linux/linux-5.18.11/arch/arm/boot/dts/omap3-evm-37xx.dts

108 lines
2.5 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
*/
/dts-v1/;
#include "omap36xx.dtsi"
#include "omap3-evm-common.dtsi"
#include "omap3-evm-processor-common.dtsi"
/ {
model = "TI OMAP37XX EVM (TMDSEVM3730)";
compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3";
};
&omap3_pmx_core2 {
pinctrl-names = "default";
pinctrl-0 = <&hsusb2_2_pins>;
ehci_phy_pins: pinmux_ehci_phy_pins {
pinctrl-single,pins = <
/* EHCI PHY reset GPIO etk_d7.gpio_21 */
OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)
/* EHCI VBUS etk_d8.gpio_22 */
OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)
>;
};
/* Used by OHCI and EHCI. OHCI won't work without external phy */
hsusb2_2_pins: pinmux_hsusb2_2_pins {
pinctrl-single,pins = <
/* etk_d10.hsusb2_clk */
OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)
/* etk_d11.hsusb2_stp */
OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)
/* etk_d12.hsusb2_dir */
OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)
/* etk_d13.hsusb2_nxt */
OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)
/* etk_d14.hsusb2_data0 */
OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)
/* etk_d15.hsusb2_data1 */
OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)
>;
};
};
&gpmc {
nand@0,0 {
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
linux,mtd-name= "hynix,h8kds0un0mer-4em";
nand-bus-width = <16>;
gpmc,device-width = <2>;
ti,nand-ecc-opt = "bch8";
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <44>;
gpmc,cs-wr-off-ns = <44>;
gpmc,adv-on-ns = <6>;
gpmc,adv-rd-off-ns = <34>;
gpmc,adv-wr-off-ns = <44>;
gpmc,we-off-ns = <40>;
gpmc,oe-off-ns = <54>;
gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "X-Loader";
reg = <0 0x80000>;
};
partition@80000 {
label = "U-Boot";
reg = <0x80000 0x1c0000>;
};
partition@1c0000 {
label = "Environment";
reg = <0x240000 0x40000>;
};
partition@280000 {
label = "Kernel";
reg = <0x280000 0x500000>;
};
partition@780000 {
label = "Filesystem";
reg = <0x780000 0x1f880000>;
};
};
};