// SPDX-License-Identifier: GPL-2.0 /* * Watchdog driver for the K3 RTI module * * (c) Copyright 2019-2020 Texas Instruments Inc. * All rights reserved. */ #include #include #include #include #include #include #include #include #include #include #include #include #define DEFAULT_HEARTBEAT 60 /* Max heartbeat is calculated at 32kHz source clock */ #define MAX_HEARTBEAT 1000 /* Timer register set definition */ #define RTIDWDCTRL 0x90 #define RTIDWDPRLD 0x94 #define RTIWDSTATUS 0x98 #define RTIWDKEY 0x9c #define RTIDWDCNTR 0xa0 #define RTIWWDRXCTRL 0xa4 #define RTIWWDSIZECTRL 0xa8 #define RTIWWDRX_NMI 0xa #define RTIWWDSIZE_50P 0x50 #define RTIWWDSIZE_25P 0x500 #define RTIWWDSIZE_12P5 0x5000 #define RTIWWDSIZE_6P25 0x50000 #define RTIWWDSIZE_3P125 0x500000 #define WDENABLE_KEY 0xa98559da #define WDKEY_SEQ0 0xe51a #define WDKEY_SEQ1 0xa35c #define WDT_PRELOAD_SHIFT 13 #define WDT_PRELOAD_MAX 0xfff #define DWDST BIT(1) static int heartbeat = DEFAULT_HEARTBEAT; /* * struct to hold data for each WDT device * @base - base io address of WD device * @freq - source clock frequency of WDT * @wdd - hold watchdog device as is in WDT core */ struct rti_wdt_device { void __iomem *base; unsigned long freq; struct watchdog_device wdd; }; static int rti_wdt_start(struct watchdog_device *wdd) { u32 timer_margin; struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd); /* set timeout period */ timer_margin = (u64)wdd->timeout * wdt->freq; timer_margin >>= WDT_PRELOAD_SHIFT; if (timer_margin > WDT_PRELOAD_MAX) timer_margin = WDT_PRELOAD_MAX; writel_relaxed(timer_margin, wdt->base + RTIDWDPRLD); /* * RTI only supports a windowed mode, where the watchdog can only * be petted during the open window; not too early or not too late. * The HW configuration options only allow for the open window size * to be 50% or less than that; we obviouly want to configure the open * window as large as possible so we select the 50% option. */ wdd->min_hw_heartbeat_ms = 500 * wdd->timeout; /* Generate NMI when wdt expires */ writel_relaxed(RTIWWDRX_NMI, wdt->base + RTIWWDRXCTRL); /* Open window size 50%; this is the largest window size available */ writel_relaxed(RTIWWDSIZE_50P, wdt->base + RTIWWDSIZECTRL); readl_relaxed(wdt->base + RTIWWDSIZECTRL); /* enable watchdog */ writel_relaxed(WDENABLE_KEY, wdt->base + RTIDWDCTRL); return 0; } static int rti_wdt_ping(struct watchdog_device *wdd) { struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd); /* put watchdog in service state */ writel_relaxed(WDKEY_SEQ0, wdt->base + RTIWDKEY); /* put watchdog in active state */ writel_relaxed(WDKEY_SEQ1, wdt->base + RTIWDKEY); return 0; } static int rti_wdt_setup_hw_hb(struct watchdog_device *wdd, u32 wsize) { /* * RTI only supports a windowed mode, where the watchdog can only * be petted during the open window; not too early or not too late. * The HW configuration options only allow for the open window size * to be 50% or less than that. */ switch (wsize) { case RTIWWDSIZE_50P: /* 50% open window => 50% min heartbeat */ wdd->min_hw_heartbeat_ms = 500 * heartbeat; break; case RTIWWDSIZE_25P: /* 25% open window => 75% min heartbeat */ wdd->min_hw_heartbeat_ms = 750 * heartbeat; break; case RTIWWDSIZE_12P5: /* 12.5% open window => 87.5% min heartbeat */ wdd->min_hw_heartbeat_ms = 875 * heartbeat; break; case RTIWWDSIZE_6P25: /* 6.5% open window => 93.5% min heartbeat */ wdd->min_hw_heartbeat_ms = 935 * heartbeat; break; case RTIWWDSIZE_3P125: /* 3.125% open window => 96.9% min heartbeat */ wdd->min_hw_heartbeat_ms = 969 * heartbeat; break; default: return -EINVAL; } return 0; } static unsigned int rti_wdt_get_timeleft_ms(struct watchdog_device *wdd) { u64 timer_counter; u32 val; struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd); /* if timeout has occurred then return 0 */ val = readl_relaxed(wdt->base + RTIWDSTATUS); if (val & DWDST) return 0; timer_counter = readl_relaxed(wdt->base + RTIDWDCNTR); timer_counter *= 1000; do_div(timer_counter, wdt->freq); return timer_counter; } static unsigned int rti_wdt_get_timeleft(struct watchdog_device *wdd) { return rti_wdt_get_timeleft_ms(wdd) / 1000; } static const struct watchdog_info rti_wdt_info = { .options = WDIOF_KEEPALIVEPING, .identity = "K3 RTI Watchdog", }; static const struct watchdog_ops rti_wdt_ops = { .owner = THIS_MODULE, .start = rti_wdt_start, .ping = rti_wdt_ping, .get_timeleft = rti_wdt_get_timeleft, }; static int rti_wdt_probe(struct platform_device *pdev) { int ret = 0; struct device *dev = &pdev->dev; struct watchdog_device *wdd; struct rti_wdt_device *wdt; struct clk *clk; u32 last_ping = 0; wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL); if (!wdt) return -ENOMEM; clk = clk_get(dev, NULL); if (IS_ERR(clk)) return dev_err_probe(dev, PTR_ERR(clk), "failed to get clock\n"); wdt->freq = clk_get_rate(clk); clk_put(clk); if (!wdt->freq) { dev_err(dev, "Failed to get fck rate.\n"); return -EINVAL; } /* * If watchdog is running at 32k clock, it is not accurate. * Adjust frequency down in this case so that we don't pet * the watchdog too often. */ if (wdt->freq < 32768) wdt->freq = wdt->freq * 9 / 10; pm_runtime_enable(dev); ret = pm_runtime_get_sync(dev); if (ret < 0) { pm_runtime_put_noidle(dev); pm_runtime_disable(&pdev->dev); return dev_err_probe(dev, ret, "runtime pm failed\n"); } platform_set_drvdata(pdev, wdt); wdd = &wdt->wdd; wdd->info = &rti_wdt_info; wdd->ops = &rti_wdt_ops; wdd->min_timeout = 1; wdd->max_hw_heartbeat_ms = (WDT_PRELOAD_MAX << WDT_PRELOAD_SHIFT) / wdt->freq * 1000; wdd->parent = dev; watchdog_set_drvdata(wdd, wdt); watchdog_set_nowayout(wdd, 1); watchdog_set_restart_priority(wdd, 128); wdt->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(wdt->base)) { ret = PTR_ERR(wdt->base); goto err_iomap; } if (readl(wdt->base + RTIDWDCTRL) == WDENABLE_KEY) { u32 time_left_ms; u64 heartbeat_ms; u32 wsize; set_bit(WDOG_HW_RUNNING, &wdd->status); time_left_ms = rti_wdt_get_timeleft_ms(wdd); heartbeat_ms = readl(wdt->base + RTIDWDPRLD); heartbeat_ms <<= WDT_PRELOAD_SHIFT; heartbeat_ms *= 1000; do_div(heartbeat_ms, wdt->freq); if (heartbeat_ms != heartbeat * 1000) dev_warn(dev, "watchdog already running, ignoring heartbeat config!\n"); heartbeat = heartbeat_ms; heartbeat /= 1000; wsize = readl(wdt->base + RTIWWDSIZECTRL); ret = rti_wdt_setup_hw_hb(wdd, wsize); if (ret) { dev_err(dev, "bad window size.\n"); goto err_iomap; } last_ping = heartbeat_ms - time_left_ms; if (time_left_ms > heartbeat_ms) { dev_warn(dev, "time_left > heartbeat? Assuming last ping just before now.\n"); last_ping = 0; } } watchdog_init_timeout(wdd, heartbeat, dev); ret = watchdog_register_device(wdd); if (ret) { dev_err(dev, "cannot register watchdog device\n"); goto err_iomap; } if (last_ping) watchdog_set_last_hw_keepalive(wdd, last_ping); return 0; err_iomap: pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); return ret; } static int rti_wdt_remove(struct platform_device *pdev) { struct rti_wdt_device *wdt = platform_get_drvdata(pdev); watchdog_unregister_device(&wdt->wdd); pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); return 0; } static const struct of_device_id rti_wdt_of_match[] = { { .compatible = "ti,j7-rti-wdt", }, {}, }; MODULE_DEVICE_TABLE(of, rti_wdt_of_match); static struct platform_driver rti_wdt_driver = { .driver = { .name = "rti-wdt", .of_match_table = rti_wdt_of_match, }, .probe = rti_wdt_probe, .remove = rti_wdt_remove, }; module_platform_driver(rti_wdt_driver); MODULE_AUTHOR("Tero Kristo "); MODULE_DESCRIPTION("K3 RTI Watchdog Driver"); module_param(heartbeat, int, 0); MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat period in seconds from 1 to " __MODULE_STRING(MAX_HEARTBEAT) ", default " __MODULE_STRING(DEFAULT_HEARTBEAT)); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:rti-wdt");