by TXC delay macro circuit.
|
|
*/
|
|
delay_val |= FIELD_PREP(ETH_DLY_TXC_ENABLE, !!mac_delay->rx_delay);
|
|
delay_val |= FIELD_PREP(ETH_DLY_TXC_STAGES, mac_delay->rx_delay);
|
|
delay_val |= FIELD_PREP(ETH_DLY_TXC_INV, mac_delay->rx_inv);
|
|
|
|
delay_val |= FIELD_PREP(ETH_DLY_GTXC_ENABLE, !!mac_delay->tx_delay);
|
|
delay_val |= FIELD_PREP(ETH_DLY_GTXC_STAGES, mac_delay->tx_delay);
|
|
delay_val |= FIELD_PREP(ETH_DLY_GTXC_INV, mac_delay->tx_inv);
|
|
} else {
|
|
/* case 2: the rmii reference clock is from external phy,
|
|
* and the property "rmii_rxc" indicates which pin(TXC/RXC)
|
|
* the reference clk is connected to. The reference clock is a
|
|
* received signal, so rx_delay/rx_inv are used to indicate
|
|
* the reference clock timing adjustment
|
|
*/
|
|
if (plat->rmii_rxc) {
|
|
/* the rmii reference clock from outside is connected
|
|
* to RXC pin, the reference clock will be adjusted
|
|
* by RXC delay macro circuit.
|
|
*/
|
|
delay_val |= FIELD_PREP(ETH_DLY_RXC_ENABLE, !!mac_delay->rx_delay);
|
|
delay_val |= FIELD_PREP(ETH_DLY_RXC_STAGES, mac_delay->rx_delay);
|
|
delay_val |= FIELD_PREP(ETH_DLY_RXC_INV, mac_delay->rx_inv);
|
|
} else {
|
|
/* the rmii reference clock from outside is connected
|
|
* to TXC pin, the reference clock will be adjusted
|
|
* by TXC delay macro circuit.
|
|
*/
|
|
delay_val |= FIELD_PREP(ETH_DLY_TXC_ENABLE, !!mac_delay->rx_delay);
|
|
delay_val |= FIELD_PREP(ETH_DLY_TXC_STAGES, mac_delay->rx_delay);
|
|
delay_val |= FIELD_PREP(ETH_DLY_TXC_INV, mac_delay->rx_inv);
|
|
}
|
|
/* tx_inv will inverse the tx clock inside mac relateive to
|
|
* reference clock from external phy,
|
|
* and this bit is located in the same register with fine-tune
|
|
*/
|
|
if (mac_delay->tx_inv)
|
|
fine_val = ETH_RMII_DLY_TX_INV;
|
|
}
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
fine_val = ETH_FINE_DLY_GTXC | ETH_FINE_DLY_RXC;
|
|
|
|
delay_val |= FIELD_PREP(ETH_DLY_GTXC_ENABLE, !!mac_delay->tx_delay);
|
|
delay_val |= FIELD_PREP(ETH_DLY_GTXC_STAGES, mac_delay->tx_delay);
|
|
delay_val |= FIELD_PREP(ETH_DLY_GTXC_INV, mac_delay->tx_inv);
|
|
|
|
delay_val |= FIELD_PREP(ETH_DLY_RXC_ENABLE, !!mac_delay->rx_delay);
|
|
delay_val |= FIELD_PREP(ETH_DLY_RXC_STAGES, mac_delay->rx_delay);
|
|
delay_val |= FIELD_PREP(ETH_DLY_RXC_INV, mac_delay->rx_inv);
|
|
break;
|
|
default:
|
|
dev_err(plat->dev, "phy interface not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
regmap_write(plat->peri_regmap, PERI_ETH_DLY, delay_val);
|
|
regmap_write(plat->peri_regmap, PERI_ETH_DLY_FINE, fine_val);
|
|
|
|
mt2712_delay_stage2ps(plat);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct mediatek_dwmac_variant mt2712_gmac_variant = {
|
|
.dwmac_set_phy_interface = mt2712_set_interface,
|
|
.dwmac_set_delay = mt2712_set_delay,
