1675 lines
42 KiB
C
1675 lines
42 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/***************************************************************************
|
|
*
|
|
* Copyright (C) 2007,2008 SMSC
|
|
*
|
|
***************************************************************************
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <asm/unaligned.h>
|
|
#include "smsc9420.h"
|
|
|
|
#define DRV_NAME "smsc9420"
|
|
#define DRV_MDIONAME "smsc9420-mdio"
|
|
#define DRV_DESCRIPTION "SMSC LAN9420 driver"
|
|
#define DRV_VERSION "1.01"
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
struct smsc9420_dma_desc {
|
|
u32 status;
|
|
u32 length;
|
|
u32 buffer1;
|
|
u32 buffer2;
|
|
};
|
|
|
|
struct smsc9420_ring_info {
|
|
struct sk_buff *skb;
|
|
dma_addr_t mapping;
|
|
};
|
|
|
|
struct smsc9420_pdata {
|
|
void __iomem *ioaddr;
|
|
struct pci_dev *pdev;
|
|
struct net_device *dev;
|
|
|
|
struct smsc9420_dma_desc *rx_ring;
|
|
struct smsc9420_dma_desc *tx_ring;
|
|
struct smsc9420_ring_info *tx_buffers;
|
|
struct smsc9420_ring_info *rx_buffers;
|
|
dma_addr_t rx_dma_addr;
|
|
dma_addr_t tx_dma_addr;
|
|
int tx_ring_head, tx_ring_tail;
|
|
int rx_ring_head, rx_ring_tail;
|
|
|
|
spinlock_t int_lock;
|
|
spinlock_t phy_lock;
|
|
|
|
struct napi_struct napi;
|
|
|
|
bool software_irq_signal;
|
|
bool rx_csum;
|
|
u32 msg_enable;
|
|
|
|
struct mii_bus *mii_bus;
|
|
int last_duplex;
|
|
int last_carrier;
|
|
};
|
|
|
|
static const struct pci_device_id smsc9420_id_table[] = {
|
|
{ PCI_VENDOR_ID_9420, PCI_DEVICE_ID_9420, PCI_ANY_ID, PCI_ANY_ID, },
|
|
{ 0, }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, smsc9420_id_table);
|
|
|
|
#define SMSC_MSG_DEFAULT (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)
|
|
|
|
static uint smsc_debug;
|
|
static uint debug = -1;
|
|
module_param(debug, uint, 0);
|
|
MODULE_PARM_DESC(debug, "debug level");
|
|
|
|
static inline u32 smsc9420_reg_read(struct smsc9420_pdata *pd, u32 offset)
|
|
{
|
|
return ioread32(pd->ioaddr + offset);
|
|
}
|
|
|
|
static inline void
|
|
smsc9420_reg_write(struct smsc9420_pdata *pd, u32 offset, u32 value)
|
|
{
|
|
iowrite32(value, pd->ioaddr + offset);
|
|
}
|
|
|
|
static inline void smsc9420_pci_flush_write(struct smsc9420_pdata *pd)
|
|
{
|
|
/* to ensure PCI write completion, we must perform a PCI read */
|
|
smsc9420_reg_read(pd, ID_REV);
|
|
}
|
|
|
|
static int smsc9420_mii_read(struct mii_bus *bus, int phyaddr, int regidx)
|
|
{
|
|
struct smsc9420_pdata *pd = (struct smsc9420_pdata *)bus->priv;
|
|
unsigned long flags;
|
|
u32 addr;
|
|
int i, reg = -EIO;
|
|
|
|
spin_lock_irqsave(&pd->phy_lock, flags);
|
|
|
|
/* confirm MII not busy */
|
|
if ((smsc9420_reg_read(pd, MII_ACCESS) & MII_ACCESS_MII_BUSY_)) {
|
|
netif_warn(pd, drv, pd->dev, "MII is busy???\n");
|
|
goto out;
|
|
}
|
|
|
|
/* set the address, index & direction (read from PHY) */
|
|
addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6) |
|
|
MII_ACCESS_MII_READ_;
|
|
smsc9420_reg_write(pd, MII_ACCESS, addr);
|
|
|
|
/* wait for read to complete with 50us timeout */
|
|
for (i = 0; i < 5; i++) {
|
|
if (!(smsc9420_reg_read(pd, MII_ACCESS) &
|
|
MII_ACCESS_MII_BUSY_)) {
|
|
reg = (u16)smsc9420_reg_read(pd, MII_DATA);
|
|
goto out;
|
|
}
|
|
udelay(10);
|
|
}
|
|
|
|
netif_warn(pd, drv, pd->dev, "MII busy timeout!\n");
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&pd->phy_lock, flags);
|
|
return reg;
|
|
}
|
|
|
|
static int smsc9420_mii_write(struct mii_bus *bus, int phyaddr, int regidx,
|
|
u16 val)
|
|
{
|
|
struct smsc9420_pdata *pd = (struct smsc9420_pdata *)bus->priv;
|
|
unsigned long flags;
|
|
u32 addr;
|
|
int i, reg = -EIO;
|
|
|
|
spin_lock_irqsave(&pd->phy_lock, flags);
|
|
|
|
/* confirm MII not busy */
|
|
if ((smsc9420_reg_read(pd, MII_ACCESS) & MII_ACCESS_MII_BUSY_)) {
|
|
netif_warn(pd, drv, pd->dev, "MII is busy???\n");
|
|
goto out;
|
|
}
|
|
|
|
/* put the data to write in the MAC */
|
|
smsc9420_reg_write(pd, MII_DATA, (u32)val);
|
|
|
|
/* set the address, index & direction (write to PHY) */
|
|
addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6) |
|
|
MII_ACCESS_MII_WRITE_;
|
|
smsc9420_reg_write(pd, MII_ACCESS, addr);
|
|
|
|
/* wait for write to complete with 50us timeout */
|
|
for (i = 0; i < 5; i++) {
|
|
if (!(smsc9420_reg_read(pd, MII_ACCESS) &
|
|
MII_ACCESS_MII_BUSY_)) {
|
|
reg = 0;
|
|
goto out;
|
|
}
|
|
udelay(10);
|
|
}
|
|
|
|
netif_warn(pd, drv, pd->dev, "MII busy timeout!\n");
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&pd->phy_lock, flags);
|
|
return reg;
|
|
}
|
|
|
|
/* Returns hash bit number for given MAC address
|
|
* Example:
|
|
* 01 00 5E 00 00 01 -> returns bit number 31 */
|
|
static u32 smsc9420_hash(u8 addr[ETH_ALEN])
|
|
{
|
|
return (ether_crc(ETH_ALEN, addr) >> 26) & 0x3f;
|
|
}
|
|
|
|
static int smsc9420_eeprom_reload(struct smsc9420_pdata *pd)
|
|
{
|
|
int timeout = 100000;
|
|
|
|
BUG_ON(!pd);
|
|
|
|
if (smsc9420_reg_read(pd, E2P_CMD) & E2P_CMD_EPC_BUSY_) {
|
|
netif_dbg(pd, drv, pd->dev, "%s: Eeprom busy\n", __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
smsc9420_reg_write(pd, E2P_CMD,
|
|
(E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_RELOAD_));
|
|
|
|
do {
|
|
udelay(10);
|
|
if (!(smsc9420_reg_read(pd, E2P_CMD) & E2P_CMD_EPC_BUSY_))
|
|
return 0;
|
|
} while (timeout--);
|
|
|
|
netif_warn(pd, drv, pd->dev, "%s: Eeprom timed out\n", __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
static void smsc9420_ethtool_get_drvinfo(struct net_device *netdev,
|
|
struct ethtool_drvinfo *drvinfo)
|
|
{
|
|
struct smsc9420_pdata *pd = netdev_priv(netdev);
|
|
|
|
strlcpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver));
|
|
strlcpy(drvinfo->bus_info, pci_name(pd->pdev),
|
|
sizeof(drvinfo->bus_info));
|
|
strlcpy(drvinfo->version, DRV_VERSION, sizeof(drvinfo->version));
|
|
}
|
|
|
|
static u32 smsc9420_ethtool_get_msglevel(struct net_device *netdev)
