2030 lines
50 KiB
C
2030 lines
50 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* USB4 specific functionality
|
|
*
|
|
* Copyright (C) 2019, Intel Corporation
|
|
* Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
* Rajmohan Mani <rajmohan.mani@intel.com>
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/ktime.h>
|
|
|
|
#include "sb_regs.h"
|
|
#include "tb.h"
|
|
|
|
#define USB4_DATA_RETRIES 3
|
|
|
|
enum usb4_sb_target {
|
|
USB4_SB_TARGET_ROUTER,
|
|
USB4_SB_TARGET_PARTNER,
|
|
USB4_SB_TARGET_RETIMER,
|
|
};
|
|
|
|
#define USB4_NVM_READ_OFFSET_MASK GENMASK(23, 2)
|
|
#define USB4_NVM_READ_OFFSET_SHIFT 2
|
|
#define USB4_NVM_READ_LENGTH_MASK GENMASK(27, 24)
|
|
#define USB4_NVM_READ_LENGTH_SHIFT 24
|
|
|
|
#define USB4_NVM_SET_OFFSET_MASK USB4_NVM_READ_OFFSET_MASK
|
|
#define USB4_NVM_SET_OFFSET_SHIFT USB4_NVM_READ_OFFSET_SHIFT
|
|
|
|
#define USB4_DROM_ADDRESS_MASK GENMASK(14, 2)
|
|
#define USB4_DROM_ADDRESS_SHIFT 2
|
|
#define USB4_DROM_SIZE_MASK GENMASK(19, 15)
|
|
#define USB4_DROM_SIZE_SHIFT 15
|
|
|
|
#define USB4_NVM_SECTOR_SIZE_MASK GENMASK(23, 0)
|
|
|
|
#define USB4_BA_LENGTH_MASK GENMASK(7, 0)
|
|
#define USB4_BA_INDEX_MASK GENMASK(15, 0)
|
|
|
|
enum usb4_ba_index {
|
|
USB4_BA_MAX_USB3 = 0x1,
|
|
USB4_BA_MIN_DP_AUX = 0x2,
|
|
USB4_BA_MIN_DP_MAIN = 0x3,
|
|
USB4_BA_MAX_PCIE = 0x4,
|
|
USB4_BA_MAX_HI = 0x5,
|
|
};
|
|
|
|
#define USB4_BA_VALUE_MASK GENMASK(31, 16)
|
|
#define USB4_BA_VALUE_SHIFT 16
|
|
|
|
static int usb4_native_switch_op(struct tb_switch *sw, u16 opcode,
|
|
u32 *metadata, u8 *status,
|
|
const void *tx_data, size_t tx_dwords,
|
|
void *rx_data, size_t rx_dwords)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
|
|
if (metadata) {
|
|
ret = tb_sw_write(sw, metadata, TB_CFG_SWITCH, ROUTER_CS_25, 1);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
if (tx_dwords) {
|
|
ret = tb_sw_write(sw, tx_data, TB_CFG_SWITCH, ROUTER_CS_9,
|
|
tx_dwords);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
val = opcode | ROUTER_CS_26_OV;
|
|
ret = tb_sw_write(sw, &val, TB_CFG_SWITCH, ROUTER_CS_26, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = tb_switch_wait_for_bit(sw, ROUTER_CS_26, ROUTER_CS_26_OV, 0, 500);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, ROUTER_CS_26, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (val & ROUTER_CS_26_ONS)
|
|
return -EOPNOTSUPP;
|
|
|
|
if (status)
|
|
*status = (val & ROUTER_CS_26_STATUS_MASK) >>
|
|
ROUTER_CS_26_STATUS_SHIFT;
|
|
|
|
if (metadata) {
|
|
ret = tb_sw_read(sw, metadata, TB_CFG_SWITCH, ROUTER_CS_25, 1);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
if (rx_dwords) {
|
|
ret = tb_sw_read(sw, rx_data, TB_CFG_SWITCH, ROUTER_CS_9,
|
|
rx_dwords);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __usb4_switch_op(struct tb_switch *sw, u16 opcode, u32 *metadata,
|
|
u8 *status, const void *tx_data, size_t tx_dwords,
|
|
void *rx_data, size_t rx_dwords)
|
|
{
|
|
const struct tb_cm_ops *cm_ops = sw->tb->cm_ops;
|
|
|
|
if (tx_dwords > NVM_DATA_DWORDS || rx_dwords > NVM_DATA_DWORDS)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* If the connection manager implementation provides USB4 router
|
|
* operation proxy callback, call it here instead of running the
|
|
* operation natively.
|
|
*/
|
|
if (cm_ops->usb4_switch_op) {
|
|
int ret;
|
|
|
|
ret = cm_ops->usb4_switch_op(sw, opcode, metadata, status,
|
|
tx_data, tx_dwords, rx_data,
|
|
rx_dwords);
|
|
if (ret != -EOPNOTSUPP)
|
|
return ret;
|
|
|
|
/*
|
|
* If the proxy was not supported then run the native
|
|
* router operation instead.
|
|
*/
|
|
}
|
|
|
|
return usb4_native_switch_op(sw, opcode, metadata, status, tx_data,
|
|
tx_dwords, rx_data, rx_dwords);
|
|
}
|
|
|
|
static inline int usb4_switch_op(struct tb_switch *sw, u16 opcode,
|
|
u32 *metadata, u8 *status)
|
|
{
|
|
return __usb4_switch_op(sw, opcode, metadata, status, NULL, 0, NULL, 0);
|
|
}
|
|
|
|
static inline int usb4_switch_op_data(struct tb_switch *sw, u16 opcode,
|
|
u32 *metadata, u8 *status,
|
|
const void *tx_data, size_t tx_dwords,
|
|
void *rx_data, size_t rx_dwords)
|
|
{
|
|
return __usb4_switch_op(sw, opcode, metadata, status, tx_data,
|
|
tx_dwords, rx_data, rx_dwords);
|
|
}
|
|
|
|
static void usb4_switch_check_wakes(struct tb_switch *sw)
|
|
{
|
|
struct tb_port *port;
|
|
bool wakeup = false;
|
|
u32 val;
|
|
|
|
if (!device_may_wakeup(&sw->dev))
|
|
return;
|
|
|
|
if (tb_route(sw)) {
|
|
if (tb_sw_read(sw, &val, TB_CFG_SWITCH, ROUTER_CS_6, 1))
|
|
return;
|
|
|
|
tb_sw_dbg(sw, "PCIe wake: %s, USB3 wake: %s\n",
|
|
(val & ROUTER_CS_6_WOPS) ? "yes" : "no",
|
|
(val & ROUTER_CS_6_WOUS) ? "yes" : "no");
|
|
|
|
wakeup = val & (ROUTER_CS_6_WOPS | ROUTER_CS_6_WOUS);
|
|
}
|
|
|
|
/* Check for any connected downstream ports for USB4 wake */
|
|
tb_switch_for_each_port(sw, port) {
|
|
if (!tb_port_has_remote(port))
|
|
continue;
|
|
|
|
if (tb_port_read(port, &val, TB_CFG_PORT,
|
|
port->cap_usb4 + PORT_CS_18, 1))
|
|
break;
|
|
|
|
tb_port_dbg(port, "USB4 wake: %s\n",
|
|
(val & PORT_CS_18_WOU4S) ? "yes" : "no");
|
|
|
|
if (val & PORT_CS_18_WOU4S)
|
|
wakeup = true;
|
|
}
|
|
|
|
if (wakeup)
|
|
pm_wakeup_event(&sw->dev, 0);
|
|
}
|
|
|
|
static bool link_is_usb4(struct tb_port *port)
|
|
{
|
|
u32 val;
|
|
|
|
if (!port->cap_usb4)
|
|
return false;
|
|
|
|
if (tb_port_read(port, &val, TB_CFG_PORT,
|
|
port->cap_usb4 + PORT_CS_18, 1))
|
|
return false;
|
|
|
|
return !(val & PORT_CS_18_TCM);
|
|
}
|
|
|
|
/**
|
|
* usb4_switch_setup() - Additional setup for USB4 device
|
|
* @sw: USB4 router to setup
|
|
*
|
|
* USB4 routers need additional settings in order to enable all the
|
|
* tunneling. This function enables USB and PCIe tunneling if it can be
|
|
* enabled (e.g the parent switch also supports them). If USB tunneling
|
|
* is not available for some reason (like that there is Thunderbolt 3
|
|
* switch upstream) then the internal xHCI controller is enabled
|
|
* instead.
|
|
*/
|
|
int usb4_switch_setup(struct tb_switch *sw)
|
|
{
|
|
struct tb_port *downstream_port;
|
|
struct tb_switch *parent;
|
|
bool tbt3, xhci;
|
|
u32 val = 0;
|
|
int ret;
|
|
|
|
usb4_switch_check_wakes(sw);
|
|
|
|
if (!tb_route(sw))
|
|
return 0;
|
|
|
|
ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, ROUTER_CS_6, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
parent = tb_switch_parent(sw);
|
|
downstream_port = tb_port_at(tb_route(sw), parent);
|
|
sw->link_usb4 = link_is_usb4(downstream_port);
|
|
tb_sw_dbg(sw, "link: %s\n", sw->link_usb4 ? "USB4" : "TBT");
|
|
|
|
xhci = val & ROUTER_CS_6_HCI;
|
|
tbt3 = !(val & ROUTER_CS_6_TNS);
|
|
|
|
tb_sw_dbg(sw, "TBT3 support: %s, xHCI: %s\n",
|
|
tbt3 ? "yes" : "no", xhci ? "yes" : "no");
|
|
|
|
ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, ROUTER_CS_5, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (tb_acpi_may_tunnel_usb3() && sw->link_usb4 &&
|
|
tb_switch_find_port(parent, TB_TYPE_USB3_DOWN)) {
|
|
val |= ROUTER_CS_5_UTO;
|
|
xhci = false;
|
|
}
|
|
|
|
/*
|
|
* Only enable PCIe tunneling if the parent router supports it
|
|
* and it is not disabled.
