347 lines
9.8 KiB
C
347 lines
9.8 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Panel driver for the Samsung LMS397KF04 480x800 DPI RGB panel.
|
|
* According to the data sheet the display controller is called DB7430.
|
|
* Found in the Samsung Galaxy Beam GT-I8350 mobile phone.
|
|
* Linus Walleij <linus.walleij@linaro.org>
|
|
*/
|
|
#include <drm/drm_mipi_dbi.h>
|
|
#include <drm/drm_modes.h>
|
|
#include <drm/drm_panel.h>
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/media-bus-format.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include <video/mipi_display.h>
|
|
|
|
#define DB7430_ACCESS_PROT_OFF 0xb0
|
|
#define DB7430_UNKNOWN_B4 0xb4
|
|
#define DB7430_USER_SELECT 0xb5
|
|
#define DB7430_UNKNOWN_B7 0xb7
|
|
#define DB7430_UNKNOWN_B8 0xb8
|
|
#define DB7430_PANEL_DRIVING 0xc0
|
|
#define DB7430_SOURCE_CONTROL 0xc1
|
|
#define DB7430_GATE_INTERFACE 0xc4
|
|
#define DB7430_DISPLAY_H_TIMING 0xc5
|
|
#define DB7430_RGB_SYNC_OPTION 0xc6
|
|
#define DB7430_GAMMA_SET_RED 0xc8
|
|
#define DB7430_GAMMA_SET_GREEN 0xc9
|
|
#define DB7430_GAMMA_SET_BLUE 0xca
|
|
#define DB7430_BIAS_CURRENT_CTRL 0xd1
|
|
#define DB7430_DDV_CTRL 0xd2
|
|
#define DB7430_GAMMA_CTRL_REF 0xd3
|
|
#define DB7430_UNKNOWN_D4 0xd4
|
|
#define DB7430_DCDC_CTRL 0xd5
|
|
#define DB7430_VCL_CTRL 0xd6
|
|
#define DB7430_UNKNOWN_F8 0xf8
|
|
#define DB7430_UNKNOWN_FC 0xfc
|
|
|
|
#define DATA_MASK 0x100
|
|
|
|
/**
|
|
* struct db7430 - state container for a panel controlled by the DB7430
|
|
* controller
|
|
*/
|
|
struct db7430 {
|
|
/** @dev: the container device */
|
|
struct device *dev;
|
|
/** @dbi: the DBI bus abstraction handle */
|
|
struct mipi_dbi dbi;
|
|
/** @panel: the DRM panel instance for this device */
|
|
struct drm_panel panel;
|
|
/** @width: the width of this panel in mm */
|
|
u32 width;
|
|
/** @height: the height of this panel in mm */
|
|
u32 height;
|
|
/** @reset: reset GPIO line */
|
|
struct gpio_desc *reset;
|
|
/** @regulators: VCCIO and VIO supply regulators */
|
|
struct regulator_bulk_data regulators[2];
|
|
};
|
|
|
|
static const struct drm_display_mode db7430_480_800_mode = {
|
|
/*
|
|
* 31 ns period min (htotal*vtotal*vrefresh)/1000
|
|
* gives a Vrefresh of ~71 Hz.
