449 lines
10 KiB
C
449 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* tdo24m - SPI-based drivers for Toppoly TDO24M series LCD panels
|
|
*
|
|
* Copyright (C) 2008 Marvell International Ltd.
|
|
* Eric Miao <eric.miao@marvell.com>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/tdo24m.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/lcd.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
|
|
|
|
#define TDO24M_SPI_BUFF_SIZE (4)
|
|
#define MODE_QVGA 0
|
|
#define MODE_VGA 1
|
|
|
|
struct tdo24m {
|
|
struct spi_device *spi_dev;
|
|
struct lcd_device *lcd_dev;
|
|
|
|
struct spi_message msg;
|
|
struct spi_transfer xfer;
|
|
uint8_t *buf;
|
|
|
|
int (*adj_mode)(struct tdo24m *lcd, int mode);
|
|
int color_invert;
|
|
|
|
int power;
|
|
int mode;
|
|
};
|
|
|
|
/* use bit 30, 31 as the indicator of command parameter number */
|
|
#define CMD0(x) ((0 << 30) | (x))
|
|
#define CMD1(x, x1) ((1 << 30) | ((x) << 9) | 0x100 | (x1))
|
|
#define CMD2(x, x1, x2) ((2 << 30) | ((x) << 18) | 0x20000 |\
|
|
((x1) << 9) | 0x100 | (x2))
|
|
#define CMD_NULL (-1)
|
|
|
|
static const uint32_t lcd_panel_reset[] = {
|
|
CMD0(0x1), /* reset */
|
|
CMD0(0x0), /* nop */
|
|
CMD0(0x0), /* nop */
|
|
CMD0(0x0), /* nop */
|
|
CMD_NULL,
|
|
};
|
|
|
|
static const uint32_t lcd_panel_on[] = {
|
|
CMD0(0x29), /* Display ON */
|
|
CMD2(0xB8, 0xFF, 0xF9), /* Output Control */
|
|
CMD0(0x11), /* Sleep out */
|
|
CMD1(0xB0, 0x16), /* Wake */
|
|
CMD_NULL,
|
|
};
|
|
|
|
static const uint32_t lcd_panel_off[] = {
|
|
CMD0(0x28), /* Display OFF */
|
|
CMD2(0xB8, 0x80, 0x02), /* Output Control */
|
|
CMD0(0x10), /* Sleep in */
|
|
CMD1(0xB0, 0x00), /* Deep stand by in */
|
|
CMD_NULL,
|
|
};
|
|
|
|
static const uint32_t lcd_vga_pass_through_tdo24m[] = {
|
|
CMD1(0xB0, 0x16),
|
|
CMD1(0xBC, 0x80),
|
|
CMD1(0xE1, 0x00),
|
|
CMD1(0x36, 0x50),
|
|
CMD1(0x3B, 0x00),
|
|
CMD_NULL,
|
|
};
|
|
|
|
static const uint32_t lcd_qvga_pass_through_tdo24m[] = {
|
|
CMD1(0xB0, 0x16),
|
|
CMD1(0xBC, 0x81),
|
|
CMD1(0xE1, 0x00),
|
|
CMD1(0x36, 0x50),
|
|
CMD1(0x3B, 0x22),
|
|
CMD_NULL,
|
|
};
|
|
|
|
static const uint32_t lcd_vga_transfer_tdo24m[] = {
|
|
CMD1(0xcf, 0x02), /* Blanking period control (1) */
|
|
CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */
|
|
CMD1(0xd1, 0x01), /* CKV timing control on/off */
|
|
CMD2(0xd2, 0x14, 0x00), /* CKV 1,2 timing control */
|
|
CMD2(0xd3, 0x1a, 0x0f), /* OEV timing control */
|
|
CMD2(0xd4, 0x1f, 0xaf), /* ASW timing control (1) */
|
|
CMD1(0xd5, 0x14), /* ASW timing control (2) */
|
|
CMD0(0x21), /* Invert for normally black display */
|
|
CMD0(0x29), /* Display on */
|
|
CMD_NULL,
|
|
};
|
|
|
|
static const uint32_t lcd_qvga_transfer[] = {
|
|
CMD1(0xd6, 0x02), /* Blanking period control (1) */
|
|
CMD2(0xd7, 0x08, 0x04), /* Blanking period control (2) */
|
|
CMD1(0xd8, 0x01), /* CKV timing control on/off */
|
|
CMD2(0xd9, 0x00, 0x08), /* CKV 1,2 timing control */
|
|
CMD2(0xde, 0x05, 0x0a), /* OEV timing control */
