907 lines
21 KiB
C
907 lines
21 KiB
C
/* SocketCAN driver for Microchip CAN BUS Analyzer Tool
|
|
*
|
|
* Copyright (C) 2017 Mobica Limited
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published
|
|
* by the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program.
|
|
*
|
|
* This driver is inspired by the 4.6.2 version of net/can/usb/usb_8dev.c
|
|
*/
|
|
|
|
#include <asm/unaligned.h>
|
|
#include <linux/can.h>
|
|
#include <linux/can/dev.h>
|
|
#include <linux/can/error.h>
|
|
#include <linux/can/led.h>
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/usb.h>
|
|
|
|
/* vendor and product id */
|
|
#define MCBA_MODULE_NAME "mcba_usb"
|
|
#define MCBA_VENDOR_ID 0x04d8
|
|
#define MCBA_PRODUCT_ID 0x0a30
|
|
|
|
/* driver constants */
|
|
#define MCBA_MAX_RX_URBS 20
|
|
#define MCBA_MAX_TX_URBS 20
|
|
#define MCBA_CTX_FREE MCBA_MAX_TX_URBS
|
|
|
|
/* RX buffer must be bigger than msg size since at the
|
|
* beggining USB messages are stacked.
|
|
*/
|
|
#define MCBA_USB_RX_BUFF_SIZE 64
|
|
#define MCBA_USB_TX_BUFF_SIZE (sizeof(struct mcba_usb_msg))
|
|
|
|
/* MCBA endpoint numbers */
|
|
#define MCBA_USB_EP_IN 1
|
|
#define MCBA_USB_EP_OUT 1
|
|
|
|
/* Microchip command id */
|
|
#define MBCA_CMD_RECEIVE_MESSAGE 0xE3
|
|
#define MBCA_CMD_I_AM_ALIVE_FROM_CAN 0xF5
|
|
#define MBCA_CMD_I_AM_ALIVE_FROM_USB 0xF7
|
|
#define MBCA_CMD_CHANGE_BIT_RATE 0xA1
|
|
#define MBCA_CMD_TRANSMIT_MESSAGE_EV 0xA3
|
|
#define MBCA_CMD_SETUP_TERMINATION_RESISTANCE 0xA8
|
|
#define MBCA_CMD_READ_FW_VERSION 0xA9
|
|
#define MBCA_CMD_NOTHING_TO_SEND 0xFF
|
|
#define MBCA_CMD_TRANSMIT_MESSAGE_RSP 0xE2
|
|
|
|
#define MCBA_VER_REQ_USB 1
|
|
#define MCBA_VER_REQ_CAN 2
|
|
|
|
#define MCBA_SIDL_EXID_MASK 0x8
|
|
#define MCBA_DLC_MASK 0xf
|
|
#define MCBA_DLC_RTR_MASK 0x40
|
|
|
|
#define MCBA_CAN_STATE_WRN_TH 95
|
|
#define MCBA_CAN_STATE_ERR_PSV_TH 127
|
|
|
|
#define MCBA_TERMINATION_DISABLED CAN_TERMINATION_DISABLED
|
|
#define MCBA_TERMINATION_ENABLED 120
|
|
|
|
struct mcba_usb_ctx {
|
|
struct mcba_priv *priv;
|
|
u32 ndx;
|
|
u8 dlc;
|
|
bool can;
|
|
};
|
|
|
|
/* Structure to hold all of our device specific stuff */
|
|
struct mcba_priv {
|
|
struct can_priv can; /* must be the first member */
|
|
struct sk_buff *echo_skb[MCBA_MAX_TX_URBS];
|
|
struct mcba_usb_ctx tx_context[MCBA_MAX_TX_URBS];
|
|
struct usb_device *udev;
|
|
struct net_device *netdev;
|
|
struct usb_anchor tx_submitted;
|
|
struct usb_anchor rx_submitted;
|
|
struct can_berr_counter bec;
|
|
bool usb_ka_first_pass;
|
|
bool can_ka_first_pass;
|
|
bool can_speed_check;
|
|
atomic_t free_ctx_cnt;
|
|
};
|
|
|
|
/* CAN frame */
|
|
struct __packed mcba_usb_msg_can {
|
|
u8 cmd_id;
|
|