|
|
*/
|
|
if (tb_acpi_may_tunnel_pcie() &&
|
|
tb_switch_find_port(parent, TB_TYPE_PCIE_DOWN)) {
|
|
val |= ROUTER_CS_5_PTO;
|
|
/*
|
|
* xHCI can be enabled if PCIe tunneling is supported
|
|
* and the parent does not have any USB3 dowstream
|
|
* adapters (so we cannot do USB 3.x tunneling).
|
|
*/
|
|
if (xhci)
|
|
val |= ROUTER_CS_5_HCO;
|
|
}
|
|
|
|
/* TBT3 supported by the CM */
|
|
val |= ROUTER_CS_5_C3S;
|
|
/* Tunneling configuration is ready now */
|
|
val |= ROUTER_CS_5_CV;
|
|
|
|
ret = tb_sw_write(sw, &val, TB_CFG_SWITCH, ROUTER_CS_5, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return tb_switch_wait_for_bit(sw, ROUTER_CS_6, ROUTER_CS_6_CR,
|
|
ROUTER_CS_6_CR, 50);
|
|
}
|
|
|
|
/**
|
|
* usb4_switch_read_uid() - Read UID from USB4 router
|
|
* @sw: USB4 router
|
|
* @uid: UID is stored here
|
|
*
|
|
* Reads 64-bit UID from USB4 router config space.
|
|
*/
|
|
int usb4_switch_read_uid(struct tb_switch *sw, u64 *uid)
|
|
{
|
|
return tb_sw_read(sw, uid, TB_CFG_SWITCH, ROUTER_CS_7, 2);
|
|
}
|
|
|
|
static int usb4_switch_drom_read_block(void *data,
|
|
unsigned int dwaddress, void *buf,
|
|
size_t dwords)
|
|
{
|
|
struct tb_switch *sw = data;
|
|
u8 status = 0;
|
|
u32 metadata;
|
|
int ret;
|
|
|
|
metadata = (dwords << USB4_DROM_SIZE_SHIFT) & USB4_DROM_SIZE_MASK;
|
|
metadata |= (dwaddress << USB4_DROM_ADDRESS_SHIFT) &
|
|
USB4_DROM_ADDRESS_MASK;
|
|
|
|
ret = usb4_switch_op_data(sw, USB4_SWITCH_OP_DROM_READ, &metadata,
|
|
&status, NULL, 0, buf, dwords);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return status ? -EIO : 0;
|
|
}
|
|
|
|
/**
|
|
* usb4_switch_drom_read() - Read arbitrary bytes from USB4 router DROM
|
|
* @sw: USB4 router
|
|
* @address: Byte address inside DROM to start reading
|
|
* @buf: Buffer where the DROM content is stored
|
|
* @size: Number of bytes to read from DROM
|
|
*
|
|
* Uses USB4 router operations to read router DROM. For devices this
|
|
* should always work but for hosts it may return %-EOPNOTSUPP in which
|
|
* case the host router does not have DROM.
|
|
*/
|
|
int usb4_switch_drom_read(struct tb_switch *sw, unsigned int address, void *buf,
|
|
size_t size)
|
|
{
|
|
return tb_nvm_read_data(address, buf, size, USB4_DATA_RETRIES,
|
|
usb4_switch_drom_read_block, sw);
|
|
}
|
|
|
|
/**
|
|
* usb4_switch_lane_bonding_possible() - Are conditions met for lane bonding
|
|
* @sw: USB4 router
|
|
*
|
|
* Checks whether conditions are met so that lane bonding can be
|
|
* established with the upstream router. Call only for device routers.
|
|
*/
|
|
bool usb4_switch_lane_bonding_possible(struct tb_switch *sw)
|
|
{
|
|
struct tb_port *up;
|
|
int ret;
|
|
u32 val;
|
|
|
|
up = tb_upstream_port(sw);
|
|
ret = tb_port_read(up, &val, TB_CFG_PORT, up->cap_usb4 + PORT_CS_18, 1);
|
|
if (ret)
|
|
return false;
|
|
|
|
return !!(val & PORT_CS_18_BE);
|
|
}
|
|
|
|
/**
|
|
* usb4_switch_set_wake() - Enabled/disable wake
|
|
* @sw: USB4 router
|
|
* @flags: Wakeup flags (%0 to disable)
|
|
*
|
|
* Enables/disables router to wake up from sleep.
|
|
*/
|
|
int usb4_switch_set_wake(struct tb_switch *sw, unsigned int flags)
|
|
{
|
|
struct tb_port *port;
|
|
u64 route = tb_route(sw);
|
|
u32 val;
|
|
int ret;
|
|
|
|
/*
|
|
* Enable wakes coming from all USB4 downstream ports (from
|
|
* child routers). For device routers do this also for the
|
|
* upstream USB4 port.
|
|
*/
|
|
tb_switch_for_each_port(sw, port) {
|
|
if (!tb_port_is_null(port))
|
|
continue;
|
|
if (!route && tb_is_upstream_port(port))
|
|
continue;
|
|
if (!port->cap_usb4)
|
|
continue;
|
|
|
|
ret = tb_port_read(port, &val, TB_CFG_PORT,
|
|
port->cap_usb4 + PORT_CS_19, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val &= ~(PORT_CS_19_WOC | PORT_CS_19_WOD | PORT_CS_19_WOU4);
|
|
|
|
if (tb_is_upstream_port(port)) {
|
|
val |= PORT_CS_19_WOU4;
|
|
} else {
|
|
bool configured = val & PORT_CS_19_PC;
|
|
|
|
if ((flags & TB_WAKE_ON_CONNECT) && !configured)
|
|
val |= PORT_CS_19_WOC;
|
|
if ((flags & TB_WAKE_ON_DISCONNECT) && configured)
|
|
val |= PORT_CS_19_WOD;
|
|
if ((flags & TB_WAKE_ON_USB4) && configured)
|
|
val |= PORT_CS_19_WOU4;
|
|
}
|
|
|
|
ret = tb_port_write(port, &val, TB_CFG_PORT,
|
|
port->cap_usb4 + PORT_CS_19, 1);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Enable wakes from PCIe, USB 3.x and DP on this router. Only
|
|
* needed for device routers.
|
|
*/
|
|
if (route) {
|
|
ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, ROUTER_CS_5, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val &= ~(ROUTER_CS_5_WOP | ROUTER_CS_5_WOU | ROUTER_CS_5_WOD);
|
|
if (flags & TB_WAKE_ON_USB3)
|
|
val |= ROUTER_CS_5_WOU;
|
|
if (flags & TB_WAKE_ON_PCIE)
|
|
val |= ROUTER_CS_5_WOP;
|
|
if (flags & TB_WAKE_ON_DP)
|
|
val |= ROUTER_CS_5_WOD;
|
|
|
|
ret = tb_sw_write(sw, &val, TB_CFG_SWITCH, ROUTER_CS_5, 1);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* usb4_switch_set_sleep() - Prepare the router to enter sleep
|
|
* @sw: USB4 router
|
|
*
|
|
* Sets sleep bit for the router. Returns when the router sleep ready
|
|
* bit has been asserted.
|
|
*/
|
|
int usb4_switch_set_sleep(struct tb_switch *sw)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
/* Set sleep bit and wait for sleep ready to be asserted */
|
|
ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, ROUTER_CS_5, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val |= ROUTER_CS_5_SLP;
|
|
|
|
ret = tb_sw_write(sw, &val, TB_CFG_SWITCH, ROUTER_CS_5, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return tb_switch_wait_for_bit(sw, ROUTER_CS_6, ROUTER_CS_6_SLPR,
|
|
ROUTER_CS_6_SLPR, 500);
|
|
}
|
|
|
|
/**
|
|
* usb4_switch_nvm_sector_size() - Return router NVM sector size
|
|
* @sw: USB4 router
|
|
*
|
|
* If the router supports NVM operations this function returns the NVM
|
|
* sector size in bytes. If NVM operations are not supported returns
|
|
* %-EOPNOTSUPP.
