1160 lines
25 KiB
Plaintext
1160 lines
25 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
#include "bcm283x.dtsi"
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/soc/bcm2835-pm.h>
|
|
|
|
/ {
|
|
compatible = "brcm,bcm2711";
|
|
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
|
|
interrupt-parent = <&gicv2>;
|
|
|
|
vc4: gpu {
|
|
compatible = "brcm,bcm2711-vc5";
|
|
status = "disabled";
|
|
};
|
|
|
|
clk_27MHz: clk-27M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <27000000>;
|
|
clock-output-names = "27MHz-clock";
|
|
};
|
|
|
|
clk_108MHz: clk-108M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <108000000>;
|
|
clock-output-names = "108MHz-clock";
|
|
};
|
|
|
|
soc {
|
|
/*
|
|
* Defined ranges:
|
|
* Common BCM283x peripherals
|
|
* BCM2711-specific peripherals
|
|
* ARM-local peripherals
|
|
*/
|
|
ranges = <0x7e000000 0x0 0xfe000000 0x01800000>,
|
|
<0x7c000000 0x0 0xfc000000 0x02000000>,
|
|
<0x40000000 0x0 0xff800000 0x00800000>;
|
|
/* Emulate a contiguous 30-bit address range for DMA */
|
|
dma-ranges = <0xc0000000 0x0 0x00000000 0x40000000>;
|
|
|
|
/*
|
|
* This node is the provider for the enable-method for
|
|
* bringing up secondary cores.
|
|
*/
|
|
local_intc: local_intc@40000000 {
|
|
compatible = "brcm,bcm2836-l1-intc";
|
|
reg = <0x40000000 0x100>;
|
|
};
|
|
|
|
gicv2: interrupt-controller@40041000 {
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
compatible = "arm,gic-400";
|
|
reg = <0x40041000 0x1000>,
|
|
<0x40042000 0x2000>,
|
|
<0x40044000 0x2000>,
|
|
<0x40046000 0x2000>;
|
|
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
|
|
IRQ_TYPE_LEVEL_HIGH)>;
|
|
};
|
|
|
|
avs_monitor: avs-monitor@7d5d2000 {
|
|
compatible = "brcm,bcm2711-avs-monitor",
|
|
"syscon", "simple-mfd";
|
|
reg = <0x7d5d2000 0xf00>;
|
|
|
|
thermal: thermal {
|
|
compatible = "brcm,bcm2711-thermal";
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
};
|
|
|
|
dma: dma@7e007000 {
|
|
compatible = "brcm,bcm2835-dma";
|
|
reg = <0x7e007000 0xb00>;
|
|
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
|
|
/* DMA lite 7 - 10 */
|
|
<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "dma0",
|
|
"dma1",
|
|
"dma2",
|
|
"dma3",
|
|
"dma4",
|
|
"dma5",
|
|
"dma6",
|
|
"dma7",
|
|
"dma8",
|
|
"dma9",
|
|
"dma10";
|
|
#dma-cells = <1>;
|
|
brcm,dma-channel-mask = <0x07f5>;
|
|
};
|
|
|
|
pm: watchdog@7e100000 {
|
|
compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
|
|
#power-domain-cells = <1>;
|
|
#reset-cells = <1>;
|
|
reg = <0x7e100000 0x114>,
|
|
<0x7e00a000 0x24>,
|
|
<0x7ec11000 0x20>;
|
|
clocks = <&clocks BCM2835_CLOCK_V3D>,
|
|
<&clocks BCM2835_CLOCK_PERI_IMAGE>,
|
|
<&clocks BCM2835_CLOCK_H264>,
|
|
<&clocks BCM2835_CLOCK_ISP>;
|
|
clock-names = "v3d", "peri_image", "h264", "isp";
|
|
system-power-controller;
|
|
};
|
|
|
|
rng@7e104000 {
|
|
compatible = "brcm,bcm2711-rng200";
|
|
reg = <0x7e104000 0x28>;
|
|
};
|
|
|
|
uart2: serial@7e201400 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x7e201400 0x200>;
|
|
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clocks BCM2835_CLOCK_UART>,
|
|
<&clocks BCM2835_CLOCK_VPU>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
arm,primecell-periphid = <0x00241011>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@7e201600 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x7e201600 0x200>;
|
|
