533 lines
13 KiB
C
533 lines
13 KiB
C
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
|
||
|
#include <linux/bits.h>
|
||
|
#include <linux/bitfield.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/gpio/consumer.h>
|
||
|
#include <linux/i2c.h>
|
||
|
#include <linux/kernel.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/regmap.h>
|
||
|
#include <linux/regulator/consumer.h>
|
||
|
#include <sound/pcm.h>
|
||
|
#include <sound/pcm_params.h>
|
||
|
#include <sound/soc.h>
|
||
|
#include <sound/tlv.h>
|
||
|
|
||
|
#define RT9120_REG_DEVID 0x00
|
||
|
#define RT9120_REG_I2SFMT 0x02
|
||
|
#define RT9120_REG_I2SWL 0x03
|
||
|
#define RT9120_REG_SDIOSEL 0x04
|
||
|
#define RT9120_REG_SYSCTL 0x05
|
||
|
#define RT9120_REG_SPKGAIN 0x07
|
||
|
#define RT9120_REG_VOLRAMP 0x0A
|
||
|
#define RT9120_REG_ERRRPT 0x10
|
||
|
#define RT9120_REG_MSVOL 0x20
|
||
|
#define RT9120_REG_SWRESET 0x40
|
||
|
#define RT9120_REG_INTERCFG 0x63
|
||
|
#define RT9120_REG_INTERNAL0 0x65
|
||
|
#define RT9120_REG_INTERNAL1 0x69
|
||
|
#define RT9120_REG_UVPOPT 0x6C
|
||
|
#define RT9120_REG_DIGCFG 0xF8
|
||
|
|
||
|
#define RT9120_VID_MASK GENMASK(15, 8)
|
||
|
#define RT9120_SWRST_MASK BIT(7)
|
||
|
#define RT9120_MUTE_MASK GENMASK(5, 4)
|
||
|
#define RT9120_I2SFMT_MASK GENMASK(4, 2)
|
||
|
#define RT9120_I2SFMT_SHIFT 2
|
||
|
#define RT9120_CFG_FMT_I2S 0
|
||
|
#define RT9120_CFG_FMT_LEFTJ 1
|
||
|
#define RT9120_CFG_FMT_RIGHTJ 2
|
||
|
#define RT9120_CFG_FMT_DSPA 3
|
||
|
#define RT9120_CFG_FMT_DSPB 7
|
||
|
#define RT9120_AUDBIT_MASK GENMASK(1, 0)
|
||
|
#define RT9120_CFG_AUDBIT_16 0
|
||
|
#define RT9120_CFG_AUDBIT_20 1
|
||
|
#define RT9120_CFG_AUDBIT_24 2
|
||
|
#define RT9120_AUDWL_MASK GENMASK(5, 0)
|
||
|
#define RT9120_CFG_WORDLEN_16 16
|
||
|
#define RT9120_CFG_WORDLEN_24 24
|
||
|
#define RT9120_CFG_WORDLEN_32 32
|
||
|
#define RT9120_DVDD_UVSEL_MASK GENMASK(5, 4)
|
||
|
#define RT9120_AUTOSYNC_MASK BIT(6)
|
||
|
|
||
|
#define RT9120_VENDOR_ID 0x42
|
||
|
#define RT9120S_VENDOR_ID 0x43
|
||
|
#define RT9120_RESET_WAITMS 20
|
||
|
#define RT9120_CHIPON_WAITMS 20
|
||
|
#define RT9120_AMPON_WAITMS 50
|
||
|
#define RT9120_AMPOFF_WAITMS 100
|
||
|
#define RT9120_LVAPP_THRESUV 2000000
|
||
|
|
||
|
/* 8000 to 192000 supported , only 176400 not support */
|
||
|
#define RT9120_RATES_MASK (SNDRV_PCM_RATE_8000_192000 &\
|
||
|
~SNDRV_PCM_RATE_176400)
|
||
|
#define RT9120_FMTS_MASK (SNDRV_PCM_FMTBIT_S16_LE |\
|
||
|
SNDRV_PCM_FMTBIT_S24_LE |\
|
||
|
SNDRV_PCM_FMTBIT_S32_LE)
|
||
|
|
||
|
enum {
|
||
|
CHIP_IDX_RT9120 = 0,
|
||
|
CHIP_IDX_RT9120S,
|
||
|
CHIP_IDX_MAX
|
||
|
};
|
||
|
|
||
|
struct rt9120_data {
|
||
|
struct device *dev;
|
||
|
struct regmap *regmap;
|
||
|
int chip_idx;
|
||
|
};
|
||
|
|
||
|
/* 11bit [min,max,step] = [-103.9375dB, 24dB, 0.0625dB] */
|
