427 lines
10 KiB
C
427 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Simple driver for Texas Instruments LM3639 Backlight + Flash LED driver chip
|
|
* Copyright (C) 2012 Texas Instruments
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/backlight.h>
|
|
#include <linux/err.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/platform_data/lm3639_bl.h>
|
|
|
|
#define REG_DEV_ID 0x00
|
|
#define REG_CHECKSUM 0x01
|
|
#define REG_BL_CONF_1 0x02
|
|
#define REG_BL_CONF_2 0x03
|
|
#define REG_BL_CONF_3 0x04
|
|
#define REG_BL_CONF_4 0x05
|
|
#define REG_FL_CONF_1 0x06
|
|
#define REG_FL_CONF_2 0x07
|
|
#define REG_FL_CONF_3 0x08
|
|
#define REG_IO_CTRL 0x09
|
|
#define REG_ENABLE 0x0A
|
|
#define REG_FLAG 0x0B
|
|
#define REG_MAX REG_FLAG
|
|
|
|
struct lm3639_chip_data {
|
|
struct device *dev;
|
|
struct lm3639_platform_data *pdata;
|
|
|
|
struct backlight_device *bled;
|
|
struct led_classdev cdev_flash;
|
|
struct led_classdev cdev_torch;
|
|
struct regmap *regmap;
|
|
|
|
unsigned int bled_mode;
|
|
unsigned int bled_map;
|
|
unsigned int last_flag;
|
|
};
|
|
|
|
/* initialize chip */
|
|
static int lm3639_chip_init(struct lm3639_chip_data *pchip)
|
|
{
|
|
int ret;
|
|
unsigned int reg_val;
|
|
struct lm3639_platform_data *pdata = pchip->pdata;
|
|
|
|
/* input pins config. */
|
|
ret =
|
|
regmap_update_bits(pchip->regmap, REG_BL_CONF_1, 0x08,
|
|
pdata->pin_pwm);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
reg_val = (pdata->pin_pwm & 0x40) | pdata->pin_strobe | pdata->pin_tx;
|
|
ret = regmap_update_bits(pchip->regmap, REG_IO_CTRL, 0x7C, reg_val);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
/* init brightness */
|
|
ret = regmap_write(pchip->regmap, REG_BL_CONF_4, pdata->init_brt_led);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
ret = regmap_write(pchip->regmap, REG_BL_CONF_3, pdata->init_brt_led);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
/* output pins config. */
|
|
if (!pdata->init_brt_led) {
|
|
reg_val = pdata->fled_pins;
|
|
reg_val |= pdata->bled_pins;
|
|
} else {
|
|
reg_val = pdata->fled_pins;
|
|
reg_val |= pdata->bled_pins | 0x01;
|
|
}
|
|
|
|
ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x79, reg_val);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
return ret;
|
|
out:
|
|
dev_err(pchip->dev, "i2c failed to access register\n");
|
|
return ret;
|
|
}
|
|
|
|
/* update and get brightness */
|
|
static int lm3639_bled_update_status(struct backlight_device *bl)
|
|
{
|
|
int ret;
|
|
unsigned int reg_val;
|
|
struct lm3639_chip_data *pchip = bl_get_data(bl);
|
|
struct lm3639_platform_data *pdata = pchip->pdata;
|
|
|
|
ret = regmap_read(pchip->regmap, REG_FLAG, ®_val);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
if (reg_val != 0)
|
|
dev_info(pchip->dev, "last flag is 0x%x\n", reg_val);
|
|
|
|
/* pwm control */
|
|
if (pdata->pin_pwm) {
|
|
if (pdata->pwm_set_intensity)
|
|
pdata->pwm_set_intensity(bl->props.brightness,
|
|
pdata->max_brt_led);
|
|
else
|
|
dev_err(pchip->dev,
|
|
"No pwm control func. in plat-data\n");
|
|
return bl->props.brightness;
|
|
}
|
|
|
|
/* i2c control and set brigtness */
|
|
ret = regmap_write(pchip->regmap, REG_BL_CONF_4, bl->props.brightness);
|
|
if (ret < 0)
|
|
goto out;
|
|
ret = regmap_write(pchip->regmap, REG_BL_CONF_3, bl->props.brightness);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
if (!bl->props.brightness)
|
|
ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x01, 0x00);
|
|
else
|
|
ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x01, 0x01);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
return bl->props.brightness;
|
|
out:
|
|
dev_err(pchip->dev, "i2c failed to access registers\n");
|
|
return bl->props.brightness;
|
|
}
|
|
|
|
static int lm3639_bled_get_brightness(struct backlight_device *bl)
|
|
{
|
|
int ret;
|
|
