linux/linux-5.18.11/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts

268 lines
4.9 KiB
Plaintext

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2020 Microsemi Corporation
*/
/dts-v1/;
#include "jaguar2_common.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Jaguar2 Cu8-Sfp16 PCB110 Reference Board";
compatible = "mscc,jr2-pcb110", "mscc,jr2";
aliases {
i2c0 = &i2c0;
i2c108 = &i2c108;
i2c109 = &i2c109;
i2c110 = &i2c110;
i2c111 = &i2c111;
i2c112 = &i2c112;
i2c113 = &i2c113;
i2c114 = &i2c114;
i2c115 = &i2c115;
i2c116 = &i2c116;
i2c117 = &i2c117;
i2c118 = &i2c118;
i2c119 = &i2c119;
i2c120 = &i2c120;
i2c121 = &i2c121;
i2c122 = &i2c122;
i2c123 = &i2c123;
i2c124 = &i2c124;
i2c125 = &i2c125;
i2c126 = &i2c126;
i2c127 = &i2c127;
i2c128 = &i2c128;
i2c129 = &i2c129;
i2c130 = &i2c130;
i2c131 = &i2c131;
i2c149 = &i2c149;
i2c150 = &i2c150;
i2c151 = &i2c151;
i2c152 = &i2c152;
};
i2c0_imux: i2c0-imux {
compatible = "i2c-mux-pinctrl";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&i2c0>;
pinctrl-names =
"i2c149", "i2c150", "i2c151", "i2c152", "idle";
pinctrl-0 = <&i2cmux_0>;
pinctrl-1 = <&i2cmux_1>;
pinctrl-2 = <&i2cmux_2>;
pinctrl-3 = <&i2cmux_3>;
pinctrl-4 = <&i2cmux_pins_i>;
i2c149: i2c@0 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c150: i2c@1 {
reg = <0x1>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c151: i2c@2 {
reg = <0x2>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c152: i2c@3 {
reg = <0x3>;
#address-cells = <1>;
#size-cells = <0>;
};
};
i2c0_emux: i2c0-emux {
compatible = "i2c-mux-gpio";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&i2c0>;
mux-gpios = <&gpio 51 GPIO_ACTIVE_HIGH
&gpio 52 GPIO_ACTIVE_HIGH
&gpio 53 GPIO_ACTIVE_HIGH
&gpio 58 GPIO_ACTIVE_HIGH
&gpio 59 GPIO_ACTIVE_HIGH>;
idle-state = <0x0>;
i2c108: i2c@10 {
reg = <0x10>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c109: i2c@11 {
reg = <0x11>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c110: i2c@12 {
reg = <0x12>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c111: i2c@13 {
reg = <0x13>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c112: i2c@14 {
reg = <0x14>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c113: i2c@15 {
reg = <0x15>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c114: i2c@16 {
reg = <0x16>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c115: i2c@17 {
reg = <0x17>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c116: i2c@8 {
reg = <0x8>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c117: i2c@9 {
reg = <0x9>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c118: i2c@a {
reg = <0xa>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c119: i2c@b {
reg = <0xb>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c120: i2c@c {
reg = <0xc>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c121: i2c@d {
reg = <0xd>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c122: i2c@e {
reg = <0xe>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c123: i2c@f {
reg = <0xf>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
&gpio {
synce_pins: synce-pins {
// GPIO 16 == SI_nCS1
pins = "GPIO_16";
function = "si";
};
synce_builtin_pins: synce-builtin-pins {
// GPIO 49 == SI_nCS13
pins = "GPIO_49";
function = "si";
};
i2cmux_pins_i: i2cmux-pins-i {
pins = "GPIO_17", "GPIO_18", "GPIO_20", "GPIO_21";
function = "twi_scl_m";
output-low;
};
i2cmux_0: i2cmux-0 {
pins = "GPIO_17";
function = "twi_scl_m";
output-high;
};
i2cmux_1: i2cmux-1 {
pins = "GPIO_18";
function = "twi_scl_m";
output-high;
};
i2cmux_2: i2cmux-2 {
pins = "GPIO_20";
function = "twi_scl_m";
output-high;
};
i2cmux_3: i2cmux-3 {
pins = "GPIO_21";
function = "twi_scl_m";
output-high;
};
};
&i2c0 {
pca9545@70 {
compatible = "nxp,pca9545";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
i2c124: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
i2c125: i2c@1 {
/* FMC B */
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
i2c126: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
i2c127: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
};
pca9545@71 {
compatible = "nxp,pca9545";
reg = <0x71>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
i2c128: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
i2c129: i2c@1 {
/* FMC B */
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
i2c130: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
i2c131: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
};
};