556 lines
10 KiB
Plaintext
556 lines
10 KiB
Plaintext
|
// SPDX-License-Identifier: BSD-3-Clause
|
||
|
|
/*
|
||
|
|
* sc7280 IDP board device tree source (common between SKU1 and SKU2)
|
||
|
|
*
|
||
|
|
* Copyright (c) 2021, The Linux Foundation. All rights reserved.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
|
||
|
|
#include <dt-bindings/input/linux-event-codes.h>
|
||
|
|
#include "sc7280.dtsi"
|
||
|
|
#include "pm7325.dtsi"
|
||
|
|
#include "pm8350c.dtsi"
|
||
|
|
#include "pmk8350.dtsi"
|
||
|
|
|
||
|
|
#include "sc7280-chrome-common.dtsi"
|
||
|
|
|
||
|
|
/ {
|
||
|
|
aliases {
|
||
|
|
bluetooth0 = &bluetooth;
|
||
|
|
serial1 = &uart7;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio-keys {
|
||
|
|
compatible = "gpio-keys";
|
||
|
|
label = "gpio-keys";
|
||
|
|
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&key_vol_up_default>;
|
||
|
|
|
||
|
|
volume-up {
|
||
|
|
label = "volume_up";
|
||
|
|
gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
|
||
|
|
linux,input-type = <1>;
|
||
|
|
linux,code = <KEY_VOLUMEUP>;
|
||
|
|
gpio-key,wakeup;
|
||
|
|
debounce-interval = <15>;
|
||
|
|
linux,can-disable;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
nvme_3v3_regulator: nvme-3v3-regulator {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "VLDO_3V3";
|
||
|
|
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
|
||
|
|
enable-active-high;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&nvme_pwren>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&apps_rsc {
|
||
|
|
pm7325-regulators {
|
||
|
|
compatible = "qcom,pm7325-rpmh-regulators";
|
||
|
|
qcom,pmic-id = "b";
|
||
|
|
|
||
|
|
vreg_s1b_1p8: smps1 {
|
||
|
|
regulator-min-microvolt = <1856000>;
|
||
|
|
regulator-max-microvolt = <2040000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_s7b_0p9: smps7 {
|
||
|
|
regulator-min-microvolt = <535000>;
|
||
|
|
regulator-max-microvolt = <1120000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_s8b_1p2: smps8 {
|
||
|
|
regulator-min-microvolt = <1256000>;
|
||
|
|
regulator-max-microvolt = <1500000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l1b_0p8: ldo1 {
|
||
|
|
regulator-min-microvolt = <825000>;
|
||
|
|
regulator-max-microvolt = <925000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l2b_3p0: ldo2 {
|
||
|
|
regulator-min-microvolt = <2700000>;
|
||
|
|
regulator-max-microvolt = <3544000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l6b_1p2: ldo6 {
|
||
|
|
regulator-min-microvolt = <1140000>;
|
||
|
|
regulator-max-microvolt = <1260000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l7b_2p9: ldo7 {
|
||
|
|
regulator-min-microvolt = <2960000>;
|
||
|
|
regulator-max-microvolt = <2960000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l8b_0p9: ldo8 {
|
||
|
|
regulator-min-microvolt = <870000>;
|
||
|
|
regulator-max-microvolt = <970000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l9b_1p2: ldo9 {
|
||
|
|
regulator-min-microvolt = <1080000>;
|
||
|
|
regulator-max-microvolt = <1304000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l11b_1p7: ldo11 {
|
||
|
|
regulator-min-microvolt = <1504000>;
|
||
|
|
regulator-max-microvolt = <2000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l12b_0p8: ldo12 {
|
||
|
|
regulator-min-microvolt = <751000>;
|
||
|
|
regulator-max-microvolt = <824000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l13b_0p8: ldo13 {
|
||
|
|
regulator-min-microvolt = <530000>;
|
||
|
|
regulator-max-microvolt = <824000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l14b_1p2: ldo14 {
|
||
|
|
regulator-min-microvolt = <1080000>;
|
||
|
|
regulator-max-microvolt = <1304000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l15b_0p8: ldo15 {
|
||
|
|
regulator-min-microvolt = <765000>;
|
||
|
|
regulator-max-microvolt = <1020000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l16b_1p2: ldo16 {
|
||
|
|
regulator-min-microvolt = <1100000>;
|
||
|
|