|
|
*/
|
|
int usb4_switch_nvm_sector_size(struct tb_switch *sw)
|
|
{
|
|
u32 metadata;
|
|
u8 status;
|
|
int ret;
|
|
|
|
ret = usb4_switch_op(sw, USB4_SWITCH_OP_NVM_SECTOR_SIZE, &metadata,
|
|
&status);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (status)
|
|
return status == 0x2 ? -EOPNOTSUPP : -EIO;
|
|
|
|
return metadata & USB4_NVM_SECTOR_SIZE_MASK;
|
|
}
|
|
|
|
static int usb4_switch_nvm_read_block(void *data,
|
|
unsigned int dwaddress, void *buf, size_t dwords)
|
|
{
|
|
struct tb_switch *sw = data;
|
|
u8 status = 0;
|
|
u32 metadata;
|
|
int ret;
|
|
|
|
metadata = (dwords << USB4_NVM_READ_LENGTH_SHIFT) &
|
|
USB4_NVM_READ_LENGTH_MASK;
|
|
metadata |= (dwaddress << USB4_NVM_READ_OFFSET_SHIFT) &
|
|
USB4_NVM_READ_OFFSET_MASK;
|
|
|
|
ret = usb4_switch_op_data(sw, USB4_SWITCH_OP_NVM_READ, &metadata,
|
|
&status, NULL, 0, buf, dwords);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return status ? -EIO : 0;
|
|
}
|
|
|
|
/**
|
|
* usb4_switch_nvm_read() - Read arbitrary bytes from router NVM
|
|
* @sw: USB4 router
|
|
* @address: Starting address in bytes
|
|
* @buf: Read data is placed here
|
|
* @size: How many bytes to read
|
|
*
|
|
* Reads NVM contents of the router. If NVM is not supported returns
|
|
* %-EOPNOTSUPP.
|
|
*/
|
|
int usb4_switch_nvm_read(struct tb_switch *sw, unsigned int address, void *buf,
|
|
size_t size)
|
|
{
|
|
return tb_nvm_read_data(address, buf, size, USB4_DATA_RETRIES,
|
|
usb4_switch_nvm_read_block, sw);
|
|
}
|
|
|
|
/**
|
|
* usb4_switch_nvm_set_offset() - Set NVM write offset
|
|
* @sw: USB4 router
|
|
* @address: Start offset
|
|
*
|
|
* Explicitly sets NVM write offset. Normally when writing to NVM this
|
|
* is done automatically by usb4_switch_nvm_write().
|
|
*
|
|
* Returns %0 in success and negative errno if there was a failure.
|
|
*/
|
|
int usb4_switch_nvm_set_offset(struct tb_switch *sw, unsigned int address)
|
|
{
|
|
u32 metadata, dwaddress;
|
|
u8 status = 0;
|
|
int ret;
|
|
|
|
dwaddress = address / 4;
|
|
metadata = (dwaddress << USB4_NVM_SET_OFFSET_SHIFT) &
|
|
USB4_NVM_SET_OFFSET_MASK;
|
|
|
|
ret = usb4_switch_op(sw, USB4_SWITCH_OP_NVM_SET_OFFSET, &metadata,
|
|
&status);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return status ? -EIO : 0;
|
|
}
|
|
|
|
static int usb4_switch_nvm_write_next_block(void *data, unsigned int dwaddress,
|
|
const void *buf, size_t dwords)
|
|
{
|
|
struct tb_switch *sw = data;
|
|
u8 status;
|
|
int ret;
|
|
|
|
ret = usb4_switch_op_data(sw, USB4_SWITCH_OP_NVM_WRITE, NULL, &status,
|
|
buf, dwords, NULL, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return status ? -EIO : 0;
|
|
}
|
|
|
|
/**
|
|
* usb4_switch_nvm_write() - Write to the router NVM
|
|
* @sw: USB4 router
|
|
* @address: Start address where to write in bytes
|
|
* @buf: Pointer to the data to write
|
|
* @size: Size of @buf in bytes
|
|
*
|
|
* Writes @buf to the router NVM using USB4 router operations. If NVM
|
|
* write is not supported returns %-EOPNOTSUPP.
|
|
*/
|
|
int usb4_switch_nvm_write(struct tb_switch *sw, unsigned int address,
|
|
const void *buf, size_t size)
|
|
{
|
|
int ret;
|
|
|
|
ret = usb4_switch_nvm_set_offset(sw, address);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return tb_nvm_write_data(address, buf, size, USB4_DATA_RETRIES,
|
|
usb4_switch_nvm_write_next_block, sw);
|
|
}
|
|
|
|
/**
|
|
* usb4_switch_nvm_authenticate() - Authenticate new NVM
|
|
* @sw: USB4 router
|
|
*
|
|
* After the new NVM has been written via usb4_switch_nvm_write(), this
|
|
* function triggers NVM authentication process. The router gets power
|
|
* cycled and if the authentication is successful the new NVM starts
|
|
* running. In case of failure returns negative errno.
|
|
*
|
|
* The caller should call usb4_switch_nvm_authenticate_status() to read
|
|
* the status of the authentication after power cycle. It should be the
|
|
* first router operation to avoid the status being lost.
|
|
*/
|
|
int usb4_switch_nvm_authenticate(struct tb_switch *sw)
|
|
{
|
|
int ret;
|
|
|
|
ret = usb4_switch_op(sw, USB4_SWITCH_OP_NVM_AUTH, NULL, NULL);
|
|
switch (ret) {
|
|
/*
|
|
* The router is power cycled once NVM_AUTH is started so it is
|
|
* expected to get any of the following errors back.
|
|
*/
|
|
case -EACCES:
|
|
case -ENOTCONN:
|
|
case -ETIMEDOUT:
|
|
return 0;
|
|
|
|
default:
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* usb4_switch_nvm_authenticate_status() - Read status of last NVM authenticate
|
|
* @sw: USB4 router
|
|
* @status: Status code of the operation
|
|
*
|
|
* The function checks if there is status available from the last NVM
|
|
* authenticate router operation. If there is status then %0 is returned
|
|
* and the status code is placed in @status. Returns negative errno in case
|
|
* of failure.
|
|
*
|
|
* Must be called before any other router operation.
|
|
*/
|
|
int usb4_switch_nvm_authenticate_status(struct tb_switch *sw, u32 *status)
|
|
{
|
|
const struct tb_cm_ops *cm_ops = sw->tb->cm_ops;
|
|
u16 opcode;
|
|
u32 val;
|
|
int ret;
|
|
|
|
if (cm_ops->usb4_switch_nvm_authenticate_status) {
|
|
ret = cm_ops->usb4_switch_nvm_authenticate_status(sw, status);
|
|
if (ret != -EOPNOTSUPP)
|
|
return ret;
|
|
}
|
|
|
|
ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, ROUTER_CS_26, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Check that the opcode is correct */
|
|
opcode = val & ROUTER_CS_26_OPCODE_MASK;
|
|
if (opcode == USB4_SWITCH_OP_NVM_AUTH) {
|
|
if (val & ROUTER_CS_26_OV)
|
|
return -EBUSY;
|
|
if (val & ROUTER_CS_26_ONS)
|
|
return -EOPNOTSUPP;
|
|
|
|
*status = (val & ROUTER_CS_26_STATUS_MASK) >>
|
|
ROUTER_CS_26_STATUS_SHIFT;
|
|
} else {
|
|
*status = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* usb4_switch_credits_init() - Read buffer allocation parameters
|
|
* @sw: USB4 router
|
|
*
|
|
* Reads @sw buffer allocation parameters and initializes @sw buffer
|
|
* allocation fields accordingly. Specifically @sw->credits_allocation
|
|
* is set to %true if these parameters can be used in tunneling.
|
|
*
|
|
* Returns %0 on success and negative errno otherwise.
|
|
*/
|
|
int usb4_switch_credits_init(struct tb_switch *sw)
|
|
{
|
|
int max_usb3, min_dp_aux, min_dp_main, max_pcie, max_dma;
|
|
int ret, length, i, nports;
|
|
const struct tb_port *port;
|
|
u32 data[NVM_DATA_DWORDS];
|
|
u32 metadata = 0;
|
|
u8 status = 0;
|
|
|
|
memset(data, 0, sizeof(data));
|
|
ret = usb4_switch_op_data(sw, USB4_SWITCH_OP_BUFFER_ALLOC, &metadata,
|
|
&status, NULL, 0, data, ARRAY_SIZE(data));
|
|
if (ret)
|
|
return ret;
|
|
if (status)
|
|
return -EIO;
|
|
|
|
length = metadata & USB4_BA_LENGTH_MASK;
|
|
if (WARN_ON(length > ARRAY_SIZE(data)))
|
|
return -EMSGSIZE;
|
|
|
|
max_usb3 = -1;
|
|
min_dp_aux = -1;
|
|
min_dp_main = -1;
|
|
max_pcie = -1;
|
|
max_dma = -1;
|
|
|
|
tb_sw_dbg(sw, "credit allocation parameters:\n");
|
|
|
|
for (i = 0; i < length; i++) {
|
|
u16 index, value;
|
|
|
|
index = data[i] & USB4_BA_INDEX_MASK;
|
|
value = (data[i] & USB4_BA_VALUE_MASK) >> USB4_BA_VALUE_SHIFT;
|
|
|
|
switch (index) {
|
|
case USB4_BA_MAX_USB3:
|
|
tb_sw_dbg(sw, " USB3: %u\n", value);
|
|
max_usb3 = value;
|
|
break;
|
|
case USB4_BA_MIN_DP_AUX:
|
|
tb_sw_dbg(sw, " DP AUX: %u\n", value);
|
|
min_dp_aux = value;
|
|
break;
|
|
case USB4_BA_MIN_DP_MAIN:
|
|
tb_sw_dbg(sw, " DP main: %u\n", value);
|
|
min_dp_main = value;
|
|
break;
|
|
case USB4_BA_MAX_PCIE:
|
|
tb_sw_dbg(sw, " PCIe: %u\n", value);
|
|
max_pcie = value;
|
|
break;
|
|
case USB4_BA_MAX_HI:
|
|
tb_sw_dbg(sw, " DMA: %u\n", value);
|
|
max_dma = value;
|
|
break;
|
|
default:
|
|
tb_sw_dbg(sw, " unknown credit allocation index %#x, skipping\n",
|
|
index);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Validate the buffer allocation preferences. If we find
|
|
* issues, log a warning and fall back using the hard-coded
|
|
* values.
