436 lines
12 KiB
C
436 lines
12 KiB
C
/*
|
|
* drivers/leds/leds-mlxcpld.c
|
|
* Copyright (c) 2016 Mellanox Technologies. All rights reserved.
|
|
* Copyright (c) 2016 Vadim Pasternak <vadimp@mellanox.com>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the names of the copyright holders nor the names of its
|
|
* contributors may be used to endorse or promote products derived from
|
|
* this software without specific prior written permission.
|
|
*
|
|
* Alternatively, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") version 2 as published by the Free
|
|
* Software Foundation.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/device.h>
|
|
#include <linux/dmi.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/io.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define MLXPLAT_CPLD_LPC_REG_BASE_ADRR 0x2500 /* LPC bus access */
|
|
|
|
/* Color codes for LEDs */
|
|
#define MLXCPLD_LED_OFFSET_HALF 0x01 /* Offset from solid: 3Hz blink */
|
|
#define MLXCPLD_LED_OFFSET_FULL 0x02 /* Offset from solid: 6Hz blink */
|
|
#define MLXCPLD_LED_IS_OFF 0x00 /* Off */
|
|
#define MLXCPLD_LED_RED_STATIC_ON 0x05 /* Solid red */
|
|
#define MLXCPLD_LED_RED_BLINK_HALF (MLXCPLD_LED_RED_STATIC_ON + \
|
|
MLXCPLD_LED_OFFSET_HALF)
|
|
#define MLXCPLD_LED_RED_BLINK_FULL (MLXCPLD_LED_RED_STATIC_ON + \
|
|
MLXCPLD_LED_OFFSET_FULL)
|
|
#define MLXCPLD_LED_GREEN_STATIC_ON 0x0D /* Solid green */
|
|
#define MLXCPLD_LED_GREEN_BLINK_HALF (MLXCPLD_LED_GREEN_STATIC_ON + \
|
|
MLXCPLD_LED_OFFSET_HALF)
|
|
#define MLXCPLD_LED_GREEN_BLINK_FULL (MLXCPLD_LED_GREEN_STATIC_ON + \
|
|
MLXCPLD_LED_OFFSET_FULL)
|
|
#define MLXCPLD_LED_BLINK_3HZ 167 /* ~167 msec off/on */
|
|
#define MLXCPLD_LED_BLINK_6HZ 83 /* ~83 msec off/on */
|
|
|
|
/**
|
|
* struct mlxcpld_param - LED access parameters:
|
|
* @offset: offset for LED access in CPLD device
|
|
* @mask: mask for LED access in CPLD device
|
|
* @base_color: base color code for LED
|
|
**/
|
|
struct mlxcpld_param {
|
|
u8 offset;
|
|
u8 mask;
|
|
u8 base_color;
|
|
};
|
|
|
|
/**
|
|
* struct mlxcpld_led_priv - LED private data:
|
|
* @cled: LED class device instance
|
|
* @param: LED CPLD access parameters
|
|
**/
|
|
struct mlxcpld_led_priv {
|
|
struct led_classdev cdev;
|
|
struct mlxcpld_param param;
|
|
};
|
|
|
|
#define cdev_to_priv(c) container_of(c, struct mlxcpld_led_priv, cdev)
|
|
|
|
/**
|
|
* struct mlxcpld_led_profile - system LED profile (defined per system class):
|
|
* @offset: offset for LED access in CPLD device
|
|
* @mask: mask for LED access in CPLD device
|
|
* @base_color: base color code
|
|
* @brightness: default brightness setting (on/off)
|
|
* @name: LED name
|
|
**/
|
|
struct mlxcpld_led_profile {
|
|
u8 offset;
|
|
u8 mask;
|
|
u8 base_color;
|
|
enum led_brightness brightness;
|
|
const char *name;
|
|
};
|
|
|
|
/**
|
|
* struct mlxcpld_led_pdata - system LED private data
|
|
* @pdev: platform device pointer
|
|
* @pled: LED class device instance
|
|
* @profile: system configuration profile
|
|
* @num_led_instances: number of LED instances
|
|
* @lock: device access lock
|
|
**/
|
|
struct mlxcpld_led_pdata {
|
|
struct platform_device *pdev;
|
|
struct mlxcpld_led_priv *pled;
|
|
struct mlxcpld_led_profile *profile;
|
|
int num_led_instances;
|
|
spinlock_t lock;
|
|
};
|
|
|
|
static struct mlxcpld_led_pdata *mlxcpld_led;
|
|
|
|
/* Default profile fit the next Mellanox systems:
|
|
* "msx6710", "msx6720", "msb7700", "msn2700", "msx1410",
|
|
* "msn2410", "msb7800", "msn2740"
