586 lines
18 KiB
ReStructuredText
586 lines
18 KiB
ReStructuredText
.. include:: <isonum.txt>
|
|
|
|
.. _joystick-doc:
|
|
|
|
Introduction
|
|
============
|
|
|
|
The joystick driver for Linux provides support for a variety of joysticks
|
|
and similar devices. It is based on a larger project aiming to support all
|
|
input devices in Linux.
|
|
|
|
The mailing list for the project is:
|
|
|
|
linux-input@vger.kernel.org
|
|
|
|
send "subscribe linux-input" to majordomo@vger.kernel.org to subscribe to it.
|
|
|
|
Usage
|
|
=====
|
|
|
|
For basic usage you just choose the right options in kernel config and
|
|
you should be set.
|
|
|
|
Utilities
|
|
---------
|
|
|
|
For testing and other purposes (for example serial devices), there is a set
|
|
of utilities, such as ``jstest``, ``jscal``, and ``evtest``,
|
|
usually packaged as ``joystick``, ``input-utils``, ``evtest``, and so on.
|
|
|
|
``inputattach`` utility is required if your joystick is connected to a
|
|
serial port.
|
|
|
|
Device nodes
|
|
------------
|
|
|
|
For applications to be able to use the joysticks, device nodes should be
|
|
created in /dev. Normally it is done automatically by the system, but
|
|
it can also be done by hand::
|
|
|
|
cd /dev
|
|
rm js*
|
|
mkdir input
|
|
mknod input/js0 c 13 0
|
|
mknod input/js1 c 13 1
|
|
mknod input/js2 c 13 2
|
|
mknod input/js3 c 13 3
|
|
ln -s input/js0 js0
|
|
ln -s input/js1 js1
|
|
ln -s input/js2 js2
|
|
ln -s input/js3 js3
|
|
|
|
For testing with inpututils it's also convenient to create these::
|
|
|
|
mknod input/event0 c 13 64
|
|
mknod input/event1 c 13 65
|
|
mknod input/event2 c 13 66
|
|
mknod input/event3 c 13 67
|
|
|
|
Modules needed
|
|
--------------
|
|
|
|
For all joystick drivers to function, you'll need the userland interface
|
|
module in kernel, either loaded or compiled in::
|
|
|
|
modprobe joydev
|
|
|
|
For gameport joysticks, you'll have to load the gameport driver as well::
|
|
|
|
modprobe ns558
|
|
|
|
And for serial port joysticks, you'll need the serial input line
|
|
discipline module loaded and the inputattach utility started::
|
|
|
|
modprobe serport
|
|
inputattach -xxx /dev/tts/X &
|
|
|
|
In addition to that, you'll need the joystick driver module itself, most
|
|
usually you'll have an analog joystick::
|
|
|
|
modprobe analog
|
|
|
|
For automatic module loading, something like this might work - tailor to
|
|
your needs::
|
|
|
|
alias tty-ldisc-2 serport
|
|
alias char-major-13 input
|
|
above input joydev ns558 analog
|
|
options analog map=gamepad,none,2btn
|
|
|
|
Verifying that it works
|
|
-----------------------
|
|
|
|
For testing the joystick driver functionality, there is the jstest
|
|
program in the utilities package. You run it by typing::
|
|
|
|
jstest /dev/input/js0
|
|
|
|
And it should show a line with the joystick values, which update as you
|
|
move the stick, and press its buttons. The axes should all be zero when the
|
|
joystick is in the center position. They should not jitter by themselves to
|
|
other close values, and they also should be steady in any other position of
|
|
the stick. They should have the full range from -32767 to 32767. If all this
|
|
is met, then it's all fine, and you can play the games. :)
|
|
|
|
If it's not, then there might be a problem. Try to calibrate the joystick,
|
|
and if it still doesn't work, read the drivers section of this file, the
|
|
troubleshooting section, and the FAQ.