|
|
*/
|
|
|
|
/* Host router must report baMaxHI */
|
|
if (!tb_route(sw) && max_dma < 0) {
|
|
tb_sw_warn(sw, "host router is missing baMaxHI\n");
|
|
goto err_invalid;
|
|
}
|
|
|
|
nports = 0;
|
|
tb_switch_for_each_port(sw, port) {
|
|
if (tb_port_is_null(port))
|
|
nports++;
|
|
}
|
|
|
|
/* Must have DP buffer allocation (multiple USB4 ports) */
|
|
if (nports > 2 && (min_dp_aux < 0 || min_dp_main < 0)) {
|
|
tb_sw_warn(sw, "multiple USB4 ports require baMinDPaux/baMinDPmain\n");
|
|
goto err_invalid;
|
|
}
|
|
|
|
tb_switch_for_each_port(sw, port) {
|
|
if (tb_port_is_dpout(port) && min_dp_main < 0) {
|
|
tb_sw_warn(sw, "missing baMinDPmain");
|
|
goto err_invalid;
|
|
}
|
|
if ((tb_port_is_dpin(port) || tb_port_is_dpout(port)) &&
|
|
min_dp_aux < 0) {
|
|
tb_sw_warn(sw, "missing baMinDPaux");
|
|
goto err_invalid;
|
|
}
|
|
if ((tb_port_is_usb3_down(port) || tb_port_is_usb3_up(port)) &&
|
|
max_usb3 < 0) {
|
|
tb_sw_warn(sw, "missing baMaxUSB3");
|
|
goto err_invalid;
|
|
}
|
|
if ((tb_port_is_pcie_down(port) || tb_port_is_pcie_up(port)) &&
|
|
max_pcie < 0) {
|
|
tb_sw_warn(sw, "missing baMaxPCIe");
|
|
goto err_invalid;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Buffer allocation passed the validation so we can use it in
|
|
* path creation.
|
|
*/
|
|
sw->credit_allocation = true;
|
|
if (max_usb3 > 0)
|
|
sw->max_usb3_credits = max_usb3;
|
|
if (min_dp_aux > 0)
|
|
sw->min_dp_aux_credits = min_dp_aux;
|
|
if (min_dp_main > 0)
|
|
sw->min_dp_main_credits = min_dp_main;
|
|
if (max_pcie > 0)
|
|
sw->max_pcie_credits = max_pcie;
|
|
if (max_dma > 0)
|
|
sw->max_dma_credits = max_dma;
|
|
|
|
return 0;
|
|
|
|
err_invalid:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* usb4_switch_query_dp_resource() - Query availability of DP IN resource
|
|
* @sw: USB4 router
|
|
* @in: DP IN adapter
|
|
*
|
|
* For DP tunneling this function can be used to query availability of
|
|
* DP IN resource. Returns true if the resource is available for DP
|
|
* tunneling, false otherwise.
|
|
*/
|
|
bool usb4_switch_query_dp_resource(struct tb_switch *sw, struct tb_port *in)
|
|
{
|
|
u32 metadata = in->port;
|
|
u8 status;
|
|
int ret;
|
|
|
|
ret = usb4_switch_op(sw, USB4_SWITCH_OP_QUERY_DP_RESOURCE, &metadata,
|
|
&status);
|
|
/*
|
|
* If DP resource allocation is not supported assume it is
|
|
* always available.
|
|
*/
|
|
if (ret == -EOPNOTSUPP)
|
|
return true;
|
|
else if (ret)
|
|
return false;
|
|
|
|
return !status;
|
|
}
|
|
|
|
/**
|
|
* usb4_switch_alloc_dp_resource() - Allocate DP IN resource
|
|
* @sw: USB4 router
|
|
* @in: DP IN adapter
|
|
*
|
|
* Allocates DP IN resource for DP tunneling using USB4 router
|
|
* operations. If the resource was allocated returns %0. Otherwise
|
|
* returns negative errno, in particular %-EBUSY if the resource is
|
|
* already allocated.
|
|
*/
|
|
int usb4_switch_alloc_dp_resource(struct tb_switch *sw, struct tb_port *in)
|
|
{
|
|
u32 metadata = in->port;
|
|
u8 status;
|
|
int ret;
|
|
|
|
ret = usb4_switch_op(sw, USB4_SWITCH_OP_ALLOC_DP_RESOURCE, &metadata,
|
|
&status);
|
|
if (ret == -EOPNOTSUPP)
|
|
return 0;
|
|
else if (ret)
|
|
return ret;
|
|
|
|
return status ? -EBUSY : 0;
|
|
}
|
|
|
|
/**
|
|
* usb4_switch_dealloc_dp_resource() - Releases allocated DP IN resource
|
|
* @sw: USB4 router
|
|
* @in: DP IN adapter
|
|
*
|
|
* Releases the previously allocated DP IN resource.
|
|
*/
|
|
int usb4_switch_dealloc_dp_resource(struct tb_switch *sw, struct tb_port *in)
|
|
{
|
|
u32 metadata = in->port;
|
|
u8 status;
|
|
int ret;
|
|
|
|
ret = usb4_switch_op(sw, USB4_SWITCH_OP_DEALLOC_DP_RESOURCE, &metadata,
|
|
&status);
|
|
if (ret == -EOPNOTSUPP)
|
|
return 0;
|
|
else if (ret)
|
|
return ret;
|
|
|
|
return status ? -EIO : 0;
|
|
}
|
|
|
|
static int usb4_port_idx(const struct tb_switch *sw, const struct tb_port *port)
|
|
{
|
|
struct tb_port *p;
|
|
int usb4_idx = 0;
|
|
|
|
/* Assume port is primary */
|
|
tb_switch_for_each_port(sw, p) {
|
|
if (!tb_port_is_null(p))
|
|
continue;
|
|
if (tb_is_upstream_port(p))
|
|
continue;
|
|
if (!p->link_nr) {
|
|
if (p == port)
|
|
break;
|
|
usb4_idx++;
|
|
}
|
|
}
|
|
|
|
return usb4_idx;
|
|
}
|
|
|
|
/**
|
|
* usb4_switch_map_pcie_down() - Map USB4 port to a PCIe downstream adapter
|
|
* @sw: USB4 router
|
|
* @port: USB4 port
|
|
*
|
|
* USB4 routers have direct mapping between USB4 ports and PCIe
|
|
* downstream adapters where the PCIe topology is extended. This
|
|
* function returns the corresponding downstream PCIe adapter or %NULL
|
|
* if no such mapping was possible.
|
|
*/
|
|
struct tb_port *usb4_switch_map_pcie_down(struct tb_switch *sw,
|
|
const struct tb_port *port)
|
|
{
|
|
int usb4_idx = usb4_port_idx(sw, port);
|
|
struct tb_port *p;
|
|
int pcie_idx = 0;
|
|
|
|
/* Find PCIe down port matching usb4_port */
|
|
tb_switch_for_each_port(sw, p) {
|
|
if (!tb_port_is_pcie_down(p))
|
|
continue;
|
|
|
|
if (pcie_idx == usb4_idx)
|
|
return p;
|
|
|
|
pcie_idx++;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* usb4_switch_map_usb3_down() - Map USB4 port to a USB3 downstream adapter
|
|
* @sw: USB4 router
|
|
* @port: USB4 port
|
|
*
|
|
* USB4 routers have direct mapping between USB4 ports and USB 3.x
|
|
* downstream adapters where the USB 3.x topology is extended. This
|
|
* function returns the corresponding downstream USB 3.x adapter or
|
|
* %NULL if no such mapping was possible.
|
|
*/
|
|
struct tb_port *usb4_switch_map_usb3_down(struct tb_switch *sw,
|
|
const struct tb_port *port)
|
|
{
|
|
int usb4_idx = usb4_port_idx(sw, port);
|
|
struct tb_port *p;
|
|
int usb_idx = 0;
|
|
|
|
/* Find USB3 down port matching usb4_port */
|
|
tb_switch_for_each_port(sw, p) {
|
|
if (!tb_port_is_usb3_down(p))
|
|
continue;
|
|
|
|
if (usb_idx == usb4_idx)
|
|
return p;
|
|
|
|
usb_idx++;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* usb4_switch_add_ports() - Add USB4 ports for this router
|
|
* @sw: USB4 router
|
|
*
|
|
* For USB4 router finds all USB4 ports and registers devices for each.
|
|
* Can be called to any router.
|
|
*
|
|
* Return %0 in case of success and negative errno in case of failure.
|
|
*/
|
|
int usb4_switch_add_ports(struct tb_switch *sw)
|
|
{
|
|
struct tb_port *port;
|
|
|
|
if (tb_switch_is_icm(sw) || !tb_switch_is_usb4(sw))
|
|
return 0;
|
|
|
|
tb_switch_for_each_port(sw, port) {
|
|
struct usb4_port *usb4;
|
|
|
|
if (!tb_port_is_null(port))
|
|
continue;
|
|
if (!port->cap_usb4)
|
|
continue;
|
|
|
|
usb4 = usb4_port_device_add(port);
|
|
if (IS_ERR(usb4)) {
|
|
usb4_switch_remove_ports(sw);
|
|
return PTR_ERR(usb4);
|
|
}
|
|
|
|
port->usb4 = usb4;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* usb4_switch_remove_ports() - Removes USB4 ports from this router
|
|
* @sw: USB4 router
|
|
*
|
|
* Unregisters previously registered USB4 ports.
