564 lines
12 KiB
Plaintext
564 lines
12 KiB
Plaintext
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
|
/*
|
||
|
|
* Samsung's Exynos4210 based Trats board device tree source
|
||
|
|
*
|
||
|
|
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
|
||
|
|
* http://www.samsung.com
|
||
|
|
*
|
||
|
|
* Device tree source file for Samsung's Trats board which is based on
|
||
|
|
* Samsung's Exynos4210 SoC.
|
||
|
|
*/
|
||
|
|
|
||
|
|
/dts-v1/;
|
||
|
|
#include "exynos4210.dtsi"
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
|
||
|
|
/ {
|
||
|
|
model = "Samsung Trats based on Exynos4210";
|
||
|
|
compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
|
||
|
|
chassis-type = "handset";
|
||
|
|
|
||
|
|
memory@40000000 {
|
||
|
|
device_type = "memory";
|
||
|
|
reg = <0x40000000 0x10000000
|
||
|
|
0x50000000 0x10000000
|
||
|
|
0x60000000 0x10000000
|
||
|
|
0x70000000 0x10000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
chosen {
|
||
|
|
bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
|
||
|
|
stdout-path = "serial2:115200n8";
|
||
|
|
};
|
||
|
|
|
||
|
|
vemmc_reg: regulator-0 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "VMEM_VDD_2.8V";
|
||
|
|
regulator-min-microvolt = <2800000>;
|
||
|
|
regulator-max-microvolt = <2800000>;
|
||
|
|
gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
|
||
|
|
enable-active-high;
|
||
|
|
};
|
||
|
|
|
||
|
|
tsp_reg: regulator-1 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "TSP_FIXED_VOLTAGES";
|
||
|
|
regulator-min-microvolt = <2800000>;
|
||
|
|
regulator-max-microvolt = <2800000>;
|
||
|
|
gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
|
||
|
|
enable-active-high;
|
||
|
|
};
|
||
|
|
|
||
|
|
cam_af_28v_reg: regulator-2 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "8M_AF_2.8V_EN";
|
||
|
|
regulator-min-microvolt = <2800000>;
|
||
|
|
regulator-max-microvolt = <2800000>;
|
||
|
|
gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
|
||
|
|
enable-active-high;
|
||
|
|
};
|
||
|
|
|
||
|
|
cam_io_en_reg: regulator-3 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "CAM_IO_EN";
|
||
|
|
regulator-min-microvolt = <2800000>;
|
||
|
|
regulator-max-microvolt = <2800000>;
|
||
|
|
gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
|
||
|
|
enable-active-high;
|
||
|
|
};
|
||
|
|
|
||
|
|
cam_io_12v_reg: regulator-4 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "8M_1.2V_EN";
|
||
|
|
regulator-min-microvolt = <1200000>;
|
||
|
|
regulator-max-microvolt = <1200000>;
|
||
|
|
gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
|
||
|
|
enable-active-high;
|
||
|
|
};
|
||
|
|
|
||
|
|
vt_core_15v_reg: regulator-5 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "VT_CORE_1.5V";
|
||
|
|
regulator-min-microvolt = <1500000>;
|
||
|
|
regulator-max-microvolt = <1500000>;
|
||
|
|
gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
|
||
|
|
enable-active-high;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio-keys {
|
||
|
|
compatible = "gpio-keys";
|
||
|
|
|
||
|
|
vol-down-key {
|
||
|
|
gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
|
||
|
|
linux,code = <114>;
|
||
|
|
label = "volume down";
|
||
|
|
debounce-interval = <10>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vol-up-key {
|
||
|
|
gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
|
||
|
|
linux,code = <115>;
|
||
|
|
label = "volume up";
|
||
|
|
debounce-interval = <10>;
|
||
|
|
};
|
||
|
|
|
||
|
|
power-key {
|
||
|
|
gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
|
||
|
|
linux,code = <116>;
|
||
|
|
label = "power";
|
||
|
|
debounce-interval = <10>;
|
||
|
|
wakeup-source;
|
||
|
|
};
|
||
|
|
|
||
|
|
ok-key {
|
||
|
|
gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
|
||
|
|
linux,code = <352>;
|
||
|
|
label = "ok";
|
||
|
|
debounce-interval = <10>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
wlan_pwrseq: sdhci3-pwrseq {
|
||
|
|