|
|
|
|
Calibration
|
|
-----------
|
|
|
|
For most joysticks you won't need any manual calibration, since the
|
|
joystick should be autocalibrated by the driver automagically. However, with
|
|
some analog joysticks, that either do not use linear resistors, or if you
|
|
want better precision, you can use the jscal program::
|
|
|
|
jscal -c /dev/input/js0
|
|
|
|
included in the joystick package to set better correction coefficients than
|
|
what the driver would choose itself.
|
|
|
|
After calibrating the joystick you can verify if you like the new
|
|
calibration using the jstest command, and if you do, you then can save the
|
|
correction coefficients into a file::
|
|
|
|
jscal -p /dev/input/js0 > /etc/joystick.cal
|
|
|
|
And add a line to your rc script executing that file::
|
|
|
|
source /etc/joystick.cal
|
|
|
|
This way, after the next reboot your joystick will remain calibrated. You
|
|
can also add the ``jscal -p`` line to your shutdown script.
|
|
|
|
Hardware-specific driver information
|
|
====================================
|
|
|
|
In this section each of the separate hardware specific drivers is described.
|
|
|
|
Analog joysticks
|
|
----------------
|
|
|
|
The analog.c driver uses the standard analog inputs of the gameport, and thus
|
|
supports all standard joysticks and gamepads. It uses a very advanced
|
|
routine for this, allowing for data precision that can't be found on any
|
|
other system.
|
|
|
|
It also supports extensions like additional hats and buttons compatible
|
|
with CH Flightstick Pro, ThrustMaster FCS or 6 and 8 button gamepads. Saitek
|
|
Cyborg 'digital' joysticks are also supported by this driver, because
|
|
they're basically souped up CHF sticks.
|
|
|
|
However the only types that can be autodetected are:
|
|
|
|
* 2-axis, 4-button joystick
|
|
* 3-axis, 4-button joystick
|
|
* 4-axis, 4-button joystick
|
|
* Saitek Cyborg 'digital' joysticks
|
|
|
|
For other joystick types (more/less axes, hats, and buttons) support
|
|
you'll need to specify the types either on the kernel command line or on the
|
|
module command line, when inserting analog into the kernel. The
|
|
parameters are::
|
|
|
|
analog.map=<type1>,<type2>,<type3>,....
|
|
|
|
'type' is type of the joystick from the table below, defining joysticks
|
|
present on gameports in the system, starting with gameport0, second 'type'
|
|
entry defining joystick on gameport1 and so on.
|
|
|
|
========= =====================================================
|
|
Type Meaning
|
|
========= =====================================================
|
|
none No analog joystick on that port
|
|
auto Autodetect joystick
|
|
2btn 2-button n-axis joystick
|
|
y-joy Two 2-button 2-axis joysticks on an Y-cable
|
|
y-pad Two 2-button 2-axis gamepads on an Y-cable
|
|
fcs Thrustmaster FCS compatible joystick
|
|
chf Joystick with a CH Flightstick compatible hat
|
|
fullchf CH Flightstick compatible with two hats and 6 buttons
|
|
gamepad 4/6-button n-axis gamepad
|
|
gamepad8 8-button 2-axis gamepad
|
|
========= =====================================================
|
|
|
|
In case your joystick doesn't fit in any of the above categories, you can
|
|
specify the type as a number by combining the bits in the table below. This
|
|
is not recommended unless you really know what are you doing. It's not
|
|
dangerous, but not simple either.