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clocks BCM2835_CLOCK_UART>,
|
|
<&clocks BCM2835_CLOCK_VPU>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
arm,primecell-periphid = <0x00241011>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@7e201800 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x7e201800 0x200>;
|
|
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clocks BCM2835_CLOCK_UART>,
|
|
<&clocks BCM2835_CLOCK_VPU>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
arm,primecell-periphid = <0x00241011>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart5: serial@7e201a00 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x7e201a00 0x200>;
|
|
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clocks BCM2835_CLOCK_UART>,
|
|
<&clocks BCM2835_CLOCK_VPU>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
arm,primecell-periphid = <0x00241011>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi3: spi@7e204600 {
|
|
compatible = "brcm,bcm2835-spi";
|
|
reg = <0x7e204600 0x0200>;
|
|
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clocks BCM2835_CLOCK_VPU>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi4: spi@7e204800 {
|
|
compatible = "brcm,bcm2835-spi";
|
|
reg = <0x7e204800 0x0200>;
|
|
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clocks BCM2835_CLOCK_VPU>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi5: spi@7e204a00 {
|
|
compatible = "brcm,bcm2835-spi";
|
|
reg = <0x7e204a00 0x0200>;
|
|
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clocks BCM2835_CLOCK_VPU>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi6: spi@7e204c00 {
|
|
compatible = "brcm,bcm2835-spi";
|
|
reg = <0x7e204c00 0x0200>;
|
|
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clocks BCM2835_CLOCK_VPU>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@7e205600 {
|
|
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
|
|
reg = <0x7e205600 0x200>;
|
|
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clocks BCM2835_CLOCK_VPU>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@7e205800 {
|
|
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
|
|
reg = <0x7e205800 0x200>;
|
|
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clocks BCM2835_CLOCK_VPU>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c5: i2c@7e205a00 {
|
|
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
|
|
reg = <0x7e205a00 0x200>;
|
|
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clocks BCM2835_CLOCK_VPU>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c6: i2c@7e205c00 {
|
|
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
|
|
reg = <0x7e205c00 0x200>;
|
|
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clocks BCM2835_CLOCK_VPU>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pixelvalve0: pixelvalve@7e206000 {
|
|
compatible = "brcm,bcm2711-pixelvalve0";
|
|
reg = <0x7e206000 0x100>;
|
|
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pixelvalve1: pixelvalve@7e207000 {
|
|
compatible = "brcm,bcm2711-pixelvalve1";
|
|
reg = <0x7e207000 0x100>;
|
|
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pixelvalve2: pixelvalve@7e20a000 {
|
|
compatible = "brcm,bcm2711-pixelvalve2";
|
|
reg = <0x7e20a000 0x100>;
|
|
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm1: pwm@7e20c800 {
|
|
compatible = "brcm,bcm2835-pwm";
|
|
reg = <0x7e20c800 0x28>;
|
|
clocks = <&clocks BCM2835_CLOCK_PWM>;