regulator-max-microvolt = <1300000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l17b_1p8: ldo17 {
|
||
|
|
regulator-min-microvolt = <1700000>;
|
||
|
|
regulator-max-microvolt = <1900000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l18b_1p8: ldo18 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <2000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l19b_1p8: ldo19 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
pm8350c-regulators {
|
||
|
|
compatible = "qcom,pm8350c-rpmh-regulators";
|
||
|
|
qcom,pmic-id = "c";
|
||
|
|
|
||
|
|
vreg_s1c_2p2: smps1 {
|
||
|
|
regulator-min-microvolt = <2190000>;
|
||
|
|
regulator-max-microvolt = <2210000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_s9c_1p0: smps9 {
|
||
|
|
regulator-min-microvolt = <1010000>;
|
||
|
|
regulator-max-microvolt = <1170000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l1c_1p8: ldo1 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1980000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l2c_1p8: ldo2 {
|
||
|
|
regulator-min-microvolt = <1620000>;
|
||
|
|
regulator-max-microvolt = <1980000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l3c_3p0: ldo3 {
|
||
|
|
regulator-min-microvolt = <2800000>;
|
||
|
|
regulator-max-microvolt = <3540000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l4c_1p8: ldo4 {
|
||
|
|
regulator-min-microvolt = <1620000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l5c_1p8: ldo5 {
|
||
|
|
regulator-min-microvolt = <1620000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l6c_2p9: ldo6 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <2950000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l7c_3p0: ldo7 {
|
||
|
|
regulator-min-microvolt = <3000000>;
|
||
|
|
regulator-max-microvolt = <3544000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l8c_1p8: ldo8 {
|
||
|
|
regulator-min-microvolt = <1620000>;
|
||
|
|
regulator-max-microvolt = <2000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l9c_2p9: ldo9 {
|
||
|
|
regulator-min-microvolt = <2960000>;
|
||
|
|
regulator-max-microvolt = <2960000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l10c_0p8: ldo10 {
|
||
|
|
regulator-min-microvolt = <720000>;
|
||
|
|
regulator-max-microvolt = <1050000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l11c_2p8: ldo11 {
|
||
|
|
regulator-min-microvolt = <2800000>;
|
||
|
|
regulator-max-microvolt = <3544000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l12c_1p8: ldo12 {
|
||
|
|
regulator-min-microvolt = <1650000>;
|
||
|
|
regulator-max-microvolt = <2000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l13c_3p0: ldo13 {
|
||
|
|
regulator-min-microvolt = <2700000>;
|
||
|
|
regulator-max-microvolt = <3544000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_bob: bob {
|
||
|
|
regulator-min-microvolt = <3008000>;
|
||
|
|
regulator-max-microvolt = <3960000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&ipa {
|
||
|
|
status = "okay";
|
||
|
|
modem-init;
|
||
|
|
};
|
||
|
|
|
||
|
|
&pcie1 {
|
||
|
|
status = "okay";
|
||
|
|
perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>;
|
||
|
|
|
||
|
|
vddpe-3v3-supply = <&nvme_3v3_regulator>;
|
||
|
|
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&pcie1_phy {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
vdda-phy-supply = <&vreg_l10c_0p8>;
|
||
|
|
vdda-pll-supply = <&vreg_l6b_1p2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&pmk8350_vadc {
|
||
|
|
pmk8350_die_temp {
|
||
|
|
reg = <PMK8350_ADC7_DIE_TEMP>;
|
||
|
|
label = "pmk8350_die_temp";
|
||
|
|
qcom,pre-scaling = <1 1>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&qfprom {
|
||
|
|
vcc-supply = <&vreg_l1c_1p8>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&qupv3_id_0 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&qupv3_id_1 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdhc_1 {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
non-removable;
|
||
|
|
no-sd;
|
||
|
|
no-sdio;
|
||
|
|
|
||
