369 lines
10 KiB
Plaintext
369 lines
10 KiB
Plaintext
/*
|
|
* Device Tree Source for AMCC Redwood(460SX)
|
|
*
|
|
* Copyright 2008 AMCC <tmarri@amcc.com>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without
|
|
* any warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
model = "amcc,redwood";
|
|
compatible = "amcc,redwood";
|
|
dcr-parent = <&{/cpus/cpu@0}>;
|
|
|
|
aliases {
|
|
ethernet0 = &EMAC0;
|
|
serial0 = &UART0;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
model = "PowerPC,460SX";
|
|
reg = <0x00000000>;
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
timebase-frequency = <0>; /* Filled in by U-Boot */
|
|
i-cache-line-size = <32>;
|
|
d-cache-line-size = <32>;
|
|
i-cache-size = <32768>;
|
|
d-cache-size = <32768>;
|
|
dcr-controller;
|
|
dcr-access-method = "native";
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
|
|
};
|
|
|
|
UIC0: interrupt-controller0 {
|
|
compatible = "ibm,uic-460sx","ibm,uic";
|
|
interrupt-controller;
|
|
cell-index = <0>;
|
|
dcr-reg = <0x0c0 0x009>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
UIC1: interrupt-controller1 {
|
|
compatible = "ibm,uic-460sx","ibm,uic";
|
|
interrupt-controller;
|
|
cell-index = <1>;
|
|
dcr-reg = <0x0d0 0x009>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
|
|
interrupt-parent = <&UIC0>;
|
|
};
|
|
|
|
UIC2: interrupt-controller2 {
|
|
compatible = "ibm,uic-460sx","ibm,uic";
|
|
interrupt-controller;
|
|
cell-index = <2>;
|
|
dcr-reg = <0x0e0 0x009>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
|
|
interrupt-parent = <&UIC0>;
|
|
};
|
|
|
|
UIC3: interrupt-controller3 {
|
|
compatible = "ibm,uic-460sx","ibm,uic";
|
|
interrupt-controller;
|
|
cell-index = <3>;
|
|
dcr-reg = <0x0f0 0x009>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
|
|
interrupt-parent = <&UIC0>;
|
|
};
|
|
|
|
SDR0: sdr {
|
|
compatible = "ibm,sdr-460sx";
|
|
dcr-reg = <0x00e 0x002>;
|
|
};
|
|
|
|
CPR0: cpr {
|
|
compatible = "ibm,cpr-460sx";
|
|
dcr-reg = <0x00c 0x002>;
|
|
};
|
|
|
|
plb {
|
|
compatible = "ibm,plb-460sx", "ibm,plb4";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
|
|
SDRAM0: sdram {
|
|
compatible = "ibm,sdram-460sx", "ibm,sdram-405gp";
|
|
dcr-reg = <0x010 0x002>;
|
|
};
|
|
|
|
MAL0: mcmal {
|
|
compatible = "ibm,mcmal-460sx", "ibm,mcmal2";
|
|
dcr-reg = <0x180 0x62>;
|
|
num-tx-chans = <4>;
|
|
num-rx-chans = <32>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-parent = <&UIC1>;
|
|
interrupts = < /*TXEOB*/ 0x6 0x4
|
|
/*RXEOB*/ 0x7 0x4
|
|
/*SERR*/ 0x1 0x4
|
|
/*TXDE*/ 0x2 0x4
|
|
/*RXDE*/ 0x3 0x4
|
|
/*COAL TX0*/ 0x18 0x2
|
|
/*COAL TX1*/ 0x19 0x2
|
|
/*COAL TX2*/ 0x1a 0x2
|
|
/*COAL TX3*/ 0x1b 0x2
|
|
/*COAL RX0*/ 0x1c 0x2
|
|
/*COAL RX1*/ 0x1d 0x2
|
|
/*COAL RX2*/ 0x1e 0x2
|
|
/*COAL RX3*/ 0x1f 0x2>;
|
|
};
|
|
|
|
POB0: opb {
|
|
compatible = "ibm,opb-460sx", "ibm,opb";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
|
|
EBC0: ebc {
|
|
compatible = "ibm,ebc-460sx", "ibm,ebc";
|
|
dcr-reg = <0x012 0x002>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
/* ranges property is supplied by U-Boot */
|
|
interrupts = <0x6 0x4>;
|
|
interrupt-parent = <&UIC1>;
|
|
|
|
nor_flash@0,0 {
|
|
compatible = "amd,s29gl512n", "cfi-flash";
|
|
bank-width = <2>;
|
|
reg = <0x0000000 0x00000000 0x04000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
partition@0 {
|
|
label = "kernel";
|
|
reg = <0x00000000 0x001e0000>;
|
|
};
|
|
partition@1e0000 {
|
|
label = "dtb";
|
|
reg = <0x001e0000 0x00020000>;
|
|
};
|
|
partition@200000 {
|
|
label = "ramdisk";
|
|
reg = <0x00200000 0x01400000>;
|
|
};
|
|
partition@1600000 {
|
|
label = "jffs2";
|
|
reg = <0x01600000 0x00400000>;
|
|
};
|
|
partition@1a00000 {
|
|
label = "user";
|
|
reg = <0x01a00000 0x02560000>;
|
|
};
|
|
partition@3f60000 {
|
|
label = "env";
|
|
reg = <0x03f60000 0x00040000>;
|
|
};
|
|
partition@3fa0000 {
|
|
label = "u-boot";
|
|
reg = <0x03fa0000 0x00060000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
UART0: serial@ef600200 {
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0xef600200 0x00000008>;
|
|
virtual-reg = <0xef600200>;
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
current-speed = <0>; /* Filled in by U-Boot */
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0x0 0x4>;
|
|
};
|
|
|
|
RGMII0: emac-rgmii@ef600900 {
|
|
compatible = "ibm,rgmii-460sx", "ibm,rgmii";
|
|
reg = <0xef600900 0x00000008>;
|
|
};
|
|
|
|
EMAC0: ethernet@ef600a00 {
|
|
device_type = "network";
|
|
compatible = "ibm,emac-460sx", "ibm,emac4";
|
|
interrupt-parent = <&EMAC0>;
|
|
interrupts = <0x0 0x1>;
|
|
#interrupt-cells = <1>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4
|
|
/*Wake*/ 0x1 &UIC2 0x1d 0x4>;
|
|