|
|
*/
|
|
static struct mlxcpld_led_profile mlxcpld_led_default_profile[] = {
|
|
{
|
|
0x21, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
|
|
"mlxcpld:fan1:green",
|
|
},
|
|
{
|
|
0x21, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
|
|
"mlxcpld:fan1:red",
|
|
},
|
|
{
|
|
0x21, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
|
|
"mlxcpld:fan2:green",
|
|
},
|
|
{
|
|
0x21, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
|
|
"mlxcpld:fan2:red",
|
|
},
|
|
{
|
|
0x22, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
|
|
"mlxcpld:fan3:green",
|
|
},
|
|
{
|
|
0x22, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
|
|
"mlxcpld:fan3:red",
|
|
},
|
|
{
|
|
0x22, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
|
|
"mlxcpld:fan4:green",
|
|
},
|
|
{
|
|
0x22, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
|
|
"mlxcpld:fan4:red",
|
|
},
|
|
{
|
|
0x20, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
|
|
"mlxcpld:psu:green",
|
|
},
|
|
{
|
|
0x20, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
|
|
"mlxcpld:psu:red",
|
|
},
|
|
{
|
|
0x20, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
|
|
"mlxcpld:status:green",
|
|
},
|
|
{
|
|
0x20, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
|
|
"mlxcpld:status:red",
|
|
},
|
|
};
|
|
|
|
/* Profile fit the Mellanox systems based on "msn2100" */
|
|
static struct mlxcpld_led_profile mlxcpld_led_msn2100_profile[] = {
|
|
{
|
|
0x21, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
|
|
"mlxcpld:fan:green",
|
|
},
|
|
{
|
|
0x21, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
|
|
"mlxcpld:fan:red",
|
|
},
|
|
{
|
|
0x23, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
|
|
"mlxcpld:psu1:green",
|
|
},
|
|
{
|
|
0x23, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
|
|
"mlxcpld:psu1:red",
|
|
},
|
|
{
|
|
0x23, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
|
|
"mlxcpld:psu2:green",
|
|
},
|
|
{
|
|
0x23, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
|
|
"mlxcpld:psu2:red",
|
|
},
|
|
{
|
|
0x20, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
|
|
"mlxcpld:status:green",
|
|
},
|
|
{
|
|
0x20, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
|
|
"mlxcpld:status:red",
|
|
},
|
|
{
|
|
0x24, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, LED_OFF,
|
|
"mlxcpld:uid:blue",
|
|
},
|
|
};
|
|
|
|
enum mlxcpld_led_platform_types {
|
|
MLXCPLD_LED_PLATFORM_DEFAULT,
|
|
MLXCPLD_LED_PLATFORM_MSN2100,
|
|
};
|
|
|
|
static const char *mlx_product_names[] = {
|
|
"DEFAULT",
|
|
"MSN2100",
|
|
};
|
|
|
|
static enum
|
|
mlxcpld_led_platform_types mlxcpld_led_platform_check_sys_type(void)
|
|
{
|
|
const char *mlx_product_name;
|
|
int i;
|
|
|
|
mlx_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
|
|
if (!mlx_product_name)
|
|
return MLXCPLD_LED_PLATFORM_DEFAULT;
|
|
|
|
for (i = 1; i < ARRAY_SIZE(mlx_product_names); i++) {
|
|
if (strstr(mlx_product_name, mlx_product_names[i]))
|
|
return i;
|
|
}
|
|
|
|
return MLXCPLD_LED_PLATFORM_DEFAULT;
|
|
}
|
|
|
|
static void mlxcpld_led_bus_access_func(u16 base, u8 offset, u8 rw_flag,
|
|
u8 *data)
|
|
{
|
|
u32 addr = base + offset;
|
|
|
|
if (rw_flag == 0)
|
|
outb(*data, addr);
|
|
else
|
|
*data = inb(addr);
|
|
}
|
|
|
|
static void mlxcpld_led_store_hw(u8 mask, u8 off, u8 vset)
|
|
{
|
|
u8 nib, val;
|
|
|
|
/*
|
|
* Each LED is controlled through low or high nibble of the relevant
|
|
* CPLD register. Register offset is specified by off parameter.