|
|
*/
|
|
.clock = 32258,
|
|
.hdisplay = 480,
|
|
.hsync_start = 480 + 10,
|
|
.hsync_end = 480 + 10 + 4,
|
|
.htotal = 480 + 10 + 4 + 40,
|
|
.vdisplay = 800,
|
|
.vsync_start = 800 + 6,
|
|
.vsync_end = 800 + 6 + 1,
|
|
.vtotal = 800 + 6 + 1 + 7,
|
|
.width_mm = 53,
|
|
.height_mm = 87,
|
|
.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
|
|
};
|
|
|
|
static inline struct db7430 *to_db7430(struct drm_panel *panel)
|
|
{
|
|
return container_of(panel, struct db7430, panel);
|
|
}
|
|
|
|
static int db7430_power_on(struct db7430 *db)
|
|
{
|
|
struct mipi_dbi *dbi = &db->dbi;
|
|
int ret;
|
|
|
|
/* Power up */
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(db->regulators),
|
|
db->regulators);
|
|
if (ret) {
|
|
dev_err(db->dev, "failed to enable regulators: %d\n", ret);
|
|
return ret;
|
|
}
|
|
msleep(50);
|
|
|
|
/* Assert reset >=1 ms */
|
|
gpiod_set_value_cansleep(db->reset, 1);
|
|
usleep_range(1000, 5000);
|
|
/* De-assert reset */
|
|
gpiod_set_value_cansleep(db->reset, 0);
|
|
/* Wait >= 10 ms */
|
|
msleep(10);
|
|
dev_dbg(db->dev, "de-asserted RESET\n");
|
|
|
|
/*
|
|
* This is set to 0x0a (RGB/BGR order + horizontal flip) in order
|
|
* to make the display behave normally. If this is not set the displays
|
|
* normal output behaviour is horizontally flipped and BGR ordered. Do
|
|
* it twice because the first message doesn't always "take".
|
|
*/
|
|
mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, 0x0a);
|
|
mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, 0x0a);
|
|
mipi_dbi_command(dbi, DB7430_ACCESS_PROT_OFF, 0x00);
|
|
mipi_dbi_command(dbi, DB7430_PANEL_DRIVING, 0x28, 0x08);
|
|
mipi_dbi_command(dbi, DB7430_SOURCE_CONTROL,
|
|
0x01, 0x30, 0x15, 0x05, 0x22);
|
|
mipi_dbi_command(dbi, DB7430_GATE_INTERFACE,
|
|
0x10, 0x01, 0x00);
|
|
mipi_dbi_command(dbi, DB7430_DISPLAY_H_TIMING,
|
|
0x06, 0x55, 0x03, 0x07, 0x0b,
|
|
0x33, 0x00, 0x01, 0x03);
|
|
/*
|
|
* 0x00 in datasheet 0x01 in vendor code 0x00, it seems 0x01 means
|
|
* DE active high and 0x00 means DE active low.
|
|
*/
|
|
mipi_dbi_command(dbi, DB7430_RGB_SYNC_OPTION, 0x01);
|
|
mipi_dbi_command(dbi, DB7430_GAMMA_SET_RED,
|
|
/* R positive gamma */ 0x00,
|
|
0x0A, 0x31, 0x3B, 0x4E, 0x58, 0x59, 0x5B, 0x58, 0x5E, 0x62,
|
|
0x60, 0x61, 0x5E, 0x62, 0x55, 0x55, 0x7F, 0x08,
|
|
/* R negative gamma */ 0x00,
|
|
0x0A, 0x31, 0x3B, 0x4E, 0x58, 0x59, 0x5B, 0x58, 0x5E, 0x62,
|
|
0x60, 0x61, 0x5E, 0x62, 0x55, 0x55, 0x7F, 0x08);
|
|
mipi_dbi_command(dbi, DB7430_GAMMA_SET_GREEN,
|
|
/* G positive gamma */ 0x00,
|
|
0x25, 0x15, 0x28, 0x3D, 0x4A, 0x48, 0x4C, 0x4A, 0x52, 0x59,
|
|
0x59, 0x5B, 0x56, 0x60, 0x5D, 0x55, 0x7F, 0x0A,
|
|
/* G negative gamma */ 0x00,
|
|
0x25, 0x15, 0x28, 0x3D, 0x4A, 0x48, 0x4C, 0x4A, 0x52, 0x59,
|
|
0x59, 0x5B, 0x56, 0x60, 0x5D, 0x55, 0x7F, 0x0A);
|
|
mipi_dbi_command(dbi, DB7430_GAMMA_SET_BLUE,
|
|
/* B positive gamma */ 0x00,
|
|
