727 lines
19 KiB
C
727 lines
19 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/* $Date: 2006/04/28 19:20:06 $ $RCSfile: vsc7326.c,v $ $Revision: 1.19 $ */
|
|
|
|
/* Driver for Vitesse VSC7326 (Schaumburg) MAC */
|
|
|
|
#include "gmac.h"
|
|
#include "elmer0.h"
|
|
#include "vsc7326_reg.h"
|
|
|
|
/* Update fast changing statistics every 15 seconds */
|
|
#define STATS_TICK_SECS 15
|
|
/* 30 minutes for full statistics update */
|
|
#define MAJOR_UPDATE_TICKS (1800 / STATS_TICK_SECS)
|
|
|
|
/* The egress WM value 0x01a01fff should be used only when the
|
|
* interface is down (MAC port disabled). This is a workaround
|
|
* for disabling the T2/MAC flow-control. When the interface is
|
|
* enabled, the WM value should be set to 0x014a03F0.
|
|
*/
|
|
#define WM_DISABLE 0x01a01fff
|
|
#define WM_ENABLE 0x014a03F0
|
|
|
|
struct init_table {
|
|
u32 addr;
|
|
u32 data;
|
|
};
|
|
|
|
struct _cmac_instance {
|
|
u32 index;
|
|
u32 ticks;
|
|
};
|
|
|
|
#define INITBLOCK_SLEEP 0xffffffff
|
|
|
|
static void vsc_read(adapter_t *adapter, u32 addr, u32 *val)
|
|
{
|
|
u32 status, vlo, vhi;
|
|
int i;
|
|
|
|
spin_lock_bh(&adapter->mac_lock);
|
|
t1_tpi_read(adapter, (addr << 2) + 4, &vlo);
|
|
i = 0;
|
|
do {
|
|
t1_tpi_read(adapter, (REG_LOCAL_STATUS << 2) + 4, &vlo);
|
|
t1_tpi_read(adapter, REG_LOCAL_STATUS << 2, &vhi);
|
|
status = (vhi << 16) | vlo;
|
|
i++;
|
|
} while (((status & 1) == 0) && (i < 50));
|
|
if (i == 50)
|
|
pr_err("Invalid tpi read from MAC, breaking loop.\n");
|
|
|
|
t1_tpi_read(adapter, (REG_LOCAL_DATA << 2) + 4, &vlo);
|
|
t1_tpi_read(adapter, REG_LOCAL_DATA << 2, &vhi);
|
|
|
|
*val = (vhi << 16) | vlo;
|
|
|
|
/* pr_err("rd: block: 0x%x sublock: 0x%x reg: 0x%x data: 0x%x\n",
|
|
((addr&0xe000)>>13), ((addr&0x1e00)>>9),
|
|
((addr&0x01fe)>>1), *val); */
|
|
spin_unlock_bh(&adapter->mac_lock);
|
|
}
|
|
|
|
static void vsc_write(adapter_t *adapter, u32 addr, u32 data)
|
|
{
|
|
spin_lock_bh(&adapter->mac_lock);
|
|
t1_tpi_write(adapter, (addr << 2) + 4, data & 0xFFFF);
|
|
t1_tpi_write(adapter, addr << 2, (data >> 16) & 0xFFFF);
|
|
/* pr_err("wr: block: 0x%x sublock: 0x%x reg: 0x%x data: 0x%x\n",
|
|
((addr&0xe000)>>13), ((addr&0x1e00)>>9),
|
|
((addr&0x01fe)>>1), data); */
|
|
spin_unlock_bh(&adapter->mac_lock);
|
|
}
|
|
|
|
/* Hard reset the MAC. This wipes out *all* configuration. */
|
|
static void vsc7326_full_reset(adapter_t* adapter)
|
|
{
|
|
u32 val;
|
|
u32 result = 0xffff;
|
|
|
|
t1_tpi_read(adapter, A_ELMER0_GPO, &val);
|
|
val &= ~1;
|
|
t1_tpi_write(adapter, A_ELMER0_GPO, val);
|
|
udelay(2);
|
|
val |= 0x1; /* Enable mac MAC itself */
|
|
val |= 0x800; /* Turn off the red LED */
|
