linux/linux-5.18.11/arch/mips/include/asm/octeon/octeon.h

366 lines
12 KiB
C
Raw Normal View History

2024-03-22 18:12:32 +00:00
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2004-2008 Cavium Networks
*/
#ifndef __ASM_OCTEON_OCTEON_H
#define __ASM_OCTEON_OCTEON_H
#include <asm/octeon/cvmx.h>
#include <asm/bitfield.h>
extern uint64_t octeon_bootmem_alloc_range_phys(uint64_t size,
uint64_t alignment,
uint64_t min_addr,
uint64_t max_addr,
int do_locking);
extern void *octeon_bootmem_alloc(uint64_t size, uint64_t alignment,
int do_locking);
extern void *octeon_bootmem_alloc_range(uint64_t size, uint64_t alignment,
uint64_t min_addr, uint64_t max_addr,
int do_locking);
extern void *octeon_bootmem_alloc_named(uint64_t size, uint64_t alignment,
char *name);
extern void *octeon_bootmem_alloc_named_range(uint64_t size, uint64_t min_addr,
uint64_t max_addr, uint64_t align,
char *name);
extern void *octeon_bootmem_alloc_named_address(uint64_t size, uint64_t address,
char *name);
extern int octeon_bootmem_free_named(char *name);
extern void octeon_bootmem_lock(void);
extern void octeon_bootmem_unlock(void);
extern int octeon_is_simulation(void);
extern int octeon_is_pci_host(void);
extern int octeon_usb_is_ref_clk(void);
extern uint64_t octeon_get_clock_rate(void);
extern u64 octeon_get_io_clock_rate(void);
extern const char *octeon_board_type_string(void);
extern const char *octeon_get_pci_interrupts(void);
extern int octeon_get_southbridge_interrupt(void);
extern int octeon_get_boot_coremask(void);
extern int octeon_get_boot_num_arguments(void);
extern const char *octeon_get_boot_argument(int arg);
extern void octeon_hal_setup_reserved32(void);
extern void octeon_user_io_init(void);
extern void octeon_init_cvmcount(void);
extern void octeon_setup_delays(void);
extern void octeon_io_clk_delay(unsigned long);
#define OCTEON_ARGV_MAX_ARGS 64
#define OCTEON_SERIAL_LEN 20
struct octeon_boot_descriptor {
#ifdef __BIG_ENDIAN_BITFIELD
/* Start of block referenced by assembly code - do not change! */
uint32_t desc_version;
uint32_t desc_size;
uint64_t stack_top;
uint64_t heap_base;
uint64_t heap_end;
/* Only used by bootloader */
uint64_t entry_point;
uint64_t desc_vaddr;
/* End of This block referenced by assembly code - do not change! */
uint32_t exception_base_addr;
uint32_t stack_size;
uint32_t heap_size;
/* Argc count for application. */
uint32_t argc;
uint32_t argv[OCTEON_ARGV_MAX_ARGS];
#define BOOT_FLAG_INIT_CORE (1 << 0)
#define OCTEON_BL_FLAG_DEBUG (1 << 1)
#define OCTEON_BL_FLAG_NO_MAGIC (1 << 2)
/* If set, use uart1 for console */
#define OCTEON_BL_FLAG_CONSOLE_UART1 (1 << 3)
/* If set, use PCI console */
#define OCTEON_BL_FLAG_CONSOLE_PCI (1 << 4)
/* Call exit on break on serial port */
#define OCTEON_BL_FLAG_BREAK (1 << 5)
uint32_t flags;
uint32_t core_mask;
/* DRAM size in megabyes. */
uint32_t dram_size;
/* physical address of free memory descriptor block. */
uint32_t phy_mem_desc_addr;
/* used to pass flags from app to debugger. */
uint32_t debugger_flags_base_addr;
/* CPU clock speed, in hz. */
uint32_t eclock_hz;
/* DRAM clock speed, in hz. */
uint32_t dclock_hz;
/* SPI4 clock in hz. */
uint32_t spi_clock_hz;
uint16_t board_type;
uint8_t board_rev_major;
uint8_t board_rev_minor;
uint16_t chip_type;
uint8_t chip_rev_major;
uint8_t chip_rev_minor;
char board_serial_number[OCTEON_SERIAL_LEN];
uint8_t mac_addr_base[6];
uint8_t mac_addr_count;
uint64_t cvmx_desc_vaddr;
#else
uint32_t desc_size;
uint32_t desc_version;
uint64_t stack_top;
uint64_t heap_base;
uint64_t heap_end;
/* Only used by bootloader */
uint64_t entry_point;
uint64_t desc_vaddr;
/* End of This block referenced by assembly code - do not change! */
uint32_t stack_size;
uint32_t exception_base_addr;
uint32_t argc;
uint32_t heap_size;
/*
* Argc count for application.
* Warning low bit scrambled in little-endian.