||
|
static const DECLARE_TLV_DB_SCALE(digital_tlv, -1039375, 625, 1);
|
||
|
|
||
|
/* {6, 8, 10, 12, 13, 14, 15, 16}dB */
|
||
|
static const DECLARE_TLV_DB_RANGE(classd_tlv,
|
||
|
0, 3, TLV_DB_SCALE_ITEM(600, 200, 0),
|
||
|
4, 7, TLV_DB_SCALE_ITEM(1300, 100, 0)
|
||
|
);
|
||
|
|
||
|
static const char * const sdo_select_text[] = {
|
||
|
"None", "INTF", "Final", "RMS Detect"
|
||
|
};
|
||
|
|
||
|
static const struct soc_enum sdo_select_enum =
|
||
|
SOC_ENUM_SINGLE(RT9120_REG_SDIOSEL, 4, ARRAY_SIZE(sdo_select_text),
|
||
|
sdo_select_text);
|
||
|
|
||
|
static const struct snd_kcontrol_new rt9120_snd_controls[] = {
|
||
|
SOC_SINGLE_TLV("MS Volume", RT9120_REG_MSVOL, 0, 2047, 1, digital_tlv),
|
||
|
SOC_SINGLE_TLV("SPK Gain Volume", RT9120_REG_SPKGAIN, 0, 7, 0, classd_tlv),
|
||
|
SOC_SINGLE("PBTL Switch", RT9120_REG_SYSCTL, 3, 1, 0),
|
||
|
SOC_ENUM("SDO Select", sdo_select_enum),
|
||
|
};
|
||
|
|
||
|
static int internal_power_event(struct snd_soc_dapm_widget *w,
|
||
|
struct snd_kcontrol *kcontrol, int event)
|
||
|
{
|
||
|
struct snd_soc_component *comp = snd_soc_dapm_to_component(w->dapm);
|
||
|
|
||
|
switch (event) {
|
||
|
case SND_SOC_DAPM_PRE_PMU:
|
||
|
snd_soc_component_write(comp, RT9120_REG_ERRRPT, 0);
|
||
|
break;
|
||
|
case SND_SOC_DAPM_POST_PMU:
|
||
|
msleep(RT9120_AMPON_WAITMS);
|
||
|
break;
|
||
|
case SND_SOC_DAPM_POST_PMD:
|
||
|
msleep(RT9120_AMPOFF_WAITMS);
|
||
|
break;
|
||
|
default:
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static const struct snd_soc_dapm_widget rt9120_dapm_widgets[] = {
|
||
|
SND_SOC_DAPM_MIXER("DMIX", SND_SOC_NOPM, 0, 0, NULL, 0),
|
||
|
SND_SOC_DAPM_DAC("LDAC", NULL, SND_SOC_NOPM, 0, 0),
|
||
|
SND_SOC_DAPM_DAC("RDAC", NULL, SND_SOC_NOPM, 0, 0),
|
||
|
SND_SOC_DAPM_SUPPLY("PWND", RT9120_REG_SYSCTL, 6, 1,
|
||
|
internal_power_event, SND_SOC_DAPM_PRE_PMU |
|
||
|
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
|
||
|
SND_SOC_DAPM_PGA("SPKL PA", SND_SOC_NOPM, 0, 0, NULL, 0),
|
||
|
SND_SOC_DAPM_PGA("SPKR PA", SND_SOC_NOPM, 0, 0, NULL, 0),
|
||
|
SND_SOC_DAPM_OUTPUT("SPKL"),
|
||
|
SND_SOC_DAPM_OUTPUT("SPKR"),
|
||
|
};
|
||
|
|
||
|
static const struct snd_soc_dapm_route rt9120_dapm_routes[] = {
|
||
|
{ "DMIX", NULL, "AIF Playback" },
|
||
|
/* SPKL */
|
||
|
{ "LDAC", NULL, "PWND" },
|
||
|
{ "LDAC", NULL, "DMIX" },
|
||
|
{ "SPKL PA", NULL, "LDAC" },
|
||
|
{ "SPKL", NULL, "SPKL PA" },
|
||
|
/* SPKR */
|
||
|
{ "RDAC", NULL, "PWND" },
|
||
|
{ "RDAC", NULL, "DMIX" },
|
||
|
{ "SPKR PA", NULL, "RDAC" },
|
||
|
{ "SPKR", NULL, "SPKR PA" },
|
||
|
/* Cap */
|
||
|
{ "AIF Capture", NULL, "LDAC" },
|
||
|
{ "AIF Capture", NULL, "RDAC" },
|
||
|
};
|
||
|
|
||
|
static int rt9120_codec_probe(struct snd_soc_component *comp)
|
||
|
{
|
||
|
struct rt9120_data *data = snd_soc_component_get_drvdata(comp);