|
t1_tpi_write(adapter, A_ELMER0_GPO, val);
|
|
mdelay(1);
|
|
vsc_write(adapter, REG_SW_RESET, 0x80000001);
|
|
do {
|
|
mdelay(1);
|
|
vsc_read(adapter, REG_SW_RESET, &result);
|
|
} while (result != 0x0);
|
|
}
|
|
|
|
static struct init_table vsc7326_reset[] = {
|
|
{ REG_IFACE_MODE, 0x00000000 },
|
|
{ REG_CRC_CFG, 0x00000020 },
|
|
{ REG_PLL_CLK_SPEED, 0x00050c00 },
|
|
{ REG_PLL_CLK_SPEED, 0x00050c00 },
|
|
{ REG_MSCH, 0x00002f14 },
|
|
{ REG_SPI4_MISC, 0x00040409 },
|
|
{ REG_SPI4_DESKEW, 0x00080000 },
|
|
{ REG_SPI4_ING_SETUP2, 0x08080004 },
|
|
{ REG_SPI4_ING_SETUP0, 0x04111004 },
|
|
{ REG_SPI4_EGR_SETUP0, 0x80001a04 },
|
|
{ REG_SPI4_ING_SETUP1, 0x02010000 },
|
|
{ REG_AGE_INC(0), 0x00000000 },
|
|
{ REG_AGE_INC(1), 0x00000000 },
|
|
{ REG_ING_CONTROL, 0x0a200011 },
|
|
{ REG_EGR_CONTROL, 0xa0010091 },
|
|
};
|
|
|
|
static struct init_table vsc7326_portinit[4][22] = {
|
|
{ /* Port 0 */
|
|
/* FIFO setup */
|
|
{ REG_DBG(0), 0x000004f0 },
|
|
{ REG_HDX(0), 0x00073101 },
|
|
{ REG_TEST(0,0), 0x00000022 },
|
|
{ REG_TEST(1,0), 0x00000022 },
|
|
{ REG_TOP_BOTTOM(0,0), 0x003f0000 },
|
|
{ REG_TOP_BOTTOM(1,0), 0x00120000 },
|
|
{ REG_HIGH_LOW_WM(0,0), 0x07460757 },
|
|
{ REG_HIGH_LOW_WM(1,0), WM_DISABLE },
|
|
{ REG_CT_THRHLD(0,0), 0x00000000 },
|
|
{ REG_CT_THRHLD(1,0), 0x00000000 },
|
|
{ REG_BUCKE(0), 0x0002ffff },
|
|
{ REG_BUCKI(0), 0x0002ffff },
|
|
{ REG_TEST(0,0), 0x00000020 },
|
|
{ REG_TEST(1,0), 0x00000020 },
|
|
/* Port config */
|
|
{ REG_MAX_LEN(0), 0x00002710 },
|
|
{ REG_PORT_FAIL(0), 0x00000002 },
|
|
{ REG_NORMALIZER(0), 0x00000a64 },
|
|
{ REG_DENORM(0), 0x00000010 },
|
|
{ REG_STICK_BIT(0), 0x03baa370 },
|
|
{ REG_DEV_SETUP(0), 0x00000083 },
|
|
{ REG_DEV_SETUP(0), 0x00000082 },
|
|
{ REG_MODE_CFG(0), 0x0200259f },
|
|
},
|
|
{ /* Port 1 */
|
|
/* FIFO setup */
|
|
{ REG_DBG(1), 0x000004f0 },
|
|
{ REG_HDX(1), 0x00073101 },
|
|
{ REG_TEST(0,1), 0x00000022 },
|
|
{ REG_TEST(1,1), 0x00000022 },
|
|
{ REG_TOP_BOTTOM(0,1), 0x007e003f },
|
|
{ REG_TOP_BOTTOM(1,1), 0x00240012 },
|
|
{ REG_HIGH_LOW_WM(0,1), 0x07460757 },
|
|
{ REG_HIGH_LOW_WM(1,1), WM_DISABLE },
|
|
{ REG_CT_THRHLD(0,1), 0x00000000 },
|
|
{ REG_CT_THRHLD(1,1), 0x00000000 },
|
|
{ REG_BUCKE(1), 0x0002ffff },
|
|
{ REG_BUCKI(1), 0x0002ffff },
|
|
{ REG_TEST(0,1), 0x00000020 },
|
|
{ REG_TEST(1,1), 0x00000020 },
|
|
/* Port config */
|
|
{ REG_MAX_LEN(1), 0x00002710 },
|
|
{ REG_PORT_FAIL(1), 0x00000002 },
|
|
{ REG_NORMALIZER(1), 0x00000a64 },
|
|
{ REG_DENORM(1), 0x00000010 },
|
|
{ REG_STICK_BIT(1), 0x03baa370 },
|
|
{ REG_DEV_SETUP(1), 0x00000083 },
|
|
{ REG_DEV_SETUP(1), 0x00000082 },
|
|
{ REG_MODE_CFG(1), 0x0200259f },
|
|
},
|
|