|
|
|
|
==== =========================
|
|
Bit Meaning
|
|
==== =========================
|
|
0 Axis X1
|
|
1 Axis Y1
|
|
2 Axis X2
|
|
3 Axis Y2
|
|
4 Button A
|
|
5 Button B
|
|
6 Button C
|
|
7 Button D
|
|
8 CHF Buttons X and Y
|
|
9 CHF Hat 1
|
|
10 CHF Hat 2
|
|
11 FCS Hat
|
|
12 Pad Button X
|
|
13 Pad Button Y
|
|
14 Pad Button U
|
|
15 Pad Button V
|
|
16 Saitek F1-F4 Buttons
|
|
17 Saitek Digital Mode
|
|
19 GamePad
|
|
20 Joy2 Axis X1
|
|
21 Joy2 Axis Y1
|
|
22 Joy2 Axis X2
|
|
23 Joy2 Axis Y2
|
|
24 Joy2 Button A
|
|
25 Joy2 Button B
|
|
26 Joy2 Button C
|
|
27 Joy2 Button D
|
|
31 Joy2 GamePad
|
|
==== =========================
|
|
|
|
Microsoft SideWinder joysticks
|
|
------------------------------
|
|
|
|
Microsoft 'Digital Overdrive' protocol is supported by the sidewinder.c
|
|
module. All currently supported joysticks:
|
|
|
|
* Microsoft SideWinder 3D Pro
|
|
* Microsoft SideWinder Force Feedback Pro
|
|
* Microsoft SideWinder Force Feedback Wheel
|
|
* Microsoft SideWinder FreeStyle Pro
|
|
* Microsoft SideWinder GamePad (up to four, chained)
|
|
* Microsoft SideWinder Precision Pro
|
|
* Microsoft SideWinder Precision Pro USB
|
|
|
|
are autodetected, and thus no module parameters are needed.
|
|
|
|
There is one caveat with the 3D Pro. There are 9 buttons reported,
|
|
although the joystick has only 8. The 9th button is the mode switch on the
|
|
rear side of the joystick. However, moving it, you'll reset the joystick,
|
|
and make it unresponsive for about a one third of a second. Furthermore, the
|
|
joystick will also re-center itself, taking the position it was in during
|
|
this time as a new center position. Use it if you want, but think first.
|
|
|
|
The SideWinder Standard is not a digital joystick, and thus is supported
|
|
by the analog driver described above.
|
|
|
|
Logitech ADI devices
|
|
--------------------
|
|
|
|
Logitech ADI protocol is supported by the adi.c module. It should support
|
|
any Logitech device using this protocol. This includes, but is not limited
|
|
to:
|
|
|
|
* Logitech CyberMan 2
|
|
* Logitech ThunderPad Digital
|
|
* Logitech WingMan Extreme Digital
|
|
* Logitech WingMan Formula
|
|
* Logitech WingMan Interceptor
|
|
* Logitech WingMan GamePad
|
|
* Logitech WingMan GamePad USB
|
|
* Logitech WingMan GamePad Extreme
|
|
* Logitech WingMan Extreme Digital 3D
|
|
|
|
ADI devices are autodetected, and the driver supports up to two (any
|
|
combination of) devices on a single gameport, using a Y-cable or chained
|
|
together.
|
|
|
|
Logitech WingMan Joystick, Logitech WingMan Attack, Logitech WingMan
|
|
Extreme and Logitech WingMan ThunderPad are not digital joysticks and are
|
|
handled by the analog driver described above. Logitech WingMan Warrior and
|
|
Logitech Magellan are supported by serial drivers described below. Logitech
|
|
WingMan Force and Logitech WingMan Formula Force are supported by the
|
|
I-Force driver described below. Logitech CyberMan is not supported yet.
|
|
|
|
Gravis GrIP
|
|
-----------
|
|
|
|
Gravis GrIP protocol is supported by the grip.c module. It currently
|
|
supports:
|
|
|
|
* Gravis GamePad Pro
|
|
* Gravis BlackHawk Digital
|
|
* Gravis Xterminator
|
|
* Gravis Xterminator DualControl
|
|
|
|
All these devices are autodetected, and you can even use any combination
|
|
of up to two of these pads either chained together or using a Y-cable on a
|
|
single gameport.
