192 lines
8.0 KiB
ReStructuredText
192 lines
8.0 KiB
ReStructuredText
|
=================
|
||
|
|
SPI userspace API
|
||
|
|
=================
|
||
|
|
|
||
|
|
SPI devices have a limited userspace API, supporting basic half-duplex
|
||
|
|
read() and write() access to SPI slave devices. Using ioctl() requests,
|
||
|
|
full duplex transfers and device I/O configuration are also available.
|
||
|
|
|
||
|
|
::
|
||
|
|
|
||
|
|
#include <fcntl.h>
|
||
|
|
#include <unistd.h>
|
||
|
|
#include <sys/ioctl.h>
|
||
|
|
#include <linux/types.h>
|
||
|
|
#include <linux/spi/spidev.h>
|
||
|
|
|
||
|
|
Some reasons you might want to use this programming interface include:
|
||
|
|
|
||
|
|
* Prototyping in an environment that's not crash-prone; stray pointers
|
||
|
|
in userspace won't normally bring down any Linux system.
|
||
|
|
|
||
|
|
* Developing simple protocols used to talk to microcontrollers acting
|
||
|
|
as SPI slaves, which you may need to change quite often.
|
||
|
|
|
||
|
|
Of course there are drivers that can never be written in userspace, because
|
||
|
|
they need to access kernel interfaces (such as IRQ handlers or other layers
|
||
|
|
of the driver stack) that are not accessible to userspace.
|
||
|
|
|
||
|
|
|
||
|
|
DEVICE CREATION, DRIVER BINDING
|
||
|
|
===============================
|
||
|
|
|
||
|
|
The spidev driver contains lists of SPI devices that are supported for
|
||
|
|
the different hardware topology representations.
|
||
|
|
|
||
|
|
The following are the SPI device tables supported by the spidev driver:
|
||
|
|
|
||
|
|
- struct spi_device_id spidev_spi_ids[]: list of devices that can be
|
||
|
|
bound when these are defined using a struct spi_board_info with a
|
||
|
|
.modalias field matching one of the entries in the table.
|
||
|
|
|
||
|
|
- struct of_device_id spidev_dt_ids[]: list of devices that can be
|
||
|
|
bound when these are defined using a Device Tree node that has a
|
||
|
|
compatible string matching one of the entries in the table.
|
||
|
|
|
||
|
|
- struct acpi_device_id spidev_acpi_ids[]: list of devices that can
|
||
|
|
be bound when these are defined using a ACPI device object with a
|
||
|
|
_HID matching one of the entries in the table.
|
||
|
|
|
||
|
|
You are encouraged to add an entry for your SPI device name to relevant
|
||
|
|
tables, if these don't already have an entry for the device. To do that,
|
||
|
|
post a patch for spidev to the linux-spi@vger.kernel.org mailing list.
|
||
|
|
|
||
|
|
It used to be supported to define an SPI device using the "spidev" name.
|
||
|
|
For example, as .modalias = "spidev" or compatible = "spidev". But this
|
||
|
|
is no longer supported by the Linux kernel and instead a real SPI device
|
||
|
|
name as listed in one of the tables must be used.
|
||
|
|
|
||
|
|
Not having a real SPI device name will lead to an error being printed and
|
||
|
|
the spidev driver failing to probe.
|
||
|
|
|
||
|
|
Sysfs also supports userspace driven binding/unbinding of drivers to
|
||
|
|
devices that do not bind automatically using one of the tables above.
|
||
|
|
To make the spidev driver bind to such a device, use the following:
|
||
|
|
|
||
|
|
echo spidev > /sys/bus/spi/devices/spiB.C/driver_override
|
||
|
|
echo spiB.C > /sys/bus/spi/drivers/spidev/bind
|
||
|
|
|
||
|
|
When the spidev driver is bound to a SPI device, the sysfs node for the
|
||
|
|
device will include a child device node with a "dev" attribute that will
|
||
|
|
be understood by udev or mdev (udev replacement from BusyBox; it's less
|
||
|
|
featureful, but often enough).
|
||
|
|
|
||
|
|
For a SPI device with chipselect C on bus B, you should see:
|
||
|
|
|
||
|
|
/dev/spidevB.C ...
|
||
|
|
character special device, major number 153 with
|
||
|
|
a dynamically chosen minor device number. This is the node
|
||
|
|
that userspace programs will open, created by "udev" or "mdev".
|
||
|
|
|
||
|
|
/sys/devices/.../spiB.C ...
|
||
|
|
as usual, the SPI device node will
|
||
|
|
be a child of its SPI master controller.
|
||
|
|
|
||
|
|
/sys/class/spidev/spidevB.C ...
|
||
|
|
created when the "spidev" driver
|
||
|
|
binds to that device. (Directory or symlink, based on whether
|
||
|
|
or not you enabled the "deprecated sysfs files" Kconfig option.)
|
||
|
|
|
||
|
|
Do not try to manage the /dev character device special file nodes by hand.
|
||
|
|
That's error prone, and you'd need to pay careful attention to system
|
||
|
|
security issues; udev/mdev should already be configured securely.
|
||
|
|
|
||
|
|
If you unbind the "spidev" driver from that device, those two "spidev" nodes
|
||
|
|
(in sysfs and in /dev) should automatically be removed (respectively by the
|
||
|
|
kernel and by udev/mdev). You can unbind by removing the "spidev" driver
|
||
|
|
module, which will affect all devices using this driver. You can also unbind
|
||
|
|
by having kernel code remove the SPI device, probably by removing the driver
|
||
|
|
for its SPI controller (so its spi_master vanishes).