{ /* Port 2 */
|
|
/* FIFO setup */
|
|
{ REG_DBG(2), 0x000004f0 },
|
|
{ REG_HDX(2), 0x00073101 },
|
|
{ REG_TEST(0,2), 0x00000022 },
|
|
{ REG_TEST(1,2), 0x00000022 },
|
|
{ REG_TOP_BOTTOM(0,2), 0x00bd007e },
|
|
{ REG_TOP_BOTTOM(1,2), 0x00360024 },
|
|
{ REG_HIGH_LOW_WM(0,2), 0x07460757 },
|
|
{ REG_HIGH_LOW_WM(1,2), WM_DISABLE },
|
|
{ REG_CT_THRHLD(0,2), 0x00000000 },
|
|
{ REG_CT_THRHLD(1,2), 0x00000000 },
|
|
{ REG_BUCKE(2), 0x0002ffff },
|
|
{ REG_BUCKI(2), 0x0002ffff },
|
|
{ REG_TEST(0,2), 0x00000020 },
|
|
{ REG_TEST(1,2), 0x00000020 },
|
|
/* Port config */
|
|
{ REG_MAX_LEN(2), 0x00002710 },
|
|
{ REG_PORT_FAIL(2), 0x00000002 },
|
|
{ REG_NORMALIZER(2), 0x00000a64 },
|
|
{ REG_DENORM(2), 0x00000010 },
|
|
{ REG_STICK_BIT(2), 0x03baa370 },
|
|
{ REG_DEV_SETUP(2), 0x00000083 },
|
|
{ REG_DEV_SETUP(2), 0x00000082 },
|
|
{ REG_MODE_CFG(2), 0x0200259f },
|
|
},
|
|
{ /* Port 3 */
|
|
/* FIFO setup */
|
|
{ REG_DBG(3), 0x000004f0 },
|
|
{ REG_HDX(3), 0x00073101 },
|
|
{ REG_TEST(0,3), 0x00000022 },
|
|
{ REG_TEST(1,3), 0x00000022 },
|
|
{ REG_TOP_BOTTOM(0,3), 0x00fc00bd },
|
|
{ REG_TOP_BOTTOM(1,3), 0x00480036 },
|
|
{ REG_HIGH_LOW_WM(0,3), 0x07460757 },
|
|
{ REG_HIGH_LOW_WM(1,3), WM_DISABLE },
|
|
{ REG_CT_THRHLD(0,3), 0x00000000 },
|
|
{ REG_CT_THRHLD(1,3), 0x00000000 },
|
|
{ REG_BUCKE(3), 0x0002ffff },
|
|
{ REG_BUCKI(3), 0x0002ffff },
|
|
{ REG_TEST(0,3), 0x00000020 },
|
|
{ REG_TEST(1,3), 0x00000020 },
|
|
/* Port config */
|
|
{ REG_MAX_LEN(3), 0x00002710 },
|
|
{ REG_PORT_FAIL(3), 0x00000002 },
|
|
{ REG_NORMALIZER(3), 0x00000a64 },
|
|
{ REG_DENORM(3), 0x00000010 },
|
|
{ REG_STICK_BIT(3), 0x03baa370 },
|
|
{ REG_DEV_SETUP(3), 0x00000083 },
|
|
{ REG_DEV_SETUP(3), 0x00000082 },
|
|
{ REG_MODE_CFG(3), 0x0200259f },
|
|
},
|
|
};
|
|
|
|
static void run_table(adapter_t *adapter, struct init_table *ib, int len)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
if (ib[i].addr == INITBLOCK_SLEEP) {
|
|
udelay( ib[i].data );
|
|
pr_err("sleep %d us\n",ib[i].data);
|
|
} else
|
|
vsc_write( adapter, ib[i].addr, ib[i].data );
|
|
}
|
|
}
|
|
|
|
static int bist_rd(adapter_t *adapter, int moduleid, int address)
|
|
{
|
|
int data = 0;
|
|
u32 result = 0;
|
|
|
|
if ((address != 0x0) &&
|
|
(address != 0x1) &&
|
|
(address != 0x2) &&
|
|
(address != 0xd) &&
|
|
(address != 0xe))
|
|
pr_err("No bist address: 0x%x\n", address);
|
|
|
|
data = ((0x00 << 24) | ((address & 0xff) << 16) | (0x00 << 8) |
|
|
((moduleid & 0xff) << 0));
|
|
vsc_write(adapter, REG_RAM_BIST_CMD, data);
|
|
|
|
udelay(10);
|
|
|
|
vsc_read(adapter, REG_RAM_BIST_RESULT, &result);
|
|
if ((result & (1 << 9)) != 0x0)
|
|
pr_err("Still in bist read: 0x%x\n", result);