|
|
assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
|
|
assigned-clock-rates = <10000000>;
|
|
#pwm-cells = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pixelvalve4: pixelvalve@7e216000 {
|
|
compatible = "brcm,bcm2711-pixelvalve4";
|
|
reg = <0x7e216000 0x100>;
|
|
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hvs: hvs@7e400000 {
|
|
compatible = "brcm,bcm2711-hvs";
|
|
reg = <0x7e400000 0x8000>;
|
|
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
pixelvalve3: pixelvalve@7ec12000 {
|
|
compatible = "brcm,bcm2711-pixelvalve3";
|
|
reg = <0x7ec12000 0x100>;
|
|
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
vec: vec@7ec13000 {
|
|
compatible = "brcm,bcm2711-vec";
|
|
reg = <0x7ec13000 0x1000>;
|
|
clocks = <&clocks BCM2835_CLOCK_VEC>;
|
|
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
dvp: clock@7ef00000 {
|
|
compatible = "brcm,brcm2711-dvp";
|
|
reg = <0x7ef00000 0x10>;
|
|
clocks = <&clk_108MHz>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
aon_intr: interrupt-controller@7ef00100 {
|
|
compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
|
|
reg = <0x7ef00100 0x30>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
|
|
hdmi0: hdmi@7ef00700 {
|
|
compatible = "brcm,bcm2711-hdmi0";
|
|
reg = <0x7ef00700 0x300>,
|
|
<0x7ef00300 0x200>,
|
|
<0x7ef00f00 0x80>,
|
|
<0x7ef00f80 0x80>,
|
|
<0x7ef01b00 0x200>,
|
|
<0x7ef01f00 0x400>,
|
|
<0x7ef00200 0x80>,
|
|
<0x7ef04300 0x100>,
|
|
<0x7ef20000 0x100>;
|
|
reg-names = "hdmi",
|
|
"dvp",
|
|
"phy",
|
|
"rm",
|
|
"packet",
|
|
"metadata",
|
|
"csc",
|
|
"cec",
|
|
"hd";
|
|
clock-names = "hdmi", "bvb", "audio", "cec";
|
|
resets = <&dvp 0>;
|
|
interrupt-parent = <&aon_intr>;
|
|
interrupts = <0>, <1>, <2>,
|
|
<3>, <4>, <5>;
|
|
interrupt-names = "cec-tx", "cec-rx", "cec-low",
|
|
"wakeup", "hpd-connected", "hpd-removed";
|
|
ddc = <&ddc0>;
|
|
dmas = <&dma 10>;
|
|
dma-names = "audio-rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
ddc0: i2c@7ef04500 {
|
|
compatible = "brcm,bcm2711-hdmi-i2c";
|
|
reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
|
|
reg-names = "bsc", "auto-i2c";
|
|
clock-frequency = <97500>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hdmi1: hdmi@7ef05700 {
|
|
compatible = "brcm,bcm2711-hdmi1";
|
|
reg = <0x7ef05700 0x300>,
|
|
<0x7ef05300 0x200>,
|
|
<0x7ef05f00 0x80>,
|
|
<0x7ef05f80 0x80>,
|
|
<0x7ef06b00 0x200>,
|
|
<0x7ef06f00 0x400>,
|
|
<0x7ef00280 0x80>,
|
|
<0x7ef09300 0x100>,
|
|
<0x7ef20000 0x100>;
|
|
reg-names = "hdmi",
|
|
"dvp",
|
|
"phy",
|
|
"rm",
|
|
"packet",
|
|
"metadata",
|
|
"csc",
|
|
"cec",
|
|
"hd";
|
|
ddc = <&ddc1>;
|
|
clock-names = "hdmi", "bvb", "audio", "cec";
|
|
resets = <&dvp 1>;
|
|
interrupt-parent = <&aon_intr>;
|
|
interrupts = <8>, <7>, <6>,
|
|
<9>, <10>, <11>;
|
|
interrupt-names = "cec-tx", "cec-rx", "cec-low",
|
|
"wakeup", "hpd-connected", "hpd-removed";
|
|
dmas = <&dma 17>;
|
|
dma-names = "audio-rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
ddc1: i2c@7ef09500 {
|
|
compatible = "brcm,bcm2711-hdmi-i2c";
|
|
reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
|
|
reg-names = "bsc", "auto-i2c";
|
|
clock-frequency = <97500>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
/*
|
|
* emmc2 has different DMA constraints based on SoC revisions. It was
|
|
* moved into its own bus, so as for RPi4's firmware to update them.
