329 lines
13 KiB
ReStructuredText
329 lines
13 KiB
ReStructuredText
.. _writing-usb-driver:
|
|
|
|
==========================
|
|
Writing USB Device Drivers
|
|
==========================
|
|
|
|
:Author: Greg Kroah-Hartman
|
|
|
|
Introduction
|
|
============
|
|
|
|
The Linux USB subsystem has grown from supporting only two different
|
|
types of devices in the 2.2.7 kernel (mice and keyboards), to over 20
|
|
different types of devices in the 2.4 kernel. Linux currently supports
|
|
almost all USB class devices (standard types of devices like keyboards,
|
|
mice, modems, printers and speakers) and an ever-growing number of
|
|
vendor-specific devices (such as USB to serial converters, digital
|
|
cameras, Ethernet devices and MP3 players). For a full list of the
|
|
different USB devices currently supported, see Resources.
|
|
|
|
The remaining kinds of USB devices that do not have support on Linux are
|
|
almost all vendor-specific devices. Each vendor decides to implement a
|
|
custom protocol to talk to their device, so a custom driver usually
|
|
needs to be created. Some vendors are open with their USB protocols and
|
|
help with the creation of Linux drivers, while others do not publish
|
|
them, and developers are forced to reverse-engineer. See Resources for
|
|
some links to handy reverse-engineering tools.
|
|
|
|
Because each different protocol causes a new driver to be created, I
|
|
have written a generic USB driver skeleton, modelled after the
|
|
pci-skeleton.c file in the kernel source tree upon which many PCI
|
|
network drivers have been based. This USB skeleton can be found at
|
|
drivers/usb/usb-skeleton.c in the kernel source tree. In this article I
|
|
will walk through the basics of the skeleton driver, explaining the
|
|
different pieces and what needs to be done to customize it to your
|
|
specific device.
|
|
|
|
Linux USB Basics
|
|
================
|
|
|
|
If you are going to write a Linux USB driver, please become familiar
|
|
with the USB protocol specification. It can be found, along with many
|
|
other useful documents, at the USB home page (see Resources). An
|
|
excellent introduction to the Linux USB subsystem can be found at the
|
|
USB Working Devices List (see Resources). It explains how the Linux USB
|
|
subsystem is structured and introduces the reader to the concept of USB
|
|
urbs (USB Request Blocks), which are essential to USB drivers.
|
|
|
|
The first thing a Linux USB driver needs to do is register itself with
|
|
the Linux USB subsystem, giving it some information about which devices
|
|
the driver supports and which functions to call when a device supported
|
|
by the driver is inserted or removed from the system. All of this
|
|
information is passed to the USB subsystem in the :c:type:`usb_driver`
|
|
structure. The skeleton driver declares a :c:type:`usb_driver` as::
|
|
|
|
static struct usb_driver skel_driver = {
|
|
.name = "skeleton",
|
|
.probe = skel_probe,
|
|
.disconnect = skel_disconnect,
|
|
.suspend = skel_suspend,
|
|
.resume = skel_resume,
|
|
.pre_reset = skel_pre_reset,
|
|
.post_reset = skel_post_reset,
|
|
.id_table = skel_table,
|
|
.supports_autosuspend = 1,
|
|
};
|
|
|
|
|
|
The variable name is a string that describes the driver. It is used in
|
|
informational messages printed to the system log. The probe and
|
|
disconnect function pointers are called when a device that matches the
|
|
information provided in the ``id_table`` variable is either seen or
|
|
removed.
|
|
|
|
The fops and minor variables are optional. Most USB drivers hook into
|
|
another kernel subsystem, such as the SCSI, network or TTY subsystem.
|
|
These types of drivers register themselves with the other kernel
|
|
subsystem, and any user-space interactions are provided through that
|
|
interface. But for drivers that do not have a matching kernel subsystem,
|
|
such as MP3 players or scanners, a method of interacting with user space
|
|
is needed. The USB subsystem provides a way to register a minor device
|
|
number and a set of :c:type:`file_operations` function pointers that enable
|
|
this user-space interaction. The skeleton driver needs this kind of
|
|
interface, so it provides a minor starting number and a pointer to its
|
|
:c:type:`file_operations` functions.
|
|
|
|
The USB driver is then registered with a call to usb_register(),
|
|
usually in the driver's init function, as shown here::
|
|
|
|
static int __init usb_skel_init(void)
|
|
{
|
|
int result;
|
|
|
|
/* register this driver with the USB subsystem */
|
|
result = usb_register(&skel_driver);
|
|
if (result < 0) {
|
|
pr_err("usb_register failed for the %s driver. Error number %d\n",
|
|
skel_driver.name, result);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
module_init(usb_skel_init);
|
|
|
|
|
|
When the driver is unloaded from the system, it needs to deregister
|
|
itself with the USB subsystem. This is done with usb_deregister()
|
|
function::
|
|
|
|
static void __exit usb_skel_exit(void)
|
|
{
|
|
/* deregister this driver with the USB subsystem */
|
|
usb_deregister(&skel_driver);
|
|
}
|
|
module_exit(usb_skel_exit);
|
|
|
|
|
|
To enable the linux-hotplug system to load the driver automatically when
|
|
the device is plugged in, you need to create a ``MODULE_DEVICE_TABLE``.