|
||
|
|
||
|
snd_soc_component_init_regmap(comp, data->regmap);
|
||
|
|
||
|
/* Internal setting */
|
||
|
if (data->chip_idx == CHIP_IDX_RT9120S) {
|
||
|
snd_soc_component_write(comp, RT9120_REG_INTERCFG, 0xde);
|
||
|
snd_soc_component_write(comp, RT9120_REG_INTERNAL0, 0x66);
|
||
|
} else
|
||
|
snd_soc_component_write(comp, RT9120_REG_INTERNAL0, 0x04);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static const struct snd_soc_component_driver rt9120_component_driver = {
|
||
|
.probe = rt9120_codec_probe,
|
||
|
.controls = rt9120_snd_controls,
|
||
|
.num_controls = ARRAY_SIZE(rt9120_snd_controls),
|
||
|
.dapm_widgets = rt9120_dapm_widgets,
|
||
|
.num_dapm_widgets = ARRAY_SIZE(rt9120_dapm_widgets),
|
||
|
.dapm_routes = rt9120_dapm_routes,
|
||
|
.num_dapm_routes = ARRAY_SIZE(rt9120_dapm_routes),
|
||
|
};
|
||
|
|
||
|
static int rt9120_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
|
||
|
{
|
||
|
struct snd_soc_component *comp = dai->component;
|
||
|
unsigned int format;
|
||
|
|
||
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
||
|
case SND_SOC_DAIFMT_I2S:
|
||
|
format = RT9120_CFG_FMT_I2S;
|
||
|
break;
|
||
|
case SND_SOC_DAIFMT_LEFT_J:
|
||
|
format = RT9120_CFG_FMT_LEFTJ;
|
||
|
break;
|
||
|
case SND_SOC_DAIFMT_RIGHT_J:
|
||
|
format = RT9120_CFG_FMT_RIGHTJ;
|
||
|
break;
|
||
|
case SND_SOC_DAIFMT_DSP_A:
|
||
|
format = RT9120_CFG_FMT_DSPA;
|
||
|
break;
|
||
|
case SND_SOC_DAIFMT_DSP_B:
|
||
|
format = RT9120_CFG_FMT_DSPB;
|
||
|
break;
|
||
|
default:
|
||
|
dev_err(dai->dev, "Unknown dai format\n");
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
snd_soc_component_update_bits(comp, RT9120_REG_I2SFMT,
|
||
|
RT9120_I2SFMT_MASK,
|
||
|
format << RT9120_I2SFMT_SHIFT);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int rt9120_hw_params(struct snd_pcm_substream *substream,
|
||
|
struct snd_pcm_hw_params *param,
|
||
|
struct snd_soc_dai *dai)
|
||
|
{
|
||
|
struct snd_soc_component *comp = dai->component;
|
||
|
unsigned int param_width, param_slot_width, auto_sync;
|
||
|
int width, fs;
|
||
|
|
||
|
switch (width = params_width(param)) {
|
||
|
case 16:
|
||
|
param_width = RT9120_CFG_AUDBIT_16;
|
||
|
break;
|
||
|
case 20:
|
||
|
param_width = RT9120_CFG_AUDBIT_20;
|
||
|
break;
|
||
|
case 24:
|
||
|
case 32:
|
||
|
param_width = RT9120_CFG_AUDBIT_24;
|
||
|
break;
|
||
|
default:
|
||
|
dev_err(dai->dev, "Unsupported data width [%d]\n", width);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
snd_soc_component_update_bits(comp, RT9120_REG_I2SFMT,
|
||
|
RT9120_AUDBIT_MASK, param_width);
|
||
|
|
||
|
switch (width = params_physical_width(param)) {
|
||
|
case 16:
|
||
|
param_slot_width = RT9120_CFG_WORDLEN_16;
|
||
|
break;
|
||
|
case 24:
|
||
|
param_slot_width = RT9120_CFG_WORDLEN_24;
|
||
|
