linux/linux-5.18.11/sound/usb/usbaudio.h

194 lines
6.0 KiB
C
Raw Normal View History

2024-03-22 18:12:32 +00:00
/* SPDX-License-Identifier: GPL-2.0-or-later */
#ifndef __USBAUDIO_H
#define __USBAUDIO_H
/*
* (Tentative) USB Audio Driver for ALSA
*
* Copyright (c) 2002 by Takashi Iwai <tiwai@suse.de>
*/
/* handling of USB vendor/product ID pairs as 32-bit numbers */
#define USB_ID(vendor, product) (((unsigned int)(vendor) << 16) | (product))
#define USB_ID_VENDOR(id) ((id) >> 16)
#define USB_ID_PRODUCT(id) ((u16)(id))
/*
*
*/
struct media_device;
struct media_intf_devnode;
#define MAX_CARD_INTERFACES 16
struct snd_usb_audio {
int index;
struct usb_device *dev;
struct snd_card *card;
struct usb_interface *intf[MAX_CARD_INTERFACES];
u32 usb_id;
uint16_t quirk_type;
struct mutex mutex;
unsigned int system_suspend;
atomic_t active;
atomic_t shutdown;
atomic_t usage_count;
wait_queue_head_t shutdown_wait;
unsigned int quirk_flags;
unsigned int need_delayed_register:1; /* warn for delayed registration */
int num_interfaces;
int num_suspended_intf;
int sample_rate_read_error;
int badd_profile; /* UAC3 BADD profile */
struct list_head pcm_list; /* list of pcm streams */
struct list_head ep_list; /* list of audio-related endpoints */
struct list_head iface_ref_list; /* list of interface refcounts */
int pcm_devs;
struct list_head midi_list; /* list of midi interfaces */
struct list_head mixer_list; /* list of mixer interfaces */
int setup; /* from the 'device_setup' module param */
bool generic_implicit_fb; /* from the 'implicit_fb' module param */
bool autoclock; /* from the 'autoclock' module param */
bool lowlatency; /* from the 'lowlatency' module param */
struct usb_host_interface *ctrl_intf; /* the audio control interface */
struct media_device *media_dev;
struct media_intf_devnode *ctl_intf_media_devnode;
};
#define USB_AUDIO_IFACE_UNUSED ((void *)-1L)
#define usb_audio_err(chip, fmt, args...) \
dev_err(&(chip)->dev->dev, fmt, ##args)
#define usb_audio_warn(chip, fmt, args...) \
dev_warn(&(chip)->dev->dev, fmt, ##args)
#define usb_audio_info(chip, fmt, args...) \
dev_info(&(chip)->dev->dev, fmt, ##args)
#define usb_audio_dbg(chip, fmt, args...) \
dev_dbg(&(chip)->dev->dev, fmt, ##args)
/*
* Information about devices with broken descriptors
*/
/* special values for .ifnum */
#define QUIRK_NODEV_INTERFACE -3 /* return -ENODEV */
#define QUIRK_NO_INTERFACE -2
#define QUIRK_ANY_INTERFACE -1
enum quirk_type {
QUIRK_IGNORE_INTERFACE,
QUIRK_COMPOSITE,
QUIRK_AUTODETECT,
QUIRK_MIDI_STANDARD_INTERFACE,
QUIRK_MIDI_FIXED_ENDPOINT,
QUIRK_MIDI_YAMAHA,
QUIRK_MIDI_ROLAND,
QUIRK_MIDI_MIDIMAN,
QUIRK_MIDI_NOVATION,
QUIRK_MIDI_RAW_BYTES,
QUIRK_MIDI_EMAGIC,
QUIRK_MIDI_CME,
QUIRK_MIDI_AKAI,
QUIRK_MIDI_US122L,
QUIRK_MIDI_FTDI,
QUIRK_MIDI_CH345,
QUIRK_AUDIO_STANDARD_INTERFACE,
QUIRK_AUDIO_FIXED_ENDPOINT,
QUIRK_AUDIO_EDIROL_UAXX,
QUIRK_AUDIO_STANDARD_MIXER,
QUIRK_TYPE_COUNT
};
struct snd_usb_audio_quirk {
const char *vendor_name;
const char *product_name;
int16_t ifnum;
uint16_t type;
const void *data;