|
|
*/
|
|
void usb4_switch_remove_ports(struct tb_switch *sw)
|
|
{
|
|
struct tb_port *port;
|
|
|
|
tb_switch_for_each_port(sw, port) {
|
|
if (port->usb4) {
|
|
usb4_port_device_remove(port->usb4);
|
|
port->usb4 = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* usb4_port_unlock() - Unlock USB4 downstream port
|
|
* @port: USB4 port to unlock
|
|
*
|
|
* Unlocks USB4 downstream port so that the connection manager can
|
|
* access the router below this port.
|
|
*/
|
|
int usb4_port_unlock(struct tb_port *port)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
ret = tb_port_read(port, &val, TB_CFG_PORT, ADP_CS_4, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val &= ~ADP_CS_4_LCK;
|
|
return tb_port_write(port, &val, TB_CFG_PORT, ADP_CS_4, 1);
|
|
}
|
|
|
|
static int usb4_port_set_configured(struct tb_port *port, bool configured)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
if (!port->cap_usb4)
|
|
return -EINVAL;
|
|
|
|
ret = tb_port_read(port, &val, TB_CFG_PORT,
|
|
port->cap_usb4 + PORT_CS_19, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (configured)
|
|
val |= PORT_CS_19_PC;
|
|
else
|
|
val &= ~PORT_CS_19_PC;
|
|
|
|
return tb_port_write(port, &val, TB_CFG_PORT,
|
|
port->cap_usb4 + PORT_CS_19, 1);
|
|
}
|
|
|
|
/**
|
|
* usb4_port_configure() - Set USB4 port configured
|
|
* @port: USB4 router
|
|
*
|
|
* Sets the USB4 link to be configured for power management purposes.
|
|
*/
|
|
int usb4_port_configure(struct tb_port *port)
|
|
{
|
|
return usb4_port_set_configured(port, true);
|
|
}
|
|
|
|
/**
|
|
* usb4_port_unconfigure() - Set USB4 port unconfigured
|
|
* @port: USB4 router
|
|
*
|
|
* Sets the USB4 link to be unconfigured for power management purposes.
|
|
*/
|
|
void usb4_port_unconfigure(struct tb_port *port)
|
|
{
|
|
usb4_port_set_configured(port, false);
|
|
}
|
|
|
|
static int usb4_set_xdomain_configured(struct tb_port *port, bool configured)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
if (!port->cap_usb4)
|
|
return -EINVAL;
|
|
|
|
ret = tb_port_read(port, &val, TB_CFG_PORT,
|
|
port->cap_usb4 + PORT_CS_19, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (configured)
|
|
val |= PORT_CS_19_PID;
|
|
else
|
|
val &= ~PORT_CS_19_PID;
|
|
|
|
return tb_port_write(port, &val, TB_CFG_PORT,
|
|
port->cap_usb4 + PORT_CS_19, 1);
|
|
}
|
|
|
|
/**
|
|
* usb4_port_configure_xdomain() - Configure port for XDomain
|
|
* @port: USB4 port connected to another host
|
|
*
|
|
* Marks the USB4 port as being connected to another host. Returns %0 in
|
|
* success and negative errno in failure.
|
|
*/
|
|
int usb4_port_configure_xdomain(struct tb_port *port)
|
|
{
|
|
return usb4_set_xdomain_configured(port, true);
|
|
}
|
|
|
|
/**
|
|
* usb4_port_unconfigure_xdomain() - Unconfigure port for XDomain
|
|
* @port: USB4 port that was connected to another host
|
|
*
|
|
* Clears USB4 port from being marked as XDomain.
|
|
*/
|
|
void usb4_port_unconfigure_xdomain(struct tb_port *port)
|
|
{
|
|
usb4_set_xdomain_configured(port, false);
|
|
}
|
|
|
|
static int usb4_port_wait_for_bit(struct tb_port *port, u32 offset, u32 bit,
|
|
u32 value, int timeout_msec)
|
|
{
|
|
ktime_t timeout = ktime_add_ms(ktime_get(), timeout_msec);
|
|
|
|
do {
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = tb_port_read(port, &val, TB_CFG_PORT, offset, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if ((val & bit) == value)
|
|
return 0;
|
|
|
|
usleep_range(50, 100);
|
|
} while (ktime_before(ktime_get(), timeout));
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int usb4_port_read_data(struct tb_port *port, void *data, size_t dwords)
|
|
{
|
|
if (dwords > NVM_DATA_DWORDS)
|
|
return -EINVAL;
|
|
|
|
return tb_port_read(port, data, TB_CFG_PORT, port->cap_usb4 + PORT_CS_2,
|
|
dwords);
|
|
}
|
|
|
|
static int usb4_port_write_data(struct tb_port *port, const void *data,
|
|
size_t dwords)
|
|
{
|
|
if (dwords > NVM_DATA_DWORDS)
|
|
return -EINVAL;
|
|
|
|
return tb_port_write(port, data, TB_CFG_PORT, port->cap_usb4 + PORT_CS_2,
|
|
dwords);
|
|
}
|
|
|
|
static int usb4_port_sb_read(struct tb_port *port, enum usb4_sb_target target,
|
|
u8 index, u8 reg, void *buf, u8 size)
|
|
{
|
|
size_t dwords = DIV_ROUND_UP(size, 4);
|
|
int ret;
|
|
u32 val;
|
|
|
|
if (!port->cap_usb4)
|
|
return -EINVAL;
|
|
|
|
val = reg;
|
|
val |= size << PORT_CS_1_LENGTH_SHIFT;
|
|
val |= (target << PORT_CS_1_TARGET_SHIFT) & PORT_CS_1_TARGET_MASK;
|
|
if (target == USB4_SB_TARGET_RETIMER)
|
|
val |= (index << PORT_CS_1_RETIMER_INDEX_SHIFT);
|
|
val |= PORT_CS_1_PND;
|
|
|
|
ret = tb_port_write(port, &val, TB_CFG_PORT,
|
|
port->cap_usb4 + PORT_CS_1, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = usb4_port_wait_for_bit(port, port->cap_usb4 + PORT_CS_1,
|
|
PORT_CS_1_PND, 0, 500);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = tb_port_read(port, &val, TB_CFG_PORT,
|
|
port->cap_usb4 + PORT_CS_1, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (val & PORT_CS_1_NR)
|
|
return -ENODEV;
|
|
if (val & PORT_CS_1_RC)
|
|
return -EIO;
|
|
|
|
return buf ? usb4_port_read_data(port, buf, dwords) : 0;
|
|
}
|
|
|
|
static int usb4_port_sb_write(struct tb_port *port, enum usb4_sb_target target,
|
|
u8 index, u8 reg, const void *buf, u8 size)
|
|
{
|
|
size_t dwords = DIV_ROUND_UP(size, 4);
|
|
int ret;
|
|
u32 val;
|
|
|
|
if (!port->cap_usb4)
|
|
return -EINVAL;
|
|
|
|
if (buf) {
|
|
ret = usb4_port_write_data(port, buf, dwords);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
val = reg;
|
|
val |= size << PORT_CS_1_LENGTH_SHIFT;
|
|
val |= PORT_CS_1_WNR_WRITE;
|
|
val |= (target << PORT_CS_1_TARGET_SHIFT) & PORT_CS_1_TARGET_MASK;
|
|
if (target == USB4_SB_TARGET_RETIMER)
|
|
val |= (index << PORT_CS_1_RETIMER_INDEX_SHIFT);
|
|
val |= PORT_CS_1_PND;
|
|
|
|
ret = tb_port_write(port, &val, TB_CFG_PORT,
|
|
port->cap_usb4 + PORT_CS_1, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = usb4_port_wait_for_bit(port, port->cap_usb4 + PORT_CS_1,
|
|
PORT_CS_1_PND, 0, 500);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = tb_port_read(port, &val, TB_CFG_PORT,
|
|
port->cap_usb4 + PORT_CS_1, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (val & PORT_CS_1_NR)
|
|
return -ENODEV;
|
|
if (val & PORT_CS_1_RC)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int usb4_port_sb_op(struct tb_port *port, enum usb4_sb_target target,
|
|
u8 index, enum usb4_sb_opcode opcode, int timeout_msec)
|
|
{
|
|
ktime_t timeout;
|
|
u32 val;
|
|
int ret;
|
|
|
|
val = opcode;
|
|
ret = usb4_port_sb_write(port, target, index, USB4_SB_OPCODE, &val,
|
|
sizeof(val));
|
|
if (ret)
|
|
return ret;
|
|
|
|
timeout = ktime_add_ms(ktime_get(), timeout_msec);
|
|
|
|
do {
|
|
/* Check results */
|
|
ret = usb4_port_sb_read(port, target, index, USB4_SB_OPCODE,
|
|
&val, sizeof(val));
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (val) {
|
|
case 0:
|
|
return 0;
|
|
|
|
case USB4_SB_OPCODE_ERR:
|
|
return -EAGAIN;
|
|
|
|
case USB4_SB_OPCODE_ONS:
|
|
return -EOPNOTSUPP;
|
|
|
|
default:
|
|
if (val != opcode)
|
|
return -EIO;
|
|
break;
|
|
}
|
|
} while (ktime_before(ktime_get(), timeout));
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int usb4_port_set_router_offline(struct tb_port *port, bool offline)
|
|
{
|
|
u32 val = !offline;
|
|
int ret;
|
|
|
|
ret = usb4_port_sb_write(port, USB4_SB_TARGET_ROUTER, 0,
|
|
USB4_SB_METADATA, &val, sizeof(val));
|
|
if (ret)
|
|
return ret;
|
|
|
|
val = USB4_SB_OPCODE_ROUTER_OFFLINE;
|
|
return usb4_port_sb_write(port, USB4_SB_TARGET_ROUTER, 0,
|
|
USB4_SB_OPCODE, &val, sizeof(val));
|
|
}
|
|
|
|
/**
|
|
* usb4_port_router_offline() - Put the USB4 port to offline mode
|
|
* @port: USB4 port
|
|
*
|
|
* This function puts the USB4 port into offline mode. In this mode the
|
|
* port does not react on hotplug events anymore. This needs to be
|
|
* called before retimer access is done when the USB4 links is not up.