reg = <0xef600a00 0x00000070>;
|
|
local-mac-address = [000000000000]; /* Filled in by U-Boot */
|
|
mal-device = <&MAL0>;
|
|
mal-tx-channel = <0>;
|
|
mal-rx-channel = <0>;
|
|
cell-index = <0>;
|
|
max-frame-size = <9000>;
|
|
rx-fifo-size = <4096>;
|
|
tx-fifo-size = <2048>;
|
|
rx-fifo-size-gige = <16384>;
|
|
phy-mode = "rgmii";
|
|
phy-map = <0x00000000>;
|
|
rgmii-device = <&RGMII0>;
|
|
rgmii-channel = <0>;
|
|
has-inverted-stacr-oc;
|
|
has-new-stacr-staopc;
|
|
};
|
|
};
|
|
PCIE0: pcie@d00000000 {
|
|
device_type = "pci";
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
|
|
primary;
|
|
port = <0x0>; /* port number */
|
|
reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
|
|
0x0000000c 0x10000000 0x00001000>; /* Registers */
|
|
dcr-reg = <0x100 0x020>;
|
|
sdr-base = <0x300>;
|
|
|
|
/* Outbound ranges, one memory and one IO,
|
|
* later cannot be changed
|
|
*/
|
|
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
|
|
0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
|
|
|
|
/* Inbound 2GB range starting at 0 */
|
|
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
|
|
|
|
/* This drives busses 10 to 0x1f */
|
|
bus-range = <0x10 0x1f>;
|
|
|
|
/* Legacy interrupts (note the weird polarity, the bridge seems
|
|
* to invert PCIe legacy interrupts).
|
|
* We are de-swizzling here because the numbers are actually for
|
|
* port of the root complex virtual P2P bridge. But I want
|
|
* to avoid putting a node for it in the tree, so the numbers
|
|
* below are basically de-swizzled numbers.
|
|
* The real slot is on idsel 0, so the swizzling is 1:1
|
|
*/
|
|
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
|
|
0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
|
|
0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
|
|
0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
|
|
};
|
|
|
|
PCIE1: pcie@d20000000 {
|
|
device_type = "pci";
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
|
|
primary;
|
|
port = <0x1>; /* port number */
|
|
reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */
|
|
0x0000000c 0x10001000 0x00001000>; /* Registers */
|
|
dcr-reg = <0x120 0x020>;
|
|
sdr-base = <0x340>;
|
|
|
|
/* Outbound ranges, one memory and one IO,
|
|
* later cannot be changed
|
|
*/
|
|
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
|
|
0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
|
|
|
|
/* Inbound 2GB range starting at 0 */
|
|
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
|
|
|
|
/* This drives busses 10 to 0x1f */
|
|
bus-range = <0x20 0x2f>;
|
|
|
|
/* Legacy interrupts (note the weird polarity, the bridge seems
|
|
* to invert PCIe legacy interrupts).
|
|
* We are de-swizzling here because the numbers are actually for
|
|
* port of the root complex virtual P2P bridge. But I want
|
|
* to avoid putting a node for it in the tree, so the numbers
|
|
* below are basically de-swizzled numbers.
|
|
* The real slot is on idsel 0, so the swizzling is 1:1
|
|
*/
|
|
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
|
|
0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
|
|
0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
|
|
0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
|
|
};
|
|
|
|
PCIE2: pcie@d40000000 {
|
|
device_type = "pci";
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
|
|
primary;
|
|
port = <0x2>; /* port number */
|
|
reg = <0x0000000d 0x40000000 0x20000000 /* Config space access */
|
|
0x0000000c 0x10002000 0x00001000>; /* Registers */
|
|
dcr-reg = <0x140 0x020>;
|
|
sdr-base = <0x370>;
|
|
|
|
/* Outbound ranges, one memory and one IO,
|
|
* later cannot be changed
|
|
*/
|
|
ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
|
|
0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
|
|
|
|
/* Inbound 2GB range starting at 0 */
|
|
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
|
|
|
|
/* This drives busses 10 to 0x1f */
|
|
bus-range = <0x30 0x3f>;
|
|
|
|
/* Legacy interrupts (note the weird polarity, the bridge seems
|
|
* to invert PCIe legacy interrupts).
|
|
* We are de-swizzling here because the numbers are actually for
|
|
* port of the root complex virtual P2P bridge. But I want
|
|
* to avoid putting a node for it in the tree, so the numbers
|
|
* below are basically de-swizzled numbers.
|
|
* The real slot is on idsel 0, so the swizzling is 1:1
|
|
*/
|
|
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
|
|
0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
|
|
0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
|
|
0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
|
|
};
|
|
|
|
};
|
|
|
|
|
|
chosen {
|
|
stdout-path = "/plb/opb/serial@ef600200";
|
|
};
|
|
|
|
};
|