|
|
vmmc-supply = <&vreg_l7b_2p9>;
|
||
|
|
vqmmc-supply = <&vreg_l19b_1p8>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdhc_2 {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
|
||
|
|
pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
|
||
|
|
|
||
|
|
vmmc-supply = <&vreg_l9c_2p9>;
|
||
|
|
vqmmc-supply = <&vreg_l6c_2p9>;
|
||
|
|
|
||
|
|
cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart5 {
|
||
|
|
compatible = "qcom,geni-debug-uart";
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_1 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_1_dwc3 {
|
||
|
|
dr_mode = "host";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_1_hsphy {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
vdda-pll-supply = <&vreg_l10c_0p8>;
|
||
|
|
vdda33-supply = <&vreg_l2b_3p0>;
|
||
|
|
vdda18-supply = <&vreg_l1c_1p8>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_1_qmpphy {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
vdda-phy-supply = <&vreg_l6b_1p2>;
|
||
|
|
vdda-pll-supply = <&vreg_l1b_0p8>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart7 {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
/delete-property/interrupts;
|
||
|
|
interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
|
||
|
|
pinctrl-names = "default", "sleep";
|
||
|
|
pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
|
||
|
|
|
||
|
|
bluetooth: bluetooth {
|
||
|
|
compatible = "qcom,wcn6750-bt";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&bt_en>, <&sw_ctrl>;
|
||
|
|
enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
|
||
|
|
swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
|
||
|
|
vddaon-supply = <&vreg_s7b_0p9>;
|
||
|
|
vddbtcxmx-supply = <&vreg_s7b_0p9>;
|
||
|
|
vddrfacmn-supply = <&vreg_s7b_0p9>;
|
||
|
|
vddrfa0p8-supply = <&vreg_s7b_0p9>;
|
||
|
|
vddrfa1p7-supply = <&vreg_s1b_1p8>;
|
||
|
|
vddrfa1p2-supply = <&vreg_s8b_1p2>;
|
||
|
|
vddrfa2p2-supply = <&vreg_s1c_2p2>;
|
||
|
|
vddasd-supply = <&vreg_l11c_2p8>;
|
||
|
|
max-speed = <3200000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/* PINCTRL - additions to nodes defined in sc7280.dtsi */
|
||
|
|
|
||
|
|
&dp_hot_plug_det {
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
|
||
|
|
&pm7325_gpios {
|
||
|
|
key_vol_up_default: key-vol-up-default {
|
||
|
|
pins = "gpio6";
|
||
|
|
function = "normal";
|
||
|
|
input-enable;
|
||
|
|
bias-pull-up;
|
||
|
|
power-source = <0>;
|
||
|
|
qcom,drive-strength = <3>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pcie1_clkreq_n {
|
||
|
|
bias-pull-up;
|
||
|
|
drive-strength = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&qspi_cs0 {
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
|
||
|
|
&qspi_clk {
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
|
||
|
|
&qspi_data01 {
|
||
|
|
/* High-Z when no transfers; nice to park the lines */
|
||
|
|
bias-pull-up;
|
||
|
|
};
|
||
|
|
|
||
|
|
&qup_uart5_tx {
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
|
||
|
|
&qup_uart5_rx {
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-pull-up;
|
||
|
|
};
|
||
|
|
|
||
|
|
&qup_uart7_cts {
|
||
|
|
/*
|
||
|
|
* Configure a bias-bus-hold on CTS to lower power
|
||
|
|
* usage when Bluetooth is turned off. Bus hold will
|
||
|
|
* maintain a low power state regardless of whether
|
||
|
|
* the Bluetooth module drives the pin in either
|
||
|
|
* direction or leaves the pin fully unpowered.
|
||
|
|
*/
|
||
|
|
bias-bus-hold;
|
||
|
|
};
|
||
|
|
|
||
|
|
&qup_uart7_rts {
|
||
|
|
/* We'll drive RTS, so no pull */
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
|
||
|
|
&qup_uart7_tx {
|
||
|
|
/* We'll drive TX, so no pull */
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
|
||
|
|
&qup_uart7_rx {
|
||
|
|
/*
|
||
|
|
* Configure a pull-up on RX. This is needed to avoid
|
||
|
|
* garbage data when the TX pin of the Bluetooth module is
|
||
|
|
* in tri-state (module powered off or not driving the
|
||
|
|
* signal yet).