|
|
*
|
|
* Returns %0 in case of success and negative errno if there was an
|
|
* error.
|
|
*/
|
|
int usb4_port_router_offline(struct tb_port *port)
|
|
{
|
|
return usb4_port_set_router_offline(port, true);
|
|
}
|
|
|
|
/**
|
|
* usb4_port_router_online() - Put the USB4 port back to online
|
|
* @port: USB4 port
|
|
*
|
|
* Makes the USB4 port functional again.
|
|
*/
|
|
int usb4_port_router_online(struct tb_port *port)
|
|
{
|
|
return usb4_port_set_router_offline(port, false);
|
|
}
|
|
|
|
/**
|
|
* usb4_port_enumerate_retimers() - Send RT broadcast transaction
|
|
* @port: USB4 port
|
|
*
|
|
* This forces the USB4 port to send broadcast RT transaction which
|
|
* makes the retimers on the link to assign index to themselves. Returns
|
|
* %0 in case of success and negative errno if there was an error.
|
|
*/
|
|
int usb4_port_enumerate_retimers(struct tb_port *port)
|
|
{
|
|
u32 val;
|
|
|
|
val = USB4_SB_OPCODE_ENUMERATE_RETIMERS;
|
|
return usb4_port_sb_write(port, USB4_SB_TARGET_ROUTER, 0,
|
|
USB4_SB_OPCODE, &val, sizeof(val));
|
|
}
|
|
|
|
/**
|
|
* usb4_port_clx_supported() - Check if CLx is supported by the link
|
|
* @port: Port to check for CLx support for
|
|
*
|
|
* PORT_CS_18_CPS bit reflects if the link supports CLx including
|
|
* active cables (if connected on the link).
|
|
*/
|
|
bool usb4_port_clx_supported(struct tb_port *port)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
ret = tb_port_read(port, &val, TB_CFG_PORT,
|
|
port->cap_usb4 + PORT_CS_18, 1);
|
|
if (ret)
|
|
return false;
|
|
|
|
return !!(val & PORT_CS_18_CPS);
|
|
}
|
|
|
|
static inline int usb4_port_retimer_op(struct tb_port *port, u8 index,
|
|
enum usb4_sb_opcode opcode,
|
|
int timeout_msec)
|
|
{
|
|
return usb4_port_sb_op(port, USB4_SB_TARGET_RETIMER, index, opcode,
|
|
timeout_msec);
|
|
}
|
|
|
|
/**
|
|
* usb4_port_retimer_set_inbound_sbtx() - Enable sideband channel transactions
|
|
* @port: USB4 port
|
|
* @index: Retimer index
|
|
*
|
|
* Enables sideband channel transations on SBTX. Can be used when USB4
|
|
* link does not go up, for example if there is no device connected.
|
|
*/
|
|
int usb4_port_retimer_set_inbound_sbtx(struct tb_port *port, u8 index)
|
|
{
|
|
int ret;
|
|
|
|
ret = usb4_port_retimer_op(port, index, USB4_SB_OPCODE_SET_INBOUND_SBTX,
|
|
500);
|
|
|
|
if (ret != -ENODEV)
|
|
return ret;
|
|
|
|
/*
|
|
* Per the USB4 retimer spec, the retimer is not required to
|
|
* send an RT (Retimer Transaction) response for the first
|
|
* SET_INBOUND_SBTX command
|
|
*/
|
|
return usb4_port_retimer_op(port, index, USB4_SB_OPCODE_SET_INBOUND_SBTX,
|
|
500);
|
|
}
|
|
|
|
/**
|
|
* usb4_port_retimer_read() - Read from retimer sideband registers
|
|
* @port: USB4 port
|
|
* @index: Retimer index
|
|
* @reg: Sideband register to read
|
|
* @buf: Data from @reg is stored here
|
|
* @size: Number of bytes to read
|
|
*
|
|
* Function reads retimer sideband registers starting from @reg. The
|
|
* retimer is connected to @port at @index. Returns %0 in case of
|
|
* success, and read data is copied to @buf. If there is no retimer
|
|
* present at given @index returns %-ENODEV. In any other failure
|
|
* returns negative errno.
|
|
*/
|
|
int usb4_port_retimer_read(struct tb_port *port, u8 index, u8 reg, void *buf,
|
|
u8 size)
|
|
{
|
|
return usb4_port_sb_read(port, USB4_SB_TARGET_RETIMER, index, reg, buf,
|
|
size);
|
|
}
|
|
|
|
/**
|
|
* usb4_port_retimer_write() - Write to retimer sideband registers
|
|
* @port: USB4 port
|
|
* @index: Retimer index
|
|
* @reg: Sideband register to write
|
|
* @buf: Data that is written starting from @reg
|
|
* @size: Number of bytes to write
|
|
*
|
|
* Writes retimer sideband registers starting from @reg. The retimer is
|
|
* connected to @port at @index. Returns %0 in case of success. If there
|
|
* is no retimer present at given @index returns %-ENODEV. In any other
|
|
* failure returns negative errno.
|
|
*/
|
|
int usb4_port_retimer_write(struct tb_port *port, u8 index, u8 reg,
|
|
const void *buf, u8 size)
|
|
{
|
|
return usb4_port_sb_write(port, USB4_SB_TARGET_RETIMER, index, reg, buf,
|
|
size);
|
|
}
|
|
|
|
/**
|
|
* usb4_port_retimer_is_last() - Is the retimer last on-board retimer
|
|
* @port: USB4 port
|
|
* @index: Retimer index
|
|
*
|
|
* If the retimer at @index is last one (connected directly to the
|
|
* Type-C port) this function returns %1. If it is not returns %0. If
|
|
* the retimer is not present returns %-ENODEV. Otherwise returns
|
|
* negative errno.
|
|
*/
|
|
int usb4_port_retimer_is_last(struct tb_port *port, u8 index)
|
|
{
|
|
u32 metadata;
|
|
int ret;
|
|
|
|
ret = usb4_port_retimer_op(port, index, USB4_SB_OPCODE_QUERY_LAST_RETIMER,
|
|
500);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = usb4_port_retimer_read(port, index, USB4_SB_METADATA, &metadata,
|
|
sizeof(metadata));
|
|
return ret ? ret : metadata & 1;
|
|
}
|
|
|
|
/**
|
|
* usb4_port_retimer_nvm_sector_size() - Read retimer NVM sector size
|
|
* @port: USB4 port
|
|
* @index: Retimer index
|
|
*
|
|
* Reads NVM sector size (in bytes) of a retimer at @index. This
|
|
* operation can be used to determine whether the retimer supports NVM
|
|
* upgrade for example. Returns sector size in bytes or negative errno
|
|
* in case of error. Specifically returns %-ENODEV if there is no
|
|
* retimer at @index.
|
|
*/
|
|
int usb4_port_retimer_nvm_sector_size(struct tb_port *port, u8 index)
|
|
{
|
|
u32 metadata;
|
|
int ret;
|
|
|
|
ret = usb4_port_retimer_op(port, index, USB4_SB_OPCODE_GET_NVM_SECTOR_SIZE,
|
|
500);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = usb4_port_retimer_read(port, index, USB4_SB_METADATA, &metadata,
|
|
sizeof(metadata));
|
|
return ret ? ret : metadata & USB4_NVM_SECTOR_SIZE_MASK;
|
|
}
|
|
|
|
/**
|
|
* usb4_port_retimer_nvm_set_offset() - Set NVM write offset
|
|
* @port: USB4 port
|
|
* @index: Retimer index
|
|
* @address: Start offset
|
|
*
|
|
* Exlicitly sets NVM write offset. Normally when writing to NVM this is
|
|
* done automatically by usb4_port_retimer_nvm_write().
|
|
*
|
|
* Returns %0 in success and negative errno if there was a failure.