|
|
.clk_list = mt2712_dwmac_clk_l,
|
|
.num_clks = ARRAY_SIZE(mt2712_dwmac_clk_l),
|
|
.dma_bit_mask = 33,
|
|
.rx_delay_max = 17600,
|
|
.tx_delay_max = 17600,
|
|
};
|
|
|
|
static int mt8195_set_interface(struct mediatek_dwmac_plat_data *plat)
|
|
{
|
|
int rmii_clk_from_mac = plat->rmii_clk_from_mac ? MT8195_RMII_CLK_SRC_INTERNAL : 0;
|
|
int rmii_rxc = plat->rmii_rxc ? MT8195_RMII_CLK_SRC_RXC : 0;
|
|
u32 intf_val = 0;
|
|
|
|
/* select phy interface in top control domain */
|
|
switch (plat->phy_mode) {
|
|
case PHY_INTERFACE_MODE_MII:
|
|
intf_val |= FIELD_PREP(MT8195_ETH_INTF_SEL, PHY_INTF_MII);
|
|
break;
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
intf_val |= (rmii_rxc | rmii_clk_from_mac);
|
|
intf_val |= FIELD_PREP(MT8195_ETH_INTF_SEL, PHY_INTF_RMII);
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
intf_val |= FIELD_PREP(MT8195_ETH_INTF_SEL, PHY_INTF_RGMII);
|
|
break;
|
|
default:
|
|
dev_err(plat->dev, "phy interface not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* MT8195 only support external PHY */
|
|
intf_val |= MT8195_EXT_PHY_MODE;
|
|
|
|
regmap_write(plat->peri_regmap, MT8195_PERI_ETH_CTRL0, intf_val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mt8195_delay_ps2stage(struct mediatek_dwmac_plat_data *plat)
|
|
{
|
|
struct mac_delay_struct *mac_delay = &plat->mac_delay;
|
|
|
|
/* 290ps per stage */
|
|
mac_delay->tx_delay /= 290;
|
|
mac_delay->rx_delay /= 290;
|
|
}
|
|
|
|
static void mt8195_delay_stage2ps(struct mediatek_dwmac_plat_data *plat)
|
|
{
|
|
struct mac_delay_struct *mac_delay = &plat->mac_delay;
|
|
|
|
/* 290ps per stage */
|
|
mac_delay->tx_delay *= 290;
|
|
mac_delay->rx_delay *= 290;
|
|
}
|
|
|
|
static int mt8195_set_delay(struct mediatek_dwmac_plat_data *plat)
|
|
{
|
|
struct mac_delay_struct *mac_delay = &plat->mac_delay;
|
|
u32 gtxc_delay_val = 0, delay_val = 0, rmii_delay_val = 0;
|
|
|
|
mt8195_delay_ps2stage(plat);
|
|
|
|
switch (plat->phy_mode) {
|
|
case PHY_INTERFACE_MODE_MII:
|
|
delay_val |= FIELD_PREP(MT8195_DLY_TXC_ENABLE, !!mac_delay->tx_delay);
|
|
delay_val |= FIELD_PREP(MT8195_DLY_TXC_STAGES, mac_delay->tx_delay);
|
|
delay_val |= FIELD_PREP(MT8195_DLY_TXC_INV, mac_delay->tx_inv);
|
|
|
|
delay_val |= FIELD_PREP(MT8195_DLY_RXC_ENABLE, !!mac_delay->rx_delay);
|
|
delay_val |= FIELD_PREP(MT8195_DLY_RXC_STAGES, mac_delay->rx_delay);
|
|
delay_val |= FIELD_PREP(MT8195_DLY_RXC_INV, mac_delay->rx_inv);
|
|
break;
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
if (plat->rmii_clk_from_mac) {
|
|
/* case 1: mac provides the rmii reference clock,
|
|
* and the clock output to TXC pin.
|
|
* The egress timing can be adjusted by RMII_TXC delay macro circuit.
|
|
* The ingress timing can be adjusted by RMII_RXC delay macro circuit.