|
|
CMD2(0xdf, 0x0a, 0x19), /* ASW timing control (1) */
|
|
CMD1(0xe0, 0x0a), /* ASW timing control (2) */
|
|
CMD0(0x21), /* Invert for normally black display */
|
|
CMD0(0x29), /* Display on */
|
|
CMD_NULL,
|
|
};
|
|
|
|
static const uint32_t lcd_vga_pass_through_tdo35s[] = {
|
|
CMD1(0xB0, 0x16),
|
|
CMD1(0xBC, 0x80),
|
|
CMD1(0xE1, 0x00),
|
|
CMD1(0x3B, 0x00),
|
|
CMD_NULL,
|
|
};
|
|
|
|
static const uint32_t lcd_qvga_pass_through_tdo35s[] = {
|
|
CMD1(0xB0, 0x16),
|
|
CMD1(0xBC, 0x81),
|
|
CMD1(0xE1, 0x00),
|
|
CMD1(0x3B, 0x22),
|
|
CMD_NULL,
|
|
};
|
|
|
|
static const uint32_t lcd_vga_transfer_tdo35s[] = {
|
|
CMD1(0xcf, 0x02), /* Blanking period control (1) */
|
|
CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */
|
|
CMD1(0xd1, 0x01), /* CKV timing control on/off */
|
|
CMD2(0xd2, 0x00, 0x1e), /* CKV 1,2 timing control */
|
|
CMD2(0xd3, 0x14, 0x28), /* OEV timing control */
|
|
CMD2(0xd4, 0x28, 0x64), /* ASW timing control (1) */
|
|
CMD1(0xd5, 0x28), /* ASW timing control (2) */
|
|
CMD0(0x21), /* Invert for normally black display */
|
|
CMD0(0x29), /* Display on */
|
|
CMD_NULL,
|
|
};
|
|
|
|
static const uint32_t lcd_panel_config[] = {
|
|
CMD2(0xb8, 0xff, 0xf9), /* Output control */
|
|
CMD0(0x11), /* sleep out */
|
|
CMD1(0xba, 0x01), /* Display mode (1) */
|
|
CMD1(0xbb, 0x00), /* Display mode (2) */
|
|
CMD1(0x3a, 0x60), /* Display mode 18-bit RGB */
|
|
CMD1(0xbf, 0x10), /* Drive system change control */
|
|
CMD1(0xb1, 0x56), /* Booster operation setup */
|
|
CMD1(0xb2, 0x33), /* Booster mode setup */
|
|
CMD1(0xb3, 0x11), /* Booster frequency setup */
|
|
CMD1(0xb4, 0x02), /* Op amp/system clock */
|
|
CMD1(0xb5, 0x35), /* VCS voltage */
|
|
CMD1(0xb6, 0x40), /* VCOM voltage */
|
|
CMD1(0xb7, 0x03), /* External display signal */
|
|
CMD1(0xbd, 0x00), /* ASW slew rate */
|
|
CMD1(0xbe, 0x00), /* Dummy data for QuadData operation */
|
|
CMD1(0xc0, 0x11), /* Sleep out FR count (A) */
|
|
CMD1(0xc1, 0x11), /* Sleep out FR count (B) */
|
|
CMD1(0xc2, 0x11), /* Sleep out FR count (C) */
|
|
CMD2(0xc3, 0x20, 0x40), /* Sleep out FR count (D) */
|
|
CMD2(0xc4, 0x60, 0xc0), /* Sleep out FR count (E) */
|
|
CMD2(0xc5, 0x10, 0x20), /* Sleep out FR count (F) */
|
|
CMD1(0xc6, 0xc0), /* Sleep out FR count (G) */
|
|
CMD2(0xc7, 0x33, 0x43), /* Gamma 1 fine tuning (1) */
|
|
CMD1(0xc8, 0x44), /* Gamma 1 fine tuning (2) */
|
|
CMD1(0xc9, 0x33), /* Gamma 1 inclination adjustment */
|
|
CMD1(0xca, 0x00), /* Gamma 1 blue offset adjustment */
|
|
CMD2(0xec, 0x01, 0xf0), /* Horizontal clock cycles */
|
|
CMD_NULL,
|
|
};
|
|
|
|
static int tdo24m_writes(struct tdo24m *lcd, const uint32_t *array)
|
|
{
|
|
struct spi_transfer *x = &lcd->xfer;
|
|
const uint32_t *p = array;
|
|
uint32_t data;
|
|
int nparams, err = 0;
|
|
|
|
for (; *p != CMD_NULL; p++) {
|
|
if (!lcd->color_invert && *p == CMD0(0x21))
|
|
continue;
|
|
|
|
nparams = (*p >> 30) & 0x3;
|
|
|
|
data = *p << (7 - nparams);
|
|
switch (nparams) {
|
|
case 0:
|
|
lcd->buf[0] = (data >> 8) & 0xff;
|
|
lcd->buf[1] = data & 0xff;
|
|
break;
|
|
case 1:
|
|
lcd->buf[0] = (data >> 16) & 0xff;
|
|
lcd->buf[1] = (data >> 8) & 0xff;
|
|
lcd->buf[2] = data & 0xff;
|
|
break;
|
|
case 2:
|
|
lcd->buf[0] = (data >> 24) & 0xff;
|
|
lcd->buf[1] = (data >> 16) & 0xff;
|
|
lcd->buf[2] = (data >> 8) & 0xff;
|
|
lcd->buf[3] = data & 0xff;
|
|
break;
|
|
default:
|
|
continue;
|
|
}
|
|
x->len = nparams + 2;
|
|
err = spi_sync(lcd->spi_dev, &lcd->msg);
|
|
if (err)
|
|
break;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int tdo24m_adj_mode(struct tdo24m *lcd, int mode)
|
|
{
|
|
switch (mode) {
|
|
case MODE_VGA:
|
|
tdo24m_writes(lcd, lcd_vga_pass_through_tdo24m);
|
|
tdo24m_writes(lcd, lcd_panel_config);
|
|
tdo24m_writes(lcd, lcd_vga_transfer_tdo24m);
|
|
break;
|
|
case MODE_QVGA:
|
|
tdo24m_writes(lcd, lcd_qvga_pass_through_tdo24m);
|
|
tdo24m_writes(lcd, lcd_panel_config);
|
|
tdo24m_writes(lcd, lcd_qvga_transfer);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
lcd->mode = mode;
|
|
return 0;
|
|
}
|
|
|
|
static int tdo35s_adj_mode(struct tdo24m *lcd, int mode)
|
|
{
|
|
switch (mode) {
|
|
case MODE_VGA:
|
|
tdo24m_writes(lcd, lcd_vga_pass_through_tdo35s);
|
|
tdo24m_writes(lcd, lcd_panel_config);
|
|
tdo24m_writes(lcd, lcd_vga_transfer_tdo35s);
|
|
break;
|
|
case MODE_QVGA:
|
|
tdo24m_writes(lcd, lcd_qvga_pass_through_tdo35s);
|
|
tdo24m_writes(lcd, lcd_panel_config);
|
|
tdo24m_writes(lcd, lcd_qvga_transfer);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
lcd->mode = mode;
|
|
return 0;
|
|
}
|
|
|
|
static int tdo24m_power_on(struct tdo24m *lcd)
|
|
{
|
|
int err;
|
|
|
|
err = tdo24m_writes(lcd, lcd_panel_on);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = tdo24m_writes(lcd, lcd_panel_reset);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = lcd->adj_mode(lcd, lcd->mode);
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int tdo24m_power_off(struct tdo24m *lcd)
|
|
{
|
|
return tdo24m_writes(lcd, lcd_panel_off);
|
|
}
|
|
|
|
static int tdo24m_power(struct tdo24m *lcd, int power)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
|
|
ret = tdo24m_power_on(lcd);
|
|
else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
|
|
ret = tdo24m_power_off(lcd);
|
|
|
|
if (!ret)
|
|
lcd->power = power;
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
static int tdo24m_set_power(struct lcd_device *ld, int power)
|
|
{
|
|
struct tdo24m *lcd = lcd_get_data(ld);
|
|
|
|
return tdo24m_power(lcd, power);
|
|
}
|
|
|
|
static int tdo24m_get_power(struct lcd_device *ld)
|
|
{
|
|
struct tdo24m *lcd = lcd_get_data(ld);
|
|
|
|
return lcd->power;
|
|
}
|
|
|
|
static int tdo24m_set_mode(struct lcd_device *ld, struct fb_videomode *m)
|
|
{
|
|
struct tdo24m *lcd = lcd_get_data(ld);
|
|
int mode = MODE_QVGA;
|
|
|
|
if (m->xres == 640 || m->xres == 480)
|
|
mode = MODE_VGA;
|
|
|
|
if (lcd->mode == mode)
|
|
return 0;
|
|
|
|
return lcd->adj_mode(lcd, mode);
|
|
}
|
|