__be16 eid;
|
|
__be16 sid;
|
|
u8 dlc;
|
|
u8 data[8];
|
|
u8 timestamp[4];
|
|
u8 checksum;
|
|
};
|
|
|
|
/* command frame */
|
|
struct __packed mcba_usb_msg {
|
|
u8 cmd_id;
|
|
u8 unused[18];
|
|
};
|
|
|
|
struct __packed mcba_usb_msg_ka_usb {
|
|
u8 cmd_id;
|
|
u8 termination_state;
|
|
u8 soft_ver_major;
|
|
u8 soft_ver_minor;
|
|
u8 unused[15];
|
|
};
|
|
|
|
struct __packed mcba_usb_msg_ka_can {
|
|
u8 cmd_id;
|
|
u8 tx_err_cnt;
|
|
u8 rx_err_cnt;
|
|
u8 rx_buff_ovfl;
|
|
u8 tx_bus_off;
|
|
__be16 can_bitrate;
|
|
__le16 rx_lost;
|
|
u8 can_stat;
|
|
u8 soft_ver_major;
|
|
u8 soft_ver_minor;
|
|
u8 debug_mode;
|
|
u8 test_complete;
|
|
u8 test_result;
|
|
u8 unused[4];
|
|
};
|
|
|
|
struct __packed mcba_usb_msg_change_bitrate {
|
|
u8 cmd_id;
|
|
__be16 bitrate;
|
|
u8 unused[16];
|
|
};
|
|
|
|
struct __packed mcba_usb_msg_termination {
|
|
u8 cmd_id;
|
|
u8 termination;
|
|
u8 unused[17];
|
|
};
|
|
|
|
struct __packed mcba_usb_msg_fw_ver {
|
|
u8 cmd_id;
|
|
u8 pic;
|
|
u8 unused[17];
|
|
};
|
|
|
|
static const struct usb_device_id mcba_usb_table[] = {
|
|
{ USB_DEVICE(MCBA_VENDOR_ID, MCBA_PRODUCT_ID) },
|
|
{} /* Terminating entry */
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, mcba_usb_table);
|
|
|
|
static const u16 mcba_termination[] = { MCBA_TERMINATION_DISABLED,
|
|
MCBA_TERMINATION_ENABLED };
|
|
|
|
static const u32 mcba_bitrate[] = { 20000, 33333, 50000, 80000, 83333,
|
|
100000, 125000, 150000, 175000, 200000,
|
|
225000, 250000, 275000, 300000, 500000,
|
|
625000, 800000, 1000000 };
|
|
|
|
static inline void mcba_init_ctx(struct mcba_priv *priv)
|
|
{
|
|
int i = 0;
|
|
|
|
for (i = 0; i < MCBA_MAX_TX_URBS; i++) {
|
|
priv->tx_context[i].ndx = MCBA_CTX_FREE;
|
|
priv->tx_context[i].priv = priv;
|
|
}
|
|
|
|
atomic_set(&priv->free_ctx_cnt, ARRAY_SIZE(priv->tx_context));
|
|
}
|
|
|
|
static inline struct mcba_usb_ctx *mcba_usb_get_free_ctx(struct mcba_priv *priv,
|
|
struct can_frame *cf)
|
|
{
|
|
int i = 0;
|
|
struct mcba_usb_ctx *ctx = NULL;
|
|
|
|
for (i = 0; i < MCBA_MAX_TX_URBS; i++) {
|
|
if (priv->tx_context[i].ndx == MCBA_CTX_FREE) {
|
|
ctx = &priv->tx_context[i];
|
|
ctx->ndx = i;
|
|
|
|
if (cf) {
|
|
ctx->can = true;
|
|
ctx->dlc = cf->can_dlc;
|
|
} else {
|
|
ctx->can = false;
|
|
ctx->dlc = 0;
|
|
}
|
|
|
|
atomic_dec(&priv->free_ctx_cnt);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!atomic_read(&priv->free_ctx_cnt))
|
|
/* That was the last free ctx. Slow down tx path */
|
|
netif_stop_queue(priv->netdev);
|
|
|
|
return ctx;
|
|
}
|
|
|
|
/* mcba_usb_free_ctx and mcba_usb_get_free_ctx are executed by different
|
|
* threads. The order of execution in below function is important.