|
|
*/
|
|
rmii_delay_val |= FIELD_PREP(MT8195_DLY_RMII_TXC_ENABLE,
|
|
!!mac_delay->tx_delay);
|
|
rmii_delay_val |= FIELD_PREP(MT8195_DLY_RMII_TXC_STAGES,
|
|
mac_delay->tx_delay);
|
|
rmii_delay_val |= FIELD_PREP(MT8195_DLY_RMII_TXC_INV,
|
|
mac_delay->tx_inv);
|
|
|
|
rmii_delay_val |= FIELD_PREP(MT8195_DLY_RMII_RXC_ENABLE,
|
|
!!mac_delay->rx_delay);
|
|
rmii_delay_val |= FIELD_PREP(MT8195_DLY_RMII_RXC_STAGES,
|
|
mac_delay->rx_delay);
|
|
rmii_delay_val |= FIELD_PREP(MT8195_DLY_RMII_RXC_INV,
|
|
mac_delay->rx_inv);
|
|
} else {
|
|
/* case 2: the rmii reference clock is from external phy,
|
|
* and the property "rmii_rxc" indicates which pin(TXC/RXC)
|
|
* the reference clk is connected to. The reference clock is a
|
|
* received signal, so rx_delay/rx_inv are used to indicate
|
|
* the reference clock timing adjustment
|
|
*/
|
|
if (plat->rmii_rxc) {
|
|
/* the rmii reference clock from outside is connected
|
|
* to RXC pin, the reference clock will be adjusted
|
|
* by RXC delay macro circuit.
|
|
*/
|
|
delay_val |= FIELD_PREP(MT8195_DLY_RXC_ENABLE,
|
|
!!mac_delay->rx_delay);
|
|
delay_val |= FIELD_PREP(MT8195_DLY_RXC_STAGES,
|
|
mac_delay->rx_delay);
|
|
delay_val |= FIELD_PREP(MT8195_DLY_RXC_INV,
|
|
mac_delay->rx_inv);
|
|
} else {
|
|
/* the rmii reference clock from outside is connected
|
|
* to TXC pin, the reference clock will be adjusted
|
|
* by TXC delay macro circuit.
|
|
*/
|
|
delay_val |= FIELD_PREP(MT8195_DLY_TXC_ENABLE,
|
|
!!mac_delay->rx_delay);
|
|
delay_val |= FIELD_PREP(MT8195_DLY_TXC_STAGES,
|
|
mac_delay->rx_delay);
|
|
delay_val |= FIELD_PREP(MT8195_DLY_TXC_INV,
|
|
mac_delay->rx_inv);
|
|
}
|
|
}
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
gtxc_delay_val |= FIELD_PREP(MT8195_DLY_GTXC_ENABLE, !!mac_delay->tx_delay);
|
|
gtxc_delay_val |= FIELD_PREP(MT8195_DLY_GTXC_STAGES, mac_delay->tx_delay);
|
|
gtxc_delay_val |= FIELD_PREP(MT8195_DLY_GTXC_INV, mac_delay->tx_inv);
|
|
|
|
delay_val |= FIELD_PREP(MT8195_DLY_RXC_ENABLE, !!mac_delay->rx_delay);
|
|
delay_val |= FIELD_PREP(MT8195_DLY_RXC_STAGES, mac_delay->rx_delay);
|
|
delay_val |= FIELD_PREP(MT8195_DLY_RXC_INV, mac_delay->rx_inv);
|
|
|
|
break;
|
|
default:
|
|
dev_err(plat->dev, "phy interface not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
regmap_update_bits(plat->peri_regmap,
|
|
MT8195_PERI_ETH_CTRL0,
|
|
MT8195_RGMII_TXC_PHASE_CTRL |
|
|
MT8195_DLY_GTXC_INV |
|
|
MT8195_DLY_GTXC_ENABLE |
|
|
MT8195_DLY_GTXC_STAGES,
|
|
gtxc_delay_val);
|
|
regmap_write(plat->peri_regmap, MT8195_PERI_ETH_CTRL1, delay_val);
|
|
regmap_write(plat->peri_regmap, MT8195_PERI_ETH_CTRL2, rmii_delay_val);
|
|
|
|
mt8195_delay_stage2ps(plat);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mt8195_fix_mac_speed(void *priv, unsigned int speed)
|
|
{
|
|
struct mediatek_dwmac_plat_data *priv_plat = priv;
|
|
|
|
if ((phy_interface_mode_is_rgmii(priv_plat->phy_mode))) {
|
|
/* prefer 2ns fixed delay which is controlled by TXC_PHASE_CTRL,
|
|
* when link speed is 1Gbps with RGMII interface,
|
|
* Fall back to delay macro circuit for 10/100Mbps link speed.