|
||
|
|
|
||
|
|
Since this is a standard Linux device driver -- even though it just happens
|
||
|
|
to expose a low level API to userspace -- it can be associated with any number
|
||
|
|
of devices at a time. Just provide one spi_board_info record for each such
|
||
|
|
SPI device, and you'll get a /dev device node for each device.
|
||
|
|
|
||
|
|
|
||
|
|
BASIC CHARACTER DEVICE API
|
||
|
|
==========================
|
||
|
|
Normal open() and close() operations on /dev/spidevB.D files work as you
|
||
|
|
would expect.
|
||
|
|
|
||
|
|
Standard read() and write() operations are obviously only half-duplex, and
|
||
|
|
the chipselect is deactivated between those operations. Full-duplex access,
|
||
|
|
and composite operation without chipselect de-activation, is available using
|
||
|
|
the SPI_IOC_MESSAGE(N) request.
|
||
|
|
|
||
|
|
Several ioctl() requests let your driver read or override the device's current
|
||
|
|
settings for data transfer parameters:
|
||
|
|
|
||
|
|
SPI_IOC_RD_MODE, SPI_IOC_WR_MODE ...
|
||
|
|
pass a pointer to a byte which will
|
||
|
|
return (RD) or assign (WR) the SPI transfer mode. Use the constants
|
||
|
|
SPI_MODE_0..SPI_MODE_3; or if you prefer you can combine SPI_CPOL
|
||
|
|
(clock polarity, idle high iff this is set) or SPI_CPHA (clock phase,
|
||
|
|
sample on trailing edge iff this is set) flags.
|
||
|
|
Note that this request is limited to SPI mode flags that fit in a
|
||
|
|
single byte.
|
||
|
|
|
||
|
|
SPI_IOC_RD_MODE32, SPI_IOC_WR_MODE32 ...
|
||
|
|
pass a pointer to a uin32_t
|
||
|
|
which will return (RD) or assign (WR) the full SPI transfer mode,
|
||
|
|
not limited to the bits that fit in one byte.
|
||
|
|
|
||
|
|
SPI_IOC_RD_LSB_FIRST, SPI_IOC_WR_LSB_FIRST ...
|
||
|
|
pass a pointer to a byte
|
||
|
|
which will return (RD) or assign (WR) the bit justification used to
|
||
|
|
transfer SPI words. Zero indicates MSB-first; other values indicate
|
||
|
|
the less common LSB-first encoding. In both cases the specified value
|
||
|
|
is right-justified in each word, so that unused (TX) or undefined (RX)
|
||
|
|
bits are in the MSBs.
|
||
|
|
|
||
|
|
SPI_IOC_RD_BITS_PER_WORD, SPI_IOC_WR_BITS_PER_WORD ...
|
||
|
|
pass a pointer to
|
||
|
|
a byte which will return (RD) or assign (WR) the number of bits in
|
||
|
|
each SPI transfer word. The value zero signifies eight bits.
|
||
|
|
|
||
|
|
SPI_IOC_RD_MAX_SPEED_HZ, SPI_IOC_WR_MAX_SPEED_HZ ...
|
||
|
|
pass a pointer to a
|
||
|
|
u32 which will return (RD) or assign (WR) the maximum SPI transfer
|
||
|
|
speed, in Hz. The controller can't necessarily assign that specific
|
||
|
|
clock speed.
|
||
|
|
|
||
|
|
NOTES:
|
||
|
|
|
||
|
|
- At this time there is no async I/O support; everything is purely
|
||
|
|
synchronous.
|
||
|
|
|
||
|
|
- There's currently no way to report the actual bit rate used to
|
||
|
|
shift data to/from a given device.
|
||
|
|
|
||
|
|
- From userspace, you can't currently change the chip select polarity;
|
||
|
|
that could corrupt transfers to other devices sharing the SPI bus.
|
||
|
|
Each SPI device is deselected when it's not in active use, allowing
|
||
|
|
other drivers to talk to other devices.
|
||
|
|
|
||
|
|
- There's a limit on the number of bytes each I/O request can transfer
|
||
|
|
to the SPI device. It defaults to one page, but that can be changed
|
||
|
|
using a module parameter.
|
||
|
|
|
||
|
|
- Because SPI has no low-level transfer acknowledgement, you usually
|
||
|
|
won't see any I/O errors when talking to a non-existent device.
|
||
|
|
|
||
|
|
|
||
|
|
FULL DUPLEX CHARACTER DEVICE API
|
||
|
|
================================
|
||
|
|
|
||
|
|
See the spidev_fdx.c sample program for one example showing the use of the
|
||
|
|
full duplex programming interface. (Although it doesn't perform a full duplex
|
||
|
|
transfer.) The model is the same as that used in the kernel spi_sync()
|
||
|
|
request; the individual transfers offer the same capabilities as are
|
||
|
|
available to kernel drivers (except that it's not asynchronous).
|
||
|
|
|
||
|
|
The example shows one half-duplex RPC-style request and response message.
|
||
|
|
These requests commonly require that the chip not be deselected between
|
||
|
|
the request and response. Several such requests could be chained into
|
||
|
|
a single kernel request, even allowing the chip to be deselected after
|
||
|
|
each response. (Other protocol options include changing the word size
|
||
|
|
and bitrate for each transfer segment.)
|
||
|
|
|
||
|
|
To make a full duplex request, provide both rx_buf and tx_buf for the
|
||
|
|
same transfer. It's even OK if those are the same buffer.
|