|
|
{
|
|
struct smsc9420_pdata *pd = netdev_priv(netdev);
|
|
return pd->msg_enable;
|
|
}
|
|
|
|
static void smsc9420_ethtool_set_msglevel(struct net_device *netdev, u32 data)
|
|
{
|
|
struct smsc9420_pdata *pd = netdev_priv(netdev);
|
|
pd->msg_enable = data;
|
|
}
|
|
|
|
static int smsc9420_ethtool_getregslen(struct net_device *dev)
|
|
{
|
|
/* all smsc9420 registers plus all phy registers */
|
|
return 0x100 + (32 * sizeof(u32));
|
|
}
|
|
|
|
static void
|
|
smsc9420_ethtool_getregs(struct net_device *dev, struct ethtool_regs *regs,
|
|
void *buf)
|
|
{
|
|
struct smsc9420_pdata *pd = netdev_priv(dev);
|
|
struct phy_device *phy_dev = dev->phydev;
|
|
unsigned int i, j = 0;
|
|
u32 *data = buf;
|
|
|
|
regs->version = smsc9420_reg_read(pd, ID_REV);
|
|
for (i = 0; i < 0x100; i += (sizeof(u32)))
|
|
data[j++] = smsc9420_reg_read(pd, i);
|
|
|
|
// cannot read phy registers if the net device is down
|
|
if (!phy_dev)
|
|
return;
|
|
|
|
for (i = 0; i <= 31; i++)
|
|
data[j++] = smsc9420_mii_read(phy_dev->mdio.bus,
|
|
phy_dev->mdio.addr, i);
|
|
}
|
|
|
|
static void smsc9420_eeprom_enable_access(struct smsc9420_pdata *pd)
|
|
{
|
|
unsigned int temp = smsc9420_reg_read(pd, GPIO_CFG);
|
|
temp &= ~GPIO_CFG_EEPR_EN_;
|
|
smsc9420_reg_write(pd, GPIO_CFG, temp);
|
|
msleep(1);
|
|
}
|
|
|
|
static int smsc9420_eeprom_send_cmd(struct smsc9420_pdata *pd, u32 op)
|
|
{
|
|
int timeout = 100;
|
|
u32 e2cmd;
|
|
|
|
netif_dbg(pd, hw, pd->dev, "op 0x%08x\n", op);
|
|
if (smsc9420_reg_read(pd, E2P_CMD) & E2P_CMD_EPC_BUSY_) {
|
|
netif_warn(pd, hw, pd->dev, "Busy at start\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
e2cmd = op | E2P_CMD_EPC_BUSY_;
|
|
smsc9420_reg_write(pd, E2P_CMD, e2cmd);
|
|
|
|
do {
|
|
msleep(1);
|
|
e2cmd = smsc9420_reg_read(pd, E2P_CMD);
|
|
} while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout));
|
|
|
|
if (!timeout) {
|
|
netif_info(pd, hw, pd->dev, "TIMED OUT\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
if (e2cmd & E2P_CMD_EPC_TIMEOUT_) {
|
|
netif_info(pd, hw, pd->dev,
|
|
"Error occurred during eeprom operation\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int smsc9420_eeprom_read_location(struct smsc9420_pdata *pd,
|
|
u8 address, u8 *data)
|
|
{
|
|
u32 op = E2P_CMD_EPC_CMD_READ_ | address;
|
|
int ret;
|
|
|
|
netif_dbg(pd, hw, pd->dev, "address 0x%x\n", address);
|
|
ret = smsc9420_eeprom_send_cmd(pd, op);
|
|
|
|
if (!ret)
|
|
data[address] = smsc9420_reg_read(pd, E2P_DATA);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int smsc9420_eeprom_write_location(struct smsc9420_pdata *pd,
|
|
u8 address, u8 data)
|
|
{
|
|
u32 op = E2P_CMD_EPC_CMD_ERASE_ | address;
|
|
int ret;
|
|
|
|
netif_dbg(pd, hw, pd->dev, "address 0x%x, data 0x%x\n", address, data);
|
|
ret = smsc9420_eeprom_send_cmd(pd, op);
|
|
|
|
if (!ret) {
|
|
op = E2P_CMD_EPC_CMD_WRITE_ | address;
|
|
smsc9420_reg_write(pd, E2P_DATA, (u32)data);
|
|
ret = smsc9420_eeprom_send_cmd(pd, op);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int smsc9420_ethtool_get_eeprom_len(struct net_device *dev)
|
|
{
|
|
return SMSC9420_EEPROM_SIZE;
|
|
}
|
|
|
|
static int smsc9420_ethtool_get_eeprom(struct net_device *dev,
|
|
struct ethtool_eeprom *eeprom, u8 *data)
|
|
{
|
|
struct smsc9420_pdata *pd = netdev_priv(dev);
|
|
u8 eeprom_data[SMSC9420_EEPROM_SIZE];
|
|
int len, i;
|
|
|
|
smsc9420_eeprom_enable_access(pd);
|
|
|
|
len = min(eeprom->len, SMSC9420_EEPROM_SIZE);
|
|
for (i = 0; i < len; i++) {
|
|
int ret = smsc9420_eeprom_read_location(pd, i, eeprom_data);
|
|
if (ret < 0) {
|
|
eeprom->len = 0;
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
memcpy(data, &eeprom_data[eeprom->offset], len);
|
|
eeprom->magic = SMSC9420_EEPROM_MAGIC;
|
|
eeprom->len = len;
|
|
return 0;
|
|
}
|
|
|
|
static int smsc9420_ethtool_set_eeprom(struct net_device *dev,
|
|
struct ethtool_eeprom *eeprom, u8 *data)
|
|
{
|
|
struct smsc9420_pdata *pd = netdev_priv(dev);
|
|
int ret;
|
|
|
|
if (eeprom->magic != SMSC9420_EEPROM_MAGIC)
|
|
return -EINVAL;
|
|
|
|
smsc9420_eeprom_enable_access(pd);
|
|
smsc9420_eeprom_send_cmd(pd, E2P_CMD_EPC_CMD_EWEN_);
|
|
ret = smsc9420_eeprom_write_location(pd, eeprom->offset, *data);
|
|
smsc9420_eeprom_send_cmd(pd, E2P_CMD_EPC_CMD_EWDS_);
|
|
|
|
/* Single byte write, according to man page */
|
|
eeprom->len = 1;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct ethtool_ops smsc9420_ethtool_ops = {
|
|
.get_drvinfo = smsc9420_ethtool_get_drvinfo,
|
|
.get_msglevel = smsc9420_ethtool_get_msglevel,
|
|
.set_msglevel = smsc9420_ethtool_set_msglevel,
|
|
.nway_reset = phy_ethtool_nway_reset,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_eeprom_len = smsc9420_ethtool_get_eeprom_len,
|
|
.get_eeprom = smsc9420_ethtool_get_eeprom,
|
|
.set_eeprom = smsc9420_ethtool_set_eeprom,
|
|
.get_regs_len = smsc9420_ethtool_getregslen,
|
|
.get_regs = smsc9420_ethtool_getregs,
|
|
.get_ts_info = ethtool_op_get_ts_info,
|
|
.get_link_ksettings = phy_ethtool_get_link_ksettings,
|
|
.set_link_ksettings = phy_ethtool_set_link_ksettings,
|
|
};
|
|
|
|
/* Sets the device MAC address to dev_addr */
|
|
static void smsc9420_set_mac_address(struct net_device *dev)
|
|
{
|
|
struct smsc9420_pdata *pd = netdev_priv(dev);
|
|
const u8 *dev_addr = dev->dev_addr;
|
|
u32 mac_high16 = (dev_addr[5] << 8) | dev_addr[4];
|
|
u32 mac_low32 = (dev_addr[3] << 24) | (dev_addr[2] << 16) |
|
|
(dev_addr[1] << 8) | dev_addr[0];
|
|
|
|
smsc9420_reg_write(pd, ADDRH, mac_high16);
|
|
smsc9420_reg_write(pd, ADDRL, mac_low32);
|
|
}
|
|
|
|
static void smsc9420_check_mac_address(struct net_device *dev)
|
|
{
|
|
struct smsc9420_pdata *pd = netdev_priv(dev);
|
|
u8 addr[ETH_ALEN];
|
|
|
|
/* Check if mac address has been specified when bringing interface up */
|
|
if (is_valid_ether_addr(dev->dev_addr)) {
|
|
smsc9420_set_mac_address(dev);
|
|
netif_dbg(pd, probe, pd->dev,