|
|
*/
|
|
if (speed == SPEED_1000)
|
|
regmap_update_bits(priv_plat->peri_regmap,
|
|
MT8195_PERI_ETH_CTRL0,
|
|
MT8195_RGMII_TXC_PHASE_CTRL |
|
|
MT8195_DLY_GTXC_ENABLE |
|
|
MT8195_DLY_GTXC_INV |
|
|
MT8195_DLY_GTXC_STAGES,
|
|
MT8195_RGMII_TXC_PHASE_CTRL);
|
|
else
|
|
mt8195_set_delay(priv_plat);
|
|
}
|
|
}
|
|
|
|
static const struct mediatek_dwmac_variant mt8195_gmac_variant = {
|
|
.dwmac_set_phy_interface = mt8195_set_interface,
|
|
.dwmac_set_delay = mt8195_set_delay,
|
|
.dwmac_fix_mac_speed = mt8195_fix_mac_speed,
|
|
.clk_list = mt8195_dwmac_clk_l,
|
|
.num_clks = ARRAY_SIZE(mt8195_dwmac_clk_l),
|
|
.dma_bit_mask = 35,
|
|
.rx_delay_max = 9280,
|
|
.tx_delay_max = 9280,
|
|
};
|
|
|
|
static int mediatek_dwmac_config_dt(struct mediatek_dwmac_plat_data *plat)
|
|
{
|
|
struct mac_delay_struct *mac_delay = &plat->mac_delay;
|
|
u32 tx_delay_ps, rx_delay_ps;
|
|
int err;
|
|
|
|
plat->peri_regmap = syscon_regmap_lookup_by_phandle(plat->np, "mediatek,pericfg");
|
|
if (IS_ERR(plat->peri_regmap)) {
|
|
dev_err(plat->dev, "Failed to get pericfg syscon\n");
|
|
return PTR_ERR(plat->peri_regmap);
|
|
}
|
|
|
|
err = of_get_phy_mode(plat->np, &plat->phy_mode);
|
|
if (err) {
|
|
dev_err(plat->dev, "not find phy-mode\n");
|
|
return err;
|
|
}
|
|
|
|
if (!of_property_read_u32(plat->np, "mediatek,tx-delay-ps", &tx_delay_ps)) {
|
|
if (tx_delay_ps < plat->variant->tx_delay_max) {
|
|
mac_delay->tx_delay = tx_delay_ps;
|
|
} else {
|
|
dev_err(plat->dev, "Invalid TX clock delay: %dps\n", tx_delay_ps);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (!of_property_read_u32(plat->np, "mediatek,rx-delay-ps", &rx_delay_ps)) {
|
|
if (rx_delay_ps < plat->variant->rx_delay_max) {
|
|
mac_delay->rx_delay = rx_delay_ps;
|
|
} else {
|
|
dev_err(plat->dev, "Invalid RX clock delay: %dps\n", rx_delay_ps);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
mac_delay->tx_inv = of_property_read_bool(plat->np, "mediatek,txc-inverse");
|
|
mac_delay->rx_inv = of_property_read_bool(plat->np, "mediatek,rxc-inverse");
|
|
plat->rmii_rxc = of_property_read_bool(plat->np, "mediatek,rmii-rxc");
|
|
plat->rmii_clk_from_mac = of_property_read_bool(plat->np, "mediatek,rmii-clk-from-mac");
|
|
plat->mac_wol = of_property_read_bool(plat->np, "mediatek,mac-wol");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mediatek_dwmac_clk_init(struct mediatek_dwmac_plat_data *plat)
|
|
{
|
|
const struct mediatek_dwmac_variant *variant = plat->variant;
|
|
int i, ret;
|
|
|
|
plat->clks = devm_kcalloc(plat->dev, variant->num_clks, sizeof(*plat->clks), GFP_KERNEL);
|
|
if (!plat->clks)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < variant->num_clks; i++)
|
|
plat->clks[i].id = variant->clk_list[i];
|
|
|
|
ret = devm_clk_bulk_get(plat->dev, variant->num_clks, plat->clks);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* The clock labeled as "rmii_internal" is needed only in RMII(when
|
|
* MAC provides the reference clock), and useless for RGMII/MII or
|
|
* RMII(when PHY provides the reference clock).