compatible = "mmc-pwrseq-simple";
|
||
|
|
reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
|
||
|
|
};
|
||
|
|
|
||
|
|
fixed-rate-clocks {
|
||
|
|
xxti {
|
||
|
|
compatible = "samsung,clock-xxti";
|
||
|
|
clock-frequency = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
xusbxti {
|
||
|
|
compatible = "samsung,clock-xusbxti";
|
||
|
|
clock-frequency = <24000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pmic_ap_clk: pmic-ap-clk {
|
||
|
|
/* Workaround for missing clock on max8997 PMIC */
|
||
|
|
compatible = "fixed-clock";
|
||
|
|
#clock-cells = <0>;
|
||
|
|
clock-frequency = <32768>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&camera {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpu0 {
|
||
|
|
cpu0-supply = <&varm_breg>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpu_thermal {
|
||
|
|
cooling-maps {
|
||
|
|
map0 {
|
||
|
|
/* Corresponds to 800MHz at freq_table */
|
||
|
|
cooling-device = <&cpu0 2 2>, <&cpu1 2 2>;
|
||
|
|
};
|
||
|
|
map1 {
|
||
|
|
/* Corresponds to 200MHz at freq_table */
|
||
|
|
cooling-device = <&cpu0 4 4>, <&cpu1 4 4>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&dsi_0 {
|
||
|
|
vddcore-supply = <&vusb_reg>;
|
||
|
|
vddio-supply = <&vmipi_reg>;
|
||
|
|
samsung,burst-clock-frequency = <500000000>;
|
||
|
|
samsung,esc-clock-frequency = <20000000>;
|
||
|
|
samsung,pll-clock-frequency = <24000000>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
panel@0 {
|
||
|
|
reg = <0>;
|
||
|
|
compatible = "samsung,s6e8aa0";
|
||
|
|
vdd3-supply = <&vcclcd_reg>;
|
||
|
|
vci-supply = <&vlcd_reg>;
|
||
|
|
reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
|
||
|
|
power-on-delay= <50>;
|
||
|
|
reset-delay = <100>;
|
||
|
|
init-delay = <100>;
|
||
|
|
flip-horizontal;
|
||
|
|
flip-vertical;
|
||
|
|
panel-width-mm = <58>;
|
||
|
|
panel-height-mm = <103>;
|
||
|
|
|
||
|
|
display-timings {
|
||
|
|
timing-0 {
|
||
|
|
clock-frequency = <57153600>;
|
||
|
|
hactive = <720>;
|
||
|
|
vactive = <1280>;
|
||
|
|
hfront-porch = <5>;
|
||
|
|
hback-porch = <5>;
|
||
|
|
hsync-len = <5>;
|
||
|
|
vfront-porch = <13>;
|
||
|
|
vback-porch = <1>;
|
||
|
|
vsync-len = <2>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&exynos_usbphy {
|
||
|
|
status = "okay";
|
||
|
|
vbus-supply = <&safe1_sreg>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&fimc_0 {
|
||
|
|
status = "okay";
|
||
|
|
assigned-clocks = <&clock CLK_MOUT_FIMC0>,
|
||
|
|
<&clock CLK_SCLK_FIMC0>;
|
||
|
|
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
|
||
|
|
assigned-clock-rates = <0>, <160000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&fimc_1 {
|
||
|
|
status = "okay";
|
||
|
|
assigned-clocks = <&clock CLK_MOUT_FIMC1>,
|
||
|
|
<&clock CLK_SCLK_FIMC1>;
|
||
|
|
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
|
||
|
|
assigned-clock-rates = <0>, <160000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&fimc_2 {
|
||
|
|
status = "okay";
|
||
|
|
assigned-clocks = <&clock CLK_MOUT_FIMC2>,
|
||
|
|
<&clock CLK_SCLK_FIMC2>;
|
||
|
|
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
|
||
|
|
assigned-clock-rates = <0>, <160000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&fimc_3 {
|
||
|
|
status = "okay";
|
||
|
|
assigned-clocks = <&clock CLK_MOUT_FIMC3>,
|
||
|
|
<&clock CLK_SCLK_FIMC3>;
|
||
|
|
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
|
||
|
|
assigned-clock-rates = <0>, <160000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&fimd {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&gpu {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&hsotg {
|
||
|
|
vusb_d-supply = <&vusb_reg>;
|
||
|
|
vusb_a-supply = <&vusbdac_reg>;
|
||
|
|
dr_mode = "peripheral";
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c_3 {
|
||
|
|
samsung,i2c-sda-delay = <100>;
|
||
|
|
samsung,i2c-slave-addr = <0x10>;
|
||
|
|
samsung,i2c-max-bus-freq = <400000>;
|
||
|
|