|
|
else if ((result & (1 << 8)) != 0x0)
|
|
pr_err("bist read error: 0x%x\n", result);
|
|
|
|
return result & 0xff;
|
|
}
|
|
|
|
static int bist_wr(adapter_t *adapter, int moduleid, int address, int value)
|
|
{
|
|
int data = 0;
|
|
u32 result = 0;
|
|
|
|
if ((address != 0x0) &&
|
|
(address != 0x1) &&
|
|
(address != 0x2) &&
|
|
(address != 0xd) &&
|
|
(address != 0xe))
|
|
pr_err("No bist address: 0x%x\n", address);
|
|
|
|
if (value > 255)
|
|
pr_err("Suspicious write out of range value: 0x%x\n", value);
|
|
|
|
data = ((0x01 << 24) | ((address & 0xff) << 16) | (value << 8) |
|
|
((moduleid & 0xff) << 0));
|
|
vsc_write(adapter, REG_RAM_BIST_CMD, data);
|
|
|
|
udelay(5);
|
|
|
|
vsc_read(adapter, REG_RAM_BIST_CMD, &result);
|
|
if ((result & (1 << 27)) != 0x0)
|
|
pr_err("Still in bist write: 0x%x\n", result);
|
|
else if ((result & (1 << 26)) != 0x0)
|
|
pr_err("bist write error: 0x%x\n", result);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int run_bist(adapter_t *adapter, int moduleid)
|
|
{
|
|
/*run bist*/
|
|
(void) bist_wr(adapter,moduleid, 0x00, 0x02);
|
|
(void) bist_wr(adapter,moduleid, 0x01, 0x01);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int check_bist(adapter_t *adapter, int moduleid)
|
|
{
|
|
int result=0;
|
|
int column=0;
|
|
/*check bist*/
|
|
result = bist_rd(adapter,moduleid, 0x02);
|
|
column = ((bist_rd(adapter,moduleid, 0x0e)<<8) +
|
|
(bist_rd(adapter,moduleid, 0x0d)));
|
|
if ((result & 3) != 0x3)
|
|
pr_err("Result: 0x%x BIST error in ram %d, column: 0x%04x\n",
|
|
result, moduleid, column);
|
|
return 0;
|
|
}
|
|
|
|
static int enable_mem(adapter_t *adapter, int moduleid)
|
|
{
|
|
/*enable mem*/
|
|
(void) bist_wr(adapter,moduleid, 0x00, 0x00);
|
|
return 0;
|
|
}
|
|
|
|
static int run_bist_all(adapter_t *adapter)
|
|
{
|
|
int port = 0;
|
|
u32 val = 0;
|
|
|
|
vsc_write(adapter, REG_MEM_BIST, 0x5);
|
|
vsc_read(adapter, REG_MEM_BIST, &val);
|
|
|
|
for (port = 0; port < 12; port++)
|
|
vsc_write(adapter, REG_DEV_SETUP(port), 0x0);
|
|
|
|
udelay(300);
|
|
vsc_write(adapter, REG_SPI4_MISC, 0x00040409);
|
|
udelay(300);
|
|
|
|
(void) run_bist(adapter,13);
|
|
(void) run_bist(adapter,14);
|
|
(void) run_bist(adapter,20);
|
|
(void) run_bist(adapter,21);
|
|
mdelay(200);
|
|
(void) check_bist(adapter,13);
|
|
(void) check_bist(adapter,14);
|
|
(void) check_bist(adapter,20);
|
|
(void) check_bist(adapter,21);
|
|
udelay(100);
|
|
(void) enable_mem(adapter,13);
|
|
(void) enable_mem(adapter,14);
|
|
(void) enable_mem(adapter,20);
|
|
(void) enable_mem(adapter,21);
|
|
udelay(300);
|
|
vsc_write(adapter, REG_SPI4_MISC, 0x60040400);
|
|
udelay(300);
|
|