|
|
* Parameter vset provides color code: 0x0 for off, 0x5 for solid red,
|
|
* 0x6 for 3Hz blink red, 0xd for solid green, 0xe for 3Hz blink
|
|
* green.
|
|
* Parameter mask specifies which nibble is used for specific LED: mask
|
|
* 0xf0 - lower nibble is to be used (bits from 0 to 3), mask 0x0f -
|
|
* higher nibble (bits from 4 to 7).
|
|
*/
|
|
spin_lock(&mlxcpld_led->lock);
|
|
mlxcpld_led_bus_access_func(MLXPLAT_CPLD_LPC_REG_BASE_ADRR, off, 1,
|
|
&val);
|
|
nib = (mask == 0xf0) ? vset : (vset << 4);
|
|
val = (val & mask) | nib;
|
|
mlxcpld_led_bus_access_func(MLXPLAT_CPLD_LPC_REG_BASE_ADRR, off, 0,
|
|
&val);
|
|
spin_unlock(&mlxcpld_led->lock);
|
|
}
|
|
|
|
static void mlxcpld_led_brightness_set(struct led_classdev *led,
|
|
enum led_brightness value)
|
|
{
|
|
struct mlxcpld_led_priv *pled = cdev_to_priv(led);
|
|
|
|
if (value) {
|
|
mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
|
|
pled->param.base_color);
|
|
return;
|
|
}
|
|
|
|
mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
|
|
MLXCPLD_LED_IS_OFF);
|
|
}
|
|
|
|
static int mlxcpld_led_blink_set(struct led_classdev *led,
|
|
unsigned long *delay_on,
|
|
unsigned long *delay_off)
|
|
{
|
|
struct mlxcpld_led_priv *pled = cdev_to_priv(led);
|
|
|
|
/*
|
|
* HW supports two types of blinking: full (6Hz) and half (3Hz).
|
|
* For delay on/off zero default setting 3Hz is used.
|
|
*/
|
|
if (!(*delay_on == 0 && *delay_off == 0) &&
|
|
!(*delay_on == MLXCPLD_LED_BLINK_3HZ &&
|
|
*delay_off == MLXCPLD_LED_BLINK_3HZ) &&
|
|
!(*delay_on == MLXCPLD_LED_BLINK_6HZ &&
|
|
*delay_off == MLXCPLD_LED_BLINK_6HZ))
|
|
return -EINVAL;
|
|
|
|
if (*delay_on == MLXCPLD_LED_BLINK_6HZ)
|
|
mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
|
|
pled->param.base_color +
|
|
MLXCPLD_LED_OFFSET_FULL);
|
|
else
|
|
mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
|
|
pled->param.base_color +
|
|
MLXCPLD_LED_OFFSET_HALF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mlxcpld_led_config(struct device *dev,
|
|
struct mlxcpld_led_pdata *cpld)
|
|
{
|
|
int i;
|
|
int err;
|
|
|
|
cpld->pled = devm_kcalloc(dev,
|
|
cpld->num_led_instances,
|
|
sizeof(struct mlxcpld_led_priv),
|
|
GFP_KERNEL);
|
|
if (!cpld->pled)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < cpld->num_led_instances; i++) {
|
|
cpld->pled[i].cdev.name = cpld->profile[i].name;
|
|
cpld->pled[i].cdev.brightness = cpld->profile[i].brightness;
|
|
cpld->pled[i].cdev.max_brightness = 1;
|
|
cpld->pled[i].cdev.brightness_set = mlxcpld_led_brightness_set;
|
|