|
|
*/
|
|
static inline void mcba_usb_free_ctx(struct mcba_usb_ctx *ctx)
|
|
{
|
|
/* Increase number of free ctxs before freeing ctx */
|
|
atomic_inc(&ctx->priv->free_ctx_cnt);
|
|
|
|
ctx->ndx = MCBA_CTX_FREE;
|
|
|
|
/* Wake up the queue once ctx is marked free */
|
|
netif_wake_queue(ctx->priv->netdev);
|
|
}
|
|
|
|
static void mcba_usb_write_bulk_callback(struct urb *urb)
|
|
{
|
|
struct mcba_usb_ctx *ctx = urb->context;
|
|
struct net_device *netdev;
|
|
|
|
WARN_ON(!ctx);
|
|
|
|
netdev = ctx->priv->netdev;
|
|
|
|
/* free up our allocated buffer */
|
|
usb_free_coherent(urb->dev, urb->transfer_buffer_length,
|
|
urb->transfer_buffer, urb->transfer_dma);
|
|
|
|
if (ctx->can) {
|
|
if (!netif_device_present(netdev))
|
|
return;
|
|
|
|
netdev->stats.tx_packets++;
|
|
netdev->stats.tx_bytes += ctx->dlc;
|
|
|
|
can_led_event(netdev, CAN_LED_EVENT_TX);
|
|
can_get_echo_skb(netdev, ctx->ndx);
|
|
}
|
|
|
|
if (urb->status)
|
|
netdev_info(netdev, "Tx URB aborted (%d)\n", urb->status);
|
|
|
|
/* Release the context */
|
|
mcba_usb_free_ctx(ctx);
|
|
}
|
|
|
|
/* Send data to device */
|
|
static netdev_tx_t mcba_usb_xmit(struct mcba_priv *priv,
|
|
struct mcba_usb_msg *usb_msg,
|
|
struct mcba_usb_ctx *ctx)
|
|
{
|
|
struct urb *urb;
|
|
u8 *buf;
|
|
int err;
|
|
|
|
/* create a URB, and a buffer for it, and copy the data to the URB */
|
|
urb = usb_alloc_urb(0, GFP_ATOMIC);
|
|
if (!urb)
|
|
return -ENOMEM;
|
|
|
|
buf = usb_alloc_coherent(priv->udev, MCBA_USB_TX_BUFF_SIZE, GFP_ATOMIC,
|
|
&urb->transfer_dma);
|
|
if (!buf) {
|
|
err = -ENOMEM;
|
|
goto nomembuf;
|
|
}
|
|
|
|
memcpy(buf, usb_msg, MCBA_USB_TX_BUFF_SIZE);
|
|
|
|
usb_fill_bulk_urb(urb, priv->udev,
|
|
usb_sndbulkpipe(priv->udev, MCBA_USB_EP_OUT), buf,
|
|
MCBA_USB_TX_BUFF_SIZE, mcba_usb_write_bulk_callback,
|
|
ctx);
|
|
|
|
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
|
|
usb_anchor_urb(urb, &priv->tx_submitted);
|
|
|
|
err = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (unlikely(err))
|
|
goto failed;
|
|
|
|
/* Release our reference to this URB, the USB core will eventually free
|
|
* it entirely.
|
|
*/
|
|
usb_free_urb(urb);
|
|
|
|
return 0;
|
|
|
|
failed:
|
|
usb_unanchor_urb(urb);
|
|
usb_free_coherent(priv->udev, MCBA_USB_TX_BUFF_SIZE, buf,
|
|
urb->transfer_dma);
|
|
|
|
if (err == -ENODEV)
|
|
netif_device_detach(priv->netdev);
|
|
else
|
|
netdev_warn(priv->netdev, "failed tx_urb %d\n", err);
|
|
|
|
nomembuf:
|
|
usb_free_urb(urb);
|
|
|
|
return err;
|
|
}
|
|
|
|
/* Send data to device */
|
|
static netdev_tx_t mcba_usb_start_xmit(struct sk_buff *skb,
|
|
struct net_device *netdev)
|
|
{
|
|
struct mcba_priv *priv = netdev_priv(netdev);
|
|
struct can_frame *cf = (struct can_frame *)skb->data;
|
|
struct mcba_usb_ctx *ctx = NULL;
|
|
struct net_device_stats *stats = &priv->netdev->stats;
|
|
u16 sid;
|