|
||
|
|
*/
|
||
|
|
bias-pull-up;
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdc1_clk {
|
||
|
|
bias-disable;
|
||
|
|
drive-strength = <16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdc1_cmd {
|
||
|
|
bias-pull-up;
|
||
|
|
drive-strength = <10>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdc1_data {
|
||
|
|
bias-pull-up;
|
||
|
|
drive-strength = <10>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdc1_rclk {
|
||
|
|
bias-pull-down;
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdc2_clk {
|
||
|
|
bias-disable;
|
||
|
|
drive-strength = <16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdc2_cmd {
|
||
|
|
bias-pull-up;
|
||
|
|
drive-strength = <10>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdc2_data {
|
||
|
|
bias-pull-up;
|
||
|
|
drive-strength = <10>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&tlmm {
|
||
|
|
bt_en: bt-en {
|
||
|
|
pins = "gpio85";
|
||
|
|
function = "gpio";
|
||
|
|
output-low;
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
|
||
|
|
nvme_pwren: nvme-pwren {
|
||
|
|
function = "gpio";
|
||
|
|
};
|
||
|
|
|
||
|
|
pcie1_reset_n: pcie1-reset-n {
|
||
|
|
pins = "gpio2";
|
||
|
|
function = "gpio";
|
||
|
|
|
||
|
|
drive-strength = <16>;
|
||
|
|
output-low;
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
|
||
|
|
pcie1_wake_n: pcie1-wake-n {
|
||
|
|
pins = "gpio3";
|
||
|
|
function = "gpio";
|
||
|
|
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-pull-up;
|
||
|
|
};
|
||
|
|
|
||
|
|
qup_uart7_sleep_cts: qup-uart7-sleep-cts {
|
||
|
|
pins = "gpio28";
|
||
|
|
function = "gpio";
|
||
|
|
/*
|
||
|
|
* Configure a bias-bus-hold on CTS to lower power
|
||
|
|
* usage when Bluetooth is turned off. Bus hold will
|
||
|
|
* maintain a low power state regardless of whether
|
||
|
|
* the Bluetooth module drives the pin in either
|
||
|
|
* direction or leaves the pin fully unpowered.
|
||
|
|
*/
|
||
|
|
bias-bus-hold;
|
||
|
|
};
|
||
|
|
|
||
|
|
qup_uart7_sleep_rts: qup-uart7-sleep-rts {
|
||
|
|
pins = "gpio29";
|
||
|
|
function = "gpio";
|
||
|
|
/*
|
||
|
|
* Configure pull-down on RTS. As RTS is active low
|
||
|
|
* signal, pull it low to indicate the BT SoC that it
|
||
|
|
* can wakeup the system anytime from suspend state by
|
||
|
|
* pulling RX low (by sending wakeup bytes).
|
||
|
|
*/
|
||
|
|
bias-pull-down;
|
||
|
|
};
|
||
|
|
|
||
|
|
qup_uart7_sleep_tx: qup-uart7-sleep-tx {
|
||
|
|
pins = "gpio30";
|
||
|
|
function = "gpio";
|
||
|
|
/*
|
||
|
|
* Configure pull-up on TX when it isn't actively driven
|
||
|
|
* to prevent BT SoC from receiving garbage during sleep.
|
||
|
|
*/
|
||
|
|
bias-pull-up;
|
||
|
|
};
|
||
|
|
|
||
|
|
qup_uart7_sleep_rx: qup-uart7-sleep-rx {
|
||
|
|
pins = "gpio31";
|
||
|
|
function = "gpio";
|
||
|
|
/*
|
||
|
|
* Configure a pull-up on RX. This is needed to avoid
|
||
|
|
* garbage data when the TX pin of the Bluetooth module
|
||
|
|
* is floating which may cause spurious wakeups.
|
||
|
|
*/
|
||
|
|
bias-pull-up;
|
||
|
|
};
|
||
|
|
|
||
|
|
sd_cd: sd-cd {
|
||
|
|
pins = "gpio91";
|
||
|
|
function = "gpio";
|
||
|
|
bias-pull-up;
|
||
|
|
};
|
||
|
|
|
||
|
|
sw_ctrl: sw-ctrl {
|
||
|
|
pins = "gpio86";
|
||
|
|
function = "gpio";
|
||
|
|
bias-pull-down;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|