for (port = 0; port < 12; port++)
|
|
vsc_write(adapter, REG_DEV_SETUP(port), 0x1);
|
|
|
|
udelay(300);
|
|
vsc_write(adapter, REG_MEM_BIST, 0x0);
|
|
mdelay(10);
|
|
return 0;
|
|
}
|
|
|
|
static int mac_intr_handler(struct cmac *mac)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int mac_intr_enable(struct cmac *mac)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int mac_intr_disable(struct cmac *mac)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int mac_intr_clear(struct cmac *mac)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/* Expect MAC address to be in network byte order. */
|
|
static int mac_set_address(struct cmac* mac, u8 addr[6])
|
|
{
|
|
u32 val;
|
|
int port = mac->instance->index;
|
|
|
|
vsc_write(mac->adapter, REG_MAC_LOW_ADDR(port),
|
|
(addr[3] << 16) | (addr[4] << 8) | addr[5]);
|
|
vsc_write(mac->adapter, REG_MAC_HIGH_ADDR(port),
|
|
(addr[0] << 16) | (addr[1] << 8) | addr[2]);
|
|
|
|
vsc_read(mac->adapter, REG_ING_FFILT_UM_EN, &val);
|
|
val &= ~0xf0000000;
|
|
vsc_write(mac->adapter, REG_ING_FFILT_UM_EN, val | (port << 28));
|
|
|
|
vsc_write(mac->adapter, REG_ING_FFILT_MASK0,
|
|
0xffff0000 | (addr[4] << 8) | addr[5]);
|
|
vsc_write(mac->adapter, REG_ING_FFILT_MASK1,
|
|
0xffff0000 | (addr[2] << 8) | addr[3]);
|
|
vsc_write(mac->adapter, REG_ING_FFILT_MASK2,
|
|
0xffff0000 | (addr[0] << 8) | addr[1]);
|
|
return 0;
|
|
}
|
|
|
|
static int mac_get_address(struct cmac *mac, u8 addr[6])
|
|
{
|
|
u32 addr_lo, addr_hi;
|
|
int port = mac->instance->index;
|
|
|
|
vsc_read(mac->adapter, REG_MAC_LOW_ADDR(port), &addr_lo);
|
|
vsc_read(mac->adapter, REG_MAC_HIGH_ADDR(port), &addr_hi);
|
|
|
|
addr[0] = (u8) (addr_hi >> 16);
|
|
addr[1] = (u8) (addr_hi >> 8);
|
|
addr[2] = (u8) addr_hi;
|
|
addr[3] = (u8) (addr_lo >> 16);
|
|
addr[4] = (u8) (addr_lo >> 8);
|
|
addr[5] = (u8) addr_lo;
|
|
return 0;
|
|
}
|
|
|
|
/* This is intended to reset a port, not the whole MAC */
|
|
static int mac_reset(struct cmac *mac)
|
|
{
|
|
int index = mac->instance->index;
|
|
|
|
run_table(mac->adapter, vsc7326_portinit[index],
|
|
ARRAY_SIZE(vsc7326_portinit[index]));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mac_set_rx_mode(struct cmac *mac, struct t1_rx_mode *rm)
|
|
{
|
|
u32 v;
|
|
int port = mac->instance->index;
|
|
|
|
vsc_read(mac->adapter, REG_ING_FFILT_UM_EN, &v);
|
|
v |= 1 << 12;
|
|
|
|
if (t1_rx_mode_promisc(rm))
|
|
v &= ~(1 << (port + 16));
|
|
else
|
|
v |= 1 << (port + 16);
|
|
|
|
vsc_write(mac->adapter, REG_ING_FFILT_UM_EN, v);
|
|
return 0;
|
|
}
|
|
|
|
static int mac_set_mtu(struct cmac *mac, int mtu)
|
|
{
|
|
int port = mac->instance->index;
|
|
|
|
/* max_len includes header and FCS */