unsigned int reg_val;
|
|
struct lm3639_chip_data *pchip = bl_get_data(bl);
|
|
struct lm3639_platform_data *pdata = pchip->pdata;
|
|
|
|
if (pdata->pin_pwm) {
|
|
if (pdata->pwm_get_intensity)
|
|
bl->props.brightness = pdata->pwm_get_intensity();
|
|
else
|
|
dev_err(pchip->dev,
|
|
"No pwm control func. in plat-data\n");
|
|
return bl->props.brightness;
|
|
}
|
|
|
|
ret = regmap_read(pchip->regmap, REG_BL_CONF_1, ®_val);
|
|
if (ret < 0)
|
|
goto out;
|
|
if (reg_val & 0x10)
|
|
ret = regmap_read(pchip->regmap, REG_BL_CONF_4, ®_val);
|
|
else
|
|
ret = regmap_read(pchip->regmap, REG_BL_CONF_3, ®_val);
|
|
if (ret < 0)
|
|
goto out;
|
|
bl->props.brightness = reg_val;
|
|
|
|
return bl->props.brightness;
|
|
out:
|
|
dev_err(pchip->dev, "i2c failed to access register\n");
|
|
return bl->props.brightness;
|
|
}
|
|
|
|
static const struct backlight_ops lm3639_bled_ops = {
|
|
.options = BL_CORE_SUSPENDRESUME,
|
|
.update_status = lm3639_bled_update_status,
|
|
.get_brightness = lm3639_bled_get_brightness,
|
|
};
|
|
|
|
/* backlight mapping mode */
|
|
static ssize_t lm3639_bled_mode_store(struct device *dev,
|
|
struct device_attribute *devAttr,
|
|
const char *buf, size_t size)
|
|
{
|
|
ssize_t ret;
|
|
struct lm3639_chip_data *pchip = dev_get_drvdata(dev);
|
|
unsigned int state;
|
|
|
|
ret = kstrtouint(buf, 10, &state);
|
|
if (ret)
|
|
goto out_input;
|
|
|
|
if (!state)
|
|
ret =
|
|
regmap_update_bits(pchip->regmap, REG_BL_CONF_1, 0x10,
|
|
0x00);
|
|
else
|
|
ret =
|
|
regmap_update_bits(pchip->regmap, REG_BL_CONF_1, 0x10,
|
|
0x10);
|
|
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
return size;
|
|
|
|
out:
|
|
dev_err(pchip->dev, "%s:i2c access fail to register\n", __func__);
|
|
return ret;
|
|
|
|
out_input:
|
|
dev_err(pchip->dev, "%s:input conversion fail\n", __func__);
|
|
return ret;
|
|
|
|
}
|
|
|
|
static DEVICE_ATTR(bled_mode, S_IWUSR, NULL, lm3639_bled_mode_store);
|
|
|
|
/* torch */
|
|
static void lm3639_torch_brightness_set(struct led_classdev *cdev,
|
|
enum led_brightness brightness)
|
|
{
|
|
int ret;
|
|
unsigned int reg_val;
|
|
struct lm3639_chip_data *pchip;
|
|
|
|
pchip = container_of(cdev, struct lm3639_chip_data, cdev_torch);
|
|
|
|
ret = regmap_read(pchip->regmap, REG_FLAG, ®_val);
|
|
if (ret < 0)
|
|
goto out;
|
|
if (reg_val != 0)
|
|
dev_info(pchip->dev, "last flag is 0x%x\n", reg_val);
|
|
|
|
/* brightness 0 means off state */
|
|
if (!brightness) {
|
|
ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x00);
|
|
if (ret < 0)
|
|
goto out;
|
|
return;
|
|
}
|
|
|
|
ret = regmap_update_bits(pchip->regmap,
|
|
REG_FL_CONF_1, 0x70, (brightness - 1) << 4);
|
|
if (ret < 0)
|
|
goto out;
|
|
ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x02);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
return;
|
|
out:
|
|
dev_err(pchip->dev, "i2c failed to access register\n");
|
|
}
|
|
|
|
/* flash */
|
|
static void lm3639_flash_brightness_set(struct led_classdev *cdev,
|
|
enum led_brightness brightness)
|
|
{
|
|
int ret;
|
|
unsigned int reg_val;
|
|
struct lm3639_chip_data *pchip;
|
|
|
|
pchip = container_of(cdev, struct lm3639_chip_data, cdev_flash);
|
|
|
|
ret = regmap_read(pchip->regmap, REG_FLAG, ®_val);
|
|
if (ret < 0)
|
|
goto out;
|
|
if (reg_val != 0)
|
|
dev_info(pchip->dev, "last flag is 0x%x\n", reg_val);
|
|
|
|
/* torch off before flash control */
|
|
ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x00);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
/* brightness 0 means off state */
|
|
if (!brightness)
|
|
return;
|
|
|
|
ret = regmap_update_bits(pchip->regmap,
|
|
REG_FL_CONF_1, 0x0F, brightness - 1);
|
|
if (ret < 0)
|
|
goto out;
|
|
ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x06);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
return;
|
|
out:
|
|
dev_err(pchip->dev, "i2c failed to access register\n");
