632 lines
16 KiB
C
632 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Simple driver for Texas Instruments LM3630A Backlight driver chip
|
|
* Copyright (C) 2012 Texas Instruments
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/backlight.h>
|
|
#include <linux/err.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/platform_data/lm3630a_bl.h>
|
|
|
|
#define REG_CTRL 0x00
|
|
#define REG_BOOST 0x02
|
|
#define REG_CONFIG 0x01
|
|
#define REG_BRT_A 0x03
|
|
#define REG_BRT_B 0x04
|
|
#define REG_I_A 0x05
|
|
#define REG_I_B 0x06
|
|
#define REG_INT_STATUS 0x09
|
|
#define REG_INT_EN 0x0A
|
|
#define REG_FAULT 0x0B
|
|
#define REG_PWM_OUTLOW 0x12
|
|
#define REG_PWM_OUTHIGH 0x13
|
|
#define REG_FILTER_STRENGTH 0x50
|
|
#define REG_MAX 0x50
|
|
|
|
#define INT_DEBOUNCE_MSEC 10
|
|
|
|
#define LM3630A_BANK_0 0
|
|
#define LM3630A_BANK_1 1
|
|
|
|
#define LM3630A_NUM_SINKS 2
|
|
#define LM3630A_SINK_0 0
|
|
#define LM3630A_SINK_1 1
|
|
|
|
struct lm3630a_chip {
|
|
struct device *dev;
|
|
struct delayed_work work;
|
|
|
|
int irq;
|
|
struct workqueue_struct *irqthread;
|
|
struct lm3630a_platform_data *pdata;
|
|
struct backlight_device *bleda;
|
|
struct backlight_device *bledb;
|
|
struct gpio_desc *enable_gpio;
|
|
struct regmap *regmap;
|
|
struct pwm_device *pwmd;
|
|
struct pwm_state pwmd_state;
|
|
};
|
|
|
|
/* i2c access */
|
|
static int lm3630a_read(struct lm3630a_chip *pchip, unsigned int reg)
|
|
{
|
|
int rval;
|
|
unsigned int reg_val;
|
|
|
|
rval = regmap_read(pchip->regmap, reg, ®_val);
|
|
if (rval < 0)
|
|
return rval;
|
|
return reg_val & 0xFF;
|
|
}
|
|
|
|
static int lm3630a_write(struct lm3630a_chip *pchip,
|
|
unsigned int reg, unsigned int data)
|
|
{
|
|
return regmap_write(pchip->regmap, reg, data);
|
|
}
|
|
|
|
static int lm3630a_update(struct lm3630a_chip *pchip,
|
|
unsigned int reg, unsigned int mask,
|
|
unsigned int data)
|
|
{
|
|
return regmap_update_bits(pchip->regmap, reg, mask, data);
|
|
}
|
|
|
|
/* initialize chip */
|
|
static int lm3630a_chip_init(struct lm3630a_chip *pchip)
|
|
{
|
|
int rval;
|
|
struct lm3630a_platform_data *pdata = pchip->pdata;
|
|
|
|
usleep_range(1000, 2000);
|
|
/* set Filter Strength Register */
|
|
rval = lm3630a_write(pchip, REG_FILTER_STRENGTH, 0x03);
|
|
/* set Cofig. register */
|
|
rval |= lm3630a_update(pchip, REG_CONFIG, 0x07, pdata->pwm_ctrl);
|
|
/* set boost control */
|
|
rval |= lm3630a_write(pchip, REG_BOOST, 0x38);
|
|
/* set current A */
|
|
rval |= lm3630a_update(pchip, REG_I_A, 0x1F, 0x1F);
|
|
/* set current B */
|
|
rval |= lm3630a_write(pchip, REG_I_B, 0x1F);
|
|
/* set control */
|
|
rval |= lm3630a_update(pchip, REG_CTRL, 0x14, pdata->leda_ctrl);
|
|
rval |= lm3630a_update(pchip, REG_CTRL, 0x0B, pdata->ledb_ctrl);
|
|
usleep_range(1000, 2000);
|
|
/* set brightness A and B */
|
|
rval |= lm3630a_write(pchip, REG_BRT_A, pdata->leda_init_brt);
|
|
rval |= lm3630a_write(pchip, REG_BRT_B, pdata->ledb_init_brt);
|
|
|
|
if (rval < 0)
|
|
dev_err(pchip->dev, "i2c failed to access register\n");
|
|
return rval;
|
|
}
|
|
|
|
/* interrupt handling */
|
|