|
|
"MAC Address is specified by configuration\n");
|
|
} else {
|
|
/* Try reading mac address from device. if EEPROM is present
|
|
* it will already have been set */
|
|
u32 mac_high16 = smsc9420_reg_read(pd, ADDRH);
|
|
u32 mac_low32 = smsc9420_reg_read(pd, ADDRL);
|
|
addr[0] = (u8)(mac_low32);
|
|
addr[1] = (u8)(mac_low32 >> 8);
|
|
addr[2] = (u8)(mac_low32 >> 16);
|
|
addr[3] = (u8)(mac_low32 >> 24);
|
|
addr[4] = (u8)(mac_high16);
|
|
addr[5] = (u8)(mac_high16 >> 8);
|
|
|
|
if (is_valid_ether_addr(addr)) {
|
|
/* eeprom values are valid so use them */
|
|
eth_hw_addr_set(dev, addr);
|
|
netif_dbg(pd, probe, pd->dev,
|
|
"Mac Address is read from EEPROM\n");
|
|
} else {
|
|
/* eeprom values are invalid, generate random MAC */
|
|
eth_hw_addr_random(dev);
|
|
smsc9420_set_mac_address(dev);
|
|
netif_dbg(pd, probe, pd->dev,
|
|
"MAC Address is set to random\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
static void smsc9420_stop_tx(struct smsc9420_pdata *pd)
|
|
{
|
|
u32 dmac_control, mac_cr, dma_intr_ena;
|
|
int timeout = 1000;
|
|
|
|
/* disable TX DMAC */
|
|
dmac_control = smsc9420_reg_read(pd, DMAC_CONTROL);
|
|
dmac_control &= (~DMAC_CONTROL_ST_);
|
|
smsc9420_reg_write(pd, DMAC_CONTROL, dmac_control);
|
|
|
|
/* Wait max 10ms for transmit process to stop */
|
|
while (--timeout) {
|
|
if (smsc9420_reg_read(pd, DMAC_STATUS) & DMAC_STS_TS_)
|
|
break;
|
|
udelay(10);
|
|
}
|
|
|
|
if (!timeout)
|
|
netif_warn(pd, ifdown, pd->dev, "TX DMAC failed to stop\n");
|
|
|
|
/* ACK Tx DMAC stop bit */
|
|
smsc9420_reg_write(pd, DMAC_STATUS, DMAC_STS_TXPS_);
|
|
|
|
/* mask TX DMAC interrupts */
|
|
dma_intr_ena = smsc9420_reg_read(pd, DMAC_INTR_ENA);
|
|
dma_intr_ena &= ~(DMAC_INTR_ENA_TX_);
|
|
smsc9420_reg_write(pd, DMAC_INTR_ENA, dma_intr_ena);
|
|
smsc9420_pci_flush_write(pd);
|
|
|
|
/* stop MAC TX */
|
|
mac_cr = smsc9420_reg_read(pd, MAC_CR) & (~MAC_CR_TXEN_);
|
|
smsc9420_reg_write(pd, MAC_CR, mac_cr);
|
|
smsc9420_pci_flush_write(pd);
|
|
}
|
|
|
|
static void smsc9420_free_tx_ring(struct smsc9420_pdata *pd)
|
|
{
|
|
int i;
|
|
|
|
BUG_ON(!pd->tx_ring);
|
|
|
|
if (!pd->tx_buffers)
|
|
return;
|
|
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
struct sk_buff *skb = pd->tx_buffers[i].skb;
|
|
|
|
if (skb) {
|
|
BUG_ON(!pd->tx_buffers[i].mapping);
|
|
dma_unmap_single(&pd->pdev->dev,
|
|
pd->tx_buffers[i].mapping, skb->len,
|
|
DMA_TO_DEVICE);
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
|
|
pd->tx_ring[i].status = 0;
|
|
pd->tx_ring[i].length = 0;
|
|
pd->tx_ring[i].buffer1 = 0;
|
|
pd->tx_ring[i].buffer2 = 0;
|
|
}
|
|
wmb();
|
|
|
|
kfree(pd->tx_buffers);
|
|
pd->tx_buffers = NULL;
|
|
|
|
pd->tx_ring_head = 0;
|
|
pd->tx_ring_tail = 0;
|
|
}
|
|
|
|
static void smsc9420_free_rx_ring(struct smsc9420_pdata *pd)
|
|
{
|
|
int i;
|
|
|
|
BUG_ON(!pd->rx_ring);
|
|
|
|
if (!pd->rx_buffers)
|
|
return;
|
|
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
if (pd->rx_buffers[i].skb)
|
|
dev_kfree_skb_any(pd->rx_buffers[i].skb);
|
|
|
|
if (pd->rx_buffers[i].mapping)
|
|
dma_unmap_single(&pd->pdev->dev,
|
|
pd->rx_buffers[i].mapping,
|
|
PKT_BUF_SZ, DMA_FROM_DEVICE);
|
|
|
|
pd->rx_ring[i].status = 0;
|
|
pd->rx_ring[i].length = 0;
|
|
pd->rx_ring[i].buffer1 = 0;
|
|
pd->rx_ring[i].buffer2 = 0;
|
|
}
|
|
wmb();
|
|
|
|
kfree(pd->rx_buffers);
|
|
pd->rx_buffers = NULL;
|
|
|
|
pd->rx_ring_head = 0;
|
|
pd->rx_ring_tail = 0;
|
|
}
|
|
|
|
static void smsc9420_stop_rx(struct smsc9420_pdata *pd)
|
|
{
|
|
int timeout = 1000;
|
|
u32 mac_cr, dmac_control, dma_intr_ena;
|
|
|
|
/* mask RX DMAC interrupts */
|
|
dma_intr_ena = smsc9420_reg_read(pd, DMAC_INTR_ENA);
|
|
dma_intr_ena &= (~DMAC_INTR_ENA_RX_);
|
|
smsc9420_reg_write(pd, DMAC_INTR_ENA, dma_intr_ena);
|
|
smsc9420_pci_flush_write(pd);
|
|
|
|
/* stop RX MAC prior to stoping DMA */
|
|
mac_cr = smsc9420_reg_read(pd, MAC_CR) & (~MAC_CR_RXEN_);
|
|
smsc9420_reg_write(pd, MAC_CR, mac_cr);
|
|
smsc9420_pci_flush_write(pd);
|
|
|
|
/* stop RX DMAC */
|
|
dmac_control = smsc9420_reg_read(pd, DMAC_CONTROL);
|
|
dmac_control &= (~DMAC_CONTROL_SR_);
|
|
smsc9420_reg_write(pd, DMAC_CONTROL, dmac_control);
|
|
smsc9420_pci_flush_write(pd);
|
|
|
|
/* wait up to 10ms for receive to stop */
|
|
while (--timeout) {
|
|
if (smsc9420_reg_read(pd, DMAC_STATUS) & DMAC_STS_RS_)
|
|
break;
|
|
udelay(10);
|
|
}
|
|
|
|
if (!timeout)
|
|
netif_warn(pd, ifdown, pd->dev,
|
|
"RX DMAC did not stop! timeout\n");
|
|
|
|
/* ACK the Rx DMAC stop bit */
|
|
smsc9420_reg_write(pd, DMAC_STATUS, DMAC_STS_RXPS_);
|
|
}
|
|
|
|
static irqreturn_t smsc9420_isr(int irq, void *dev_id)
|
|
{
|
|
struct smsc9420_pdata *pd = dev_id;
|
|
u32 int_cfg, int_sts, int_ctl;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
ulong flags;
|
|
|
|
BUG_ON(!pd);
|
|
BUG_ON(!pd->ioaddr);
|
|
|
|
int_cfg = smsc9420_reg_read(pd, INT_CFG);
|
|
|
|
/* check if it's our interrupt */
|
|
if ((int_cfg & (INT_CFG_IRQ_EN_ | INT_CFG_IRQ_INT_)) !=
|
|
(INT_CFG_IRQ_EN_ | INT_CFG_IRQ_INT_))
|
|
return IRQ_NONE;
|
|
|
|
int_sts = smsc9420_reg_read(pd, INT_STAT);
|
|
|
|
if (likely(INT_STAT_DMAC_INT_ & int_sts)) {
|
|
u32 status = smsc9420_reg_read(pd, DMAC_STATUS);
|
|
u32 ints_to_clear = 0;
|
|
|
|
if (status & DMAC_STS_TX_) {
|
|
ints_to_clear |= (DMAC_STS_TX_ | DMAC_STS_NIS_);
|
|
netif_wake_queue(pd->dev);
|
|
}
|
|
|
|
if (status & DMAC_STS_RX_) {
|
|
/* mask RX DMAC interrupts */
|
|
u32 dma_intr_ena = smsc9420_reg_read(pd, DMAC_INTR_ENA);
|
|
dma_intr_ena &= (~DMAC_INTR_ENA_RX_);
|
|
smsc9420_reg_write(pd, DMAC_INTR_ENA, dma_intr_ena);
|
|
smsc9420_pci_flush_write(pd);
|
|
|
|
ints_to_clear |= (DMAC_STS_RX_ | DMAC_STS_NIS_);
|
|
napi_schedule(&pd->napi);
|
|
}
|
|
|
|
if (ints_to_clear)
|
|
smsc9420_reg_write(pd, DMAC_STATUS, ints_to_clear);
|
|
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
if (unlikely(INT_STAT_SW_INT_ & int_sts)) {
|
|
/* mask software interrupt */