|
|
vsc_write(mac->adapter, REG_MAX_LEN(port), mtu + 14 + 4);
|
|
return 0;
|
|
}
|
|
|
|
static int mac_set_speed_duplex_fc(struct cmac *mac, int speed, int duplex,
|
|
int fc)
|
|
{
|
|
u32 v;
|
|
int enable, port = mac->instance->index;
|
|
|
|
if (speed >= 0 && speed != SPEED_10 && speed != SPEED_100 &&
|
|
speed != SPEED_1000)
|
|
return -1;
|
|
if (duplex > 0 && duplex != DUPLEX_FULL)
|
|
return -1;
|
|
|
|
if (speed >= 0) {
|
|
vsc_read(mac->adapter, REG_MODE_CFG(port), &v);
|
|
enable = v & 3; /* save tx/rx enables */
|
|
v &= ~0xf;
|
|
v |= 4; /* full duplex */
|
|
if (speed == SPEED_1000)
|
|
v |= 8; /* GigE */
|
|
enable |= v;
|
|
vsc_write(mac->adapter, REG_MODE_CFG(port), v);
|
|
|
|
if (speed == SPEED_1000)
|
|
v = 0x82;
|
|
else if (speed == SPEED_100)
|
|
v = 0x84;
|
|
else /* SPEED_10 */
|
|
v = 0x86;
|
|
vsc_write(mac->adapter, REG_DEV_SETUP(port), v | 1); /* reset */
|
|
vsc_write(mac->adapter, REG_DEV_SETUP(port), v);
|
|
vsc_read(mac->adapter, REG_DBG(port), &v);
|
|
v &= ~0xff00;
|
|
if (speed == SPEED_1000)
|
|
v |= 0x400;
|
|
else if (speed == SPEED_100)
|
|
v |= 0x2000;
|
|
else /* SPEED_10 */
|
|
v |= 0xff00;
|
|
vsc_write(mac->adapter, REG_DBG(port), v);
|
|
|
|
vsc_write(mac->adapter, REG_TX_IFG(port),
|
|
speed == SPEED_1000 ? 5 : 0x11);
|
|
if (duplex == DUPLEX_HALF)
|
|
enable = 0x0; /* 100 or 10 */
|
|
else if (speed == SPEED_1000)
|
|
enable = 0xc;
|
|
else /* SPEED_100 or 10 */
|
|
enable = 0x4;
|
|
enable |= 0x9 << 10; /* IFG1 */
|
|
enable |= 0x6 << 6; /* IFG2 */
|
|
enable |= 0x1 << 4; /* VLAN */
|
|
enable |= 0x3; /* RX/TX EN */
|
|
vsc_write(mac->adapter, REG_MODE_CFG(port), enable);
|
|
|
|
}
|
|
|
|
vsc_read(mac->adapter, REG_PAUSE_CFG(port), &v);
|
|
v &= 0xfff0ffff;
|
|
v |= 0x20000; /* xon/xoff */
|
|
if (fc & PAUSE_RX)
|
|
v |= 0x40000;
|
|
if (fc & PAUSE_TX)
|
|
v |= 0x80000;
|
|
if (fc == (PAUSE_RX | PAUSE_TX))
|
|
v |= 0x10000;
|
|
vsc_write(mac->adapter, REG_PAUSE_CFG(port), v);
|
|
return 0;
|
|
}
|
|
|
|
static int mac_enable(struct cmac *mac, int which)
|
|
{
|
|
u32 val;
|
|
int port = mac->instance->index;
|
|
|
|
/* Write the correct WM value when the port is enabled. */
|
|
vsc_write(mac->adapter, REG_HIGH_LOW_WM(1,port), WM_ENABLE);
|
|
|
|
vsc_read(mac->adapter, REG_MODE_CFG(port), &val);
|
|
if (which & MAC_DIRECTION_RX)
|
|
val |= 0x2;
|
|
if (which & MAC_DIRECTION_TX)
|
|
val |= 1;
|
|
vsc_write(mac->adapter, REG_MODE_CFG(port), val);
|
|
return 0;
|
|
}
|
|
|
|
static int mac_disable(struct cmac *mac, int which)
|
|
{
|
|
u32 val;
|
|
int i, port = mac->instance->index;
|
|
|
|
/* Reset the port, this also writes the correct WM value */
|
|