0x48, 0x10, 0x1F, 0x2F, 0x35, 0x38, 0x3D, 0x3C, 0x45, 0x4D,
|
|
0x4E, 0x52, 0x51, 0x60, 0x7F, 0x7E, 0x7F, 0x0C,
|
|
/* B negative gamma */ 0x00,
|
|
0x48, 0x10, 0x1F, 0x2F, 0x35, 0x38, 0x3D, 0x3C, 0x45, 0x4D,
|
|
0x4E, 0x52, 0x51, 0x60, 0x7F, 0x7E, 0x7F, 0x0C);
|
|
mipi_dbi_command(dbi, DB7430_BIAS_CURRENT_CTRL, 0x33, 0x13);
|
|
mipi_dbi_command(dbi, DB7430_DDV_CTRL, 0x11, 0x00, 0x00);
|
|
mipi_dbi_command(dbi, DB7430_GAMMA_CTRL_REF, 0x50, 0x50);
|
|
mipi_dbi_command(dbi, DB7430_DCDC_CTRL, 0x2f, 0x11, 0x1e, 0x46);
|
|
mipi_dbi_command(dbi, DB7430_VCL_CTRL, 0x11, 0x0a);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int db7430_power_off(struct db7430 *db)
|
|
{
|
|
/* Go into RESET and disable regulators */
|
|
gpiod_set_value_cansleep(db->reset, 1);
|
|
return regulator_bulk_disable(ARRAY_SIZE(db->regulators),
|
|
db->regulators);
|
|
}
|
|
|
|
static int db7430_unprepare(struct drm_panel *panel)
|
|
{
|
|
return db7430_power_off(to_db7430(panel));
|
|
}
|
|
|
|
static int db7430_disable(struct drm_panel *panel)
|
|
{
|
|
struct db7430 *db = to_db7430(panel);
|
|
struct mipi_dbi *dbi = &db->dbi;
|
|
|
|
mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_OFF);
|
|
msleep(25);
|
|
mipi_dbi_command(dbi, MIPI_DCS_ENTER_SLEEP_MODE);
|
|
msleep(120);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int db7430_prepare(struct drm_panel *panel)
|
|
{
|
|
return db7430_power_on(to_db7430(panel));
|
|
}
|
|
|
|
static int db7430_enable(struct drm_panel *panel)
|
|
{
|
|
struct db7430 *db = to_db7430(panel);
|
|
struct mipi_dbi *dbi = &db->dbi;
|
|
|
|
/* Exit sleep mode */
|
|
mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE);
|
|
msleep(20);
|
|
|
|
/* NVM (non-volatile memory) load sequence */
|
|
mipi_dbi_command(dbi, DB7430_UNKNOWN_D4, 0x52, 0x5e);
|
|
mipi_dbi_command(dbi, DB7430_UNKNOWN_F8, 0x01, 0xf5, 0xf2, 0x71, 0x44);
|
|
mipi_dbi_command(dbi, DB7430_UNKNOWN_FC, 0x00, 0x08);
|
|
msleep(150);
|
|
|
|
/* CABC turn on sequence (BC = backlight control) */
|
|
mipi_dbi_command(dbi, DB7430_UNKNOWN_B4, 0x0f, 0x00, 0x50);
|
|
mipi_dbi_command(dbi, DB7430_USER_SELECT, 0x80);
|
|
mipi_dbi_command(dbi, DB7430_UNKNOWN_B7, 0x24);
|
|
mipi_dbi_command(dbi, DB7430_UNKNOWN_B8, 0x01);
|
|
|
|
/* Turn on display */
|
|
mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* db7430_get_modes() - return the mode
|
|
* @panel: the panel to get the mode for
|
|
* @connector: reference to the central DRM connector control structure
|
|
*/
|
|
static int db7430_get_modes(struct drm_panel *panel,
|
|
struct drm_connector *connector)
|
|
{
|
|
struct db7430 *db = to_db7430(panel);
|
|
struct drm_display_mode *mode;
|
|
static const u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
|
|
|
|
mode = drm_mode_duplicate(connector->dev, &db7430_480_800_mode);
|
|
if (!mode) {
|
|
dev_err(db->dev, "failed to add mode\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
connector->display_info.bpc = 8;