|
|
spin_lock_irqsave(&pd->int_lock, flags);
|
|
int_ctl = smsc9420_reg_read(pd, INT_CTL);
|
|
int_ctl &= (~INT_CTL_SW_INT_EN_);
|
|
smsc9420_reg_write(pd, INT_CTL, int_ctl);
|
|
spin_unlock_irqrestore(&pd->int_lock, flags);
|
|
|
|
smsc9420_reg_write(pd, INT_STAT, INT_STAT_SW_INT_);
|
|
pd->software_irq_signal = true;
|
|
smp_wmb();
|
|
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
/* to ensure PCI write completion, we must perform a PCI read */
|
|
smsc9420_pci_flush_write(pd);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static void smsc9420_poll_controller(struct net_device *dev)
|
|
{
|
|
struct smsc9420_pdata *pd = netdev_priv(dev);
|
|
const int irq = pd->pdev->irq;
|
|
|
|
disable_irq(irq);
|
|
smsc9420_isr(0, dev);
|
|
enable_irq(irq);
|
|
}
|
|
#endif /* CONFIG_NET_POLL_CONTROLLER */
|
|
|
|
static void smsc9420_dmac_soft_reset(struct smsc9420_pdata *pd)
|
|
{
|
|
smsc9420_reg_write(pd, BUS_MODE, BUS_MODE_SWR_);
|
|
smsc9420_reg_read(pd, BUS_MODE);
|
|
udelay(2);
|
|
if (smsc9420_reg_read(pd, BUS_MODE) & BUS_MODE_SWR_)
|
|
netif_warn(pd, drv, pd->dev, "Software reset not cleared\n");
|
|
}
|
|
|
|
static int smsc9420_stop(struct net_device *dev)
|
|
{
|
|
struct smsc9420_pdata *pd = netdev_priv(dev);
|
|
u32 int_cfg;
|
|
ulong flags;
|
|
|
|
BUG_ON(!pd);
|
|
BUG_ON(!dev->phydev);
|
|
|
|
/* disable master interrupt */
|
|
spin_lock_irqsave(&pd->int_lock, flags);
|
|
int_cfg = smsc9420_reg_read(pd, INT_CFG) & (~INT_CFG_IRQ_EN_);
|
|
smsc9420_reg_write(pd, INT_CFG, int_cfg);
|
|
spin_unlock_irqrestore(&pd->int_lock, flags);
|
|
|
|
netif_tx_disable(dev);
|
|
napi_disable(&pd->napi);
|
|
|
|
smsc9420_stop_tx(pd);
|
|
smsc9420_free_tx_ring(pd);
|
|
|
|
smsc9420_stop_rx(pd);
|
|
smsc9420_free_rx_ring(pd);
|
|
|
|
free_irq(pd->pdev->irq, pd);
|
|
|
|
smsc9420_dmac_soft_reset(pd);
|
|
|
|
phy_stop(dev->phydev);
|
|
|
|
phy_disconnect(dev->phydev);
|
|
mdiobus_unregister(pd->mii_bus);
|
|
mdiobus_free(pd->mii_bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void smsc9420_rx_count_stats(struct net_device *dev, u32 desc_status)
|
|
{
|
|
if (unlikely(desc_status & RDES0_ERROR_SUMMARY_)) {
|
|
dev->stats.rx_errors++;
|
|
if (desc_status & RDES0_DESCRIPTOR_ERROR_)
|
|
dev->stats.rx_over_errors++;
|
|
else if (desc_status & (RDES0_FRAME_TOO_LONG_ |
|
|
RDES0_RUNT_FRAME_ | RDES0_COLLISION_SEEN_))
|
|
dev->stats.rx_frame_errors++;
|
|
else if (desc_status & RDES0_CRC_ERROR_)
|
|
dev->stats.rx_crc_errors++;
|
|
}
|
|
|
|
if (unlikely(desc_status & RDES0_LENGTH_ERROR_))
|
|
dev->stats.rx_length_errors++;
|
|
|
|
if (unlikely(!((desc_status & RDES0_LAST_DESCRIPTOR_) &&
|
|
(desc_status & RDES0_FIRST_DESCRIPTOR_))))
|
|
dev->stats.rx_length_errors++;
|
|
|
|
if (desc_status & RDES0_MULTICAST_FRAME_)
|
|
dev->stats.multicast++;
|
|
}
|
|
|
|
static void smsc9420_rx_handoff(struct smsc9420_pdata *pd, const int index,
|
|
const u32 status)
|
|
{
|
|
struct net_device *dev = pd->dev;
|
|
struct sk_buff *skb;
|
|
u16 packet_length = (status & RDES0_FRAME_LENGTH_MASK_)
|
|
>> RDES0_FRAME_LENGTH_SHFT_;
|
|
|
|
/* remove crc from packet lendth */
|
|
packet_length -= 4;
|
|
|
|
if (pd->rx_csum)
|
|
packet_length -= 2;
|
|
|
|
dev->stats.rx_packets++;
|
|
dev->stats.rx_bytes += packet_length;
|
|
|
|
dma_unmap_single(&pd->pdev->dev, pd->rx_buffers[index].mapping,
|
|
PKT_BUF_SZ, DMA_FROM_DEVICE);
|
|
pd->rx_buffers[index].mapping = 0;
|
|
|
|
skb = pd->rx_buffers[index].skb;
|
|
pd->rx_buffers[index].skb = NULL;
|
|
|
|
if (pd->rx_csum) {
|
|
u16 hw_csum = get_unaligned_le16(skb_tail_pointer(skb) +
|
|
NET_IP_ALIGN + packet_length + 4);
|
|
put_unaligned_le16(hw_csum, &skb->csum);
|
|
skb->ip_summed = CHECKSUM_COMPLETE;
|
|
}
|
|
|
|
skb_reserve(skb, NET_IP_ALIGN);
|
|
skb_put(skb, packet_length);
|
|
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
|
|
netif_receive_skb(skb);
|
|
}
|
|
|
|
static int smsc9420_alloc_rx_buffer(struct smsc9420_pdata *pd, int index)
|
|
{
|
|
struct sk_buff *skb = netdev_alloc_skb(pd->dev, PKT_BUF_SZ);
|
|
dma_addr_t mapping;
|
|
|
|
BUG_ON(pd->rx_buffers[index].skb);
|
|
BUG_ON(pd->rx_buffers[index].mapping);
|
|
|
|
if (unlikely(!skb))
|
|
return -ENOMEM;
|
|
|
|
mapping = dma_map_single(&pd->pdev->dev, skb_tail_pointer(skb),
|
|
PKT_BUF_SZ, DMA_FROM_DEVICE);
|
|
if (dma_mapping_error(&pd->pdev->dev, mapping)) {
|
|
dev_kfree_skb_any(skb);
|
|
netif_warn(pd, rx_err, pd->dev, "dma_map_single failed!\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pd->rx_buffers[index].skb = skb;
|
|
pd->rx_buffers[index].mapping = mapping;
|
|
pd->rx_ring[index].buffer1 = mapping + NET_IP_ALIGN;
|
|
pd->rx_ring[index].status = RDES0_OWN_;
|
|
wmb();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void smsc9420_alloc_new_rx_buffers(struct smsc9420_pdata *pd)
|
|
{
|
|
while (pd->rx_ring_tail != pd->rx_ring_head) {
|
|
if (smsc9420_alloc_rx_buffer(pd, pd->rx_ring_tail))
|
|
break;
|
|
|
|
pd->rx_ring_tail = (pd->rx_ring_tail + 1) % RX_RING_SIZE;
|
|
}
|
|
}
|
|
|
|
static int smsc9420_rx_poll(struct napi_struct *napi, int budget)
|
|
{
|
|
struct smsc9420_pdata *pd =
|
|
container_of(napi, struct smsc9420_pdata, napi);
|
|
struct net_device *dev = pd->dev;
|
|
u32 drop_frame_cnt, dma_intr_ena, status;
|
|
int work_done;
|
|
|
|
for (work_done = 0; work_done < budget; work_done++) {
|
|
rmb();
|
|
status = pd->rx_ring[pd->rx_ring_head].status;
|
|
|
|
/* stop if DMAC owns this dma descriptor */
|
|
if (status & RDES0_OWN_)
|
|
break;
|
|
|
|
smsc9420_rx_count_stats(dev, status);
|
|
smsc9420_rx_handoff(pd, pd->rx_ring_head, status);
|
|
pd->rx_ring_head = (pd->rx_ring_head + 1) % RX_RING_SIZE;
|
|
smsc9420_alloc_new_rx_buffers(pd);
|
|
}
|
|
|
|
drop_frame_cnt = smsc9420_reg_read(pd, MISS_FRAME_CNTR);
|
|
dev->stats.rx_dropped +=
|
|
(drop_frame_cnt & 0xFFFF) + ((drop_frame_cnt >> 17) & 0x3FF);
|
|
|
|
/* Kick RXDMA */
|
|
smsc9420_reg_write(pd, RX_POLL_DEMAND, 1);