mac_reset(mac);
|
|
|
|
vsc_read(mac->adapter, REG_MODE_CFG(port), &val);
|
|
if (which & MAC_DIRECTION_RX)
|
|
val &= ~0x2;
|
|
if (which & MAC_DIRECTION_TX)
|
|
val &= ~0x1;
|
|
vsc_write(mac->adapter, REG_MODE_CFG(port), val);
|
|
vsc_read(mac->adapter, REG_MODE_CFG(port), &val);
|
|
|
|
/* Clear stats */
|
|
for (i = 0; i <= 0x3a; ++i)
|
|
vsc_write(mac->adapter, CRA(4, port, i), 0);
|
|
|
|
/* Clear software counters */
|
|
memset(&mac->stats, 0, sizeof(struct cmac_statistics));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rmon_update(struct cmac *mac, unsigned int addr, u64 *stat)
|
|
{
|
|
u32 v, lo;
|
|
|
|
vsc_read(mac->adapter, addr, &v);
|
|
lo = *stat;
|
|
*stat = *stat - lo + v;
|
|
|
|
if (v == 0)
|
|
return;
|
|
|
|
if (v < lo)
|
|
*stat += (1ULL << 32);
|
|
}
|
|
|
|
static void port_stats_update(struct cmac *mac)
|
|
{
|
|
struct {
|
|
unsigned int reg;
|
|
unsigned int offset;
|
|
} hw_stats[] = {
|
|
|
|
#define HW_STAT(reg, stat_name) \
|
|
{ reg, (&((struct cmac_statistics *)NULL)->stat_name) - (u64 *)NULL }
|
|
|
|
/* Rx stats */
|
|
HW_STAT(RxUnicast, RxUnicastFramesOK),
|
|
HW_STAT(RxMulticast, RxMulticastFramesOK),
|
|
HW_STAT(RxBroadcast, RxBroadcastFramesOK),
|
|
HW_STAT(Crc, RxFCSErrors),
|
|
HW_STAT(RxAlignment, RxAlignErrors),
|
|
HW_STAT(RxOversize, RxFrameTooLongErrors),
|
|
HW_STAT(RxPause, RxPauseFrames),
|
|
HW_STAT(RxJabbers, RxJabberErrors),
|
|
HW_STAT(RxFragments, RxRuntErrors),
|
|
HW_STAT(RxUndersize, RxRuntErrors),
|
|
HW_STAT(RxSymbolCarrier, RxSymbolErrors),
|
|
HW_STAT(RxSize1519ToMax, RxJumboFramesOK),
|
|
|
|
/* Tx stats (skip collision stats as we are full-duplex only) */
|
|
HW_STAT(TxUnicast, TxUnicastFramesOK),
|
|
HW_STAT(TxMulticast, TxMulticastFramesOK),
|
|
HW_STAT(TxBroadcast, TxBroadcastFramesOK),
|
|
HW_STAT(TxPause, TxPauseFrames),
|
|
HW_STAT(TxUnderrun, TxUnderrun),
|
|
HW_STAT(TxSize1519ToMax, TxJumboFramesOK),
|
|
}, *p = hw_stats;
|
|
unsigned int port = mac->instance->index;
|
|
u64 *stats = (u64 *)&mac->stats;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(hw_stats); i++)
|
|
rmon_update(mac, CRA(0x4, port, p->reg), stats + p->offset);
|
|
|
|
rmon_update(mac, REG_TX_OK_BYTES(port), &mac->stats.TxOctetsOK);
|
|
rmon_update(mac, REG_RX_OK_BYTES(port), &mac->stats.RxOctetsOK);
|
|
rmon_update(mac, REG_RX_BAD_BYTES(port), &mac->stats.RxOctetsBad);
|
|
}
|
|
|
|
/*
|
|
* This function is called periodically to accumulate the current values of the
|
|
* RMON counters into the port statistics. Since the counters are only 32 bits
|
|
* some of them can overflow in less than a minute at GigE speeds, so this
|
|
* function should be called every 30 seconds or so.