break;
|
||
|
case 32:
|
||
|
param_slot_width = RT9120_CFG_WORDLEN_32;
|
||
|
break;
|
||
|
default:
|
||
|
dev_err(dai->dev, "Unsupported slot width [%d]\n", width);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
snd_soc_component_update_bits(comp, RT9120_REG_I2SWL,
|
||
|
RT9120_AUDWL_MASK, param_slot_width);
|
||
|
|
||
|
fs = width * params_channels(param);
|
||
|
/* If fs is divided by 48, disable auto sync */
|
||
|
if (fs % 48 == 0)
|
||
|
auto_sync = 0;
|
||
|
else
|
||
|
auto_sync = RT9120_AUTOSYNC_MASK;
|
||
|
|
||
|
snd_soc_component_update_bits(comp, RT9120_REG_DIGCFG,
|
||
|
RT9120_AUTOSYNC_MASK, auto_sync);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static const struct snd_soc_dai_ops rt9120_dai_ops = {
|
||
|
.set_fmt = rt9120_set_fmt,
|
||
|
.hw_params = rt9120_hw_params,
|
||
|
};
|
||
|
|
||
|
static struct snd_soc_dai_driver rt9120_dai = {
|
||
|
.name = "rt9120_aif",
|
||
|
.playback = {
|
||
|
.stream_name = "AIF Playback",
|
||
|
.rates = RT9120_RATES_MASK,
|
||
|
.formats = RT9120_FMTS_MASK,
|
||
|
.rate_max = 192000,
|
||
|
.rate_min = 8000,
|
||
|
.channels_min = 1,
|
||
|
.channels_max = 2,
|
||
|
},
|
||
|
.capture = {
|
||
|
.stream_name = "AIF Capture",
|
||
|
.rates = RT9120_RATES_MASK,
|
||
|
.formats = RT9120_FMTS_MASK,
|
||
|
.rate_max = 192000,
|
||
|
.rate_min = 8000,
|
||
|
.channels_min = 1,
|
||
|
.channels_max = 2,
|
||
|
},
|
||
|
.ops = &rt9120_dai_ops,
|
||
|
.symmetric_rate = 1,
|
||
|
.symmetric_sample_bits = 1,
|
||
|
};
|
||
|
|
||
|
static const struct regmap_range rt9120_rd_yes_ranges[] = {
|
||
|
regmap_reg_range(0x00, 0x0C),
|
||
|
regmap_reg_range(0x10, 0x15),
|
||
|
regmap_reg_range(0x20, 0x27),
|
||
|
regmap_reg_range(0x30, 0x38),
|
||
|
regmap_reg_range(0x3A, 0x40),
|
||
|
regmap_reg_range(0x63, 0x63),
|
||
|
regmap_reg_range(0x65, 0x65),
|
||
|
regmap_reg_range(0x69, 0x69),
|
||
|
regmap_reg_range(0x6C, 0x6C),
|
||
|
regmap_reg_range(0xF8, 0xF8)
|
||
|
};
|
||
|
|
||
|
static const struct regmap_access_table rt9120_rd_table = {
|
||
|
.yes_ranges = rt9120_rd_yes_ranges,
|
||
|
.n_yes_ranges = ARRAY_SIZE(rt9120_rd_yes_ranges),
|
||
|
};
|
||
|
|
||
|
static const struct regmap_range rt9120_wr_yes_ranges[] = {
|
||
|
regmap_reg_range(0x00, 0x00),
|
||
|
regmap_reg_range(0x02, 0x0A),
|
||
|
regmap_reg_range(0x10, 0x15),
|
||
|
regmap_reg_range(0x20, 0x27),
|
||
|
regmap_reg_range(0x30, 0x38),
|
||
|
regmap_reg_range(0x3A, 0x3D),
|
||
|
regmap_reg_range(0x40, 0x40),
|
||
|
regmap_reg_range(0x63, 0x63),
|
||
|
regmap_reg_range(0x65, 0x65),
|
||
|
regmap_reg_range(0x69, 0x69),
|
||
|
regmap_reg_range(0x6C, 0x6C),
|
||
|
regmap_reg_range(0xF8, 0xF8)
|
||
|
};
|
||
|
|
||
|
static const struct regmap_access_table rt9120_wr_table = {
|
||
|
.yes_ranges = rt9120_wr_yes_ranges,
|
||
|