|
|
smsc9420_pci_flush_write(pd);
|
|
|
|
if (work_done < budget) {
|
|
napi_complete_done(&pd->napi, work_done);
|
|
|
|
/* re-enable RX DMA interrupts */
|
|
dma_intr_ena = smsc9420_reg_read(pd, DMAC_INTR_ENA);
|
|
dma_intr_ena |= (DMAC_INTR_ENA_RX_ | DMAC_INTR_ENA_NIS_);
|
|
smsc9420_reg_write(pd, DMAC_INTR_ENA, dma_intr_ena);
|
|
smsc9420_pci_flush_write(pd);
|
|
}
|
|
return work_done;
|
|
}
|
|
|
|
static void
|
|
smsc9420_tx_update_stats(struct net_device *dev, u32 status, u32 length)
|
|
{
|
|
if (unlikely(status & TDES0_ERROR_SUMMARY_)) {
|
|
dev->stats.tx_errors++;
|
|
if (status & (TDES0_EXCESSIVE_DEFERRAL_ |
|
|
TDES0_EXCESSIVE_COLLISIONS_))
|
|
dev->stats.tx_aborted_errors++;
|
|
|
|
if (status & (TDES0_LOSS_OF_CARRIER_ | TDES0_NO_CARRIER_))
|
|
dev->stats.tx_carrier_errors++;
|
|
} else {
|
|
dev->stats.tx_packets++;
|
|
dev->stats.tx_bytes += (length & 0x7FF);
|
|
}
|
|
|
|
if (unlikely(status & TDES0_EXCESSIVE_COLLISIONS_)) {
|
|
dev->stats.collisions += 16;
|
|
} else {
|
|
dev->stats.collisions +=
|
|
(status & TDES0_COLLISION_COUNT_MASK_) >>
|
|
TDES0_COLLISION_COUNT_SHFT_;
|
|
}
|
|
|
|
if (unlikely(status & TDES0_HEARTBEAT_FAIL_))
|
|
dev->stats.tx_heartbeat_errors++;
|
|
}
|
|
|
|
/* Check for completed dma transfers, update stats and free skbs */
|
|
static void smsc9420_complete_tx(struct net_device *dev)
|
|
{
|
|
struct smsc9420_pdata *pd = netdev_priv(dev);
|
|
|
|
while (pd->tx_ring_tail != pd->tx_ring_head) {
|
|
int index = pd->tx_ring_tail;
|
|
u32 status, length;
|
|
|
|
rmb();
|
|
status = pd->tx_ring[index].status;
|
|
length = pd->tx_ring[index].length;
|
|
|
|
/* Check if DMA still owns this descriptor */
|
|
if (unlikely(TDES0_OWN_ & status))
|
|
break;
|
|
|
|
smsc9420_tx_update_stats(dev, status, length);
|
|
|
|
BUG_ON(!pd->tx_buffers[index].skb);
|
|
BUG_ON(!pd->tx_buffers[index].mapping);
|
|
|
|
dma_unmap_single(&pd->pdev->dev,
|
|
pd->tx_buffers[index].mapping,
|
|
pd->tx_buffers[index].skb->len,
|
|
DMA_TO_DEVICE);
|
|
pd->tx_buffers[index].mapping = 0;
|
|
|
|
dev_kfree_skb_any(pd->tx_buffers[index].skb);
|
|
pd->tx_buffers[index].skb = NULL;
|
|
|
|
pd->tx_ring[index].buffer1 = 0;
|
|
wmb();
|
|
|
|
pd->tx_ring_tail = (pd->tx_ring_tail + 1) % TX_RING_SIZE;
|
|
}
|
|
}
|
|
|
|
static netdev_tx_t smsc9420_hard_start_xmit(struct sk_buff *skb,
|
|
struct net_device *dev)
|
|
{
|
|
struct smsc9420_pdata *pd = netdev_priv(dev);
|
|
dma_addr_t mapping;
|
|
int index = pd->tx_ring_head;
|
|
u32 tmp_desc1;
|
|
bool about_to_take_last_desc =
|
|
(((pd->tx_ring_head + 2) % TX_RING_SIZE) == pd->tx_ring_tail);
|
|
|
|
smsc9420_complete_tx(dev);
|
|
|
|
rmb();
|
|
BUG_ON(pd->tx_ring[index].status & TDES0_OWN_);
|
|
BUG_ON(pd->tx_buffers[index].skb);
|
|
BUG_ON(pd->tx_buffers[index].mapping);
|
|
|
|
mapping = dma_map_single(&pd->pdev->dev, skb->data, skb->len,
|
|
DMA_TO_DEVICE);
|
|
if (dma_mapping_error(&pd->pdev->dev, mapping)) {
|
|
netif_warn(pd, tx_err, pd->dev,
|
|
"dma_map_single failed, dropping packet\n");
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
pd->tx_buffers[index].skb = skb;
|
|
pd->tx_buffers[index].mapping = mapping;
|
|
|
|
tmp_desc1 = (TDES1_LS_ | ((u32)skb->len & 0x7FF));
|
|
if (unlikely(about_to_take_last_desc)) {
|
|
tmp_desc1 |= TDES1_IC_;
|
|
netif_stop_queue(pd->dev);
|
|
}
|
|
|
|
/* check if we are at the last descriptor and need to set EOR */
|
|
if (unlikely(index == (TX_RING_SIZE - 1)))
|
|
tmp_desc1 |= TDES1_TER_;
|
|
|
|
pd->tx_ring[index].buffer1 = mapping;
|
|
pd->tx_ring[index].length = tmp_desc1;
|
|
wmb();
|
|
|
|
/* increment head */
|
|
pd->tx_ring_head = (pd->tx_ring_head + 1) % TX_RING_SIZE;
|
|
|
|
/* assign ownership to DMAC */
|
|
pd->tx_ring[index].status = TDES0_OWN_;
|
|
wmb();
|
|
|
|
skb_tx_timestamp(skb);
|
|
|
|
/* kick the DMA */
|
|
smsc9420_reg_write(pd, TX_POLL_DEMAND, 1);
|
|
smsc9420_pci_flush_write(pd);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static struct net_device_stats *smsc9420_get_stats(struct net_device *dev)
|
|
{
|
|
struct smsc9420_pdata *pd = netdev_priv(dev);
|
|
u32 counter = smsc9420_reg_read(pd, MISS_FRAME_CNTR);
|
|
dev->stats.rx_dropped +=
|
|
(counter & 0x0000FFFF) + ((counter >> 17) & 0x000003FF);
|
|
return &dev->stats;
|
|
}
|
|
|
|
static void smsc9420_set_multicast_list(struct net_device *dev)
|
|
{
|
|
struct smsc9420_pdata *pd = netdev_priv(dev);
|
|
u32 mac_cr = smsc9420_reg_read(pd, MAC_CR);
|
|
|
|
if (dev->flags & IFF_PROMISC) {
|
|
netif_dbg(pd, hw, pd->dev, "Promiscuous Mode Enabled\n");
|
|
mac_cr |= MAC_CR_PRMS_;
|
|
mac_cr &= (~MAC_CR_MCPAS_);
|
|
mac_cr &= (~MAC_CR_HPFILT_);
|
|
} else if (dev->flags & IFF_ALLMULTI) {
|
|
netif_dbg(pd, hw, pd->dev, "Receive all Multicast Enabled\n");
|
|
mac_cr &= (~MAC_CR_PRMS_);
|
|
mac_cr |= MAC_CR_MCPAS_;
|
|
mac_cr &= (~MAC_CR_HPFILT_);
|
|
} else if (!netdev_mc_empty(dev)) {
|
|
struct netdev_hw_addr *ha;
|
|
u32 hash_lo = 0, hash_hi = 0;
|
|
|
|
netif_dbg(pd, hw, pd->dev, "Multicast filter enabled\n");
|
|
netdev_for_each_mc_addr(ha, dev) {
|
|
u32 bit_num = smsc9420_hash(ha->addr);
|
|
u32 mask = 1 << (bit_num & 0x1F);
|
|
|
|
if (bit_num & 0x20)
|
|
hash_hi |= mask;
|
|
else
|
|
hash_lo |= mask;
|
|
|
|
}
|
|
smsc9420_reg_write(pd, HASHH, hash_hi);
|
|
smsc9420_reg_write(pd, HASHL, hash_lo);
|
|
|
|
mac_cr &= (~MAC_CR_PRMS_);
|
|
mac_cr &= (~MAC_CR_MCPAS_);
|
|
mac_cr |= MAC_CR_HPFILT_;
|
|
} else {
|
|
netif_dbg(pd, hw, pd->dev, "Receive own packets only\n");
|
|
smsc9420_reg_write(pd, HASHH, 0);
|
|
smsc9420_reg_write(pd, HASHL, 0);
|
|
|
|
mac_cr &= (~MAC_CR_PRMS_);
|
|
mac_cr &= (~MAC_CR_MCPAS_);
|
|
mac_cr &= (~MAC_CR_HPFILT_);
|
|
}
|
|
|
|
smsc9420_reg_write(pd, MAC_CR, mac_cr);
|
|
smsc9420_pci_flush_write(pd);
|
|
}
|
|
|
|
static void smsc9420_phy_update_flowcontrol(struct smsc9420_pdata *pd)
|
|
{
|
|
struct net_device *dev = pd->dev;
|
|
struct phy_device *phy_dev = dev->phydev;
|
|
u32 flow;
|
