linux/linux-5.18.11/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts

395 lines
8.5 KiB
Plaintext
Raw Permalink Normal View History

2024-03-22 18:12:32 +00:00
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* MPC8641 HPCN Device Tree Source
*
* Copyright 2006 Freescale Semiconductor Inc.
*/
/include/ "mpc8641si-pre.dtsi"
/ {
model = "MPC8641HPCN";
compatible = "fsl,mpc8641hpcn";
memory {
device_type = "memory";
reg = <0x00000000 0x40000000>; // 1G at 0x0
};
lbc: localbus@ffe05000 {
reg = <0xffe05000 0x1000>;
ranges = <0 0 0xef800000 0x00800000
2 0 0xffdf8000 0x00008000
3 0 0xffdf0000 0x00008000>;
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0 0x00800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x00000000 0x00300000>;
};
partition@300000 {
label = "firmware b";
reg = <0x00300000 0x00100000>;
read-only;
};
partition@400000 {
label = "fs";
reg = <0x00400000 0x00300000>;
};
partition@700000 {
label = "firmware a";
reg = <0x00700000 0x00100000>;
read-only;
};
};
};
soc: soc8641@ffe00000 {
ranges = <0x00000000 0xffe00000 0x00100000>;
enet0: ethernet@24000 {
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
mdio@24520 {
phy0: ethernet-phy@0 {
interrupts = <10 1 0 0>;
reg = <0>;
};
phy1: ethernet-phy@1 {
interrupts = <10 1 0 0>;
reg = <1>;
};
phy2: ethernet-phy@2 {
interrupts = <10 1 0 0>;
reg = <2>;
};
phy3: ethernet-phy@3 {
interrupts = <10 1 0 0>;
reg = <3>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet1: ethernet@25000 {
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
mdio@25520 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet2: ethernet@26000 {
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
};
mdio@26520 {
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet3: ethernet@27000 {
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
};
mdio@27520 {
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
rmu: rmu@d3000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,srio-rmu";
reg = <0xd3000 0x500>;
ranges = <0x0 0xd3000 0x500>;
message-unit@0 {
compatible = "fsl,srio-msg-unit";
reg = <0x0 0x100>;
interrupts = <
53 2 0 0 /* msg1_tx_irq */
54 2 0 0>;/* msg1_rx_irq */
};
message-unit@100 {
compatible = "fsl,srio-msg-unit";
reg = <0x100 0x100>;
interrupts = <
55 2 0 0 /* msg2_tx_irq */
56 2 0 0>;/* msg2_rx_irq */
};
doorbell-unit@400 {
compatible = "fsl,srio-dbell-unit";
reg = <0x400 0x80>;
interrupts = <
49 2 0 0 /* bell_outb_irq */
50 2 0 0>;/* bell_inb_irq */
};
port-write-unit@4e0 {
compatible = "fsl,srio-port-write-unit";
reg = <0x4e0 0x20>;
interrupts = <48 2 0 0>;
};
};
};
pci0: pcie@ffe08000 {
reg = <0xffe08000 0x1000>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xffc00000 0x0 0x00010000>;
interrupt-map-mask = <0xff00 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 func 0 - PCI slot 1 */
0x8800 0 0 1 &mpic 2 1 0 0
0x8800 0 0 2 &mpic 3 1 0 0
0x8800 0 0 3 &mpic 4 1 0 0
0x8800 0 0 4 &mpic 1 1 0 0
/* IDSEL 0x11 func 1 - PCI slot 1 */
0x8900 0 0 1 &mpic 2 1 0 0
0x8900 0 0 2 &mpic 3 1 0 0
0x8900 0 0 3 &mpic 4 1 0 0
0x8900 0 0 4 &mpic 1 1 0 0
/* IDSEL 0x11 func 2 - PCI slot 1 */
0x8a00 0 0 1 &mpic 2 1 0 0
0x8a00 0 0 2 &mpic 3 1 0 0
0x8a00 0 0 3 &mpic 4 1 0 0
0x8a00 0 0 4 &mpic 1 1 0 0
/* IDSEL 0x11 func 3 - PCI slot 1 */
0x8b00 0 0 1 &mpic 2 1 0 0
0x8b00 0 0 2 &mpic 3 1 0 0
0x8b00 0 0 3 &mpic 4 1 0 0
0x8b00 0 0 4 &mpic 1 1 0 0
/* IDSEL 0x11 func 4 - PCI slot 1 */
0x8c00 0 0 1 &mpic 2 1 0 0
0x8c00 0 0 2 &mpic 3 1 0 0
0x8c00 0 0 3 &mpic 4 1 0 0
0x8c00 0 0 4 &mpic 1 1 0 0
/* IDSEL 0x11 func 5 - PCI slot 1 */
0x8d00 0 0 1 &mpic 2 1 0 0
0x8d00 0 0 2 &mpic 3 1 0 0
0x8d00 0 0 3 &mpic 4 1 0 0
0x8d00 0 0 4 &mpic 1 1 0 0
/* IDSEL 0x11 func 6 - PCI slot 1 */