pinctrl-0 = <&i2c3_bus>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
touchscreen@48 {
|
||
|
|
compatible = "melfas,mms114";
|
||
|
|
reg = <0x48>;
|
||
|
|
interrupt-parent = <&gpx0>;
|
||
|
|
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
|
||
|
|
touchscreen-size-x = <720>;
|
||
|
|
touchscreen-size-y = <1280>;
|
||
|
|
avdd-supply = <&tsp_reg>;
|
||
|
|
vdd-supply = <&tsp_reg>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c_5 {
|
||
|
|
samsung,i2c-sda-delay = <100>;
|
||
|
|
samsung,i2c-slave-addr = <0x10>;
|
||
|
|
samsung,i2c-max-bus-freq = <100000>;
|
||
|
|
pinctrl-0 = <&i2c5_bus>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
pmic@66 {
|
||
|
|
compatible = "maxim,max8997-pmic";
|
||
|
|
|
||
|
|
reg = <0x66>;
|
||
|
|
interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>,
|
||
|
|
<&gpx2 3 IRQ_TYPE_EDGE_FALLING>;
|
||
|
|
|
||
|
|
max8997,pmic-buck1-uses-gpio-dvs;
|
||
|
|
max8997,pmic-buck2-uses-gpio-dvs;
|
||
|
|
max8997,pmic-buck5-uses-gpio-dvs;
|
||
|
|
|
||
|
|
max8997,pmic-ignore-gpiodvs-side-effect;
|
||
|
|
max8997,pmic-buck125-default-dvs-idx = <0>;
|
||
|
|
|
||
|
|
max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
|
||
|
|
<&gpx0 6 GPIO_ACTIVE_HIGH>,
|
||
|
|
<&gpl0 0 GPIO_ACTIVE_HIGH>;
|
||
|
|
|
||
|
|
max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
|
||
|
|
<1250000>, <1200000>,
|
||
|
|
<1150000>, <1100000>,
|
||
|
|
<1000000>, <950000>;
|
||
|
|
|
||
|
|
max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
|
||
|
|
<950000>, <900000>,
|
||
|
|
<1100000>, <1000000>,
|
||
|
|
<950000>, <900000>;
|
||
|
|
|
||
|
|
max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
|
||
|
|
<1200000>, <1200000>,
|
||
|
|
<1200000>, <1200000>,
|
||
|
|
<1200000>, <1200000>;
|
||
|
|
|
||
|
|
regulators {
|
||
|
|
valive_reg: LDO2 {
|
||
|
|
regulator-name = "VALIVE_1.1V_C210";
|
||
|
|
regulator-min-microvolt = <1100000>;
|
||
|
|
regulator-max-microvolt = <1100000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vusb_reg: LDO3 {
|
||
|
|
regulator-name = "VUSB_1.1V_C210";
|
||
|
|
regulator-min-microvolt = <1100000>;
|
||
|
|
regulator-max-microvolt = <1100000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vmipi_reg: LDO4 {
|
||
|
|
regulator-name = "VMIPI_1.8V";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vpda_reg: LDO6 {
|
||
|
|
regulator-name = "VCC_1.8V_PDA";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vcam_reg: LDO7 {
|
||
|
|
regulator-name = "CAM_ISP_1.8V";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vusbdac_reg: LDO8 {
|
||
|
|
regulator-name = "VUSB+VDAC_3.3V_C210";
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vccpda_reg: LDO9 {
|
||
|
|
regulator-name = "VCC_2.8V_PDA";
|
||
|
|
regulator-min-microvolt = <2800000>;
|
||
|
|
regulator-max-microvolt = <2800000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vpll_reg: LDO10 {
|
||
|
|
regulator-name = "VPLL_1.1V_C210";
|
||
|
|
regulator-min-microvolt = <1100000>;
|
||
|
|
regulator-max-microvolt = <1100000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vtcam_reg: LDO12 {
|
||
|
|
regulator-name = "VT_CAM_1.8V";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vcclcd_reg: LDO13 {
|
||
|
|
regulator-name = "VCC_3.3V_LCD";
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vlcd_reg: LDO15 {
|
||
|
|
regulator-name = "VLCD_2.2V";
|
||
|
|
regulator-min-microvolt = <2200000>;
|
||
|
|
regulator-max-microvolt = <2200000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
camsensor_reg: LDO16 {
|
||
|
|
regulator-name = "CAM_SENSOR_IO_1.8V";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
tflash_reg: LDO17 {
|
||
|
|
regulator-name = "VTF_2.8V";
|
||
|
|
regulator-min-microvolt = <2800000>;
|
||
|
|
regulator-max-microvolt = <2800000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vddq_reg: LDO21 {
|
||
|
|
regulator-name = "VDDQ_M1M2_1.2V";
|
||
|
|
regulator-min-microvolt = <1200000>;
|
||
|
|
regulator-max-microvolt = <1200000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