|
|
|
if (phy_dev->duplex == DUPLEX_FULL) {
|
|
u16 lcladv = phy_read(phy_dev, MII_ADVERTISE);
|
|
u16 rmtadv = phy_read(phy_dev, MII_LPA);
|
|
u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
|
|
|
|
if (cap & FLOW_CTRL_RX)
|
|
flow = 0xFFFF0002;
|
|
else
|
|
flow = 0;
|
|
|
|
netif_info(pd, link, pd->dev, "rx pause %s, tx pause %s\n",
|
|
cap & FLOW_CTRL_RX ? "enabled" : "disabled",
|
|
cap & FLOW_CTRL_TX ? "enabled" : "disabled");
|
|
} else {
|
|
netif_info(pd, link, pd->dev, "half duplex\n");
|
|
flow = 0;
|
|
}
|
|
|
|
smsc9420_reg_write(pd, FLOW, flow);
|
|
}
|
|
|
|
/* Update link mode if anything has changed. Called periodically when the
|
|
* PHY is in polling mode, even if nothing has changed. */
|
|
static void smsc9420_phy_adjust_link(struct net_device *dev)
|
|
{
|
|
struct smsc9420_pdata *pd = netdev_priv(dev);
|
|
struct phy_device *phy_dev = dev->phydev;
|
|
int carrier;
|
|
|
|
if (phy_dev->duplex != pd->last_duplex) {
|
|
u32 mac_cr = smsc9420_reg_read(pd, MAC_CR);
|
|
if (phy_dev->duplex) {
|
|
netif_dbg(pd, link, pd->dev, "full duplex mode\n");
|
|
mac_cr |= MAC_CR_FDPX_;
|
|
} else {
|
|
netif_dbg(pd, link, pd->dev, "half duplex mode\n");
|
|
mac_cr &= ~MAC_CR_FDPX_;
|
|
}
|
|
smsc9420_reg_write(pd, MAC_CR, mac_cr);
|
|
|
|
smsc9420_phy_update_flowcontrol(pd);
|
|
pd->last_duplex = phy_dev->duplex;
|
|
}
|
|
|
|
carrier = netif_carrier_ok(dev);
|
|
if (carrier != pd->last_carrier) {
|
|
if (carrier)
|
|
netif_dbg(pd, link, pd->dev, "carrier OK\n");
|
|
else
|
|
netif_dbg(pd, link, pd->dev, "no carrier\n");
|
|
pd->last_carrier = carrier;
|
|
}
|
|
}
|
|
|
|
static int smsc9420_mii_probe(struct net_device *dev)
|
|
{
|
|
struct smsc9420_pdata *pd = netdev_priv(dev);
|
|
struct phy_device *phydev = NULL;
|
|
|
|
BUG_ON(dev->phydev);
|
|
|
|
/* Device only supports internal PHY at address 1 */
|
|
phydev = mdiobus_get_phy(pd->mii_bus, 1);
|
|
if (!phydev) {
|
|
netdev_err(dev, "no PHY found at address 1\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
phydev = phy_connect(dev, phydev_name(phydev),
|
|
smsc9420_phy_adjust_link, PHY_INTERFACE_MODE_MII);
|
|
|
|
if (IS_ERR(phydev)) {
|
|
netdev_err(dev, "Could not attach to PHY\n");
|
|
return PTR_ERR(phydev);
|
|
}
|
|
|
|
phy_set_max_speed(phydev, SPEED_100);
|
|
|
|
/* mask with MAC supported features */
|
|
phy_support_asym_pause(phydev);
|
|
|
|
phy_attached_info(phydev);
|
|
|
|
pd->last_duplex = -1;
|
|
pd->last_carrier = -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int smsc9420_mii_init(struct net_device *dev)
|
|
{
|
|
struct smsc9420_pdata *pd = netdev_priv(dev);
|
|
int err = -ENXIO;
|
|
|
|
pd->mii_bus = mdiobus_alloc();
|
|
if (!pd->mii_bus) {
|
|
err = -ENOMEM;
|
|
goto err_out_1;
|
|
}
|
|
pd->mii_bus->name = DRV_MDIONAME;
|
|
snprintf(pd->mii_bus->id, MII_BUS_ID_SIZE, "%x",
|
|
(pd->pdev->bus->number << 8) | pd->pdev->devfn);
|
|
pd->mii_bus->priv = pd;
|
|
pd->mii_bus->read = smsc9420_mii_read;
|
|
pd->mii_bus->write = smsc9420_mii_write;
|
|
|
|
/* Mask all PHYs except ID 1 (internal) */
|
|
pd->mii_bus->phy_mask = ~(1 << 1);
|
|
|
|
if (mdiobus_register(pd->mii_bus)) {
|
|
netif_warn(pd, probe, pd->dev, "Error registering mii bus\n");
|
|
goto err_out_free_bus_2;
|
|
}
|
|
|
|
if (smsc9420_mii_probe(dev) < 0) {
|
|
netif_warn(pd, probe, pd->dev, "Error probing mii bus\n");
|
|
goto err_out_unregister_bus_3;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_out_unregister_bus_3:
|
|
mdiobus_unregister(pd->mii_bus);
|
|
err_out_free_bus_2:
|
|
mdiobus_free(pd->mii_bus);
|
|
err_out_1:
|
|
return err;
|
|
}
|
|
|
|
static int smsc9420_alloc_tx_ring(struct smsc9420_pdata *pd)
|
|
{
|
|
int i;
|
|
|
|
BUG_ON(!pd->tx_ring);
|
|
|
|
pd->tx_buffers = kmalloc_array(TX_RING_SIZE,
|
|
sizeof(struct smsc9420_ring_info),
|
|
GFP_KERNEL);
|
|
if (!pd->tx_buffers)
|
|
return -ENOMEM;
|
|
|
|
/* Initialize the TX Ring */
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
pd->tx_buffers[i].skb = NULL;
|
|
pd->tx_buffers[i].mapping = 0;
|
|
pd->tx_ring[i].status = 0;
|
|
pd->tx_ring[i].length = 0;
|
|
pd->tx_ring[i].buffer1 = 0;
|
|
pd->tx_ring[i].buffer2 = 0;
|
|
}
|
|
pd->tx_ring[TX_RING_SIZE - 1].length = TDES1_TER_;
|
|
wmb();
|
|
|
|
pd->tx_ring_head = 0;
|
|
pd->tx_ring_tail = 0;
|
|
|
|
smsc9420_reg_write(pd, TX_BASE_ADDR, pd->tx_dma_addr);
|
|
smsc9420_pci_flush_write(pd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int smsc9420_alloc_rx_ring(struct smsc9420_pdata *pd)
|
|
{
|
|
int i;
|
|
|
|
BUG_ON(!pd->rx_ring);
|
|
|
|
pd->rx_buffers = kmalloc_array(RX_RING_SIZE,
|
|
sizeof(struct smsc9420_ring_info),
|
|
GFP_KERNEL);
|
|
if (pd->rx_buffers == NULL)
|
|
goto out;
|
|
|
|
/* initialize the rx ring */
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
pd->rx_ring[i].status = 0;
|
|
pd->rx_ring[i].length = PKT_BUF_SZ;
|
|
pd->rx_ring[i].buffer2 = 0;
|
|
pd->rx_buffers[i].skb = NULL;
|
|
pd->rx_buffers[i].mapping = 0;
|
|
}
|
|
pd->rx_ring[RX_RING_SIZE - 1].length = (PKT_BUF_SZ | RDES1_RER_);
|
|
|
|
/* now allocate the entire ring of skbs */
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
if (smsc9420_alloc_rx_buffer(pd, i)) {
|
|
netif_warn(pd, ifup, pd->dev,
|
|
"failed to allocate rx skb %d\n", i);
|
|
goto out_free_rx_skbs;
|
|
}
|
|
}
|
|
|
|
pd->rx_ring_head = 0;
|
|
pd->rx_ring_tail = 0;
|
|
|
|
smsc9420_reg_write(pd, VLAN1, ETH_P_8021Q);
|
|
netif_dbg(pd, ifup, pd->dev, "VLAN1 = 0x%08x\n",
|
|
smsc9420_reg_read(pd, VLAN1));
|
|
|
|
if (pd->rx_csum) {
|
|
/* Enable RX COE */
|
|
u32 coe = smsc9420_reg_read(pd, COE_CR) | RX_COE_EN;
|
|
smsc9420_reg_write(pd, COE_CR, coe);
|
|
netif_dbg(pd, ifup, pd->dev, "COE_CR = 0x%08x\n", coe);
|
|
}
|
|
|
|
smsc9420_reg_write(pd, RX_BASE_ADDR, pd->rx_dma_addr);
|
|
smsc9420_pci_flush_write(pd);
|
|
|
|
return 0;
|
|
|
|
out_free_rx_skbs:
|
|
smsc9420_free_rx_ring(pd);
|
|
out:
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static int smsc9420_open(struct net_device *dev)