static void lm3630a_delayed_func(struct work_struct *work)
|
|
{
|
|
int rval;
|
|
struct lm3630a_chip *pchip;
|
|
|
|
pchip = container_of(work, struct lm3630a_chip, work.work);
|
|
|
|
rval = lm3630a_read(pchip, REG_INT_STATUS);
|
|
if (rval < 0) {
|
|
dev_err(pchip->dev,
|
|
"i2c failed to access REG_INT_STATUS Register\n");
|
|
return;
|
|
}
|
|
|
|
dev_info(pchip->dev, "REG_INT_STATUS Register is 0x%x\n", rval);
|
|
}
|
|
|
|
static irqreturn_t lm3630a_isr_func(int irq, void *chip)
|
|
{
|
|
int rval;
|
|
struct lm3630a_chip *pchip = chip;
|
|
unsigned long delay = msecs_to_jiffies(INT_DEBOUNCE_MSEC);
|
|
|
|
queue_delayed_work(pchip->irqthread, &pchip->work, delay);
|
|
|
|
rval = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00);
|
|
if (rval < 0) {
|
|
dev_err(pchip->dev, "i2c failed to access register\n");
|
|
return IRQ_NONE;
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int lm3630a_intr_config(struct lm3630a_chip *pchip)
|
|
{
|
|
int rval;
|
|
|
|
rval = lm3630a_write(pchip, REG_INT_EN, 0x87);
|
|
if (rval < 0)
|
|
return rval;
|
|
|
|
INIT_DELAYED_WORK(&pchip->work, lm3630a_delayed_func);
|
|
pchip->irqthread = create_singlethread_workqueue("lm3630a-irqthd");
|
|
if (!pchip->irqthread) {
|
|
dev_err(pchip->dev, "create irq thread fail\n");
|
|
return -ENOMEM;
|
|
}
|
|
if (request_threaded_irq
|
|
(pchip->irq, NULL, lm3630a_isr_func,
|
|
IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "lm3630a_irq", pchip)) {
|
|
dev_err(pchip->dev, "request threaded irq fail\n");
|
|
destroy_workqueue(pchip->irqthread);
|
|
return -ENOMEM;
|
|
}
|
|
return rval;
|
|
}
|
|
|
|
static int lm3630a_pwm_ctrl(struct lm3630a_chip *pchip, int br, int br_max)
|
|
{
|
|
int err;
|
|
|
|
pchip->pwmd_state.period = pchip->pdata->pwm_period;
|
|
|
|
err = pwm_set_relative_duty_cycle(&pchip->pwmd_state, br, br_max);
|
|
if (err)
|
|
return err;
|
|
|
|
pchip->pwmd_state.enabled = pchip->pwmd_state.duty_cycle ? true : false;
|
|
|
|
return pwm_apply_state(pchip->pwmd, &pchip->pwmd_state);
|
|
}
|
|
|
|
/* update and get brightness */
|
|
static int lm3630a_bank_a_update_status(struct backlight_device *bl)
|
|
{
|
|
int ret;
|
|
struct lm3630a_chip *pchip = bl_get_data(bl);
|
|
enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
|
|
|
|
/* pwm control */
|
|
if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0)
|
|
return lm3630a_pwm_ctrl(pchip, bl->props.brightness,
|
|
bl->props.max_brightness);
|
|
|
|
/* disable sleep */
|
|
ret = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00);
|
|
if (ret < 0)
|
|
goto out_i2c_err;
|
|
usleep_range(1000, 2000);
|
|
/* minimum brightness is 0x04 */
|
|
ret = lm3630a_write(pchip, REG_BRT_A, bl->props.brightness);
|
|
if (bl->props.brightness < 0x4)
|
|
ret |= lm3630a_update(pchip, REG_CTRL, LM3630A_LEDA_ENABLE, 0);
|
|
else
|
|
ret |= lm3630a_update(pchip, REG_CTRL,
|
|
LM3630A_LEDA_ENABLE, LM3630A_LEDA_ENABLE);
|
|
if (ret < 0)
|
|
goto out_i2c_err;
|
|
return 0;
|
|
|
|
out_i2c_err:
|
|
dev_err(pchip->dev, "i2c failed to access (%pe)\n", ERR_PTR(ret));
|
|
return ret;
|
|
}
|
|
|
|
static int lm3630a_bank_a_get_brightness(struct backlight_device *bl)