|
|
* The firmware will find whether the emmc2bus alias is defined, and if
|
|
* so, it'll edit the dma-ranges property below accordingly.
|
|
*/
|
|
emmc2bus: emmc2bus {
|
|
compatible = "simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
|
|
ranges = <0x0 0x7e000000 0x0 0xfe000000 0x01800000>;
|
|
dma-ranges = <0x0 0xc0000000 0x0 0x00000000 0x40000000>;
|
|
|
|
emmc2: mmc@7e340000 {
|
|
compatible = "brcm,bcm2711-emmc2";
|
|
reg = <0x0 0x7e340000 0x100>;
|
|
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clocks BCM2711_CLOCK_EMMC2>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
arm-pmu {
|
|
compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3";
|
|
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
|
|
IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
|
|
IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
|
|
IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
|
|
IRQ_TYPE_LEVEL_LOW)>;
|
|
/* This only applies to the ARMv7 stub */
|
|
arm,cpu-registers-not-fw-configured;
|
|
};
|
|
|
|
cpus: cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
|
|
|
|
/* Source for d/i-cache-line-size and d/i-cache-sets
|
|
* https://developer.arm.com/documentation/100095/0003
|
|
* /Level-1-Memory-System/About-the-L1-memory-system?lang=en
|
|
* Source for d/i-cache-size
|
|
* https://www.raspberrypi.com/documentation/computers
|
|
* /processors.html#bcm2711
|
|
*/
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a72";
|
|
reg = <0>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0x0 0x000000d8>;
|
|
d-cache-size = <0x8000>;
|
|
d-cache-line-size = <64>;
|
|
d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
|
|
i-cache-size = <0xc000>;
|
|
i-cache-line-size = <64>;
|
|
i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
|
|
next-level-cache = <&l2>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a72";
|
|
reg = <1>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0x0 0x000000e0>;
|
|
d-cache-size = <0x8000>;
|
|
d-cache-line-size = <64>;
|
|
d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
|
|
i-cache-size = <0xc000>;
|
|
i-cache-line-size = <64>;
|
|
i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
|
|
next-level-cache = <&l2>;
|
|
};
|
|
|
|
cpu2: cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a72";
|
|
reg = <2>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0x0 0x000000e8>;
|
|
d-cache-size = <0x8000>;
|
|
d-cache-line-size = <64>;
|
|
d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
|
|
i-cache-size = <0xc000>;
|
|
i-cache-line-size = <64>;
|
|
i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
|
|
next-level-cache = <&l2>;
|
|
};
|
|
|
|
cpu3: cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a72";
|
|
reg = <3>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0x0 0x000000f0>;
|
|
d-cache-size = <0x8000>;
|
|
d-cache-line-size = <64>;
|
|
d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
|
|
i-cache-size = <0xc000>;
|
|
i-cache-line-size = <64>;
|
|
i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
|
|
next-level-cache = <&l2>;
|
|
};
|
|
|
|
/* Source for d/i-cache-line-size and d/i-cache-sets
|
|
* https://developer.arm.com/documentation/100095/0003
|
|
* /Level-2-Memory-System/About-the-L2-memory-system?lang=en
|
|
* Source for d/i-cache-size
|
|
* https://www.raspberrypi.com/documentation/computers
|
|
* /processors.html#bcm2711
|
|
*/
|
|
l2: l2-cache0 {
|
|
compatible = "cache";
|
|
cache-size = <0x100000>;
|
|
cache-line-size = <64>;
|
|
cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
|
|
cache-level = <2>;
|
|
};
|
|
};
|
|
|
|
scb {
|
|
compatible = "simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
|
|
ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>,
|
|
<0x6 0x00000000 0x6 0x00000000 0x40000000>;
|
|
|
|
pcie0: pcie@7d500000 {
|
|
compatible = "brcm,bcm2711-pcie";
|
|
reg = <0x0 0x7d500000 0x9310>;
|
|
device_type = "pci";
|
|
#address-cells = <3>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "pcie", "msi";
|
|
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
|
interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
|
|
IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 0 0 2 &gicv2 GIC_SPI 144
|
|
IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 0 0 3 &gicv2 GIC_SPI 145
|
|
IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 0 0 4 &gicv2 GIC_SPI 146
|
|
IRQ_TYPE_LEVEL_HIGH>;
|
|
msi-controller;
|
|
msi-parent = <&pcie0>;
|
|
|
|
ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
|
|
0x0 0x04000000>;
|
|
/*
|
|
* The wrapper around the PCIe block has a bug
|
|
* preventing it from accessing beyond the first 3GB of
|
|
* memory.