|
|
connector->display_info.width_mm = mode->width_mm;
|
|
connector->display_info.height_mm = mode->height_mm;
|
|
connector->display_info.bus_flags =
|
|
DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE;
|
|
drm_display_info_set_bus_formats(&connector->display_info,
|
|
&bus_format, 1);
|
|
|
|
drm_mode_set_name(mode);
|
|
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
|
|
|
|
drm_mode_probed_add(connector, mode);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static const struct drm_panel_funcs db7430_drm_funcs = {
|
|
.disable = db7430_disable,
|
|
.unprepare = db7430_unprepare,
|
|
.prepare = db7430_prepare,
|
|
.enable = db7430_enable,
|
|
.get_modes = db7430_get_modes,
|
|
};
|
|
|
|
static int db7430_probe(struct spi_device *spi)
|
|
{
|
|
struct device *dev = &spi->dev;
|
|
struct db7430 *db;
|
|
int ret;
|
|
|
|
db = devm_kzalloc(dev, sizeof(*db), GFP_KERNEL);
|
|
if (!db)
|
|
return -ENOMEM;
|
|
db->dev = dev;
|
|
|
|
/*
|
|
* VCI is the analog voltage supply
|
|
* VCCIO is the digital I/O voltage supply
|
|
*/
|
|
db->regulators[0].supply = "vci";
|
|
db->regulators[1].supply = "vccio";
|
|
ret = devm_regulator_bulk_get(dev,
|
|
ARRAY_SIZE(db->regulators),
|
|
db->regulators);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "failed to get regulators\n");
|
|
|
|
db->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(db->reset)) {
|
|
ret = PTR_ERR(db->reset);
|
|
return dev_err_probe(dev, ret, "no RESET GPIO\n");
|
|
}
|
|
|
|
ret = mipi_dbi_spi_init(spi, &db->dbi, NULL);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "MIPI DBI init failed\n");
|
|
|
|
drm_panel_init(&db->panel, dev, &db7430_drm_funcs,
|
|
DRM_MODE_CONNECTOR_DPI);
|
|
|
|
/* FIXME: if no external backlight, use internal backlight */
|
|
ret = drm_panel_of_backlight(&db->panel);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "failed to add backlight\n");
|
|
|
|
spi_set_drvdata(spi, db);
|
|
|
|
drm_panel_add(&db->panel);
|
|
dev_dbg(dev, "added panel\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void db7430_remove(struct spi_device *spi)
|
|
{
|
|
struct db7430 *db = spi_get_drvdata(spi);
|
|
|
|
drm_panel_remove(&db->panel);
|
|
}
|
|
|
|
/*
|
|
* The DB7430 display controller may be used in several display products,
|
|
* so list the different variants here and add per-variant data if needed.
|
|
*/
|
|
static const struct of_device_id db7430_match[] = {
|
|
{ .compatible = "samsung,lms397kf04", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, db7430_match);
|
|
|
|
static struct spi_driver db7430_driver = {
|
|
.probe = db7430_probe,
|
|
.remove = db7430_remove,
|
|
.driver = {
|
|
.name = "db7430-panel",
|
|
.of_match_table = db7430_match,
|
|
},
|
|
};
|
|
module_spi_driver(db7430_driver);
|
|
|
|
MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
|
|
MODULE_DESCRIPTION("Samsung DB7430 panel driver");
|
|
MODULE_LICENSE("GPL v2");
|