389 lines
7.0 KiB
Plaintext
389 lines
7.0 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
|
|
/*
|
|
* Device Tree file for Ctera C200-V2
|
|
*
|
|
* Copyright (C) 2022 Pawel Dembicki <paweldembicki@gmail.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "armada-370.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/thermal/thermal.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
/ {
|
|
model = "Ctera C200 V2";
|
|
compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp";
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200";
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x40000000>; /* 1024 MB */
|
|
};
|
|
|
|
soc {
|
|
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
|
|
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
|
|
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
|
|
};
|
|
|
|
thermal-zones {
|
|
ethphy-thermal {
|
|
polling-delay = <20000>;
|
|
polling-delay-passive = <2000>;
|
|
|
|
thermal-sensors = <ðphy0>;
|
|
|
|
trips {
|
|
ethphy_alert1: trip1 {
|
|
temperature = <65000>;
|
|
hysteresis = <4000>;
|
|
type = "passive";
|
|
};
|
|
|
|
ethphy_crit: trip2 {
|
|
temperature = <100000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
beeper {
|
|
compatible = "pwm-beeper";
|
|
pinctrl-0 = <&pmx_beeper>;
|
|
pinctrl-names = "default";
|
|
pwms = <&gpio1 31 4000>;
|
|
};
|
|
|
|
gpio-poweroff {
|
|
compatible = "gpio-poweroff";
|
|
pinctrl-0 = <&pmx_poweroff>;
|
|
pinctrl-names = "default";
|
|
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-0 = <&pmx_buttons>;
|
|
pinctrl-names = "default";
|
|
|
|
power {
|
|
label = "Power Button";
|
|
linux,code = <KEY_POWER>;
|
|
gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reset {
|
|
label = "Reset Button";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
usb1 {
|
|
label = "USB1 Button";
|
|
linux,code = <BTN_0>;
|
|
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
usb2 {
|
|
label = "USB2 Button";
|
|
linux,code = <BTN_1>;
|
|
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
|
|
pinctrl-names = "default";
|
|
|
|
led-0 {
|
|
function = LED_FUNCTION_USB;
|
|
function-enumerator = <2>;
|
|
color = <LED_COLOR_ID_RED>;
|
|
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led-1 {
|
|
function = LED_FUNCTION_USB;
|
|
function-enumerator = <2>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led-2 {
|
|
function = LED_FUNCTION_USB;
|
|
function-enumerator = <1>;
|
|
color = <LED_COLOR_ID_RED>;
|
|
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led-3 {
|
|
function = LED_FUNCTION_USB;
|
|
function-enumerator = <1>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led-4 {
|
|
function = LED_FUNCTION_DISK;
|
|
function-enumerator = <2>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led-5 {
|
|
function = LED_FUNCTION_DISK;
|
|
function-enumerator = <1>;
|
|
color = <LED_COLOR_ID_RED>;
|
|
gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led-6 {
|
|
function = LED_FUNCTION_DISK;
|
|
function-enumerator = <2>;
|
|
color = <LED_COLOR_ID_RED>;
|
|
gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led-7 {
|
|
function = LED_FUNCTION_INDICATOR;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
led-8 {
|
|
function = LED_FUNCTION_DISK_ERR;
|
|
color = <LED_COLOR_ID_RED>;
|
|
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led-9 {
|
|
function = LED_FUNCTION_DISK_ERR;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led-10 {
|
|
function = LED_FUNCTION_STATUS;
|
|
color = <LED_COLOR_ID_RED>;
|
|
gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led-11 {
|
|
function = LED_FUNCTION_DISK;
|
|
function-enumerator = <1>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led-12 {
|
|
function = LED_FUNCTION_STATUS;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&coherencyfab {
|
|
broken-idle;
|
|
};
|
|
|
|
ð1 {
|
|
pinctrl-0 = <&ge1_rgmii_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
phy-handle = <ðphy0>;
|
|
phy-connection-type = "rgmii-id";
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
pinctrl-names = "default";
|
|
clock-frequency = <100000>;
|
|
status = "okay";
|
|
|
|
hwmon@2a {
|
|
compatible = "nuvoton,nct7802";
|
|
reg = <0x2a>;
|
|
};
|
|
|
|
rtc@30 {
|
|
compatible = "sii,s35390a";
|
|
reg = <0x30>;
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
pinctrl-0 = <&mdio_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
|
|
reg = <0>;
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&nand_controller {
|
|
status = "okay";
|
|
|
|
nand@0 {
|
|
reg = <0>;
|
|
label = "pxa3xx_nand-0";
|
|
nand-rb = <0>;
|
|
marvell,nand-keep-config;
|
|
nand-on-flash-bbt;
|
|
nand-ecc-strength = <4>;
|
|
nand-ecc-step-size = <512>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "uboot";
|
|
reg = <0x0000000 0x200000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@200000 {
|
|
label = "certificate";
|
|
reg = <0x0200000 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@300000 {
|
|
label = "preset_cfg";
|
|
reg = <0x0300000 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@400000 {
|
|
label = "dev_params";
|
|
reg = <0x0400000 0x100000>;
|
|
read-only;
|
|
};
|
|
partition@500000 {
|
|
label = "active_bank";
|
|
reg = <0x0500000 0x0100000>;
|
|
};
|
|
|
|
partition@600000 {
|
|
label = "magic";
|
|
reg = <0x0600000 0x0100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@700000 {
|
|
label = "bank1";
|
|
reg = <0x0700000 0x2800000>;
|
|
};
|
|
|
|
partition@2f00000 {
|
|
label = "bank2";
|
|
reg = <0x2f00000 0x2800000>;
|
|
};
|
|
|
|
/* 0x5700000-0x5a00000 undefined in vendor firmware */
|
|
|
|
partition@5a00000 {
|
|
label = "reserved";
|
|
reg = <0x5a00000 0x2000000>;
|
|
};
|
|
|
|
partition@7a00000 {
|
|
label = "rootfs";
|
|
reg = <0x7a00000 0x8600000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pciec {
|
|
status = "okay";
|
|
|
|
pcie@1,0 { /* Renesas uPD720202 USB 3.0 controller */
|
|
pinctrl-0 = <&pmx_pcie>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
pmx_poweroff: pmx-poweroff {
|
|
marvell,pins = "mpp7";
|
|
marvell,function = "gpo";
|
|
};
|
|
|
|
pmx_power_cpu: pmx-power-cpu {
|
|
marvell,pins = "mpp4";
|
|
marvell,function = "vdd";
|
|
};
|
|
|
|
pmx_buttons: pmx-buttons {
|
|
marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_leds1: pmx-leds1 {
|
|
marvell,pins = "mpp47";
|
|
marvell,function = "gpo";
|
|
};
|
|
|
|
pmx_leds2: pmx-leds2 {
|
|
marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51",
|
|
"mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_pcie: pmx-pcie {
|
|
marvell,pins = "mpp59";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_beeper: pmx-beeper {
|
|
marvell,pins = "mpp63";
|
|
marvell,function = "gpio";
|
|
};
|
|
};
|
|
|
|
&pmsu {
|
|
pinctrl-0 = <&pmx_power_cpu>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&rtc {
|
|
status = "disabled";
|
|
};
|
|
|
|
&sata {
|
|
nr-ports = <2>;
|
|
status = "okay";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
hdd0_temp: sata-port@0 {
|
|
reg = <0>;
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
|
|
hdd1_temp: sata-port@1 {
|
|
reg = <1>;
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|