|
|
{
|
|
struct smsc9420_pdata *pd = netdev_priv(dev);
|
|
u32 bus_mode, mac_cr, dmac_control, int_cfg, dma_intr_ena, int_ctl;
|
|
const int irq = pd->pdev->irq;
|
|
unsigned long flags;
|
|
int result = 0, timeout;
|
|
|
|
if (!is_valid_ether_addr(dev->dev_addr)) {
|
|
netif_warn(pd, ifup, pd->dev,
|
|
"dev_addr is not a valid MAC address\n");
|
|
result = -EADDRNOTAVAIL;
|
|
goto out_0;
|
|
}
|
|
|
|
netif_carrier_off(dev);
|
|
|
|
/* disable, mask and acknowledge all interrupts */
|
|
spin_lock_irqsave(&pd->int_lock, flags);
|
|
int_cfg = smsc9420_reg_read(pd, INT_CFG) & (~INT_CFG_IRQ_EN_);
|
|
smsc9420_reg_write(pd, INT_CFG, int_cfg);
|
|
smsc9420_reg_write(pd, INT_CTL, 0);
|
|
spin_unlock_irqrestore(&pd->int_lock, flags);
|
|
smsc9420_reg_write(pd, DMAC_INTR_ENA, 0);
|
|
smsc9420_reg_write(pd, INT_STAT, 0xFFFFFFFF);
|
|
smsc9420_pci_flush_write(pd);
|
|
|
|
result = request_irq(irq, smsc9420_isr, IRQF_SHARED, DRV_NAME, pd);
|
|
if (result) {
|
|
netif_warn(pd, ifup, pd->dev, "Unable to use IRQ = %d\n", irq);
|
|
result = -ENODEV;
|
|
goto out_0;
|
|
}
|
|
|
|
smsc9420_dmac_soft_reset(pd);
|
|
|
|
/* make sure MAC_CR is sane */
|
|
smsc9420_reg_write(pd, MAC_CR, 0);
|
|
|
|
smsc9420_set_mac_address(dev);
|
|
|
|
/* Configure GPIO pins to drive LEDs */
|
|
smsc9420_reg_write(pd, GPIO_CFG,
|
|
(GPIO_CFG_LED_3_ | GPIO_CFG_LED_2_ | GPIO_CFG_LED_1_));
|
|
|
|
bus_mode = BUS_MODE_DMA_BURST_LENGTH_16;
|
|
|
|
#ifdef __BIG_ENDIAN
|
|
bus_mode |= BUS_MODE_DBO_;
|
|
#endif
|
|
|
|
smsc9420_reg_write(pd, BUS_MODE, bus_mode);
|
|
|
|
smsc9420_pci_flush_write(pd);
|
|
|
|
/* set bus master bridge arbitration priority for Rx and TX DMA */
|
|
smsc9420_reg_write(pd, BUS_CFG, BUS_CFG_RXTXWEIGHT_4_1);
|
|
|
|
smsc9420_reg_write(pd, DMAC_CONTROL,
|
|
(DMAC_CONTROL_SF_ | DMAC_CONTROL_OSF_));
|
|
|
|
smsc9420_pci_flush_write(pd);
|
|
|
|
/* test the IRQ connection to the ISR */
|
|
netif_dbg(pd, ifup, pd->dev, "Testing ISR using IRQ %d\n", irq);
|
|
pd->software_irq_signal = false;
|
|
|
|
spin_lock_irqsave(&pd->int_lock, flags);
|
|
/* configure interrupt deassertion timer and enable interrupts */
|
|
int_cfg = smsc9420_reg_read(pd, INT_CFG) | INT_CFG_IRQ_EN_;
|
|
int_cfg &= ~(INT_CFG_INT_DEAS_MASK);
|
|
int_cfg |= (INT_DEAS_TIME & INT_CFG_INT_DEAS_MASK);
|
|
smsc9420_reg_write(pd, INT_CFG, int_cfg);
|
|
|
|
/* unmask software interrupt */
|
|
int_ctl = smsc9420_reg_read(pd, INT_CTL) | INT_CTL_SW_INT_EN_;
|
|
smsc9420_reg_write(pd, INT_CTL, int_ctl);
|
|
spin_unlock_irqrestore(&pd->int_lock, flags);
|
|
smsc9420_pci_flush_write(pd);
|
|
|
|
timeout = 1000;
|
|
while (timeout--) {
|
|
if (pd->software_irq_signal)
|
|
break;
|
|
msleep(1);
|
|
}
|
|
|
|
/* disable interrupts */
|
|
spin_lock_irqsave(&pd->int_lock, flags);
|
|
int_cfg = smsc9420_reg_read(pd, INT_CFG) & (~INT_CFG_IRQ_EN_);
|
|
smsc9420_reg_write(pd, INT_CFG, int_cfg);
|
|
spin_unlock_irqrestore(&pd->int_lock, flags);
|
|
|
|
if (!pd->software_irq_signal) {
|
|
netif_warn(pd, ifup, pd->dev, "ISR failed signaling test\n");
|
|
result = -ENODEV;
|
|
goto out_free_irq_1;
|
|
}
|
|
|
|
netif_dbg(pd, ifup, pd->dev, "ISR passed test using IRQ %d\n", irq);
|
|
|
|
result = smsc9420_alloc_tx_ring(pd);
|
|
if (result) {
|
|
netif_warn(pd, ifup, pd->dev,
|
|
"Failed to Initialize tx dma ring\n");
|
|
result = -ENOMEM;
|
|
goto out_free_irq_1;
|
|
}
|
|
|
|
result = smsc9420_alloc_rx_ring(pd);
|
|
if (result) {
|
|
netif_warn(pd, ifup, pd->dev,
|
|
"Failed to Initialize rx dma ring\n");
|
|
result = -ENOMEM;
|
|
goto out_free_tx_ring_2;
|
|
}
|
|
|
|
result = smsc9420_mii_init(dev);
|
|
if (result) {
|
|
netif_warn(pd, ifup, pd->dev, "Failed to initialize Phy\n");
|
|
result = -ENODEV;
|
|
goto out_free_rx_ring_3;
|
|
}
|
|
|
|
/* Bring the PHY up */
|
|
phy_start(dev->phydev);
|
|
|
|
napi_enable(&pd->napi);
|
|
|
|
/* start tx and rx */
|
|
mac_cr = smsc9420_reg_read(pd, MAC_CR) | MAC_CR_TXEN_ | MAC_CR_RXEN_;
|
|
smsc9420_reg_write(pd, MAC_CR, mac_cr);
|
|
|
|
dmac_control = smsc9420_reg_read(pd, DMAC_CONTROL);
|
|
dmac_control |= DMAC_CONTROL_ST_ | DMAC_CONTROL_SR_;
|
|
smsc9420_reg_write(pd, DMAC_CONTROL, dmac_control);
|
|
smsc9420_pci_flush_write(pd);
|
|
|
|
dma_intr_ena = smsc9420_reg_read(pd, DMAC_INTR_ENA);
|
|
dma_intr_ena |=
|
|
(DMAC_INTR_ENA_TX_ | DMAC_INTR_ENA_RX_ | DMAC_INTR_ENA_NIS_);
|
|
smsc9420_reg_write(pd, DMAC_INTR_ENA, dma_intr_ena);
|
|
smsc9420_pci_flush_write(pd);
|
|
|
|
netif_wake_queue(dev);
|
|
|
|
smsc9420_reg_write(pd, RX_POLL_DEMAND, 1);
|
|
|
|
/* enable interrupts */
|
|
spin_lock_irqsave(&pd->int_lock, flags);
|
|
int_cfg = smsc9420_reg_read(pd, INT_CFG) | INT_CFG_IRQ_EN_;
|
|
smsc9420_reg_write(pd, INT_CFG, int_cfg);
|
|
spin_unlock_irqrestore(&pd->int_lock, flags);
|
|
|
|
return 0;
|
|
|
|
out_free_rx_ring_3:
|
|
smsc9420_free_rx_ring(pd);
|
|
out_free_tx_ring_2:
|
|
smsc9420_free_tx_ring(pd);
|
|
out_free_irq_1:
|
|
free_irq(irq, pd);
|
|
out_0:
|
|
return result;
|
|
}
|
|
|
|
static int __maybe_unused smsc9420_suspend(struct device *dev_d)
|
|
{
|
|
struct net_device *dev = dev_get_drvdata(dev_d);
|
|
struct smsc9420_pdata *pd = netdev_priv(dev);
|
|
u32 int_cfg;
|
|
ulong flags;
|
|
|
|
/* disable interrupts */
|
|
spin_lock_irqsave(&pd->int_lock, flags);
|
|
int_cfg = smsc9420_reg_read(pd, INT_CFG) & (~INT_CFG_IRQ_EN_);
|
|
smsc9420_reg_write(pd, INT_CFG, int_cfg);
|
|
spin_unlock_irqrestore(&pd->int_lock, flags);
|
|
|
|
if (netif_running(dev)) {
|
|
netif_tx_disable(dev);
|
|
smsc9420_stop_tx(pd);
|
|
smsc9420_free_tx_ring(pd);
|
|
|
|
napi_disable(&pd->napi);
|
|
smsc9420_stop_rx(pd);
|
|
smsc9420_free_rx_ring(pd);
|
|
|
|
free_irq(pd->pdev->irq, pd);
|
|
|
|
netif_device_detach(dev);
|
|
}
|
|
|
|
device_wakeup_disable(dev_d);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused smsc9420_resume(struct device *dev_d)
|
|
{
|
|
struct net_device *dev = dev_get_drvdata(dev_d);
|
