229 lines
6.3 KiB
C
229 lines
6.3 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Backlight driver for the Kinetic KTD253
|
|
* Based on code and know-how from the Samsung GT-S7710
|
|
* Gareth Phillips <gareth.phillips@samsung.com>
|
|
*/
|
|
#include <linux/backlight.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/limits.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/property.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* Current ratio is n/32 from 1/32 to 32/32 */
|
|
#define KTD253_MIN_RATIO 1
|
|
#define KTD253_MAX_RATIO 32
|
|
#define KTD253_DEFAULT_RATIO 13
|
|
|
|
#define KTD253_T_LOW_NS (200 + 10) /* Additional 10ns as safety factor */
|
|
#define KTD253_T_HIGH_NS (200 + 10) /* Additional 10ns as safety factor */
|
|
#define KTD253_T_OFF_CRIT_NS 100000 /* 100 us, now it doesn't look good */
|
|
#define KTD253_T_OFF_MS 3
|
|
|
|
struct ktd253_backlight {
|
|
struct device *dev;
|
|
struct backlight_device *bl;
|
|
struct gpio_desc *gpiod;
|
|
u16 ratio;
|
|
};
|
|
|
|
static void ktd253_backlight_set_max_ratio(struct ktd253_backlight *ktd253)
|
|
{
|
|
gpiod_set_value_cansleep(ktd253->gpiod, 1);
|
|
ndelay(KTD253_T_HIGH_NS);
|
|
/* We always fall back to this when we power on */
|
|
}
|
|
|
|
static int ktd253_backlight_stepdown(struct ktd253_backlight *ktd253)
|
|
{
|
|
/*
|
|
* These GPIO operations absolutely can NOT sleep so no _cansleep
|
|
* suffixes, and no using GPIO expanders on slow buses for this!
|
|
*
|
|
* The maximum number of cycles of the loop is 32 so the time taken
|
|
* should nominally be:
|
|
* (T_LOW_NS + T_HIGH_NS + loop_time) * 32
|
|
*
|
|
* Architectures do not always support ndelay() and we will get a few us
|
|
* instead. If we get to a critical time limit an interrupt has likely
|
|
* occured in the low part of the loop and we need to restart from the
|
|
* top so we have the backlight in a known state.
|
|
*/
|
|
u64 ns;
|
|
|
|
ns = ktime_get_ns();
|
|
gpiod_set_value(ktd253->gpiod, 0);
|
|
ndelay(KTD253_T_LOW_NS);
|
|
gpiod_set_value(ktd253->gpiod, 1);
|
|
ns = ktime_get_ns() - ns;
|
|
if (ns >= KTD253_T_OFF_CRIT_NS) {
|
|
dev_err(ktd253->dev, "PCM on backlight took too long (%llu ns)\n", ns);
|
|
return -EAGAIN;
|
|
}
|
|
ndelay(KTD253_T_HIGH_NS);
|
|
return 0;
|
|
}
|
|
|
|
static int ktd253_backlight_update_status(struct backlight_device *bl)
|
|
{
|
|
struct ktd253_backlight *ktd253 = bl_get_data(bl);
|
|
int brightness = backlight_get_brightness(bl);
|
|
u16 target_ratio;
|
|
u16 current_ratio = ktd253->ratio;
|
|
int ret;
|
|
|
|
dev_dbg(ktd253->dev, "new brightness/ratio: %d/32\n", brightness);
|
|
|
|
target_ratio = brightness;
|
|
|
|
if (target_ratio == current_ratio)
|
|
/* This is already right */
|
|
return 0;
|
|
|
|
if (target_ratio == 0) {
|
|
gpiod_set_value_cansleep(ktd253->gpiod, 0);
|
|
/*
|
|
* We need to keep the GPIO low for at least this long
|
|
* to actually switch the KTD253 off.
|
|
*/
|
|
msleep(KTD253_T_OFF_MS);
|
|
ktd253->ratio = 0;
|
|
return 0;
|
|
}
|
|
|
|
if (current_ratio == 0) {
|
|
ktd253_backlight_set_max_ratio(ktd253);
|
|
current_ratio = KTD253_MAX_RATIO;
|
|
}
|
|
|
|
while (current_ratio != target_ratio) {
|
|
/*
|
|
* These GPIO operations absolutely can NOT sleep so no
|
|
* _cansleep suffixes, and no using GPIO expanders on
|
|
* slow buses for this!