*/
uint32_t argv[OCTEON_ARGV_MAX_ARGS];
#define BOOT_FLAG_INIT_CORE (1 << 0)
#define OCTEON_BL_FLAG_DEBUG (1 << 1)
#define OCTEON_BL_FLAG_NO_MAGIC (1 << 2)
/* If set, use uart1 for console */
#define OCTEON_BL_FLAG_CONSOLE_UART1 (1 << 3)
/* If set, use PCI console */
#define OCTEON_BL_FLAG_CONSOLE_PCI (1 << 4)
/* Call exit on break on serial port */
#define OCTEON_BL_FLAG_BREAK (1 << 5)
uint32_t core_mask;
uint32_t flags;
/* physical address of free memory descriptor block. */
uint32_t phy_mem_desc_addr;
/* DRAM size in megabyes. */
uint32_t dram_size;
/* CPU clock speed, in hz. */
uint32_t eclock_hz;
/* used to pass flags from app to debugger. */
uint32_t debugger_flags_base_addr;
/* SPI4 clock in hz. */
uint32_t spi_clock_hz;
/* DRAM clock speed, in hz. */
uint32_t dclock_hz;
uint8_t chip_rev_minor;
uint8_t chip_rev_major;
uint16_t chip_type;
uint8_t board_rev_minor;
uint8_t board_rev_major;
uint16_t board_type;
uint64_t unused1[4]; /* Not even filled in by bootloader. */
uint64_t cvmx_desc_vaddr;
#endif
};
union octeon_cvmemctl {
uint64_t u64;
struct {
/* RO 1 = BIST fail, 0 = BIST pass */
__BITFIELD_FIELD(uint64_t tlbbist:1,
/* RO 1 = BIST fail, 0 = BIST pass */
__BITFIELD_FIELD(uint64_t l1cbist:1,
/* RO 1 = BIST fail, 0 = BIST pass */
__BITFIELD_FIELD(uint64_t l1dbist:1,
/* RO 1 = BIST fail, 0 = BIST pass */
__BITFIELD_FIELD(uint64_t dcmbist:1,
/* RO 1 = BIST fail, 0 = BIST pass */
__BITFIELD_FIELD(uint64_t ptgbist:1,
/* RO 1 = BIST fail, 0 = BIST pass */
__BITFIELD_FIELD(uint64_t wbfbist:1,
/* Reserved */
__BITFIELD_FIELD(uint64_t reserved:17,
/* OCTEON II - TLB replacement policy: 0 = bitmask LRU; 1 = NLU.
* This field selects between the TLB replacement policies:
* bitmask LRU or NLU. Bitmask LRU maintains a mask of
* recently used TLB entries and avoids them as new entries
* are allocated. NLU simply guarantees that the next
* allocation is not the last used TLB entry. */
__BITFIELD_FIELD(uint64_t tlbnlu:1,
/* OCTEON II - Selects the bit in the counter used for
* releasing a PAUSE. This counter trips every 2(8+PAUSETIME)
* cycles. If not already released, the cnMIPS II core will
* always release a given PAUSE instruction within
* 2(8+PAUSETIME). If the counter trip happens to line up,
* the cnMIPS II core may release the PAUSE instantly. */
__BITFIELD_FIELD(uint64_t pausetime:3,
/* OCTEON II - This field is an extension of
* CvmMemCtl[DIDTTO] */
__BITFIELD_FIELD(uint64_t didtto2:1,
/* R/W If set, marked write-buffer entries time out
* the same as other entries; if clear, marked
* write-buffer entries use the maximum timeout. */
__BITFIELD_FIELD(uint64_t dismarkwblongto:1,
/* R/W If set, a merged store does not clear the
* write-buffer entry timeout state. */
__BITFIELD_FIELD(uint64_t dismrgclrwbto:1,
/* R/W Two bits that are the MSBs of the resultant
* CVMSEG LM word location for an IOBDMA. The other 8
* bits come from the SCRADDR field of the IOBDMA. */
__BITFIELD_FIELD(uint64_t iobdmascrmsb:2,
/* R/W If set, SYNCWS and SYNCS only order marked
* stores; if clear, SYNCWS and SYNCS only order
* unmarked stores. SYNCWSMARKED has no effect when
* DISSYNCWS is set. */
__BITFIELD_FIELD(uint64_t syncwsmarked:1,
/* R/W If set, SYNCWS acts as SYNCW and SYNCS acts as
* SYNC. */
__BITFIELD_FIELD(uint64_t dissyncws:1,
/* R/W If set, no stall happens on write buffer
* full. */
__BITFIELD_FIELD(uint64_t diswbfst:1,
/* R/W If set (and SX set), supervisor-level
* loads/stores can use XKPHYS addresses with
* VA<48>==0 */
__BITFIELD_FIELD(uint64_t xkmemenas:1,
/* R/W If set (and UX set), user-level loads/stores
* can use XKPHYS addresses with VA<48>==0 */
__BITFIELD_FIELD(uint64_t xkmemenau:1,
/* R/W If set (and SX set), supervisor-level
* loads/stores can use XKPHYS addresses with
* VA<48>==1 */
__BITFIELD_FIELD(uint64_t xkioenas:1,
/* R/W If set (and UX set), user-level loads/stores
* can use XKPHYS addresses with VA<48>==1 */
__BITFIELD_FIELD(uint64_t xkioenau:1,
/* R/W If set, all stores act as SYNCW (NOMERGE must
* be set when this is set) RW, reset to 0. */
