393 lines
8.3 KiB
Plaintext
393 lines
8.3 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
/*
|
|
* Copyright (c) 2014 Protonic Holland
|
|
* Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include "imx6dl.dtsi"
|
|
|
|
/ {
|
|
model = "Plymovent BAS board";
|
|
compatible = "ply,plybas", "fsl,imx6dl";
|
|
|
|
chosen {
|
|
stdout-path = &uart4;
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
autorepeat;
|
|
|
|
button-start {
|
|
label = "START";
|
|
linux,code = <31>;
|
|
gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
button-clean {
|
|
label = "CLEAN";
|
|
linux,code = <46>;
|
|
gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_leds>;
|
|
|
|
led-0 {
|
|
label = "debug0";
|
|
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
led-1 {
|
|
label = "debug1";
|
|
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
led-2 {
|
|
label = "light_tower1";
|
|
gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
|
|
led-3 {
|
|
label = "light_tower2";
|
|
gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
led-4 {
|
|
label = "light_tower3";
|
|
gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
led-5 {
|
|
label = "light_tower4";
|
|
gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
clk50m_phy: phy-clock {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <50000000>;
|
|
};
|
|
|
|
reg_5v0: regulator-5v0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "5v0";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
};
|
|
|
|
&can1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_can1>;
|
|
xceiver-supply = <®_5v0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&can2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_can2>;
|
|
xceiver-supply = <®_5v0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ecspi1 {
|
|
cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ecspi1>;
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <20000000>;
|
|
};
|
|
};
|
|
|
|
&fec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet>;
|
|
phy-mode = "rmii";
|
|
clocks = <&clks IMX6QDL_CLK_ENET>,
|
|
<&clks IMX6QDL_CLK_ENET>,
|
|
<&clk50m_phy>;
|
|
clock-names = "ipg", "ahb", "ptp";
|
|
phy-handle = <&rgmii_phy>;
|
|
status = "okay";
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* Microchip KSZ8081RNA PHY */
|
|
rgmii_phy: ethernet-phy@0 {
|
|
reg = <0>;
|
|
interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
|
|
reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
|
|
reset-assert-us = <10000>;
|
|
reset-deassert-us = <300>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&gpio1 {
|
|
gpio-line-names =
|
|
"", "SD1_CD", "", "", "", "", "", "",
|
|
"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "";
|
|
};
|
|
|
|
&gpio3 {
|
|
gpio-line-names =
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "ECSPI1_SS1", "", "USB_EXT_PWR", "", "",
|
|
"", "", "", "", "", "", "", "";
|
|
};
|
|
|
|
&gpio4 {
|
|
gpio-line-names =
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "", "CAN1_SR", "CAN2_SR", "", "",
|
|
"LED_DI0_DEBUG_0", "LED_DI0_DEBUG_1", "IMX6_IN12", "IMX6_HMI",
|
|
"IMX6_IN11", "IMX6_BUZZER", "IMX6_LED1", "IMX6_LED2",
|
|
"IMX6_LED3", "IMX6_LED4", "ETH_RESET", "IMX6_ANA_OUT_SD",
|
|
"IMX6_ANA_OUT_ERR", "IMX6_ANA_OUT", "ETH_INTRP", "";
|
|
};
|
|
|
|
&gpio5 {
|
|
gpio-line-names =
|
|
"", "", "", "", "", "IMX6_RELAY1", "IMX6_RELAY2", "",
|
|
"IMX6_IN1", "IMX6_IN2", "IMX6_IN3", "IMX6_IN4", "IMX6_IN5",
|
|
"IMX6_IN6", "IMX6_IN7", "IMX6_IN8",
|
|
"IMX6_IN9", "IMX6_IN10", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "";
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
/* additional i2c devices are added automatically by the boot loader */
|
|
};
|
|
|
|
&i2c3 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
status = "okay";
|
|
|
|
temperature-sensor@70 {
|
|
compatible = "ti,tmp103";
|
|
reg = <0x70>;
|
|
};
|
|
|
|
rtc@51 {
|
|
compatible = "nxp,pcf8563";
|
|
reg = <0x51>;
|
|
};
|
|
};
|
|
|
|
&pwm1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
fsl,uart-has-rtscts;
|
|
linux,rs485-enabled-at-boot-time;
|
|
rs485-rts-delay = <0 20>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbotg>;
|
|
phy_type = "utmi";
|
|
dr_mode = "host";
|
|
disable-over-current;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphynop1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&usbphynop2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl_can1: can1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000
|
|
MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008
|
|
/* CAN1_SR */
|
|
MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008
|
|
>;
|
|
};
|
|
|
|
pinctrl_can2: can2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000
|
|
MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008
|
|
/* CAN2_SR */
|
|
MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13008
|
|
>;
|
|
};
|
|
|
|
pinctrl_ecspi1: ecspi1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x1b000
|
|
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x3008
|
|
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x3008
|
|
/* CS */
|
|
MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x3008
|
|
>;
|
|
};
|
|
|
|
pinctrl_enet: enetgrp {
|
|
fsl,pins = <
|
|
/* MX6QDL_ENET_PINGRP4 */
|
|
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
|
|
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
|
|
MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
|
|
MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
|
|
MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
|
|
MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
|
|
MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
|
|
MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
|
|
MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
|
|
|
|
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
|
|
/* Phy reset */
|
|
MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
|
|
/* nINTRP */
|
|
MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1
|
|
MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c3: i2c3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
|
|
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_leds: ledsgrp {
|
|
fsl,pins = <
|
|
/* DEBUG_0 */
|
|
MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
|
|
/* DEBUG_1 */
|
|
MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
|
|
|
|
/* LED1 (lighttower) */
|
|
MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22 0x13070
|
|
/* LED2 (lighttower) */
|
|
MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23 0x13070
|
|
/* LED3 (lighttower) */
|
|
MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x13070
|
|
/* LED4 (lighttower) */
|
|
MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x13070
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm1: pwm1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
/* YaCO AUX Uart */
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
|
|
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
|
|
MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
|
|
MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x130b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart4: uart4grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
|
|
MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbotg: usbotggrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
|
|
/* power enable, high active */
|
|
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1: usdhc1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9
|
|
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9
|
|
MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
|
|
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
|
|
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
|
|
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
|
|
MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099
|
|
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099
|
|
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099
|
|
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099
|
|
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099
|
|
MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1
|
|
>;
|
|
};
|
|
};
|