|
|
|
|
GrIP MultiPort isn't supported yet. Gravis Stinger is a serial device and is
|
|
supported by the stinger driver. Other Gravis joysticks are supported by the
|
|
analog driver.
|
|
|
|
FPGaming A3D and MadCatz A3D
|
|
----------------------------
|
|
|
|
The Assassin 3D protocol created by FPGaming, is used both by FPGaming
|
|
themselves and is licensed to MadCatz. A3D devices are supported by the
|
|
a3d.c module. It currently supports:
|
|
|
|
* FPGaming Assassin 3D
|
|
* MadCatz Panther
|
|
* MadCatz Panther XL
|
|
|
|
All these devices are autodetected. Because the Assassin 3D and the Panther
|
|
allow connecting analog joysticks to them, you'll need to load the analog
|
|
driver as well to handle the attached joysticks.
|
|
|
|
The trackball should work with USB mousedev module as a normal mouse. See
|
|
the USB documentation for how to setup a USB mouse.
|
|
|
|
ThrustMaster DirectConnect (BSP)
|
|
--------------------------------
|
|
|
|
The TM DirectConnect (BSP) protocol is supported by the tmdc.c
|
|
module. This includes, but is not limited to:
|
|
|
|
* ThrustMaster Millennium 3D Interceptor
|
|
* ThrustMaster 3D Rage Pad
|
|
* ThrustMaster Fusion Digital Game Pad
|
|
|
|
Devices not directly supported, but hopefully working are:
|
|
|
|
* ThrustMaster FragMaster
|
|
* ThrustMaster Attack Throttle
|
|
|
|
If you have one of these, contact me.
|
|
|
|
TMDC devices are autodetected, and thus no parameters to the module
|
|
are needed. Up to two TMDC devices can be connected to one gameport, using
|
|
a Y-cable.
|
|
|
|
Creative Labs Blaster
|
|
---------------------
|
|
|
|
The Blaster protocol is supported by the cobra.c module. It supports only
|
|
the:
|
|
|
|
* Creative Blaster GamePad Cobra
|
|
|
|
Up to two of these can be used on a single gameport, using a Y-cable.
|
|
|
|
Genius Digital joysticks
|
|
------------------------
|
|
|
|
The Genius digitally communicating joysticks are supported by the gf2k.c
|
|
module. This includes:
|
|
|
|
* Genius Flight2000 F-23 joystick
|
|
* Genius Flight2000 F-31 joystick
|
|
* Genius G-09D gamepad
|
|
|
|
Other Genius digital joysticks are not supported yet, but support can be
|
|
added fairly easily.
|
|
|
|
InterAct Digital joysticks
|
|
--------------------------
|
|
|
|
The InterAct digitally communicating joysticks are supported by the
|
|
interact.c module. This includes:
|
|
|
|
* InterAct HammerHead/FX gamepad
|
|
* InterAct ProPad8 gamepad
|
|
|
|
Other InterAct digital joysticks are not supported yet, but support can be
|
|
added fairly easily.
|
|
|
|
PDPI Lightning 4 gamecards
|
|
--------------------------
|
|
|
|
PDPI Lightning 4 gamecards are supported by the lightning.c module.
|
|
Once the module is loaded, the analog driver can be used to handle the
|
|
joysticks. Digitally communicating joystick will work only on port 0, while
|
|
using Y-cables, you can connect up to 8 analog joysticks to a single L4
|
|
card, 16 in case you have two in your system.
|
|
|
|
Trident 4DWave / Aureal Vortex
|
|
------------------------------
|
|
|
|
Soundcards with a Trident 4DWave DX/NX or Aureal Vortex/Vortex2 chipset
|
|
provide an "Enhanced Game Port" mode where the soundcard handles polling the
|
|
joystick. This mode is supported by the pcigame.c module. Once loaded the
|
|
analog driver can use the enhanced features of these gameports..