|
|
*
|
|
* To cut down on reading costs we update only the octet counters at each tick
|
|
* and do a full update at major ticks, which can be every 30 minutes or more.
|
|
*/
|
|
static const struct cmac_statistics *mac_update_statistics(struct cmac *mac,
|
|
int flag)
|
|
{
|
|
if (flag == MAC_STATS_UPDATE_FULL ||
|
|
mac->instance->ticks >= MAJOR_UPDATE_TICKS) {
|
|
port_stats_update(mac);
|
|
mac->instance->ticks = 0;
|
|
} else {
|
|
int port = mac->instance->index;
|
|
|
|
rmon_update(mac, REG_RX_OK_BYTES(port),
|
|
&mac->stats.RxOctetsOK);
|
|
rmon_update(mac, REG_RX_BAD_BYTES(port),
|
|
&mac->stats.RxOctetsBad);
|
|
rmon_update(mac, REG_TX_OK_BYTES(port),
|
|
&mac->stats.TxOctetsOK);
|
|
mac->instance->ticks++;
|
|
}
|
|
return &mac->stats;
|
|
}
|
|
|
|
static void mac_destroy(struct cmac *mac)
|
|
{
|
|
kfree(mac);
|
|
}
|
|
|
|
static const struct cmac_ops vsc7326_ops = {
|
|
.destroy = mac_destroy,
|
|
.reset = mac_reset,
|
|
.interrupt_handler = mac_intr_handler,
|
|
.interrupt_enable = mac_intr_enable,
|
|
.interrupt_disable = mac_intr_disable,
|
|
.interrupt_clear = mac_intr_clear,
|
|
.enable = mac_enable,
|
|
.disable = mac_disable,
|
|
.set_mtu = mac_set_mtu,
|
|
.set_rx_mode = mac_set_rx_mode,
|
|
.set_speed_duplex_fc = mac_set_speed_duplex_fc,
|
|
.statistics_update = mac_update_statistics,
|
|
.macaddress_get = mac_get_address,
|
|
.macaddress_set = mac_set_address,
|
|
};
|
|
|
|
static struct cmac *vsc7326_mac_create(adapter_t *adapter, int index)
|
|
{
|
|
struct cmac *mac;
|
|
u32 val;
|
|
int i;
|
|
|
|
mac = kzalloc(sizeof(*mac) + sizeof(cmac_instance), GFP_KERNEL);
|
|
if (!mac)
|
|
return NULL;
|
|
|
|
mac->ops = &vsc7326_ops;
|
|
mac->instance = (cmac_instance *)(mac + 1);
|
|
mac->adapter = adapter;
|
|
|
|
mac->instance->index = index;
|
|
mac->instance->ticks = 0;
|
|
|
|
i = 0;
|
|
do {
|
|
u32 vhi, vlo;
|
|
|
|
vhi = vlo = 0;
|
|
t1_tpi_read(adapter, (REG_LOCAL_STATUS << 2) + 4, &vlo);
|
|
udelay(1);
|
|
t1_tpi_read(adapter, REG_LOCAL_STATUS << 2, &vhi);
|
|
udelay(5);
|
|
val = (vhi << 16) | vlo;
|
|
} while ((++i < 10000) && (val == 0xffffffff));
|
|
|
|
return mac;
|
|
}
|
|
|
|
static int vsc7326_mac_reset(adapter_t *adapter)
|
|
{
|
|
vsc7326_full_reset(adapter);
|
|
(void) run_bist_all(adapter);
|
|
run_table(adapter, vsc7326_reset, ARRAY_SIZE(vsc7326_reset));
|
|
return 0;
|
|
}
|
|
|
|
const struct gmac t1_vsc7326_ops = {
|
|
.stats_update_period = STATS_TICK_SECS,
|
|
.create = vsc7326_mac_create,
|
|
.reset = vsc7326_mac_reset,
|
|
};
|