|
|
*/
|
|
ret = ktd253_backlight_stepdown(ktd253);
|
|
if (ret == -EAGAIN) {
|
|
/*
|
|
* Something disturbed the backlight setting code when
|
|
* running so we need to bring the PWM back to a known
|
|
* state. This shouldn't happen too much.
|
|
*/
|
|
gpiod_set_value_cansleep(ktd253->gpiod, 0);
|
|
msleep(KTD253_T_OFF_MS);
|
|
ktd253_backlight_set_max_ratio(ktd253);
|
|
current_ratio = KTD253_MAX_RATIO;
|
|
} else if (current_ratio == KTD253_MIN_RATIO) {
|
|
/* After 1/32 we loop back to 32/32 */
|
|
current_ratio = KTD253_MAX_RATIO;
|
|
} else {
|
|
current_ratio--;
|
|
}
|
|
}
|
|
ktd253->ratio = current_ratio;
|
|
|
|
dev_dbg(ktd253->dev, "new ratio set to %d/32\n", target_ratio);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct backlight_ops ktd253_backlight_ops = {
|
|
.options = BL_CORE_SUSPENDRESUME,
|
|
.update_status = ktd253_backlight_update_status,
|
|
};
|
|
|
|
static int ktd253_backlight_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct backlight_device *bl;
|
|
struct ktd253_backlight *ktd253;
|
|
u32 max_brightness;
|
|
u32 brightness;
|
|
int ret;
|
|
|
|
ktd253 = devm_kzalloc(dev, sizeof(*ktd253), GFP_KERNEL);
|
|
if (!ktd253)
|
|
return -ENOMEM;
|
|
ktd253->dev = dev;
|
|
|
|
ret = device_property_read_u32(dev, "max-brightness", &max_brightness);
|
|
if (ret)
|
|
max_brightness = KTD253_MAX_RATIO;
|
|
if (max_brightness > KTD253_MAX_RATIO) {
|
|
/* Clamp brightness to hardware max */
|
|
dev_err(dev, "illegal max brightness specified\n");
|
|
max_brightness = KTD253_MAX_RATIO;
|
|
}
|
|
|
|
ret = device_property_read_u32(dev, "default-brightness", &brightness);
|
|
if (ret)
|
|
brightness = KTD253_DEFAULT_RATIO;
|
|
if (brightness > max_brightness) {
|
|
/* Clamp default brightness to max brightness */
|
|
dev_err(dev, "default brightness exceeds max brightness\n");
|
|
brightness = max_brightness;
|
|
}
|
|
|
|
ktd253->gpiod = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
|
|
if (IS_ERR(ktd253->gpiod)) {
|
|
ret = PTR_ERR(ktd253->gpiod);
|
|
if (ret != -EPROBE_DEFER)
|
|
dev_err(dev, "gpio line missing or invalid.\n");
|
|
return ret;
|
|
}
|
|
gpiod_set_consumer_name(ktd253->gpiod, dev_name(dev));
|
|
/* Bring backlight to a known off state */
|
|
msleep(KTD253_T_OFF_MS);
|
|
|
|
bl = devm_backlight_device_register(dev, dev_name(dev), dev, ktd253,
|
|
&ktd253_backlight_ops, NULL);
|
|
if (IS_ERR(bl)) {
|
|
dev_err(dev, "failed to register backlight\n");
|
|
return PTR_ERR(bl);
|
|
}
|
|
bl->props.max_brightness = max_brightness;
|
|
/* When we just enable the GPIO line we set max brightness */
|
|
if (brightness) {
|
|
bl->props.brightness = brightness;
|
|
bl->props.power = FB_BLANK_UNBLANK;
|
|
} else {
|
|
bl->props.brightness = 0;
|
|
bl->props.power = FB_BLANK_POWERDOWN;
|
|
}
|
|
|
|
ktd253->bl = bl;
|
|
platform_set_drvdata(pdev, bl);
|
|
backlight_update_status(bl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id ktd253_backlight_of_match[] = {
|
|
{ .compatible = "kinetic,ktd253" },
|
|
{ .compatible = "kinetic,ktd259" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ktd253_backlight_of_match);
|
|
|
|
static struct platform_driver ktd253_backlight_driver = {
|
|
.driver = {
|
|
.name = "ktd253-backlight",
|
|
.of_match_table = ktd253_backlight_of_match,
|
|
},
|
|
.probe = ktd253_backlight_probe,
|
|
};
|
|
module_platform_driver(ktd253_backlight_driver);
|
|
|
|
MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
|
|
MODULE_DESCRIPTION("Kinetic KTD253 Backlight Driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:ktd253-backlight");
|