varm_breg: BUCK1 {
|
||
|
|
regulator-name = "VARM_1.2V_C210";
|
||
|
|
regulator-min-microvolt = <900000>;
|
||
|
|
regulator-max-microvolt = <1350000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vint_breg: BUCK2 {
|
||
|
|
regulator-name = "VINT_1.1V_C210";
|
||
|
|
regulator-min-microvolt = <900000>;
|
||
|
|
regulator-max-microvolt = <1100000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
camisp_breg: BUCK4 {
|
||
|
|
regulator-name = "CAM_ISP_CORE_1.2V";
|
||
|
|
regulator-min-microvolt = <1200000>;
|
||
|
|
regulator-max-microvolt = <1200000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vmem_breg: BUCK5 {
|
||
|
|
regulator-name = "VMEM_1.2V_C210";
|
||
|
|
regulator-min-microvolt = <1200000>;
|
||
|
|
regulator-max-microvolt = <1200000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vccsub_breg: BUCK7 {
|
||
|
|
regulator-name = "VCC_SUB_2.0V";
|
||
|
|
regulator-min-microvolt = <2000000>;
|
||
|
|
regulator-max-microvolt = <2000000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
safe1_sreg: ESAFEOUT1 {
|
||
|
|
regulator-name = "SAFEOUT1";
|
||
|
|
};
|
||
|
|
|
||
|
|
safe2_sreg: ESAFEOUT2 {
|
||
|
|
regulator-name = "SAFEOUT2";
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
EN32KHZ_AP {
|
||
|
|
regulator-name = "EN32KHZ_AP";
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
EN32KHZ_CP {
|
||
|
|
regulator-name = "EN32KHZ_CP";
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pinctrl_1 {
|
||
|
|
bt_shutdown: bt-shutdown-pins {
|
||
|
|
samsung,pins = "gpl1-0";
|
||
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
|
||
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
||
|
|
};
|
||
|
|
|
||
|
|
bt_host_wakeup: bt-host-wakeup-pins {
|
||
|
|
samsung,pins = "gpx2-6";
|
||
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
|
||
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
||
|
|
};
|
||
|
|
|
||
|
|
bt_device_wakeup: bt-device-wakeup-pins {
|
||
|
|
samsung,pins = "gpx3-1";
|
||
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
|
||
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&rtc {
|
||
|
|
status = "okay";
|
||
|
|
clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
|
||
|
|
clock-names = "rtc", "rtc_src";
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdhci_0 {
|
||
|
|
bus-width = <8>;
|
||
|
|
non-removable;
|
||
|
|
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
vmmc-supply = <&vemmc_reg>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdhci_2 {
|
||
|
|
bus-width = <4>;
|
||
|
|
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
vmmc-supply = <&tflash_reg>;
|
||
|
|
cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdhci_3 {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
non-removable;
|
||
|
|
bus-width = <4>;
|
||
|
|
mmc-pwrseq = <&wlan_pwrseq>;
|
||
|
|
vmmc-supply = <&tflash_reg>;
|
||
|
|
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
|
||
|
|
|
||
|
|
brcmf: wifi@1 {
|
||
|
|
compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
|
||
|
|
reg = <1>;
|
||
|
|
|
||
|
|
interrupt-parent = <&gpx2>;
|
||
|
|
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
interrupt-names = "host-wake";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&serial_0 {
|
||
|
|
status = "okay";
|
||
|
|
pinctrl-0 = <&uart0_data &uart0_fctl>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
|
||
|
|
bluetooth {
|
||
|
|
compatible = "brcm,bcm4330-bt";
|
||
|
|
pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
shutdown-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
|
||
|
|
device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
|
||
|
|
host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&serial_1 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&serial_2 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&serial_3 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&tmu {
|
||
|
|
status = "okay";
|
||
|
|
};
|