|
|
{
|
|
int brightness, rval;
|
|
struct lm3630a_chip *pchip = bl_get_data(bl);
|
|
enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
|
|
|
|
if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) {
|
|
rval = lm3630a_read(pchip, REG_PWM_OUTHIGH);
|
|
if (rval < 0)
|
|
goto out_i2c_err;
|
|
brightness = (rval & 0x01) << 8;
|
|
rval = lm3630a_read(pchip, REG_PWM_OUTLOW);
|
|
if (rval < 0)
|
|
goto out_i2c_err;
|
|
brightness |= rval;
|
|
goto out;
|
|
}
|
|
|
|
/* disable sleep */
|
|
rval = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00);
|
|
if (rval < 0)
|
|
goto out_i2c_err;
|
|
usleep_range(1000, 2000);
|
|
rval = lm3630a_read(pchip, REG_BRT_A);
|
|
if (rval < 0)
|
|
goto out_i2c_err;
|
|
brightness = rval;
|
|
|
|
out:
|
|
bl->props.brightness = brightness;
|
|
return bl->props.brightness;
|
|
out_i2c_err:
|
|
dev_err(pchip->dev, "i2c failed to access register\n");
|
|
return 0;
|
|
}
|
|
|
|
static const struct backlight_ops lm3630a_bank_a_ops = {
|
|
.options = BL_CORE_SUSPENDRESUME,
|
|
.update_status = lm3630a_bank_a_update_status,
|
|
.get_brightness = lm3630a_bank_a_get_brightness,
|
|
};
|
|
|
|
/* update and get brightness */
|
|
static int lm3630a_bank_b_update_status(struct backlight_device *bl)
|
|
{
|
|
int ret;
|
|
struct lm3630a_chip *pchip = bl_get_data(bl);
|
|
enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
|
|
|
|
/* pwm control */
|
|
if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0)
|
|
return lm3630a_pwm_ctrl(pchip, bl->props.brightness,
|
|
bl->props.max_brightness);
|
|
|
|
/* disable sleep */
|
|
ret = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00);
|
|
if (ret < 0)
|
|
goto out_i2c_err;
|
|
usleep_range(1000, 2000);
|
|
/* minimum brightness is 0x04 */
|
|
ret = lm3630a_write(pchip, REG_BRT_B, bl->props.brightness);
|
|
if (bl->props.brightness < 0x4)
|
|
ret |= lm3630a_update(pchip, REG_CTRL, LM3630A_LEDB_ENABLE, 0);
|
|
else
|
|
ret |= lm3630a_update(pchip, REG_CTRL,
|
|
LM3630A_LEDB_ENABLE, LM3630A_LEDB_ENABLE);
|
|
if (ret < 0)
|
|
goto out_i2c_err;
|
|
return 0;
|
|
|
|
out_i2c_err:
|
|
dev_err(pchip->dev, "i2c failed to access (%pe)\n", ERR_PTR(ret));
|
|
return ret;
|
|
}
|
|
|
|
static int lm3630a_bank_b_get_brightness(struct backlight_device *bl)
|
|
{
|
|
int brightness, rval;
|
|
struct lm3630a_chip *pchip = bl_get_data(bl);
|
|
enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
|
|
|
|
if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) {
|
|
rval = lm3630a_read(pchip, REG_PWM_OUTHIGH);
|
|
if (rval < 0)
|
|
goto out_i2c_err;
|
|
brightness = (rval & 0x01) << 8;
|
|
rval = lm3630a_read(pchip, REG_PWM_OUTLOW);
|
|
if (rval < 0)
|
|
goto out_i2c_err;
|
|
brightness |= rval;
|
|
goto out;
|
|
}
|
|
|
|
/* disable sleep */
|
|
rval = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00);
|
|
if (rval < 0)
|
|
goto out_i2c_err;
|
|
usleep_range(1000, 2000);
|
|
rval = lm3630a_read(pchip, REG_BRT_B);
|
|
if (rval < 0)
|
|
goto out_i2c_err;
|
|
brightness = rval;
|
|
|
|
out:
|
|
bl->props.brightness = brightness;
|
|
return bl->props.brightness;
|
|