|
|
*/
|
|
dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
|
|
0x0 0xc0000000>;
|
|
brcm,enable-ssc;
|
|
};
|
|
|
|
genet: ethernet@7d580000 {
|
|
compatible = "brcm,bcm2711-genet-v5";
|
|
reg = <0x0 0x7d580000 0x10000>;
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x1>;
|
|
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
|
|
genet_mdio: mdio@e14 {
|
|
compatible = "brcm,genet-mdio-v5";
|
|
reg = <0xe14 0x8>;
|
|
reg-names = "mdio";
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&clk_osc {
|
|
clock-frequency = <54000000>;
|
|
};
|
|
|
|
&clocks {
|
|
compatible = "brcm,bcm2711-cprman";
|
|
};
|
|
|
|
&cpu_thermal {
|
|
coefficients = <(-487) 410040>;
|
|
thermal-sensors = <&thermal>;
|
|
};
|
|
|
|
&dsi0 {
|
|
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
&dsi1 {
|
|
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
|
|
compatible = "brcm,bcm2711-dsi1";
|
|
};
|
|
|
|
&gpio {
|
|
compatible = "brcm,bcm2711-gpio";
|
|
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
gpio-ranges = <&gpio 0 0 58>;
|
|
|
|
gpclk0_gpio49: gpclk0_gpio49 {
|
|
pin-gpclk {
|
|
pins = "gpio49";
|
|
function = "alt1";
|
|
bias-disable;
|
|
};
|
|
};
|
|
gpclk1_gpio50: gpclk1_gpio50 {
|
|
pin-gpclk {
|
|
pins = "gpio50";
|
|
function = "alt1";
|
|
bias-disable;
|
|
};
|
|
};
|
|
gpclk2_gpio51: gpclk2_gpio51 {
|
|
pin-gpclk {
|
|
pins = "gpio51";
|
|
function = "alt1";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2c0_gpio46: i2c0_gpio46 {
|
|
pin-sda {
|
|
function = "alt0";
|
|
pins = "gpio46";
|
|
bias-pull-up;
|
|
};
|
|
pin-scl {
|
|
function = "alt0";
|
|
pins = "gpio47";
|
|
bias-disable;
|
|
};
|
|
};
|
|
i2c1_gpio46: i2c1_gpio46 {
|
|
pin-sda {
|
|
function = "alt1";
|
|
pins = "gpio46";
|
|
bias-pull-up;
|
|
};
|
|
pin-scl {
|
|
function = "alt1";
|
|
pins = "gpio47";
|
|
bias-disable;
|
|
};
|
|
};
|
|
i2c3_gpio2: i2c3_gpio2 {
|
|
pin-sda {
|
|
function = "alt5";
|
|
pins = "gpio2";
|
|
bias-pull-up;
|
|
};
|
|
pin-scl {
|
|
function = "alt5";
|
|
pins = "gpio3";
|
|
bias-disable;
|
|
};
|
|
};
|
|
i2c3_gpio4: i2c3_gpio4 {
|
|
pin-sda {
|
|
function = "alt5";
|
|
pins = "gpio4";
|
|
bias-pull-up;
|
|
};
|
|
pin-scl {
|
|
function = "alt5";
|
|
pins = "gpio5";
|
|
bias-disable;
|
|
};
|
|
};
|
|
i2c4_gpio6: i2c4_gpio6 {
|
|
pin-sda {
|
|
function = "alt5";
|
|
pins = "gpio6";
|
|
bias-pull-up;
|
|
};
|
|
pin-scl {
|
|
function = "alt5";
|
|
pins = "gpio7";
|
|
bias-disable;
|
|
};
|
|
};
|
|
i2c4_gpio8: i2c4_gpio8 {