|
|
* So, "rmii_internal" clock is got and configured only when
|
|
* reference clock of RMII is from MAC.
|
|
*/
|
|
if (plat->rmii_clk_from_mac) {
|
|
plat->rmii_internal_clk = devm_clk_get(plat->dev, "rmii_internal");
|
|
if (IS_ERR(plat->rmii_internal_clk))
|
|
ret = PTR_ERR(plat->rmii_internal_clk);
|
|
} else {
|
|
plat->rmii_internal_clk = NULL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mediatek_dwmac_init(struct platform_device *pdev, void *priv)
|
|
{
|
|
struct mediatek_dwmac_plat_data *plat = priv;
|
|
const struct mediatek_dwmac_variant *variant = plat->variant;
|
|
int ret;
|
|
|
|
if (variant->dwmac_set_phy_interface) {
|
|
ret = variant->dwmac_set_phy_interface(plat);
|
|
if (ret) {
|
|
dev_err(plat->dev, "failed to set phy interface, err = %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (variant->dwmac_set_delay) {
|
|
ret = variant->dwmac_set_delay(plat);
|
|
if (ret) {
|
|
dev_err(plat->dev, "failed to set delay value, err = %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = clk_bulk_prepare_enable(variant->num_clks, plat->clks);
|
|
if (ret) {
|
|
dev_err(plat->dev, "failed to enable clks, err = %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(plat->rmii_internal_clk);
|
|
if (ret) {
|
|
dev_err(plat->dev, "failed to enable rmii internal clk, err = %d\n", ret);
|
|
goto err_clk;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_clk:
|
|
clk_bulk_disable_unprepare(variant->num_clks, plat->clks);
|
|
return ret;
|
|
}
|
|
|
|
static void mediatek_dwmac_exit(struct platform_device *pdev, void *priv)
|
|
{
|
|
struct mediatek_dwmac_plat_data *plat = priv;
|
|
const struct mediatek_dwmac_variant *variant = plat->variant;
|
|
|
|
clk_disable_unprepare(plat->rmii_internal_clk);
|
|
clk_bulk_disable_unprepare(variant->num_clks, plat->clks);
|
|
}
|
|
|
|
static int mediatek_dwmac_clks_config(void *priv, bool enabled)
|
|
{
|
|
struct mediatek_dwmac_plat_data *plat = priv;
|
|
const struct mediatek_dwmac_variant *variant = plat->variant;
|
|
int ret = 0;
|
|
|
|
if (enabled) {
|
|
ret = clk_bulk_prepare_enable(variant->num_clks, plat->clks);
|
|
if (ret) {
|
|
dev_err(plat->dev, "failed to enable clks, err = %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(plat->rmii_internal_clk);
|
|
if (ret) {
|
|
dev_err(plat->dev, "failed to enable rmii internal clk, err = %d\n", ret);
|
|
return ret;
|
|
}
|
|
} else {
|
|
clk_disable_unprepare(plat->rmii_internal_clk);
|
|
clk_bulk_disable_unprepare(variant->num_clks, plat->clks);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mediatek_dwmac_common_data(struct platform_device *pdev,
|
|
struct plat_stmmacenet_data *plat,
|
|
struct mediatek_dwmac_plat_data *priv_plat)
|
|
{
|
|
int i;
|
|
|
|
plat->interface = priv_plat->phy_mode;
|
|
plat->use_phy_wol = priv_plat->mac_wol ? 0 : 1;
|
|
plat->riwt_off = 1;
|
|
plat->maxmtu = ETH_DATA_LEN;
|
|
plat->addr64 = priv_plat->variant->dma_bit_mask;
|
|
plat->bsp_priv = priv_plat;
|
|