|
|
*/
|
|
int usb4_port_retimer_nvm_set_offset(struct tb_port *port, u8 index,
|
|
unsigned int address)
|
|
{
|
|
u32 metadata, dwaddress;
|
|
int ret;
|
|
|
|
dwaddress = address / 4;
|
|
metadata = (dwaddress << USB4_NVM_SET_OFFSET_SHIFT) &
|
|
USB4_NVM_SET_OFFSET_MASK;
|
|
|
|
ret = usb4_port_retimer_write(port, index, USB4_SB_METADATA, &metadata,
|
|
sizeof(metadata));
|
|
if (ret)
|
|
return ret;
|
|
|
|
return usb4_port_retimer_op(port, index, USB4_SB_OPCODE_NVM_SET_OFFSET,
|
|
500);
|
|
}
|
|
|
|
struct retimer_info {
|
|
struct tb_port *port;
|
|
u8 index;
|
|
};
|
|
|
|
static int usb4_port_retimer_nvm_write_next_block(void *data,
|
|
unsigned int dwaddress, const void *buf, size_t dwords)
|
|
|
|
{
|
|
const struct retimer_info *info = data;
|
|
struct tb_port *port = info->port;
|
|
u8 index = info->index;
|
|
int ret;
|
|
|
|
ret = usb4_port_retimer_write(port, index, USB4_SB_DATA,
|
|
buf, dwords * 4);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return usb4_port_retimer_op(port, index,
|
|
USB4_SB_OPCODE_NVM_BLOCK_WRITE, 1000);
|
|
}
|
|
|
|
/**
|
|
* usb4_port_retimer_nvm_write() - Write to retimer NVM
|
|
* @port: USB4 port
|
|
* @index: Retimer index
|
|
* @address: Byte address where to start the write
|
|
* @buf: Data to write
|
|
* @size: Size in bytes how much to write
|
|
*
|
|
* Writes @size bytes from @buf to the retimer NVM. Used for NVM
|
|
* upgrade. Returns %0 if the data was written successfully and negative
|
|
* errno in case of failure. Specifically returns %-ENODEV if there is
|
|
* no retimer at @index.
|
|
*/
|
|
int usb4_port_retimer_nvm_write(struct tb_port *port, u8 index, unsigned int address,
|
|
const void *buf, size_t size)
|
|
{
|
|
struct retimer_info info = { .port = port, .index = index };
|
|
int ret;
|
|
|
|
ret = usb4_port_retimer_nvm_set_offset(port, index, address);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return tb_nvm_write_data(address, buf, size, USB4_DATA_RETRIES,
|
|
usb4_port_retimer_nvm_write_next_block, &info);
|
|
}
|
|
|
|
/**
|
|
* usb4_port_retimer_nvm_authenticate() - Start retimer NVM upgrade
|
|
* @port: USB4 port
|
|
* @index: Retimer index
|
|
*
|
|
* After the new NVM image has been written via usb4_port_retimer_nvm_write()
|
|
* this function can be used to trigger the NVM upgrade process. If
|
|
* successful the retimer restarts with the new NVM and may not have the
|
|
* index set so one needs to call usb4_port_enumerate_retimers() to
|
|
* force index to be assigned.
|
|
*/
|
|
int usb4_port_retimer_nvm_authenticate(struct tb_port *port, u8 index)
|
|
{
|
|
u32 val;
|
|
|
|
/*
|
|
* We need to use the raw operation here because once the
|
|
* authentication completes the retimer index is not set anymore
|
|
* so we do not get back the status now.
|
|
*/
|
|
val = USB4_SB_OPCODE_NVM_AUTH_WRITE;
|
|
return usb4_port_sb_write(port, USB4_SB_TARGET_RETIMER, index,
|
|
USB4_SB_OPCODE, &val, sizeof(val));
|
|
}
|
|
|
|
/**
|
|
* usb4_port_retimer_nvm_authenticate_status() - Read status of NVM upgrade
|
|
* @port: USB4 port
|
|
* @index: Retimer index
|
|
* @status: Raw status code read from metadata
|
|
*
|
|
* This can be called after usb4_port_retimer_nvm_authenticate() and
|
|
* usb4_port_enumerate_retimers() to fetch status of the NVM upgrade.
|
|
*
|
|
* Returns %0 if the authentication status was successfully read. The
|
|
* completion metadata (the result) is then stored into @status. If
|
|
* reading the status fails, returns negative errno.
|
|
*/
|
|
int usb4_port_retimer_nvm_authenticate_status(struct tb_port *port, u8 index,
|
|
u32 *status)
|
|
{
|
|
u32 metadata, val;
|
|
int ret;
|
|
|
|
ret = usb4_port_retimer_read(port, index, USB4_SB_OPCODE, &val,
|
|
sizeof(val));
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (val) {
|
|
case 0:
|
|
*status = 0;
|
|
return 0;
|
|
|
|
case USB4_SB_OPCODE_ERR:
|
|
ret = usb4_port_retimer_read(port, index, USB4_SB_METADATA,
|
|
&metadata, sizeof(metadata));
|
|
if (ret)
|
|
return ret;
|
|
|
|
*status = metadata & USB4_SB_METADATA_NVM_AUTH_WRITE_MASK;
|
|
return 0;
|
|
|
|
case USB4_SB_OPCODE_ONS:
|
|
return -EOPNOTSUPP;
|
|
|
|
default:
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
static int usb4_port_retimer_nvm_read_block(void *data, unsigned int dwaddress,
|
|
void *buf, size_t dwords)
|
|
{
|
|
const struct retimer_info *info = data;
|
|
struct tb_port *port = info->port;
|
|
u8 index = info->index;
|
|
u32 metadata;
|
|
int ret;
|
|
|
|
metadata = dwaddress << USB4_NVM_READ_OFFSET_SHIFT;
|
|
if (dwords < NVM_DATA_DWORDS)
|
|
metadata |= dwords << USB4_NVM_READ_LENGTH_SHIFT;
|
|
|
|
ret = usb4_port_retimer_write(port, index, USB4_SB_METADATA, &metadata,
|
|
sizeof(metadata));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = usb4_port_retimer_op(port, index, USB4_SB_OPCODE_NVM_READ, 500);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return usb4_port_retimer_read(port, index, USB4_SB_DATA, buf,
|
|
dwords * 4);
|
|
}
|
|
|
|
/**
|
|
* usb4_port_retimer_nvm_read() - Read contents of retimer NVM
|
|
* @port: USB4 port
|
|
* @index: Retimer index
|
|
* @address: NVM address (in bytes) to start reading
|
|
* @buf: Data read from NVM is stored here
|
|
* @size: Number of bytes to read
|
|
*
|
|
* Reads retimer NVM and copies the contents to @buf. Returns %0 if the
|
|
* read was successful and negative errno in case of failure.
|
|
* Specifically returns %-ENODEV if there is no retimer at @index.
|
|
*/
|
|
int usb4_port_retimer_nvm_read(struct tb_port *port, u8 index,
|
|
unsigned int address, void *buf, size_t size)
|
|
{
|
|
struct retimer_info info = { .port = port, .index = index };
|
|
|
|
return tb_nvm_read_data(address, buf, size, USB4_DATA_RETRIES,
|
|
usb4_port_retimer_nvm_read_block, &info);
|
|
}
|
|
|
|
/**
|
|
* usb4_usb3_port_max_link_rate() - Maximum support USB3 link rate
|
|
* @port: USB3 adapter port
|
|
*
|
|
* Return maximum supported link rate of a USB3 adapter in Mb/s.
|
|
* Negative errno in case of error.
|
|
*/
|
|
int usb4_usb3_port_max_link_rate(struct tb_port *port)
|
|
{
|
|
int ret, lr;
|
|
u32 val;
|
|
|
|
if (!tb_port_is_usb3_down(port) && !tb_port_is_usb3_up(port))
|
|
return -EINVAL;
|
|
|
|
ret = tb_port_read(port, &val, TB_CFG_PORT,
|
|
port->cap_adap + ADP_USB3_CS_4, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
lr = (val & ADP_USB3_CS_4_MSLR_MASK) >> ADP_USB3_CS_4_MSLR_SHIFT;
|
|
return lr == ADP_USB3_CS_4_MSLR_20G ? 20000 : 10000;
|
|
}
|
|
|
|
/**
|
|
* usb4_usb3_port_actual_link_rate() - Established USB3 link rate
|
|
* @port: USB3 adapter port
|
|
*
|
|
* Return actual established link rate of a USB3 adapter in Mb/s. If the
|
|
* link is not up returns %0 and negative errno in case of failure.
|
|
*/
|
|
int usb4_usb3_port_actual_link_rate(struct tb_port *port)
|
|
{
|
|
int ret, lr;
|
|
u32 val;
|
|
|
|
if (!tb_port_is_usb3_down(port) && !tb_port_is_usb3_up(port))
|
|
return -EINVAL;
|
|
|
|
ret = tb_port_read(port, &val, TB_CFG_PORT,
|
|
port->cap_adap + ADP_USB3_CS_4, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!(val & ADP_USB3_CS_4_ULV))
|
|
return 0;
|
|
|
|
lr = val & ADP_USB3_CS_4_ALR_MASK;
|
|
return lr == ADP_USB3_CS_4_ALR_20G ? 20000 : 10000;
|
|
}
|
|
|
|
static int usb4_usb3_port_cm_request(struct tb_port *port, bool request)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
if (!tb_port_is_usb3_down(port))
|
|
return -EINVAL;
|
|
if (tb_route(port->sw))
|
|
return -EINVAL;
|
|
|
|
ret = tb_port_read(port, &val, TB_CFG_PORT,
|
|
port->cap_adap + ADP_USB3_CS_2, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (request)
|
|
val |= ADP_USB3_CS_2_CMR;
|
|
else
|
|
val &= ~ADP_USB3_CS_2_CMR;
|
|
|
|
ret = tb_port_write(port, &val, TB_CFG_PORT,
|
|
port->cap_adap + ADP_USB3_CS_2, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* We can use val here directly as the CMR bit is in the same place
|
|
* as HCA. Just mask out others.