|
|
The following code tells the hotplug scripts that this module supports a
|
|
single device with a specific vendor and product ID::
|
|
|
|
/* table of devices that work with this driver */
|
|
static struct usb_device_id skel_table [] = {
|
|
{ USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) },
|
|
{ } /* Terminating entry */
|
|
};
|
|
MODULE_DEVICE_TABLE (usb, skel_table);
|
|
|
|
|
|
There are other macros that can be used in describing a struct
|
|
:c:type:`usb_device_id` for drivers that support a whole class of USB
|
|
drivers. See :ref:`usb.h <usb_header>` for more information on this.
|
|
|
|
Device operation
|
|
================
|
|
|
|
When a device is plugged into the USB bus that matches the device ID
|
|
pattern that your driver registered with the USB core, the probe
|
|
function is called. The :c:type:`usb_device` structure, interface number and
|
|
the interface ID are passed to the function::
|
|
|
|
static int skel_probe(struct usb_interface *interface,
|
|
const struct usb_device_id *id)
|
|
|
|
|
|
The driver now needs to verify that this device is actually one that it
|
|
can accept. If so, it returns 0. If not, or if any error occurs during
|
|
initialization, an errorcode (such as ``-ENOMEM`` or ``-ENODEV``) is
|
|
returned from the probe function.
|
|
|
|
In the skeleton driver, we determine what end points are marked as
|
|
bulk-in and bulk-out. We create buffers to hold the data that will be
|
|
sent and received from the device, and a USB urb to write data to the
|
|
device is initialized.
|
|
|
|
Conversely, when the device is removed from the USB bus, the disconnect
|
|
function is called with the device pointer. The driver needs to clean
|
|
any private data that has been allocated at this time and to shut down
|
|
any pending urbs that are in the USB system.
|
|
|
|
Now that the device is plugged into the system and the driver is bound
|
|
to the device, any of the functions in the :c:type:`file_operations` structure
|
|
that were passed to the USB subsystem will be called from a user program
|
|
trying to talk to the device. The first function called will be open, as
|
|
the program tries to open the device for I/O. We increment our private
|
|
usage count and save a pointer to our internal structure in the file
|
|
structure. This is done so that future calls to file operations will
|
|
enable the driver to determine which device the user is addressing. All
|
|
of this is done with the following code::
|
|
|
|
/* increment our usage count for the device */
|
|
kref_get(&dev->kref);
|
|
|
|
/* save our object in the file's private structure */
|
|
file->private_data = dev;
|
|
|
|
|
|
After the open function is called, the read and write functions are
|
|
called to receive and send data to the device. In the ``skel_write``
|
|
function, we receive a pointer to some data that the user wants to send
|
|
to the device and the size of the data. The function determines how much
|
|
data it can send to the device based on the size of the write urb it has
|
|
created (this size depends on the size of the bulk out end point that
|
|
the device has). Then it copies the data from user space to kernel
|
|
space, points the urb to the data and submits the urb to the USB
|
|
subsystem. This can be seen in the following code::
|
|
|
|
/* we can only write as much as 1 urb will hold */
|
|
size_t writesize = min_t(size_t, count, MAX_TRANSFER);
|
|
|
|
/* copy the data from user space into our urb */
|
|
copy_from_user(buf, user_buffer, writesize);
|
|
|
|
/* set up our urb */
|
|
usb_fill_bulk_urb(urb,
|
|
dev->udev,
|
|
usb_sndbulkpipe(dev->udev, dev->bulk_out_endpointAddr),
|
|
buf,
|
|
writesize,
|
|
skel_write_bulk_callback,
|
|
dev);
|
|
|
|
/* send the data out the bulk port */
|
|
retval = usb_submit_urb(urb, GFP_KERNEL);
|
|
if (retval) {
|
|
dev_err(&dev->interface->dev,
|
|
"%s - failed submitting write urb, error %d\n",
|
|
__func__, retval);
|
|
}
|
|
|
|
|
|
When the write urb is filled up with the proper information using the
|
|
:c:func:`usb_fill_bulk_urb` function, we point the urb's completion callback
|
|
to call our own ``skel_write_bulk_callback`` function. This function is
|
|
called when the urb is finished by the USB subsystem. The callback
|
|
function is called in interrupt context, so caution must be taken not to
|
|
do very much processing at that time. Our implementation of
|
|
``skel_write_bulk_callback`` merely reports if the urb was completed
|
|
successfully or not and then returns.