.n_yes_ranges = ARRAY_SIZE(rt9120_wr_yes_ranges),
|
||
|
};
|
||
|
|
||
|
static int rt9120_get_reg_size(unsigned int reg)
|
||
|
{
|
||
|
switch (reg) {
|
||
|
case 0x00:
|
||
|
case 0x20 ... 0x27:
|
||
|
return 2;
|
||
|
case 0x30 ... 0x3D:
|
||
|
return 3;
|
||
|
case 0x3E ... 0x3F:
|
||
|
return 4;
|
||
|
default:
|
||
|
return 1;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int rt9120_reg_read(void *context, unsigned int reg, unsigned int *val)
|
||
|
{
|
||
|
struct rt9120_data *data = context;
|
||
|
struct i2c_client *i2c = to_i2c_client(data->dev);
|
||
|
int size = rt9120_get_reg_size(reg);
|
||
|
u8 raw[4] = {0};
|
||
|
int ret;
|
||
|
|
||
|
ret = i2c_smbus_read_i2c_block_data(i2c, reg, size, raw);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
else if (ret != size)
|
||
|
return -EIO;
|
||
|
|
||
|
switch (size) {
|
||
|
case 4:
|
||
|
*val = be32_to_cpup((__be32 *)raw);
|
||
|
break;
|
||
|
case 3:
|
||
|
*val = raw[0] << 16 | raw[1] << 8 | raw[0];
|
||
|
break;
|
||
|
case 2:
|
||
|
*val = be16_to_cpup((__be16 *)raw);
|
||
|
break;
|
||
|
default:
|
||
|
*val = raw[0];
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int rt9120_reg_write(void *context, unsigned int reg, unsigned int val)
|
||
|
{
|
||
|
struct rt9120_data *data = context;
|
||
|
struct i2c_client *i2c = to_i2c_client(data->dev);
|
||
|
int size = rt9120_get_reg_size(reg);
|
||
|
__be32 be32_val;
|
||
|
u8 *rawp = (u8 *)&be32_val;
|
||
|
int offs = 4 - size;
|
||
|
|
||
|
be32_val = cpu_to_be32(val);
|
||
|
return i2c_smbus_write_i2c_block_data(i2c, reg, size, rawp + offs);
|
||
|
}
|
||
|
|
||
|
static const struct regmap_config rt9120_regmap_config = {
|
||
|
.reg_bits = 8,
|
||
|
.val_bits = 32,
|
||
|
.max_register = RT9120_REG_DIGCFG,
|
||
|
|
||
|
.reg_read = rt9120_reg_read,
|
||
|
.reg_write = rt9120_reg_write,
|
||
|
|
||
|
.wr_table = &rt9120_wr_table,
|
||
|
.rd_table = &rt9120_rd_table,
|
||
|
};
|
||
|
|
||
|
static int rt9120_check_vendor_info(struct rt9120_data *data)
|
||
|
{
|
||
|
unsigned int devid;
|
||
|
int ret;
|
||
|
|
||
|
ret = regmap_read(data->regmap, RT9120_REG_DEVID, &devid);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
devid = FIELD_GET(RT9120_VID_MASK, devid);
|
||
|
switch (devid) {
|
||
|
case RT9120_VENDOR_ID:
|
||
|
data->chip_idx = CHIP_IDX_RT9120;
|
||
|
break;
|
||
|
case RT9120S_VENDOR_ID:
|
||
|
data->chip_idx = CHIP_IDX_RT9120S;
|
||
|
break;
|
||
|
default:
|
||
|
dev_err(data->dev, "DEVID not correct [0x%0x]\n", devid);
|
||
|
return -ENODEV;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int rt9120_do_register_reset(struct rt9120_data *data)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
ret = regmap_write(data->regmap, RT9120_REG_SWRESET,
|
||
|
RT9120_SWRST_MASK);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