plat->init = mediatek_dwmac_init;
|
|
plat->exit = mediatek_dwmac_exit;
|
|
plat->clks_config = mediatek_dwmac_clks_config;
|
|
if (priv_plat->variant->dwmac_fix_mac_speed)
|
|
plat->fix_mac_speed = priv_plat->variant->dwmac_fix_mac_speed;
|
|
|
|
plat->safety_feat_cfg = devm_kzalloc(&pdev->dev,
|
|
sizeof(*plat->safety_feat_cfg),
|
|
GFP_KERNEL);
|
|
if (!plat->safety_feat_cfg)
|
|
return -ENOMEM;
|
|
|
|
plat->safety_feat_cfg->tsoee = 1;
|
|
plat->safety_feat_cfg->mrxpee = 0;
|
|
plat->safety_feat_cfg->mestee = 1;
|
|
plat->safety_feat_cfg->mrxee = 1;
|
|
plat->safety_feat_cfg->mtxee = 1;
|
|
plat->safety_feat_cfg->epsi = 0;
|
|
plat->safety_feat_cfg->edpp = 1;
|
|
plat->safety_feat_cfg->prtyen = 1;
|
|
plat->safety_feat_cfg->tmouten = 1;
|
|
|
|
for (i = 0; i < plat->tx_queues_to_use; i++) {
|
|
/* Default TX Q0 to use TSO and rest TXQ for TBS */
|
|
if (i > 0)
|
|
plat->tx_queues_cfg[i].tbs_en = 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mediatek_dwmac_probe(struct platform_device *pdev)
|
|
{
|
|
struct mediatek_dwmac_plat_data *priv_plat;
|
|
struct plat_stmmacenet_data *plat_dat;
|
|
struct stmmac_resources stmmac_res;
|
|
int ret;
|
|
|
|
priv_plat = devm_kzalloc(&pdev->dev, sizeof(*priv_plat), GFP_KERNEL);
|
|
if (!priv_plat)
|
|
return -ENOMEM;
|
|
|
|
priv_plat->variant = of_device_get_match_data(&pdev->dev);
|
|
if (!priv_plat->variant) {
|
|
dev_err(&pdev->dev, "Missing dwmac-mediatek variant\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv_plat->dev = &pdev->dev;
|
|
priv_plat->np = pdev->dev.of_node;
|
|
|
|
ret = mediatek_dwmac_config_dt(priv_plat);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = mediatek_dwmac_clk_init(priv_plat);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = stmmac_get_platform_resources(pdev, &stmmac_res);
|
|
if (ret)
|
|
return ret;
|
|
|
|
plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
|
|
if (IS_ERR(plat_dat))
|
|
return PTR_ERR(plat_dat);
|
|
|
|
mediatek_dwmac_common_data(pdev, plat_dat, priv_plat);
|
|
mediatek_dwmac_init(pdev, priv_plat);
|
|
|
|
ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
|
|
if (ret) {
|
|
stmmac_remove_config_dt(pdev, plat_dat);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id mediatek_dwmac_match[] = {
|
|
{ .compatible = "mediatek,mt2712-gmac",
|
|
.data = &mt2712_gmac_variant },
|
|
{ .compatible = "mediatek,mt8195-gmac",
|
|
.data = &mt8195_gmac_variant },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, mediatek_dwmac_match);
|
|
|
|
static struct platform_driver mediatek_dwmac_driver = {
|
|
.probe = mediatek_dwmac_probe,
|
|
.remove = stmmac_pltfr_remove,
|
|
.driver = {
|
|
.name = "dwmac-mediatek",
|
|
.pm = &stmmac_pltfr_pm_ops,
|
|
.of_match_table = mediatek_dwmac_match,
|
|
},
|
|
};
|
|
module_platform_driver(mediatek_dwmac_driver);
|
|
|
|
MODULE_AUTHOR("Biao Huang <biao.huang@mediatek.com>");
|
|
MODULE_DESCRIPTION("MediaTek DWMAC specific glue layer");
|
|
MODULE_LICENSE("GPL v2");
|