|
|
*/
|
|
val &= ADP_USB3_CS_2_CMR;
|
|
return usb4_port_wait_for_bit(port, port->cap_adap + ADP_USB3_CS_1,
|
|
ADP_USB3_CS_1_HCA, val, 1500);
|
|
}
|
|
|
|
static inline int usb4_usb3_port_set_cm_request(struct tb_port *port)
|
|
{
|
|
return usb4_usb3_port_cm_request(port, true);
|
|
}
|
|
|
|
static inline int usb4_usb3_port_clear_cm_request(struct tb_port *port)
|
|
{
|
|
return usb4_usb3_port_cm_request(port, false);
|
|
}
|
|
|
|
static unsigned int usb3_bw_to_mbps(u32 bw, u8 scale)
|
|
{
|
|
unsigned long uframes;
|
|
|
|
uframes = bw * 512UL << scale;
|
|
return DIV_ROUND_CLOSEST(uframes * 8000, 1000 * 1000);
|
|
}
|
|
|
|
static u32 mbps_to_usb3_bw(unsigned int mbps, u8 scale)
|
|
{
|
|
unsigned long uframes;
|
|
|
|
/* 1 uframe is 1/8 ms (125 us) -> 1 / 8000 s */
|
|
uframes = ((unsigned long)mbps * 1000 * 1000) / 8000;
|
|
return DIV_ROUND_UP(uframes, 512UL << scale);
|
|
}
|
|
|
|
static int usb4_usb3_port_read_allocated_bandwidth(struct tb_port *port,
|
|
int *upstream_bw,
|
|
int *downstream_bw)
|
|
{
|
|
u32 val, bw, scale;
|
|
int ret;
|
|
|
|
ret = tb_port_read(port, &val, TB_CFG_PORT,
|
|
port->cap_adap + ADP_USB3_CS_2, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = tb_port_read(port, &scale, TB_CFG_PORT,
|
|
port->cap_adap + ADP_USB3_CS_3, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
scale &= ADP_USB3_CS_3_SCALE_MASK;
|
|
|
|
bw = val & ADP_USB3_CS_2_AUBW_MASK;
|
|
*upstream_bw = usb3_bw_to_mbps(bw, scale);
|
|
|
|
bw = (val & ADP_USB3_CS_2_ADBW_MASK) >> ADP_USB3_CS_2_ADBW_SHIFT;
|
|
*downstream_bw = usb3_bw_to_mbps(bw, scale);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* usb4_usb3_port_allocated_bandwidth() - Bandwidth allocated for USB3
|
|
* @port: USB3 adapter port
|
|
* @upstream_bw: Allocated upstream bandwidth is stored here
|
|
* @downstream_bw: Allocated downstream bandwidth is stored here
|
|
*
|
|
* Stores currently allocated USB3 bandwidth into @upstream_bw and
|
|
* @downstream_bw in Mb/s. Returns %0 in case of success and negative
|
|
* errno in failure.
|
|
*/
|
|
int usb4_usb3_port_allocated_bandwidth(struct tb_port *port, int *upstream_bw,
|
|
int *downstream_bw)
|
|
{
|
|
int ret;
|
|
|
|
ret = usb4_usb3_port_set_cm_request(port);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = usb4_usb3_port_read_allocated_bandwidth(port, upstream_bw,
|
|
downstream_bw);
|
|
usb4_usb3_port_clear_cm_request(port);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int usb4_usb3_port_read_consumed_bandwidth(struct tb_port *port,
|
|
int *upstream_bw,
|
|
int *downstream_bw)
|
|
{
|
|
u32 val, bw, scale;
|
|
int ret;
|
|
|
|
ret = tb_port_read(port, &val, TB_CFG_PORT,
|
|
port->cap_adap + ADP_USB3_CS_1, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = tb_port_read(port, &scale, TB_CFG_PORT,
|
|
port->cap_adap + ADP_USB3_CS_3, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
scale &= ADP_USB3_CS_3_SCALE_MASK;
|
|
|
|
bw = val & ADP_USB3_CS_1_CUBW_MASK;
|
|
*upstream_bw = usb3_bw_to_mbps(bw, scale);
|
|
|
|
bw = (val & ADP_USB3_CS_1_CDBW_MASK) >> ADP_USB3_CS_1_CDBW_SHIFT;
|
|
*downstream_bw = usb3_bw_to_mbps(bw, scale);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int usb4_usb3_port_write_allocated_bandwidth(struct tb_port *port,
|
|
int upstream_bw,
|
|
int downstream_bw)
|
|
{
|
|
u32 val, ubw, dbw, scale;
|
|
int ret;
|
|
|
|
/* Read the used scale, hardware default is 0 */
|
|
ret = tb_port_read(port, &scale, TB_CFG_PORT,
|
|
port->cap_adap + ADP_USB3_CS_3, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
scale &= ADP_USB3_CS_3_SCALE_MASK;
|
|
ubw = mbps_to_usb3_bw(upstream_bw, scale);
|
|
dbw = mbps_to_usb3_bw(downstream_bw, scale);
|
|
|
|
ret = tb_port_read(port, &val, TB_CFG_PORT,
|
|
port->cap_adap + ADP_USB3_CS_2, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val &= ~(ADP_USB3_CS_2_AUBW_MASK | ADP_USB3_CS_2_ADBW_MASK);
|
|
val |= dbw << ADP_USB3_CS_2_ADBW_SHIFT;
|
|
val |= ubw;
|
|
|
|
return tb_port_write(port, &val, TB_CFG_PORT,
|
|
port->cap_adap + ADP_USB3_CS_2, 1);
|
|
}
|
|
|
|
/**
|
|
* usb4_usb3_port_allocate_bandwidth() - Allocate bandwidth for USB3
|
|
* @port: USB3 adapter port
|
|
* @upstream_bw: New upstream bandwidth
|
|
* @downstream_bw: New downstream bandwidth
|
|
*
|
|
* This can be used to set how much bandwidth is allocated for the USB3
|
|
* tunneled isochronous traffic. @upstream_bw and @downstream_bw are the
|
|
* new values programmed to the USB3 adapter allocation registers. If
|
|
* the values are lower than what is currently consumed the allocation
|
|
* is set to what is currently consumed instead (consumed bandwidth
|
|
* cannot be taken away by CM). The actual new values are returned in
|
|
* @upstream_bw and @downstream_bw.
|
|
*
|
|
* Returns %0 in case of success and negative errno if there was a
|
|
* failure.
|
|
*/
|
|
int usb4_usb3_port_allocate_bandwidth(struct tb_port *port, int *upstream_bw,
|
|
int *downstream_bw)
|
|
{
|
|
int ret, consumed_up, consumed_down, allocate_up, allocate_down;
|
|
|
|
ret = usb4_usb3_port_set_cm_request(port);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = usb4_usb3_port_read_consumed_bandwidth(port, &consumed_up,
|
|
&consumed_down);
|
|
if (ret)
|
|
goto err_request;
|
|
|
|
/* Don't allow it go lower than what is consumed */
|
|
allocate_up = max(*upstream_bw, consumed_up);
|
|
allocate_down = max(*downstream_bw, consumed_down);
|
|
|
|
ret = usb4_usb3_port_write_allocated_bandwidth(port, allocate_up,
|
|
allocate_down);
|
|
if (ret)
|
|
goto err_request;
|
|
|
|
*upstream_bw = allocate_up;
|
|
*downstream_bw = allocate_down;
|
|
|
|
err_request:
|
|
usb4_usb3_port_clear_cm_request(port);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* usb4_usb3_port_release_bandwidth() - Release allocated USB3 bandwidth
|
|
* @port: USB3 adapter port
|
|
* @upstream_bw: New allocated upstream bandwidth
|
|
* @downstream_bw: New allocated downstream bandwidth
|
|
*
|
|
* Releases USB3 allocated bandwidth down to what is actually consumed.
|
|
* The new bandwidth is returned in @upstream_bw and @downstream_bw.
|
|
*
|
|
* Returns 0% in success and negative errno in case of failure.
|
|
*/
|
|
int usb4_usb3_port_release_bandwidth(struct tb_port *port, int *upstream_bw,
|
|
int *downstream_bw)
|
|
{
|
|
int ret, consumed_up, consumed_down;
|
|
|
|
ret = usb4_usb3_port_set_cm_request(port);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = usb4_usb3_port_read_consumed_bandwidth(port, &consumed_up,
|
|
&consumed_down);
|
|
if (ret)
|
|
goto err_request;
|
|
|
|
/*
|
|
* Always keep 1000 Mb/s to make sure xHCI has at least some
|
|
* bandwidth available for isochronous traffic.
|
|
*/
|
|
if (consumed_up < 1000)
|
|
consumed_up = 1000;
|
|
if (consumed_down < 1000)
|
|
consumed_down = 1000;
|
|
|
|
ret = usb4_usb3_port_write_allocated_bandwidth(port, consumed_up,
|
|
consumed_down);
|
|
if (ret)
|
|
goto err_request;
|
|
|
|
*upstream_bw = consumed_up;
|
|
*downstream_bw = consumed_down;
|
|
|
|
err_request:
|
|
usb4_usb3_port_clear_cm_request(port);
|
|
return ret;
|
|
}
|