|
|
pin-sda {
|
|
function = "alt5";
|
|
pins = "gpio8";
|
|
bias-pull-up;
|
|
};
|
|
pin-scl {
|
|
function = "alt5";
|
|
pins = "gpio9";
|
|
bias-disable;
|
|
};
|
|
};
|
|
i2c5_gpio10: i2c5_gpio10 {
|
|
pin-sda {
|
|
function = "alt5";
|
|
pins = "gpio10";
|
|
bias-pull-up;
|
|
};
|
|
pin-scl {
|
|
function = "alt5";
|
|
pins = "gpio11";
|
|
bias-disable;
|
|
};
|
|
};
|
|
i2c5_gpio12: i2c5_gpio12 {
|
|
pin-sda {
|
|
function = "alt5";
|
|
pins = "gpio12";
|
|
bias-pull-up;
|
|
};
|
|
pin-scl {
|
|
function = "alt5";
|
|
pins = "gpio13";
|
|
bias-disable;
|
|
};
|
|
};
|
|
i2c6_gpio0: i2c6_gpio0 {
|
|
pin-sda {
|
|
function = "alt5";
|
|
pins = "gpio0";
|
|
bias-pull-up;
|
|
};
|
|
pin-scl {
|
|
function = "alt5";
|
|
pins = "gpio1";
|
|
bias-disable;
|
|
};
|
|
};
|
|
i2c6_gpio22: i2c6_gpio22 {
|
|
pin-sda {
|
|
function = "alt5";
|
|
pins = "gpio22";
|
|
bias-pull-up;
|
|
};
|
|
pin-scl {
|
|
function = "alt5";
|
|
pins = "gpio23";
|
|
bias-disable;
|
|
};
|
|
};
|
|
i2c_slave_gpio8: i2c_slave_gpio8 {
|
|
pins-i2c-slave {
|
|
pins = "gpio8",
|
|
"gpio9",
|
|
"gpio10",
|
|
"gpio11";
|
|
function = "alt3";
|
|
};
|
|
};
|
|
|
|
jtag_gpio48: jtag_gpio48 {
|
|
pins-jtag {
|
|
pins = "gpio48",
|
|
"gpio49",
|
|
"gpio50",
|
|
"gpio51",
|
|
"gpio52",
|
|
"gpio53";
|
|
function = "alt4";
|
|
};
|
|
};
|
|
|
|
mii_gpio28: mii_gpio28 {
|
|
pins-mii {
|
|
pins = "gpio28",
|
|
"gpio29",
|
|
"gpio30",
|
|
"gpio31";
|
|
function = "alt4";
|
|
};
|
|
};
|
|
mii_gpio36: mii_gpio36 {
|
|
pins-mii {
|
|
pins = "gpio36",
|
|
"gpio37",
|
|
"gpio38",
|
|
"gpio39";
|
|
function = "alt5";
|
|
};
|
|
};
|
|
|
|
pcm_gpio50: pcm_gpio50 {
|
|
pins-pcm {
|
|
pins = "gpio50",
|
|
"gpio51",
|
|
"gpio52",
|
|
"gpio53";
|
|
function = "alt2";
|
|
};
|
|
};
|
|
|
|
pwm0_0_gpio12: pwm0_0_gpio12 {
|
|
pin-pwm {
|
|
pins = "gpio12";
|
|
function = "alt0";
|
|
bias-disable;
|
|
};
|
|
};
|
|
pwm0_0_gpio18: pwm0_0_gpio18 {
|
|
pin-pwm {
|
|
pins = "gpio18";
|
|
function = "alt5";
|
|
bias-disable;
|
|
};
|
|
};
|
|
pwm1_0_gpio40: pwm1_0_gpio40 {
|
|
pin-pwm {
|
|
pins = "gpio40";
|
|
function = "alt0";
|
|
bias-disable;
|
|
};
|
|
};
|
|
pwm0_1_gpio13: pwm0_1_gpio13 {
|
|
pin-pwm {
|
|
pins = "gpio13";
|
|
function = "alt0";
|
|
bias-disable;
|
|
};
|
|
};
|
|
pwm0_1_gpio19: pwm0_1_gpio19 {
|
|
pin-pwm {
|
|
pins = "gpio19";
|
|
function = "alt5";
|
|
bias-disable;
|
|
};
|
|
};
|
|
pwm1_1_gpio41: pwm1_1_gpio41 {
|
|
pin-pwm {
|
|
pins = "gpio41";
|
|
function = "alt0";
|
|