msleep(RT9120_RESET_WAITMS);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int rt9120_probe(struct i2c_client *i2c)
|
||
|
{
|
||
|
struct rt9120_data *data;
|
||
|
struct gpio_desc *pwdnn_gpio;
|
||
|
struct regulator *dvdd_supply;
|
||
|
int dvdd_supply_volt, ret;
|
||
|
|
||
|
data = devm_kzalloc(&i2c->dev, sizeof(*data), GFP_KERNEL);
|
||
|
if (!data)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
data->dev = &i2c->dev;
|
||
|
i2c_set_clientdata(i2c, data);
|
||
|
|
||
|
pwdnn_gpio = devm_gpiod_get_optional(&i2c->dev, "pwdnn",
|
||
|
GPIOD_OUT_HIGH);
|
||
|
if (IS_ERR(pwdnn_gpio)) {
|
||
|
dev_err(&i2c->dev, "Failed to initialize 'pwdnn' gpio\n");
|
||
|
return PTR_ERR(pwdnn_gpio);
|
||
|
} else if (pwdnn_gpio) {
|
||
|
dev_dbg(&i2c->dev, "'pwdnn' from low to high, wait chip on\n");
|
||
|
msleep(RT9120_CHIPON_WAITMS);
|
||
|
}
|
||
|
|
||
|
data->regmap = devm_regmap_init(&i2c->dev, NULL, data,
|
||
|
&rt9120_regmap_config);
|
||
|
if (IS_ERR(data->regmap)) {
|
||
|
ret = PTR_ERR(data->regmap);
|
||
|
dev_err(&i2c->dev, "Failed to init regmap [%d]\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
ret = rt9120_check_vendor_info(data);
|
||
|
if (ret) {
|
||
|
dev_err(&i2c->dev, "Failed to check vendor info\n");
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
ret = rt9120_do_register_reset(data);
|
||
|
if (ret) {
|
||
|
dev_err(&i2c->dev, "Failed to do register reset\n");
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
dvdd_supply = devm_regulator_get(&i2c->dev, "dvdd");
|
||
|
if (IS_ERR(dvdd_supply)) {
|
||
|
dev_err(&i2c->dev, "No dvdd regulator found\n");
|
||
|
return PTR_ERR(dvdd_supply);
|
||
|
}
|
||
|
|
||
|
dvdd_supply_volt = regulator_get_voltage(dvdd_supply);
|
||
|
if (dvdd_supply_volt <= RT9120_LVAPP_THRESUV) {
|
||
|
dev_dbg(&i2c->dev, "dvdd low voltage design\n");
|
||
|
ret = regmap_update_bits(data->regmap, RT9120_REG_UVPOPT,
|
||
|
RT9120_DVDD_UVSEL_MASK, 0);
|
||
|
if (ret) {
|
||
|
dev_err(&i2c->dev, "Failed to config dvdd uvsel\n");
|
||
|
return ret;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return devm_snd_soc_register_component(&i2c->dev,
|
||
|
&rt9120_component_driver,
|
||
|
&rt9120_dai, 1);
|
||
|
}
|
||
|
|
||
|
static const struct of_device_id __maybe_unused rt9120_device_table[] = {
|
||
|
{ .compatible = "richtek,rt9120", },
|
||
|
{ }
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(of, rt9120_device_table);
|
||
|
|
||
|
static struct i2c_driver rt9120_driver = {
|
||
|
.driver = {
|
||
|
.name = "rt9120",
|
||
|
.of_match_table = rt9120_device_table,
|
||
|
},
|
||
|
.probe_new = rt9120_probe,
|
||
|
};
|
||
|
module_i2c_driver(rt9120_driver);
|
||
|
|
||
|
MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
|
||
|
MODULE_DESCRIPTION("RT9120 Audio Amplifier Driver");
|
||
|
MODULE_LICENSE("GPL");
|