|
|
static struct lcd_ops tdo24m_ops = {
|
|
.get_power = tdo24m_get_power,
|
|
.set_power = tdo24m_set_power,
|
|
.set_mode = tdo24m_set_mode,
|
|
};
|
|
|
|
static int tdo24m_probe(struct spi_device *spi)
|
|
{
|
|
struct tdo24m *lcd;
|
|
struct spi_message *m;
|
|
struct spi_transfer *x;
|
|
struct tdo24m_platform_data *pdata;
|
|
enum tdo24m_model model;
|
|
int err;
|
|
|
|
pdata = dev_get_platdata(&spi->dev);
|
|
if (pdata)
|
|
model = pdata->model;
|
|
else
|
|
model = TDO24M;
|
|
|
|
spi->bits_per_word = 8;
|
|
spi->mode = SPI_MODE_3;
|
|
err = spi_setup(spi);
|
|
if (err)
|
|
return err;
|
|
|
|
lcd = devm_kzalloc(&spi->dev, sizeof(struct tdo24m), GFP_KERNEL);
|
|
if (!lcd)
|
|
return -ENOMEM;
|
|
|
|
lcd->spi_dev = spi;
|
|
lcd->power = FB_BLANK_POWERDOWN;
|
|
lcd->mode = MODE_VGA; /* default to VGA */
|
|
|
|
lcd->buf = devm_kzalloc(&spi->dev, TDO24M_SPI_BUFF_SIZE, GFP_KERNEL);
|
|
if (lcd->buf == NULL)
|
|
return -ENOMEM;
|
|
|
|
m = &lcd->msg;
|
|
x = &lcd->xfer;
|
|
|
|
spi_message_init(m);
|
|
|
|
x->cs_change = 0;
|
|
x->tx_buf = &lcd->buf[0];
|
|
spi_message_add_tail(x, m);
|
|
|
|
switch (model) {
|
|
case TDO24M:
|
|
lcd->color_invert = 1;
|
|
lcd->adj_mode = tdo24m_adj_mode;
|
|
break;
|
|
case TDO35S:
|
|
lcd->adj_mode = tdo35s_adj_mode;
|
|
lcd->color_invert = 0;
|
|
break;
|
|
default:
|
|
dev_err(&spi->dev, "Unsupported model");
|
|
return -EINVAL;
|
|
}
|
|
|
|
lcd->lcd_dev = devm_lcd_device_register(&spi->dev, "tdo24m", &spi->dev,
|
|
lcd, &tdo24m_ops);
|
|
if (IS_ERR(lcd->lcd_dev))
|
|
return PTR_ERR(lcd->lcd_dev);
|
|
|
|
spi_set_drvdata(spi, lcd);
|
|
err = tdo24m_power(lcd, FB_BLANK_UNBLANK);
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tdo24m_remove(struct spi_device *spi)
|
|
{
|
|
struct tdo24m *lcd = spi_get_drvdata(spi);
|
|
|
|
tdo24m_power(lcd, FB_BLANK_POWERDOWN);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int tdo24m_suspend(struct device *dev)
|
|
{
|
|
struct tdo24m *lcd = dev_get_drvdata(dev);
|
|
|
|
return tdo24m_power(lcd, FB_BLANK_POWERDOWN);
|
|
}
|
|
|
|
static int tdo24m_resume(struct device *dev)
|
|
{
|
|
struct tdo24m *lcd = dev_get_drvdata(dev);
|
|
|
|
return tdo24m_power(lcd, FB_BLANK_UNBLANK);
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(tdo24m_pm_ops, tdo24m_suspend, tdo24m_resume);
|
|
|
|
/* Power down all displays on reboot, poweroff or halt */
|
|
static void tdo24m_shutdown(struct spi_device *spi)
|
|
{
|
|
struct tdo24m *lcd = spi_get_drvdata(spi);
|
|
|
|
tdo24m_power(lcd, FB_BLANK_POWERDOWN);
|
|
}
|
|
|
|
static struct spi_driver tdo24m_driver = {
|
|
.driver = {
|
|
.name = "tdo24m",
|
|
.pm = &tdo24m_pm_ops,
|
|
},
|
|
.probe = tdo24m_probe,
|
|
.remove = tdo24m_remove,
|
|
.shutdown = tdo24m_shutdown,
|
|
};
|
|
|
|
module_spi_driver(tdo24m_driver);
|
|
|
|
MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
|
|
MODULE_DESCRIPTION("Driver for Toppoly TDO24M LCD Panel");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("spi:tdo24m");
|