bias-disable;
|
|
};
|
|
};
|
|
pwm0_1_gpio45: pwm0_1_gpio45 {
|
|
pin-pwm {
|
|
pins = "gpio45";
|
|
function = "alt0";
|
|
bias-disable;
|
|
};
|
|
};
|
|
pwm0_0_gpio52: pwm0_0_gpio52 {
|
|
pin-pwm {
|
|
pins = "gpio52";
|
|
function = "alt1";
|
|
bias-disable;
|
|
};
|
|
};
|
|
pwm0_1_gpio53: pwm0_1_gpio53 {
|
|
pin-pwm {
|
|
pins = "gpio53";
|
|
function = "alt1";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
rgmii_gpio35: rgmii_gpio35 {
|
|
pin-start-stop {
|
|
pins = "gpio35";
|
|
function = "alt4";
|
|
};
|
|
pin-rx-ok {
|
|
pins = "gpio36";
|
|
function = "alt4";
|
|
};
|
|
};
|
|
rgmii_irq_gpio34: rgmii_irq_gpio34 {
|
|
pin-irq {
|
|
pins = "gpio34";
|
|
function = "alt5";
|
|
};
|
|
};
|
|
rgmii_irq_gpio39: rgmii_irq_gpio39 {
|
|
pin-irq {
|
|
pins = "gpio39";
|
|
function = "alt4";
|
|
};
|
|
};
|
|
rgmii_mdio_gpio28: rgmii_mdio_gpio28 {
|
|
pins-mdio {
|
|
pins = "gpio28",
|
|
"gpio29";
|
|
function = "alt5";
|
|
};
|
|
};
|
|
rgmii_mdio_gpio37: rgmii_mdio_gpio37 {
|
|
pins-mdio {
|
|
pins = "gpio37",
|
|
"gpio38";
|
|
function = "alt4";
|
|
};
|
|
};
|
|
|
|
spi0_gpio46: spi0_gpio46 {
|
|
pins-spi {
|
|
pins = "gpio46",
|
|
"gpio47",
|
|
"gpio48",
|
|
"gpio49";
|
|
function = "alt2";
|
|
};
|
|
};
|
|
spi2_gpio46: spi2_gpio46 {
|
|
pins-spi {
|
|
pins = "gpio46",
|
|
"gpio47",
|
|
"gpio48",
|
|
"gpio49",
|
|
"gpio50";
|
|
function = "alt5";
|
|
};
|
|
};
|
|
spi3_gpio0: spi3_gpio0 {
|
|
pins-spi {
|
|
pins = "gpio0",
|
|
"gpio1",
|
|
"gpio2",
|
|
"gpio3";
|
|
function = "alt3";
|
|
};
|
|
};
|
|
spi4_gpio4: spi4_gpio4 {
|
|
pins-spi {
|
|
pins = "gpio4",
|
|
"gpio5",
|
|
"gpio6",
|
|
"gpio7";
|
|
function = "alt3";
|
|
};
|
|
};
|
|
spi5_gpio12: spi5_gpio12 {
|
|
pins-spi {
|
|
pins = "gpio12",
|
|
"gpio13",
|
|
"gpio14",
|
|
"gpio15";
|
|
function = "alt3";
|
|
};
|
|
};
|
|
spi6_gpio18: spi6_gpio18 {
|
|
pins-spi {
|
|
pins = "gpio18",
|
|
"gpio19",
|
|
"gpio20",
|
|
"gpio21";
|
|
function = "alt3";
|
|
};
|
|
};
|
|
|
|
uart2_gpio0: uart2_gpio0 {
|
|
pin-tx {
|
|
pins = "gpio0";
|
|
function = "alt4";
|
|
bias-disable;
|
|
};
|
|
pin-rx {
|
|
pins = "gpio1";
|
|
function = "alt4";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 {
|
|
pin-cts {
|
|
pins = "gpio2";
|
|
function = "alt4";
|
|
bias-pull-up;
|
|
};
|
|
pin-rts {
|
|
pins = "gpio3";
|
|
function = "alt4";
|
|
bias-disable;
|
|
};
|
|
};
|
|
uart3_gpio4: uart3_gpio4 {
|
|
pin-tx {
|
|
pins = "gpio4";
|
|
function = "alt4";
|
|
bias-disable;
|
|
};
|
|
pin-rx {