|
|
|
|
Crystal SoundFusion
|
|
-------------------
|
|
|
|
Soundcards with Crystal SoundFusion chipsets provide an "Enhanced Game
|
|
Port", much like the 4DWave or Vortex above. This, and also the normal mode
|
|
for the port of the SoundFusion is supported by the cs461x.c module.
|
|
|
|
SoundBlaster Live!
|
|
------------------
|
|
|
|
The Live! has a special PCI gameport, which, although it doesn't provide
|
|
any "Enhanced" stuff like 4DWave and friends, is quite a bit faster than
|
|
its ISA counterparts. It also requires special support, hence the
|
|
emu10k1-gp.c module for it instead of the normal ns558.c one.
|
|
|
|
SoundBlaster 64 and 128 - ES1370 and ES1371, ESS Solo1 and S3 SonicVibes
|
|
------------------------------------------------------------------------
|
|
|
|
These PCI soundcards have specific gameports. They are handled by the
|
|
sound drivers themselves. Make sure you select gameport support in the
|
|
joystick menu and sound card support in the sound menu for your appropriate
|
|
card.
|
|
|
|
Amiga
|
|
-----
|
|
|
|
Amiga joysticks, connected to an Amiga, are supported by the amijoy.c
|
|
driver. Since they can't be autodetected, the driver has a command line:
|
|
|
|
amijoy.map=<a>,<b>
|
|
|
|
a and b define the joysticks connected to the JOY0DAT and JOY1DAT ports of
|
|
the Amiga.
|
|
|
|
====== ===========================
|
|
Value Joystick type
|
|
====== ===========================
|
|
0 None
|
|
1 1-button digital joystick
|
|
====== ===========================
|
|
|
|
No more joystick types are supported now, but that should change in the
|
|
future if I get an Amiga in the reach of my fingers.
|
|
|
|
Game console and 8-bit pads and joysticks
|
|
-----------------------------------------
|
|
|
|
These pads and joysticks are not designed for PCs and other computers
|
|
Linux runs on, and usually require a special connector for attaching
|
|
them through a parallel port.
|
|
|
|
See :ref:`joystick-parport` for more info.
|
|
|
|
SpaceTec/LabTec devices
|
|
-----------------------
|
|
|
|
SpaceTec serial devices communicate using the SpaceWare protocol. It is
|
|
supported by the spaceorb.c and spaceball.c drivers. The devices currently
|
|
supported by spaceorb.c are:
|
|
|
|
* SpaceTec SpaceBall Avenger
|
|
* SpaceTec SpaceOrb 360
|
|
|
|
Devices currently supported by spaceball.c are:
|
|
|
|
* SpaceTec SpaceBall 4000 FLX
|
|
|
|
In addition to having the spaceorb/spaceball and serport modules in the
|
|
kernel, you also need to attach a serial port to it. To do that, run the
|
|
inputattach program::
|
|
|
|
inputattach --spaceorb /dev/tts/x &
|
|
|
|
or::
|
|
|
|
inputattach --spaceball /dev/tts/x &
|
|
|
|
where /dev/tts/x is the serial port which the device is connected to. After
|
|
doing this, the device will be reported and will start working.
|
|
|
|
There is one caveat with the SpaceOrb. The button #6, the one on the bottom
|
|
side of the orb, although reported as an ordinary button, causes internal
|
|
recentering of the spaceorb, moving the zero point to the position in which
|
|
the ball is at the moment of pressing the button. So, think first before
|
|
you bind it to some other function.
|
|
|
|
SpaceTec SpaceBall 2003 FLX and 3003 FLX are not supported yet.
|
|
|
|
Logitech SWIFT devices
|
|
----------------------
|
|
|
|
The SWIFT serial protocol is supported by the warrior.c module. It
|
|
currently supports only the:
|
|
|
|
* Logitech WingMan Warrior
|
|
|
|
but in the future, Logitech CyberMan (the original one, not CM2) could be
|
|
supported as well. To use the module, you need to run inputattach after you
|
|
insert/compile the module into your kernel::
|
|
|
|
inputattach --warrior /dev/tts/x &
|
|
|
|
/dev/tts/x is the serial port your Warrior is attached to.
