215 lines
7.5 KiB
C
215 lines
7.5 KiB
C
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
|
/* Driver for Pericom UART */
|
||
|
|
|
||
|
|
#include <linux/bits.h>
|
||
|
|
#include <linux/module.h>
|
||
|
|
#include <linux/overflow.h>
|
||
|
|
#include <linux/pci.h>
|
||
|
|
|
||
|
|
#include "8250.h"
|
||
|
|
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM_2SDB 0x1051
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_MPCIE_COM_2S 0x1053
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM422_4 0x105a
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM485_4 0x105b
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM_4SDB 0x105c
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_MPCIE_COM_4S 0x105e
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM422_8 0x106a
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM485_8 0x106b
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM232_2DB 0x1091
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_MPCIE_COM232_2 0x1093
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM232_4 0x1098
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM232_4DB 0x1099
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_MPCIE_COM232_4 0x109b
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM232_8 0x10a9
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM_2SMDB 0x10d1
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_MPCIE_COM_2SM 0x10d3
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM_4SM 0x10d9
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM_4SMDB 0x10da
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_MPCIE_COM_4SM 0x10dc
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM_8SM 0x10e9
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM485_1 0x1108
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM422_2 0x1110
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM485_2 0x1111
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM422_4 0x1118
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM485_4 0x1119
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_PCIE_ICM_2S 0x1152
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_PCIE_ICM_4S 0x115a
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_PCIE_ICM232_2 0x1190
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM232_2 0x1191
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_PCIE_ICM232_4 0x1198
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM232_4 0x1199
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_PCIE_ICM_2SM 0x11d0
|
||
|
|
#define PCI_DEVICE_ID_ACCESSIO_PCIE_ICM_4SM 0x11d8
|
||
|
|
|
||
|
|
struct pericom8250 {
|
||
|
|
void __iomem *virt;
|
||
|
|
unsigned int nr;
|
||
|
|
int line[];
|
||
|
|
};
|
||
|
|
|
||
|
|
static void pericom_do_set_divisor(struct uart_port *port, unsigned int baud,
|
||
|
|
unsigned int quot, unsigned int quot_frac)
|
||
|
|
{
|
||
|
|
int scr;
|
||
|
|
|
||
|
|
for (scr = 16; scr > 4; scr--) {
|
||
|
|
unsigned int maxrate = port->uartclk / scr;
|
||
|
|
unsigned int divisor = max(maxrate / baud, 1U);
|
||
|
|
int delta = maxrate / divisor - baud;
|
||
|
|
|
||
|
|
if (baud > maxrate + baud / 50)
|
||
|
|
continue;
|
||
|
|
|
||
|
|
if (delta > baud / 50)
|
||
|
|
divisor++;
|
||
|
|
|
||
|
|
if (divisor > 0xffff)
|
||
|
|
continue;
|
||
|
|
|
||
|
|
/* Update delta due to possible divisor change */
|
||
|
|
delta = maxrate / divisor - baud;
|
||
|
|
if (abs(delta) < baud / 50) {
|
||
|
|
struct uart_8250_port *up = up_to_u8250p(port);
|
||
|
|
int lcr = serial_port_in(port, UART_LCR);
|
||
|
|
|
||
|
|
serial_port_out(port, UART_LCR, lcr | 0x80);
|
||
|
|
serial_dl_write(up, divisor);
|
||
|
|
serial_port_out(port, 2, 16 - scr);
|
||
|
|
serial_port_out(port, UART_LCR, lcr);
|
||
|
|
return;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
static int pericom8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
|
||
|
|
{
|
||
|
|
unsigned int nr, i, bar = 0, maxnr;
|
||
|
|
struct pericom8250 *pericom;
|
||
|
|
struct uart_8250_port uart;
|
||
|
|
int ret;
|
||
|
|
|
||
|
|
ret = pcim_enable_device(pdev);
|
||
|
|
if (ret)
|
||
|
|
return ret;
|
||
|
|
|
||
|
|
maxnr = pci_resource_len(pdev, bar) >> 3;
|
||
|
|
|
||
|
|
if (pdev->vendor == PCI_VENDOR_ID_PERICOM)
|
||
|
|
nr = pdev->device & 0x0f;
|
||
|
|
else if (pdev->vendor == PCI_VENDOR_ID_ACCESSIO)
|
||
|
|
nr = BIT(((pdev->device & 0x38) >> 3) - 1);
|
||
|
|
else
|
||
|
|
nr = 1;
|
||
|
|
|
||
|
|
pericom = devm_kzalloc(&pdev->dev, struct_size(pericom, line, nr), GFP_KERNEL);
|
||
|
|
if (!pericom)
|
||
|
|
return -ENOMEM;
|
||
|
|
|
||
|
|
pericom->virt = pcim_iomap(pdev, bar, 0);
|
||
|
|
if (!pericom->virt)