|
int err;
|
|
|
|
pci_set_master(to_pci_dev(dev_d));
|
|
|
|
device_wakeup_disable(dev_d);
|
|
|
|
err = 0;
|
|
if (netif_running(dev)) {
|
|
/* FIXME: gross. It looks like ancient PM relic.*/
|
|
err = smsc9420_open(dev);
|
|
netif_device_attach(dev);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static const struct net_device_ops smsc9420_netdev_ops = {
|
|
.ndo_open = smsc9420_open,
|
|
.ndo_stop = smsc9420_stop,
|
|
.ndo_start_xmit = smsc9420_hard_start_xmit,
|
|
.ndo_get_stats = smsc9420_get_stats,
|
|
.ndo_set_rx_mode = smsc9420_set_multicast_list,
|
|
.ndo_eth_ioctl = phy_do_ioctl_running,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_set_mac_address = eth_mac_addr,
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_poll_controller = smsc9420_poll_controller,
|
|
#endif /* CONFIG_NET_POLL_CONTROLLER */
|
|
};
|
|
|
|
static int
|
|
smsc9420_probe(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
struct net_device *dev;
|
|
struct smsc9420_pdata *pd;
|
|
void __iomem *virt_addr;
|
|
int result = 0;
|
|
u32 id_rev;
|
|
|
|
pr_info("%s version %s\n", DRV_DESCRIPTION, DRV_VERSION);
|
|
|
|
/* First do the PCI initialisation */
|
|
result = pci_enable_device(pdev);
|
|
if (unlikely(result)) {
|
|
pr_err("Cannot enable smsc9420\n");
|
|
goto out_0;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
dev = alloc_etherdev(sizeof(*pd));
|
|
if (!dev)
|
|
goto out_disable_pci_device_1;
|
|
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
if (!(pci_resource_flags(pdev, SMSC_BAR) & IORESOURCE_MEM)) {
|
|
netdev_err(dev, "Cannot find PCI device base address\n");
|
|
goto out_free_netdev_2;
|
|
}
|
|
|
|
if ((pci_request_regions(pdev, DRV_NAME))) {
|
|
netdev_err(dev, "Cannot obtain PCI resources, aborting\n");
|
|
goto out_free_netdev_2;
|
|
}
|
|
|
|
if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
|
|
netdev_err(dev, "No usable DMA configuration, aborting\n");
|
|
goto out_free_regions_3;
|
|
}
|
|
|
|
virt_addr = ioremap(pci_resource_start(pdev, SMSC_BAR),
|
|
pci_resource_len(pdev, SMSC_BAR));
|
|
if (!virt_addr) {
|
|
netdev_err(dev, "Cannot map device registers, aborting\n");
|
|
goto out_free_regions_3;
|
|
}
|
|
|
|
/* registers are double mapped with 0 offset for LE and 0x200 for BE */
|
|
virt_addr += LAN9420_CPSR_ENDIAN_OFFSET;
|
|
|
|
pd = netdev_priv(dev);
|
|
|
|
/* pci descriptors are created in the PCI consistent area */
|
|
pd->rx_ring = dma_alloc_coherent(&pdev->dev,
|
|
sizeof(struct smsc9420_dma_desc) * (RX_RING_SIZE + TX_RING_SIZE),
|
|
&pd->rx_dma_addr, GFP_KERNEL);
|
|
|
|
if (!pd->rx_ring)
|
|
goto out_free_io_4;
|
|
|
|
/* descriptors are aligned due to the nature of dma_alloc_coherent */
|
|
pd->tx_ring = (pd->rx_ring + RX_RING_SIZE);
|
|
pd->tx_dma_addr = pd->rx_dma_addr +
|
|
sizeof(struct smsc9420_dma_desc) * RX_RING_SIZE;
|
|
|
|
pd->pdev = pdev;
|
|
pd->dev = dev;
|
|
pd->ioaddr = virt_addr;
|
|
pd->msg_enable = smsc_debug;
|
|
pd->rx_csum = true;
|
|
|
|
netif_dbg(pd, probe, pd->dev, "lan_base=0x%08lx\n", (ulong)virt_addr);
|
|
|
|
id_rev = smsc9420_reg_read(pd, ID_REV);
|
|
switch (id_rev & 0xFFFF0000) {
|
|
case 0x94200000:
|
|
netif_info(pd, probe, pd->dev,
|
|
"LAN9420 identified, ID_REV=0x%08X\n", id_rev);
|
|
break;
|
|
default:
|
|
netif_warn(pd, probe, pd->dev, "LAN9420 NOT identified\n");
|
|
netif_warn(pd, probe, pd->dev, "ID_REV=0x%08X\n", id_rev);
|
|
goto out_free_dmadesc_5;
|
|
}
|
|
|
|
smsc9420_dmac_soft_reset(pd);
|
|
smsc9420_eeprom_reload(pd);
|
|
smsc9420_check_mac_address(dev);
|
|
|
|
dev->netdev_ops = &smsc9420_netdev_ops;
|
|
dev->ethtool_ops = &smsc9420_ethtool_ops;
|
|
|
|
netif_napi_add(dev, &pd->napi, smsc9420_rx_poll, NAPI_WEIGHT);
|
|
|
|
result = register_netdev(dev);
|
|
if (result) {
|
|
netif_warn(pd, probe, pd->dev, "error %i registering device\n",
|
|
result);
|
|
goto out_free_dmadesc_5;
|
|
}
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
|
|
spin_lock_init(&pd->int_lock);
|
|
spin_lock_init(&pd->phy_lock);
|
|
|
|
dev_info(&dev->dev, "MAC Address: %pM\n", dev->dev_addr);
|
|
|
|
return 0;
|
|
|
|
out_free_dmadesc_5:
|
|
dma_free_coherent(&pdev->dev,
|
|
sizeof(struct smsc9420_dma_desc) * (RX_RING_SIZE + TX_RING_SIZE),
|
|
pd->rx_ring, pd->rx_dma_addr);
|
|
out_free_io_4:
|
|
iounmap(virt_addr - LAN9420_CPSR_ENDIAN_OFFSET);
|
|
out_free_regions_3:
|
|
pci_release_regions(pdev);
|
|
out_free_netdev_2:
|
|
free_netdev(dev);
|
|
out_disable_pci_device_1:
|
|
pci_disable_device(pdev);
|
|
out_0:
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void smsc9420_remove(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev;
|
|
struct smsc9420_pdata *pd;
|
|
|
|
dev = pci_get_drvdata(pdev);
|
|
if (!dev)
|
|
return;
|
|
|
|
pd = netdev_priv(dev);
|
|
unregister_netdev(dev);
|
|
|
|
/* tx_buffers and rx_buffers are freed in stop */
|
|
BUG_ON(pd->tx_buffers);
|
|
BUG_ON(pd->rx_buffers);
|
|
|
|
BUG_ON(!pd->tx_ring);
|
|
BUG_ON(!pd->rx_ring);
|
|
|
|
dma_free_coherent(&pdev->dev,
|
|
sizeof(struct smsc9420_dma_desc) * (RX_RING_SIZE + TX_RING_SIZE),
|
|
pd->rx_ring, pd->rx_dma_addr);
|
|
|
|
iounmap(pd->ioaddr - LAN9420_CPSR_ENDIAN_OFFSET);
|
|
pci_release_regions(pdev);
|
|
free_netdev(dev);
|
|
pci_disable_device(pdev);
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(smsc9420_pm_ops, smsc9420_suspend, smsc9420_resume);
|
|
|
|
static struct pci_driver smsc9420_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = smsc9420_id_table,
|
|
.probe = smsc9420_probe,
|
|
.remove = smsc9420_remove,
|
|
.driver.pm = &smsc9420_pm_ops,
|
|
};
|
|
|
|
static int __init smsc9420_init_module(void)
|
|
{
|
|
smsc_debug = netif_msg_init(debug, SMSC_MSG_DEFAULT);
|
|
|
|
return pci_register_driver(&smsc9420_driver);
|
|
}
|
|
|
|
static void __exit smsc9420_exit_module(void)
|
|
{
|
|
pci_unregister_driver(&smsc9420_driver);
|
|
}
|
|
|
|
module_init(smsc9420_init_module);
|
|
module_exit(smsc9420_exit_module);
|