|
|
}
|
|
|
|
static const struct regmap_config lm3639_regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = REG_MAX,
|
|
};
|
|
|
|
static int lm3639_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
int ret;
|
|
struct lm3639_chip_data *pchip;
|
|
struct lm3639_platform_data *pdata = dev_get_platdata(&client->dev);
|
|
struct backlight_properties props;
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
|
|
dev_err(&client->dev, "i2c functionality check fail.\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (pdata == NULL) {
|
|
dev_err(&client->dev, "Needs Platform Data.\n");
|
|
return -ENODATA;
|
|
}
|
|
|
|
pchip = devm_kzalloc(&client->dev,
|
|
sizeof(struct lm3639_chip_data), GFP_KERNEL);
|
|
if (!pchip)
|
|
return -ENOMEM;
|
|
|
|
pchip->pdata = pdata;
|
|
pchip->dev = &client->dev;
|
|
|
|
pchip->regmap = devm_regmap_init_i2c(client, &lm3639_regmap);
|
|
if (IS_ERR(pchip->regmap)) {
|
|
ret = PTR_ERR(pchip->regmap);
|
|
dev_err(&client->dev, "fail : allocate register map: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
i2c_set_clientdata(client, pchip);
|
|
|
|
/* chip initialize */
|
|
ret = lm3639_chip_init(pchip);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "fail : chip init\n");
|
|
goto err_out;
|
|
}
|
|
|
|
/* backlight */
|
|
props.type = BACKLIGHT_RAW;
|
|
props.brightness = pdata->init_brt_led;
|
|
props.max_brightness = pdata->max_brt_led;
|
|
pchip->bled =
|
|
devm_backlight_device_register(pchip->dev, "lm3639_bled",
|
|
pchip->dev, pchip, &lm3639_bled_ops,
|
|
&props);
|
|
if (IS_ERR(pchip->bled)) {
|
|
dev_err(&client->dev, "fail : backlight register\n");
|
|
ret = PTR_ERR(pchip->bled);
|
|
goto err_out;
|
|
}
|
|
|
|
ret = device_create_file(&(pchip->bled->dev), &dev_attr_bled_mode);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "failed : add sysfs entries\n");
|
|
goto err_out;
|
|
}
|
|
|
|
/* flash */
|
|
pchip->cdev_flash.name = "lm3639_flash";
|
|
pchip->cdev_flash.max_brightness = 16;
|
|
pchip->cdev_flash.brightness_set = lm3639_flash_brightness_set;
|
|
ret = led_classdev_register((struct device *)
|
|
&client->dev, &pchip->cdev_flash);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "fail : flash register\n");
|
|
goto err_flash;
|
|
}
|
|
|
|
/* torch */
|
|
pchip->cdev_torch.name = "lm3639_torch";
|
|
pchip->cdev_torch.max_brightness = 8;
|
|
pchip->cdev_torch.brightness_set = lm3639_torch_brightness_set;
|
|
ret = led_classdev_register((struct device *)
|
|
&client->dev, &pchip->cdev_torch);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "fail : torch register\n");
|
|
goto err_torch;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_torch:
|
|
led_classdev_unregister(&pchip->cdev_flash);
|
|
err_flash:
|
|
device_remove_file(&(pchip->bled->dev), &dev_attr_bled_mode);
|
|
err_out:
|
|
return ret;
|
|
}
|
|
|
|
static int lm3639_remove(struct i2c_client *client)
|
|
{
|
|
struct lm3639_chip_data *pchip = i2c_get_clientdata(client);
|
|
|
|
regmap_write(pchip->regmap, REG_ENABLE, 0x00);
|
|
|
|
led_classdev_unregister(&pchip->cdev_torch);
|
|
led_classdev_unregister(&pchip->cdev_flash);
|
|
if (pchip->bled)
|
|
device_remove_file(&(pchip->bled->dev), &dev_attr_bled_mode);
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id lm3639_id[] = {
|
|
{LM3639_NAME, 0},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, lm3639_id);
|
|
static struct i2c_driver lm3639_i2c_driver = {
|
|
.driver = {
|
|
.name = LM3639_NAME,
|
|
},
|
|
.probe = lm3639_probe,
|
|
.remove = lm3639_remove,
|
|
.id_table = lm3639_id,
|
|
};
|
|
|
|
module_i2c_driver(lm3639_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("Texas Instruments Backlight+Flash LED driver for LM3639");
|
|
MODULE_AUTHOR("Daniel Jeong <gshark.jeong@gmail.com>");
|
|
MODULE_AUTHOR("Ldd Mlp <ldd-mlp@list.ti.com>");
|
|
MODULE_LICENSE("GPL v2");
|