|
|
pins = "gpio5";
|
|
function = "alt4";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 {
|
|
pin-cts {
|
|
pins = "gpio6";
|
|
function = "alt4";
|
|
bias-pull-up;
|
|
};
|
|
pin-rts {
|
|
pins = "gpio7";
|
|
function = "alt4";
|
|
bias-disable;
|
|
};
|
|
};
|
|
uart4_gpio8: uart4_gpio8 {
|
|
pin-tx {
|
|
pins = "gpio8";
|
|
function = "alt4";
|
|
bias-disable;
|
|
};
|
|
pin-rx {
|
|
pins = "gpio9";
|
|
function = "alt4";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 {
|
|
pin-cts {
|
|
pins = "gpio10";
|
|
function = "alt4";
|
|
bias-pull-up;
|
|
};
|
|
pin-rts {
|
|
pins = "gpio11";
|
|
function = "alt4";
|
|
bias-disable;
|
|
};
|
|
};
|
|
uart5_gpio12: uart5_gpio12 {
|
|
pin-tx {
|
|
pins = "gpio12";
|
|
function = "alt4";
|
|
bias-disable;
|
|
};
|
|
pin-rx {
|
|
pins = "gpio13";
|
|
function = "alt4";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 {
|
|
pin-cts {
|
|
pins = "gpio14";
|
|
function = "alt4";
|
|
bias-pull-up;
|
|
};
|
|
pin-rts {
|
|
pins = "gpio15";
|
|
function = "alt4";
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
&rmem {
|
|
#address-cells = <2>;
|
|
};
|
|
|
|
&cma {
|
|
/*
|
|
* arm64 reserves the CMA by default somewhere in ZONE_DMA32,
|
|
* that's not good enough for the BCM2711 as some devices can
|
|
* only address the lower 1G of memory (ZONE_DMA).
|
|
*/
|
|
alloc-ranges = <0x0 0x00000000 0x40000000>;
|
|
};
|
|
|
|
&i2c0 {
|
|
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
|
|
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
&i2c1 {
|
|
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
|
|
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
&mailbox {
|
|
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
&sdhci {
|
|
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
&sdhost {
|
|
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
&spi {
|
|
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
&spi1 {
|
|
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
&spi2 {
|
|
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
&system_timer {
|
|
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
&txp {
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
&uart0 {
|
|
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
&uart1 {
|
|
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
&usb {
|
|
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
&vec {
|
|
compatible = "brcm,bcm2711-vec";
|
|
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|