0x8e00 0 0 1 &mpic 2 1 0 0
0x8e00 0 0 2 &mpic 3 1 0 0
0x8e00 0 0 3 &mpic 4 1 0 0
0x8e00 0 0 4 &mpic 1 1 0 0
/* IDSEL 0x11 func 7 - PCI slot 1 */
0x8f00 0 0 1 &mpic 2 1 0 0
0x8f00 0 0 2 &mpic 3 1 0 0
0x8f00 0 0 3 &mpic 4 1 0 0
0x8f00 0 0 4 &mpic 1 1 0 0
/* IDSEL 0x12 func 0 - PCI slot 2 */
0x9000 0 0 1 &mpic 3 1 0 0
0x9000 0 0 2 &mpic 4 1 0 0
0x9000 0 0 3 &mpic 1 1 0 0
0x9000 0 0 4 &mpic 2 1 0 0
/* IDSEL 0x12 func 1 - PCI slot 2 */
0x9100 0 0 1 &mpic 3 1 0 0
0x9100 0 0 2 &mpic 4 1 0 0
0x9100 0 0 3 &mpic 1 1 0 0
0x9100 0 0 4 &mpic 2 1 0 0
/* IDSEL 0x12 func 2 - PCI slot 2 */
0x9200 0 0 1 &mpic 3 1 0 0
0x9200 0 0 2 &mpic 4 1 0 0
0x9200 0 0 3 &mpic 1 1 0 0
0x9200 0 0 4 &mpic 2 1 0 0
/* IDSEL 0x12 func 3 - PCI slot 2 */
0x9300 0 0 1 &mpic 3 1 0 0
0x9300 0 0 2 &mpic 4 1 0 0
0x9300 0 0 3 &mpic 1 1 0 0
0x9300 0 0 4 &mpic 2 1 0 0
/* IDSEL 0x12 func 4 - PCI slot 2 */
0x9400 0 0 1 &mpic 3 1 0 0
0x9400 0 0 2 &mpic 4 1 0 0
0x9400 0 0 3 &mpic 1 1 0 0
0x9400 0 0 4 &mpic 2 1 0 0
/* IDSEL 0x12 func 5 - PCI slot 2 */
0x9500 0 0 1 &mpic 3 1 0 0
0x9500 0 0 2 &mpic 4 1 0 0
0x9500 0 0 3 &mpic 1 1 0 0
0x9500 0 0 4 &mpic 2 1 0 0
/* IDSEL 0x12 func 6 - PCI slot 2 */
0x9600 0 0 1 &mpic 3 1 0 0
0x9600 0 0 2 &mpic 4 1 0 0
0x9600 0 0 3 &mpic 1 1 0 0
0x9600 0 0 4 &mpic 2 1 0 0
/* IDSEL 0x12 func 7 - PCI slot 2 */
0x9700 0 0 1 &mpic 3 1 0 0
0x9700 0 0 2 &mpic 4 1 0 0
0x9700 0 0 3 &mpic 1 1 0 0
0x9700 0 0 4 &mpic 2 1 0 0
// IDSEL 0x1c USB
0xe000 0 0 1 &i8259 12 2
0xe100 0 0 2 &i8259 9 2
0xe200 0 0 3 &i8259 10 2
0xe300 0 0 4 &i8259 11 2
// IDSEL 0x1d Audio
0xe800 0 0 1 &i8259 6 2
// IDSEL 0x1e Legacy
0xf000 0 0 1 &i8259 7 2
0xf100 0 0 1 &i8259 7 2
// IDSEL 0x1f IDE/SATA
0xf800 0 0 1 &i8259 14 2
0xf900 0 0 1 &i8259 5 2
>;
pcie@0 {
ranges = <0x02000000 0x0 0x80000000
0x02000000 0x0 0x80000000
0x0 0x20000000
0x01000000 0x0 0x00000000
0x01000000 0x0 0x00000000
0x0 0x00010000>;
uli1575@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
ranges = <0x02000000 0x0 0x80000000
0x02000000 0x0 0x80000000
0x0 0x20000000
0x01000000 0x0 0x00000000
0x01000000 0x0 0x00000000
0x0 0x00010000>;
isa@1e {
device_type = "isa";
#size-cells = <1>;
#address-cells = <2>;
reg = <0xf000 0 0 0 0>;
ranges = <1 0 0x01000000 0 0
0x00001000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
reg = <1 0x20 2
1 0xa0 2
1 0x4d0 2>;
interrupt-controller;
device_type = "interrupt-controller";
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <9 2 0 0>;
};
i8042@60 {
#size-cells = <0>;
#address-cells = <1>;
reg = <1 0x60 1 1 0x64 1>;
interrupts = <1 3 12 3>;
interrupt-parent = <&i8259>;
keyboard@0 {
reg = <0>;
compatible = "pnpPNP,303";
};
mouse@1 {
reg = <1>;
compatible = "pnpPNP,f03";
};
};
rtc@70 {
compatible =
"pnpPNP,b00";
reg = <1 0x70 2>;
};
gpio@400 {
reg = <1 0x400 0x80>;
};
};
};
};
};
pci1: pcie@ffe09000 {
reg = <0xffe09000 0x1000>;
ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xffc10000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0x0 0xa0000000
0x02000000 0x0 0xa0000000
0x0 0x20000000
0x01000000 0x0 0x00000000
0x01000000 0x0 0x00000000
0x0 0x00010000>;
};
};
/*
* Only one of Rapid IO or PCI can be present due to HW limitations and
* due to the fact that the 2 now share address space in the new memory
* map. The most likely case is that we have PCI, so comment out the
* rapidio node. Leave it here for reference.
rapidio@ffec0000 {
reg = <0xffec0000 0x11000>;
compatible = "fsl,srio";
interrupts = <48 2 0 0>;
#address-cells = <2>;
#size-cells = <2>;
fsl,srio-rmu-handle = <&rmu>;
ranges;
port1 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <1>;
ranges = <0 0 0x80000000 0 0x20000000>;
};
};
*/
};
/include/ "mpc8641si-post.dtsi"