out_i2c_err:
|
|
dev_err(pchip->dev, "i2c failed to access register\n");
|
|
return 0;
|
|
}
|
|
|
|
static const struct backlight_ops lm3630a_bank_b_ops = {
|
|
.options = BL_CORE_SUSPENDRESUME,
|
|
.update_status = lm3630a_bank_b_update_status,
|
|
.get_brightness = lm3630a_bank_b_get_brightness,
|
|
};
|
|
|
|
static int lm3630a_backlight_register(struct lm3630a_chip *pchip)
|
|
{
|
|
struct lm3630a_platform_data *pdata = pchip->pdata;
|
|
struct backlight_properties props;
|
|
const char *label;
|
|
|
|
props.type = BACKLIGHT_RAW;
|
|
if (pdata->leda_ctrl != LM3630A_LEDA_DISABLE) {
|
|
props.brightness = pdata->leda_init_brt;
|
|
props.max_brightness = pdata->leda_max_brt;
|
|
label = pdata->leda_label ? pdata->leda_label : "lm3630a_leda";
|
|
pchip->bleda =
|
|
devm_backlight_device_register(pchip->dev, label,
|
|
pchip->dev, pchip,
|
|
&lm3630a_bank_a_ops, &props);
|
|
if (IS_ERR(pchip->bleda))
|
|
return PTR_ERR(pchip->bleda);
|
|
}
|
|
|
|
if ((pdata->ledb_ctrl != LM3630A_LEDB_DISABLE) &&
|
|
(pdata->ledb_ctrl != LM3630A_LEDB_ON_A)) {
|
|
props.brightness = pdata->ledb_init_brt;
|
|
props.max_brightness = pdata->ledb_max_brt;
|
|
label = pdata->ledb_label ? pdata->ledb_label : "lm3630a_ledb";
|
|
pchip->bledb =
|
|
devm_backlight_device_register(pchip->dev, label,
|
|
pchip->dev, pchip,
|
|
&lm3630a_bank_b_ops, &props);
|
|
if (IS_ERR(pchip->bledb))
|
|
return PTR_ERR(pchip->bledb);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct regmap_config lm3630a_regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = REG_MAX,
|
|
};
|
|
|
|
static int lm3630a_parse_led_sources(struct fwnode_handle *node,
|
|
int default_led_sources)
|
|
{
|
|
u32 sources[LM3630A_NUM_SINKS];
|
|
int ret, num_sources, i;
|
|
|
|
num_sources = fwnode_property_count_u32(node, "led-sources");
|
|
if (num_sources < 0)
|
|
return default_led_sources;
|
|
else if (num_sources > ARRAY_SIZE(sources))
|
|
return -EINVAL;
|
|
|
|
ret = fwnode_property_read_u32_array(node, "led-sources", sources,
|
|
num_sources);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < num_sources; i++) {
|
|
if (sources[i] != LM3630A_SINK_0 && sources[i] != LM3630A_SINK_1)
|
|
return -EINVAL;
|
|
|
|
ret |= BIT(sources[i]);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int lm3630a_parse_bank(struct lm3630a_platform_data *pdata,
|
|
struct fwnode_handle *node, int *seen_led_sources)
|
|
{
|
|
int led_sources, ret;
|
|
const char *label;
|
|
u32 bank, val;
|
|
bool linear;
|
|
|
|
ret = fwnode_property_read_u32(node, "reg", &bank);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (bank != LM3630A_BANK_0 && bank != LM3630A_BANK_1)
|
|
return -EINVAL;
|
|
|
|
led_sources = lm3630a_parse_led_sources(node, BIT(bank));
|
|
if (led_sources < 0)
|
|
return led_sources;
|
|
|
|
if (*seen_led_sources & led_sources)
|
|
return -EINVAL;
|
|
|
|
*seen_led_sources |= led_sources;
|
|
|
|
linear = fwnode_property_read_bool(node,
|
|
"ti,linear-mapping-mode");
|
|
if (bank) {
|
|
if (led_sources & BIT(LM3630A_SINK_0) ||
|
|
!(led_sources & BIT(LM3630A_SINK_1)))
|
|
return -EINVAL;
|
|
|
|
pdata->ledb_ctrl = linear ?
