linux/linux-5.18.11/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi

253 lines
6.4 KiB
Plaintext
Raw Normal View History

2024-03-22 18:12:32 +00:00
/*
* MPC8536 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8536-elbc", "fsl,elbc", "simple-bus";
interrupts = <19 2 0 0>;
};
/* controller at 0x8000 */
&pci0 {
compatible = "fsl,mpc8540-pci";
device_type = "pci";
interrupts = <24 0x2 0 0>;
bus-range = <0 0xff>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
};
/* controller at 0x9000 */
&pci1 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <25 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <25 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
>;
};
};
/* controller at 0xa000 */
&pci2 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <26 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <26 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
>;
};
};
/* controller at 0xb000 */
&pci3 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <27 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <27 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8536-immr", "simple-bus";
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
};
ecm@1000 {
compatible = "fsl,mpc8536-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <17 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,mpc8536-memory-controller";
reg = <0x2000 0x1000>;
interrupts = <18 2 0 0>;
};
/include/ "pq3-i2c-0.dtsi"
/include/ "pq3-i2c-1.dtsi"
/include/ "pq3-duart-0.dtsi"
/include/ "pq3-espi-0.dtsi"
spi@7000 {
fsl,espi-num-chipselects = <4>;
};
/include/ "pq3-gpio-0.dtsi"
/* mark compat w/8572 to get some erratum treatment */
gpio-controller@f000 {
compatible = "fsl,mpc8572-gpio";
};
sata@18000 {
compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
reg = <0x18000 0x1000>;
cell-index = <1>;
interrupts = <74 0x2 0 0>;
};
sata@19000 {
compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
reg = <0x19000 0x1000>;
cell-index = <2>;
interrupts = <41 0x2 0 0>;
};
L2: l2-cache-controller@20000 {
compatible = "fsl,mpc8536-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x80000>; // L2, 512K
interrupts = <16 2 0 0>;
};
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-etsec1-0.dtsi"
/include/ "pq3-etsec1-timer-0.dtsi"
usb@22000 {
compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
reg = <0x22000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <28 0x2 0 0>;
};
usb@23000 {
compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
reg = <0x23000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <46 0x2 0 0>;
};
ptp_clock@24e00 {
interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
};
/include/ "pq3-etsec1-2.dtsi"
ethernet@26000 {
cell-index = <1>;
};
usb@2b000 {
compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
reg = <0x2b000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <60 0x2 0 0>;
};
/include/ "pq3-esdhc-0.dtsi"
sdhc@2e000 {
compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
};
/include/ "pq3-sec3.0-0.dtsi"
/include/ "pq3-mpic.dtsi"
/include/ "pq3-mpic-timer-B.dtsi"
global-utilities@e0000 {
compatible = "fsl,mpc8536-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
};