};
#define combine_word(s) ((*(s)) | ((unsigned int)(s)[1] << 8))
#define combine_triple(s) (combine_word(s) | ((unsigned int)(s)[2] << 16))
#define combine_quad(s) (combine_triple(s) | ((unsigned int)(s)[3] << 24))
int snd_usb_lock_shutdown(struct snd_usb_audio *chip);
void snd_usb_unlock_shutdown(struct snd_usb_audio *chip);
extern bool snd_usb_use_vmalloc;
extern bool snd_usb_skip_validation;
/*
* Driver behavior quirk flags, stored in chip->quirk_flags
*
* QUIRK_FLAG_GET_SAMPLE_RATE:
* Skip reading sample rate for devices, as some devices behave inconsistently
* or return error
* QUIRK_FLAG_SHARE_MEDIA_DEVICE:
* Create Media Controller API entries
* QUIRK_FLAG_ALIGN_TRANSFER:
* Allow alignment on audio sub-slot (channel samples) rather than on audio
* slots (audio frames)
* QUIRK_TX_LENGTH:
* Add length specifier to transfers
* QUIRK_FLAG_PLAYBACK_FIRST:
* Start playback stream at first even in implement feedback mode
* QUIRK_FLAG_SKIP_CLOCK_SELECTOR:
* Skip clock selector setup; the device may reset to invalid state
* QUIRK_FLAG_IGNORE_CLOCK_SOURCE:
* Ignore errors from clock source search; i.e. hardcoded clock
* QUIRK_FLAG_ITF_USB_DSD_DAC:
* Indicates the device is for ITF-USB DSD based DACs that need a vendor cmd
* to switch between PCM and native DSD mode
* QUIRK_FLAG_CTL_MSG_DELAY:
* Add a delay of 20ms at each control message handling
* QUIRK_FLAG_CTL_MSG_DELAY_1M:
* Add a delay of 1-2ms at each control message handling
* QUIRK_FLAG_CTL_MSG_DELAY_5M:
* Add a delay of 5-6ms at each control message handling
* QUIRK_FLAG_IFACE_DELAY:
* Add a delay of 50ms at each interface setup
* QUIRK_FLAG_VALIDATE_RATES:
* Perform sample rate validations at probe
* QUIRK_FLAG_DISABLE_AUTOSUSPEND:
* Disable runtime PM autosuspend
* QUIRK_FLAG_IGNORE_CTL_ERROR:
* Ignore errors for mixer access
* QUIRK_FLAG_DSD_RAW:
* Support generic DSD raw U32_BE format
* QUIRK_FLAG_SET_IFACE_FIRST:
* Set up the interface at first like UAC1
* QUIRK_FLAG_GENERIC_IMPLICIT_FB
* Apply the generic implicit feedback sync mode (same as implicit_fb=1 option)
* QUIRK_FLAG_SKIP_IMPLICIT_FB
* Don't apply implicit feedback sync mode
*/
#define QUIRK_FLAG_GET_SAMPLE_RATE (1U << 0)
#define QUIRK_FLAG_SHARE_MEDIA_DEVICE (1U << 1)
#define QUIRK_FLAG_ALIGN_TRANSFER (1U << 2)
#define QUIRK_FLAG_TX_LENGTH (1U << 3)
#define QUIRK_FLAG_PLAYBACK_FIRST (1U << 4)
#define QUIRK_FLAG_SKIP_CLOCK_SELECTOR (1U << 5)
#define QUIRK_FLAG_IGNORE_CLOCK_SOURCE (1U << 6)
#define QUIRK_FLAG_ITF_USB_DSD_DAC (1U << 7)
#define QUIRK_FLAG_CTL_MSG_DELAY (1U << 8)
#define QUIRK_FLAG_CTL_MSG_DELAY_1M (1U << 9)
#define QUIRK_FLAG_CTL_MSG_DELAY_5M (1U << 10)
#define QUIRK_FLAG_IFACE_DELAY (1U << 11)
#define QUIRK_FLAG_VALIDATE_RATES (1U << 12)
#define QUIRK_FLAG_DISABLE_AUTOSUSPEND (1U << 13)
#define QUIRK_FLAG_IGNORE_CTL_ERROR (1U << 14)
#define QUIRK_FLAG_DSD_RAW (1U << 15)
#define QUIRK_FLAG_SET_IFACE_FIRST (1U << 16)
#define QUIRK_FLAG_GENERIC_IMPLICIT_FB (1U << 17)
#define QUIRK_FLAG_SKIP_IMPLICIT_FB (1U << 18)
#endif /* __USBAUDIO_H */