|
|
|
|
The read function works a bit differently from the write function in
|
|
that we do not use an urb to transfer data from the device to the
|
|
driver. Instead we call the :c:func:`usb_bulk_msg` function, which can be used
|
|
to send or receive data from a device without having to create urbs and
|
|
handle urb completion callback functions. We call the :c:func:`usb_bulk_msg`
|
|
function, giving it a buffer into which to place any data received from
|
|
the device and a timeout value. If the timeout period expires without
|
|
receiving any data from the device, the function will fail and return an
|
|
error message. This can be shown with the following code::
|
|
|
|
/* do an immediate bulk read to get data from the device */
|
|
retval = usb_bulk_msg (skel->dev,
|
|
usb_rcvbulkpipe (skel->dev,
|
|
skel->bulk_in_endpointAddr),
|
|
skel->bulk_in_buffer,
|
|
skel->bulk_in_size,
|
|
&count, 5000);
|
|
/* if the read was successful, copy the data to user space */
|
|
if (!retval) {
|
|
if (copy_to_user (buffer, skel->bulk_in_buffer, count))
|
|
retval = -EFAULT;
|
|
else
|
|
retval = count;
|
|
}
|
|
|
|
|
|
The :c:func:`usb_bulk_msg` function can be very useful for doing single reads
|
|
or writes to a device; however, if you need to read or write constantly to
|
|
a device, it is recommended to set up your own urbs and submit them to
|
|
the USB subsystem.
|
|
|
|
When the user program releases the file handle that it has been using to
|
|
talk to the device, the release function in the driver is called. In
|
|
this function we decrement our private usage count and wait for possible
|
|
pending writes::
|
|
|
|
/* decrement our usage count for the device */
|
|
--skel->open_count;
|
|
|
|
|
|
One of the more difficult problems that USB drivers must be able to
|
|
handle smoothly is the fact that the USB device may be removed from the
|
|
system at any point in time, even if a program is currently talking to
|
|
it. It needs to be able to shut down any current reads and writes and
|
|
notify the user-space programs that the device is no longer there. The
|
|
following code (function ``skel_delete``) is an example of how to do
|
|
this::
|
|
|
|
static inline void skel_delete (struct usb_skel *dev)
|
|
{
|
|
kfree (dev->bulk_in_buffer);
|
|
if (dev->bulk_out_buffer != NULL)
|
|
usb_free_coherent (dev->udev, dev->bulk_out_size,
|
|
dev->bulk_out_buffer,
|
|
dev->write_urb->transfer_dma);
|
|
usb_free_urb (dev->write_urb);
|
|
kfree (dev);
|
|
}
|
|
|
|
|
|
If a program currently has an open handle to the device, we reset the
|
|
flag ``device_present``. For every read, write, release and other
|
|
functions that expect a device to be present, the driver first checks
|
|
this flag to see if the device is still present. If not, it releases
|
|
that the device has disappeared, and a ``-ENODEV`` error is returned to the
|
|
user-space program. When the release function is eventually called, it
|
|
determines if there is no device and if not, it does the cleanup that
|
|
the ``skel_disconnect`` function normally does if there are no open files
|
|
on the device (see Listing 5).
|
|
|
|
Isochronous Data
|
|
================
|
|
|
|
This usb-skeleton driver does not have any examples of interrupt or
|
|
isochronous data being sent to or from the device. Interrupt data is
|
|
sent almost exactly as bulk data is, with a few minor exceptions.
|
|
Isochronous data works differently with continuous streams of data being
|
|
sent to or from the device. The audio and video camera drivers are very
|
|
good examples of drivers that handle isochronous data and will be useful
|
|
if you also need to do this.
|
|
|
|
Conclusion
|
|
==========
|
|
|
|
Writing Linux USB device drivers is not a difficult task as the
|
|
usb-skeleton driver shows. This driver, combined with the other current
|
|
USB drivers, should provide enough examples to help a beginning author
|
|
create a working driver in a minimal amount of time. The linux-usb-devel
|
|
mailing list archives also contain a lot of helpful information.
|
|
|
|
Resources
|
|
=========
|
|
|
|
The Linux USB Project:
|
|
http://www.linux-usb.org/
|
|
|
|
Linux Hotplug Project:
|
|
http://linux-hotplug.sourceforge.net/
|
|
|
|
linux-usb Mailing List Archives:
|
|
https://lore.kernel.org/linux-usb/
|
|
|
|
Programming Guide for Linux USB Device Drivers:
|
|
https://lmu.web.psi.ch/docu/manuals/software_manuals/linux_sl/usb_linux_programming_guide.pdf
|
|
|
|
USB Home Page: https://www.usb.org
|