|
|
|
|
Magellan / Space Mouse
|
|
----------------------
|
|
|
|
The Magellan (or Space Mouse), manufactured by LogiCad3d (formerly Space
|
|
Systems), for many other companies (Logitech, HP, ...) is supported by the
|
|
joy-magellan module. It currently supports only the:
|
|
|
|
* Magellan 3D
|
|
* Space Mouse
|
|
|
|
models; the additional buttons on the 'Plus' versions are not supported yet.
|
|
|
|
To use it, you need to attach the serial port to the driver using the::
|
|
|
|
inputattach --magellan /dev/tts/x &
|
|
|
|
command. After that the Magellan will be detected, initialized, will beep,
|
|
and the /dev/input/jsX device should become usable.
|
|
|
|
I-Force devices
|
|
---------------
|
|
|
|
All I-Force devices are supported by the iforce module. This includes:
|
|
|
|
* AVB Mag Turbo Force
|
|
* AVB Top Shot Pegasus
|
|
* AVB Top Shot Force Feedback Racing Wheel
|
|
* Logitech WingMan Force
|
|
* Logitech WingMan Force Wheel
|
|
* Guillemot Race Leader Force Feedback
|
|
* Guillemot Force Feedback Racing Wheel
|
|
* Thrustmaster Motor Sport GT
|
|
|
|
To use it, you need to attach the serial port to the driver using the::
|
|
|
|
inputattach --iforce /dev/tts/x &
|
|
|
|
command. After that the I-Force device will be detected, and the
|
|
/dev/input/jsX device should become usable.
|
|
|
|
In case you're using the device via the USB port, the inputattach command
|
|
isn't needed.
|
|
|
|
The I-Force driver now supports force feedback via the event interface.
|
|
|
|
Please note that Logitech WingMan 3D devices are _not_ supported by this
|
|
module, rather by hid. Force feedback is not supported for those devices.
|
|
Logitech gamepads are also hid devices.
|
|
|
|
Gravis Stinger gamepad
|
|
----------------------
|
|
|
|
The Gravis Stinger serial port gamepad, designed for use with laptop
|
|
computers, is supported by the stinger.c module. To use it, attach the
|
|
serial port to the driver using::
|
|
|
|
inputattach --stinger /dev/tty/x &
|
|
|
|
where x is the number of the serial port.
|
|
|
|
Troubleshooting
|
|
===============
|
|
|
|
There is quite a high probability that you run into some problems. For
|
|
testing whether the driver works, if in doubt, use the jstest utility in
|
|
some of its modes. The most useful modes are "normal" - for the 1.x
|
|
interface, and "old" for the "0.x" interface. You run it by typing::
|
|
|
|
jstest --normal /dev/input/js0
|
|
jstest --old /dev/input/js0
|
|
|
|
Additionally you can do a test with the evtest utility::
|
|
|
|
evtest /dev/input/event0
|
|
|
|
Oh, and read the FAQ! :)
|
|
|
|
FAQ
|
|
===
|
|
|
|
:Q: Running 'jstest /dev/input/js0' results in "File not found" error. What's the
|
|
cause?
|
|
:A: The device files don't exist. Create them (see section 2.2).
|
|
|
|
:Q: Is it possible to connect my old Atari/Commodore/Amiga/console joystick
|
|
or pad that uses a 9-pin D-type Cannon connector to the serial port of my
|
|
PC?
|
|
:A: Yes, it is possible, but it'll burn your serial port or the pad. It
|
|
won't work, of course.
|
|
|
|
:Q: My joystick doesn't work with Quake / Quake 2. What's the cause?
|
|
:A: Quake / Quake 2 don't support joystick. Use joy2key to simulate keypresses
|
|
for them.
|