|
||
|
|
return -ENOMEM;
|
||
|
|
|
||
|
|
memset(&uart, 0, sizeof(uart));
|
||
|
|
|
||
|
|
uart.port.dev = &pdev->dev;
|
||
|
|
uart.port.irq = pdev->irq;
|
||
|
|
uart.port.private_data = pericom;
|
||
|
|
uart.port.iotype = UPIO_PORT;
|
||
|
|
uart.port.uartclk = 921600 * 16;
|
||
|
|
uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
|
||
|
|
uart.port.set_divisor = pericom_do_set_divisor;
|
||
|
|
for (i = 0; i < nr && i < maxnr; i++) {
|
||
|
|
unsigned int offset = (i == 3 && nr == 4) ? 0x38 : i * 0x8;
|
||
|
|
|
||
|
|
uart.port.iobase = pci_resource_start(pdev, bar) + offset;
|
||
|
|
|
||
|
|
dev_dbg(&pdev->dev, "Setup PCI port: port %lx, irq %d, type %d\n",
|
||
|
|
uart.port.iobase, uart.port.irq, uart.port.iotype);
|
||
|
|
|
||
|
|
pericom->line[i] = serial8250_register_8250_port(&uart);
|
||
|
|
if (pericom->line[i] < 0) {
|
||
|
|
dev_err(&pdev->dev,
|
||
|
|
"Couldn't register serial port %lx, irq %d, type %d, error %d\n",
|
||
|
|
uart.port.iobase, uart.port.irq,
|
||
|
|
uart.port.iotype, pericom->line[i]);
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
pericom->nr = i;
|
||
|
|
|
||
|
|
pci_set_drvdata(pdev, pericom);
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static void pericom8250_remove(struct pci_dev *pdev)
|
||
|
|
{
|
||
|
|
struct pericom8250 *pericom = pci_get_drvdata(pdev);
|
||
|
|
unsigned int i;
|
||
|
|
|
||
|
|
for (i = 0; i < pericom->nr; i++)
|
||
|
|
serial8250_unregister_port(pericom->line[i]);
|
||
|
|
}
|
||
|
|
|
||
|
|
static const struct pci_device_id pericom8250_pci_ids[] = {
|
||
|
|
/*
|
||
|
|
* Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART
|
||
|
|
* (Only 7954 has an offset jump for port 4)
|
||
|
|
*/
|
||
|
|
{ PCI_VDEVICE(PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7951) },
|
||
|
|
{ PCI_VDEVICE(PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7952) },
|
||
|
|
{ PCI_VDEVICE(PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7954) },
|
||
|
|
{ PCI_VDEVICE(PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7958) },
|
||
|
|
|
||
|
|
/*
|
||
|
|
* ACCES I/O Products quad
|
||
|
|
* (Only 7954 has an offset jump for port 4)
|
||
|
|
*/
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM_2SDB) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_COM_2S) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM422_4) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM485_4) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM_4SDB) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_COM_4S) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM422_8) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM485_8) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM232_2DB) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_COM232_2) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM232_4) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM232_4DB) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_COM232_4) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM232_8) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM_2SMDB) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_COM_2SM) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM_4SM) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM_4SMDB) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_COM_4SM) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM_8SM) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM485_1) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM422_2) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM485_2) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM422_4) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM485_4) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_ICM_2S) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_ICM_4S) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_ICM232_2) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM232_2) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_ICM232_4) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM232_4) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_ICM_2SM) },
|
||
|
|
{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_ICM_4SM) },
|
||
|
|
{ }
|
||
|
|
};
|
||
|
|
MODULE_DEVICE_TABLE(pci, pericom8250_pci_ids);
|
||
|
|
|
||
|
|
static struct pci_driver pericom8250_pci_driver = {
|
||
|
|
.name = "8250_pericom",
|
||
|
|
.id_table = pericom8250_pci_ids,
|
||
|
|
.probe = pericom8250_probe,
|
||
|
|
.remove = pericom8250_remove,
|
||
|
|
};
|
||
|
|
module_pci_driver(pericom8250_pci_driver);
|
||
|
|
|
||
|
|
MODULE_LICENSE("GPL v2");
|
||
|
|
MODULE_DESCRIPTION("Pericom UART driver");
|