|
|
LM3630A_LEDB_ENABLE_LINEAR :
|
|
LM3630A_LEDB_ENABLE;
|
|
} else {
|
|
if (!(led_sources & BIT(LM3630A_SINK_0)))
|
|
return -EINVAL;
|
|
|
|
pdata->leda_ctrl = linear ?
|
|
LM3630A_LEDA_ENABLE_LINEAR :
|
|
LM3630A_LEDA_ENABLE;
|
|
|
|
if (led_sources & BIT(LM3630A_SINK_1))
|
|
pdata->ledb_ctrl = LM3630A_LEDB_ON_A;
|
|
}
|
|
|
|
ret = fwnode_property_read_string(node, "label", &label);
|
|
if (!ret) {
|
|
if (bank)
|
|
pdata->ledb_label = label;
|
|
else
|
|
pdata->leda_label = label;
|
|
}
|
|
|
|
ret = fwnode_property_read_u32(node, "default-brightness",
|
|
&val);
|
|
if (!ret) {
|
|
if (bank)
|
|
pdata->ledb_init_brt = val;
|
|
else
|
|
pdata->leda_init_brt = val;
|
|
}
|
|
|
|
ret = fwnode_property_read_u32(node, "max-brightness", &val);
|
|
if (!ret) {
|
|
if (bank)
|
|
pdata->ledb_max_brt = val;
|
|
else
|
|
pdata->leda_max_brt = val;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lm3630a_parse_node(struct lm3630a_chip *pchip,
|
|
struct lm3630a_platform_data *pdata)
|
|
{
|
|
int ret = -ENODEV, seen_led_sources = 0;
|
|
struct fwnode_handle *node;
|
|
|
|
device_for_each_child_node(pchip->dev, node) {
|
|
ret = lm3630a_parse_bank(pdata, node, &seen_led_sources);
|
|
if (ret) {
|
|
fwnode_handle_put(node);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int lm3630a_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct lm3630a_platform_data *pdata = dev_get_platdata(&client->dev);
|
|
struct lm3630a_chip *pchip;
|
|
int rval;
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
|
|
dev_err(&client->dev, "fail : i2c functionality check\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
pchip = devm_kzalloc(&client->dev, sizeof(struct lm3630a_chip),
|
|
GFP_KERNEL);
|
|
if (!pchip)
|
|
return -ENOMEM;
|
|
pchip->dev = &client->dev;
|
|
|
|
pchip->regmap = devm_regmap_init_i2c(client, &lm3630a_regmap);
|
|
if (IS_ERR(pchip->regmap)) {
|
|
rval = PTR_ERR(pchip->regmap);
|
|
dev_err(&client->dev, "fail : allocate reg. map: %d\n", rval);
|
|
return rval;
|
|
}
|
|
|
|
i2c_set_clientdata(client, pchip);
|
|
if (pdata == NULL) {
|
|
pdata = devm_kzalloc(pchip->dev,
|
|
sizeof(struct lm3630a_platform_data),
|
|
GFP_KERNEL);
|
|
if (pdata == NULL)
|
|
return -ENOMEM;
|
|
|
|
/* default values */
|
|
pdata->leda_max_brt = LM3630A_MAX_BRIGHTNESS;
|
|
pdata->ledb_max_brt = LM3630A_MAX_BRIGHTNESS;
|
|
pdata->leda_init_brt = LM3630A_MAX_BRIGHTNESS;
|
|
pdata->ledb_init_brt = LM3630A_MAX_BRIGHTNESS;
|
|
|
|
rval = lm3630a_parse_node(pchip, pdata);
|
|
if (rval) {
|
|
dev_err(&client->dev, "fail : parse node\n");