cpld->pled[i].cdev.blink_set = mlxcpld_led_blink_set;
|
|
cpld->pled[i].cdev.flags = LED_CORE_SUSPENDRESUME;
|
|
err = devm_led_classdev_register(dev, &cpld->pled[i].cdev);
|
|
if (err)
|
|
return err;
|
|
|
|
cpld->pled[i].param.offset = mlxcpld_led->profile[i].offset;
|
|
cpld->pled[i].param.mask = mlxcpld_led->profile[i].mask;
|
|
cpld->pled[i].param.base_color =
|
|
mlxcpld_led->profile[i].base_color;
|
|
|
|
if (mlxcpld_led->profile[i].brightness)
|
|
mlxcpld_led_brightness_set(&cpld->pled[i].cdev,
|
|
mlxcpld_led->profile[i].brightness);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init mlxcpld_led_probe(struct platform_device *pdev)
|
|
{
|
|
enum mlxcpld_led_platform_types mlxcpld_led_plat =
|
|
mlxcpld_led_platform_check_sys_type();
|
|
|
|
mlxcpld_led = devm_kzalloc(&pdev->dev, sizeof(*mlxcpld_led),
|
|
GFP_KERNEL);
|
|
if (!mlxcpld_led)
|
|
return -ENOMEM;
|
|
|
|
mlxcpld_led->pdev = pdev;
|
|
|
|
switch (mlxcpld_led_plat) {
|
|
case MLXCPLD_LED_PLATFORM_MSN2100:
|
|
mlxcpld_led->profile = mlxcpld_led_msn2100_profile;
|
|
mlxcpld_led->num_led_instances =
|
|
ARRAY_SIZE(mlxcpld_led_msn2100_profile);
|
|
break;
|
|
|
|
default:
|
|
mlxcpld_led->profile = mlxcpld_led_default_profile;
|
|
mlxcpld_led->num_led_instances =
|
|
ARRAY_SIZE(mlxcpld_led_default_profile);
|
|
break;
|
|
}
|
|
|
|
spin_lock_init(&mlxcpld_led->lock);
|
|
|
|
return mlxcpld_led_config(&pdev->dev, mlxcpld_led);
|
|
}
|
|
|
|
static struct platform_driver mlxcpld_led_driver = {
|
|
.driver = {
|
|
.name = KBUILD_MODNAME,
|
|
},
|
|
};
|
|
|
|
static int __init mlxcpld_led_init(void)
|
|
{
|
|
struct platform_device *pdev;
|
|
int err;
|
|
|
|
if (!dmi_match(DMI_CHASSIS_VENDOR, "Mellanox Technologies Ltd."))
|
|
return -ENODEV;
|
|
|
|
pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0);
|
|
if (IS_ERR(pdev)) {
|
|
pr_err("Device allocation failed\n");
|
|
return PTR_ERR(pdev);
|
|
}
|
|
|
|
err = platform_driver_probe(&mlxcpld_led_driver, mlxcpld_led_probe);
|
|
if (err) {
|
|
pr_err("Probe platform driver failed\n");
|
|
platform_device_unregister(pdev);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static void __exit mlxcpld_led_exit(void)
|
|
{
|
|
platform_device_unregister(mlxcpld_led->pdev);
|
|
platform_driver_unregister(&mlxcpld_led_driver);
|
|
}
|
|
|
|
module_init(mlxcpld_led_init);
|
|
module_exit(mlxcpld_led_exit);
|
|
|
|
MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
|
|
MODULE_DESCRIPTION("Mellanox board LED driver");
|
|
MODULE_LICENSE("Dual BSD/GPL");
|
|
MODULE_ALIAS("platform:leds_mlxcpld");
|