__BITFIELD_FIELD(uint64_t allsyncw:1,
/* R/W If set, no stores merge, and all stores reach
* the coherent bus in order. */
__BITFIELD_FIELD(uint64_t nomerge:1,
/* R/W Selects the bit in the counter used for DID
* time-outs 0 = 231, 1 = 230, 2 = 229, 3 =
* 214. Actual time-out is between 1x and 2x this
* interval. For example, with DIDTTO=3, expiration
* interval is between 16K and 32K. */
__BITFIELD_FIELD(uint64_t didtto:2,
/* R/W If set, the (mem) CSR clock never turns off. */
__BITFIELD_FIELD(uint64_t csrckalwys:1,
/* R/W If set, mclk never turns off. */
__BITFIELD_FIELD(uint64_t mclkalwys:1,
/* R/W Selects the bit in the counter used for write
* buffer flush time-outs (WBFLT+11) is the bit
* position in an internal counter used to determine
* expiration. The write buffer expires between 1x and
* 2x this interval. For example, with WBFLT = 0, a
* write buffer expires between 2K and 4K cycles after
* the write buffer entry is allocated. */
__BITFIELD_FIELD(uint64_t wbfltime:3,
/* R/W If set, do not put Istream in the L2 cache. */
__BITFIELD_FIELD(uint64_t istrnol2:1,
/* R/W The write buffer threshold. */
__BITFIELD_FIELD(uint64_t wbthresh:4,
/* Reserved */
__BITFIELD_FIELD(uint64_t reserved2:2,
/* R/W If set, CVMSEG is available for loads/stores in
* kernel/debug mode. */
__BITFIELD_FIELD(uint64_t cvmsegenak:1,
/* R/W If set, CVMSEG is available for loads/stores in
* supervisor mode. */
__BITFIELD_FIELD(uint64_t cvmsegenas:1,
/* R/W If set, CVMSEG is available for loads/stores in
* user mode. */
__BITFIELD_FIELD(uint64_t cvmsegenau:1,
/* R/W Size of local memory in cache blocks, 54 (6912
* bytes) is max legal value. */
__BITFIELD_FIELD(uint64_t lmemsz:6,
;)))))))))))))))))))))))))))))))))
} s;
};
extern void octeon_check_cpu_bist(void);
int octeon_prune_device_tree(void);
extern const char __dtb_octeon_3xxx_begin;
extern const char __dtb_octeon_68xx_begin;
/**
* Write a 32bit value to the Octeon NPI register space
*
* @address: Address to write to
* @val: Value to write
*/
static inline void octeon_npi_write32(uint64_t address, uint32_t val)
{
cvmx_write64_uint32(address ^ 4, val);
cvmx_read64_uint32(address ^ 4);
}
#ifdef CONFIG_SMP
void octeon_setup_smp(void);
#else
static inline void octeon_setup_smp(void) {}
#endif
struct irq_domain;
struct device_node;
struct irq_data;
struct irq_chip;
void octeon_ciu3_mbox_send(int cpu, unsigned int mbox);
int octeon_irq_ciu3_xlat(struct irq_domain *d,
struct device_node *node,
const u32 *intspec,
unsigned int intsize,
unsigned long *out_hwirq,
unsigned int *out_type);
void octeon_irq_ciu3_enable(struct irq_data *data);
void octeon_irq_ciu3_disable(struct irq_data *data);
void octeon_irq_ciu3_ack(struct irq_data *data);
void octeon_irq_ciu3_mask(struct irq_data *data);
void octeon_irq_ciu3_mask_ack(struct irq_data *data);
int octeon_irq_ciu3_mapx(struct irq_domain *d, unsigned int virq,
irq_hw_number_t hw, struct irq_chip *chip);
/* Octeon multiplier save/restore routines from octeon_switch.S */
void octeon_mult_save(void);
void octeon_mult_restore(void);
void octeon_mult_save_end(void);
void octeon_mult_restore_end(void);
void octeon_mult_save3(void);
void octeon_mult_save3_end(void);
void octeon_mult_save2(void);
void octeon_mult_save2_end(void);
void octeon_mult_restore3(void);
void octeon_mult_restore3_end(void);
void octeon_mult_restore2(void);
void octeon_mult_restore2_end(void);
/**
* Read a 32bit value from the Octeon NPI register space
*
* @address: Address to read
* Returns The result
*/
static inline uint32_t octeon_npi_read32(uint64_t address)
{
return cvmx_read64_uint32(address ^ 4);
}
extern struct cvmx_bootinfo *octeon_bootinfo;
extern uint64_t octeon_bootloader_entry_addr;
extern void (*octeon_irq_setup_secondary)(void);
typedef void (*octeon_irq_ip4_handler_t)(void);
void octeon_irq_set_ip4_handler(octeon_irq_ip4_handler_t);
extern void octeon_fixup_irqs(void);
extern struct semaphore octeon_bootbus_sem;
struct irq_domain *octeon_irq_get_block_domain(int node, uint8_t block);
#endif /* __ASM_OCTEON_OCTEON_H */