|
|
return rval;
|
|
}
|
|
}
|
|
pchip->pdata = pdata;
|
|
|
|
pchip->enable_gpio = devm_gpiod_get_optional(&client->dev, "enable",
|
|
GPIOD_OUT_HIGH);
|
|
if (IS_ERR(pchip->enable_gpio)) {
|
|
rval = PTR_ERR(pchip->enable_gpio);
|
|
return rval;
|
|
}
|
|
|
|
/* chip initialize */
|
|
rval = lm3630a_chip_init(pchip);
|
|
if (rval < 0) {
|
|
dev_err(&client->dev, "fail : init chip\n");
|
|
return rval;
|
|
}
|
|
/* backlight register */
|
|
rval = lm3630a_backlight_register(pchip);
|
|
if (rval < 0) {
|
|
dev_err(&client->dev, "fail : backlight register.\n");
|
|
return rval;
|
|
}
|
|
/* pwm */
|
|
if (pdata->pwm_ctrl != LM3630A_PWM_DISABLE) {
|
|
pchip->pwmd = devm_pwm_get(pchip->dev, "lm3630a-pwm");
|
|
if (IS_ERR(pchip->pwmd)) {
|
|
dev_err(&client->dev, "fail : get pwm device\n");
|
|
return PTR_ERR(pchip->pwmd);
|
|
}
|
|
|
|
pwm_init_state(pchip->pwmd, &pchip->pwmd_state);
|
|
}
|
|
|
|
/* interrupt enable : irq 0 is not allowed */
|
|
pchip->irq = client->irq;
|
|
if (pchip->irq) {
|
|
rval = lm3630a_intr_config(pchip);
|
|
if (rval < 0)
|
|
return rval;
|
|
}
|
|
dev_info(&client->dev, "LM3630A backlight register OK.\n");
|
|
return 0;
|
|
}
|
|
|
|
static int lm3630a_remove(struct i2c_client *client)
|
|
{
|
|
int rval;
|
|
struct lm3630a_chip *pchip = i2c_get_clientdata(client);
|
|
|
|
rval = lm3630a_write(pchip, REG_BRT_A, 0);
|
|
if (rval < 0)
|
|
dev_err(pchip->dev, "i2c failed to access register\n");
|
|
|
|
rval = lm3630a_write(pchip, REG_BRT_B, 0);
|
|
if (rval < 0)
|
|
dev_err(pchip->dev, "i2c failed to access register\n");
|
|
|
|
if (pchip->irq) {
|
|
free_irq(pchip->irq, pchip);
|
|
destroy_workqueue(pchip->irqthread);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id lm3630a_id[] = {
|
|
{LM3630A_NAME, 0},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, lm3630a_id);
|
|
|
|
static const struct of_device_id lm3630a_match_table[] = {
|
|
{ .compatible = "ti,lm3630a", },
|
|
{ },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, lm3630a_match_table);
|
|
|
|
static struct i2c_driver lm3630a_i2c_driver = {
|
|
.driver = {
|
|
.name = LM3630A_NAME,
|
|
.of_match_table = lm3630a_match_table,
|
|
},
|
|
.probe = lm3630a_probe,
|
|
.remove = lm3630a_remove,
|
|
.id_table = lm3630a_id,
|
|
};
|
|
|
|
module_i2c_driver(lm3630a_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("Texas Instruments Backlight driver for LM3630A");
|
|
MODULE_AUTHOR("Daniel Jeong <gshark.jeong@gmail.com>");
|
|
MODULE_AUTHOR("LDD MLP <ldd-mlp@list.ti.com>");
|
|
MODULE_LICENSE("GPL v2");
|