|
int err;
|
|
struct mcba_usb_msg_can usb_msg = {
|
|
.cmd_id = MBCA_CMD_TRANSMIT_MESSAGE_EV
|
|
};
|
|
|
|
if (can_dropped_invalid_skb(netdev, skb))
|
|
return NETDEV_TX_OK;
|
|
|
|
ctx = mcba_usb_get_free_ctx(priv, cf);
|
|
if (!ctx)
|
|
return NETDEV_TX_BUSY;
|
|
|
|
can_put_echo_skb(skb, priv->netdev, ctx->ndx);
|
|
|
|
if (cf->can_id & CAN_EFF_FLAG) {
|
|
/* SIDH | SIDL | EIDH | EIDL
|
|
* 28 - 21 | 20 19 18 x x x 17 16 | 15 - 8 | 7 - 0
|
|
*/
|
|
sid = MCBA_SIDL_EXID_MASK;
|
|
/* store 28-18 bits */
|
|
sid |= (cf->can_id & 0x1ffc0000) >> 13;
|
|
/* store 17-16 bits */
|
|
sid |= (cf->can_id & 0x30000) >> 16;
|
|
put_unaligned_be16(sid, &usb_msg.sid);
|
|
|
|
/* store 15-0 bits */
|
|
put_unaligned_be16(cf->can_id & 0xffff, &usb_msg.eid);
|
|
} else {
|
|
/* SIDH | SIDL
|
|
* 10 - 3 | 2 1 0 x x x x x
|
|
*/
|
|
put_unaligned_be16((cf->can_id & CAN_SFF_MASK) << 5,
|
|
&usb_msg.sid);
|
|
usb_msg.eid = 0;
|
|
}
|
|
|
|
usb_msg.dlc = cf->can_dlc;
|
|
|
|
memcpy(usb_msg.data, cf->data, usb_msg.dlc);
|
|
|
|
if (cf->can_id & CAN_RTR_FLAG)
|
|
usb_msg.dlc |= MCBA_DLC_RTR_MASK;
|
|
|
|
err = mcba_usb_xmit(priv, (struct mcba_usb_msg *)&usb_msg, ctx);
|
|
if (err)
|
|
goto xmit_failed;
|
|
|
|
return NETDEV_TX_OK;
|
|
|
|
xmit_failed:
|
|
can_free_echo_skb(priv->netdev, ctx->ndx);
|
|
mcba_usb_free_ctx(ctx);
|
|
dev_kfree_skb(skb);
|
|
stats->tx_dropped++;
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/* Send cmd to device */
|
|
static void mcba_usb_xmit_cmd(struct mcba_priv *priv,
|
|
struct mcba_usb_msg *usb_msg)
|
|
{
|
|
struct mcba_usb_ctx *ctx = NULL;
|
|
int err;
|
|
|
|
ctx = mcba_usb_get_free_ctx(priv, NULL);
|
|
if (!ctx) {
|
|
netdev_err(priv->netdev,
|
|
"Lack of free ctx. Sending (%d) cmd aborted",
|
|
usb_msg->cmd_id);
|
|
|
|
return;
|
|
}
|
|
|
|
err = mcba_usb_xmit(priv, usb_msg, ctx);
|
|
if (err)
|
|
netdev_err(priv->netdev, "Failed to send cmd (%d)",
|
|
usb_msg->cmd_id);
|
|
}
|
|
|
|
static void mcba_usb_xmit_change_bitrate(struct mcba_priv *priv, u16 bitrate)
|
|
{
|
|
struct mcba_usb_msg_change_bitrate usb_msg = {
|
|
.cmd_id = MBCA_CMD_CHANGE_BIT_RATE
|
|
};
|
|
|
|
put_unaligned_be16(bitrate, &usb_msg.bitrate);
|
|
|
|
mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg);
|
|
}
|
|
|
|
static void mcba_usb_xmit_read_fw_ver(struct mcba_priv *priv, u8 pic)
|
|
{
|
|
struct mcba_usb_msg_fw_ver usb_msg = {
|
|
.cmd_id = MBCA_CMD_READ_FW_VERSION,
|
|
.pic = pic
|
|
};
|
|
|
|
mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg);
|
|
}
|
|
|
|
static void mcba_usb_process_can(struct mcba_priv *priv,
|
|
struct mcba_usb_msg_can *msg)
|
|
{
|
|
struct can_frame *cf;
|
|
struct sk_buff *skb;
|
|
struct net_device_stats *stats = &priv->netdev->stats;
|
|
u16 sid;
|
|
|
|
skb = alloc_can_skb(priv->netdev, &cf);
|
|
if (!skb)
|
|
return;
|
|
|
|
sid = get_unaligned_be16(&msg->sid);
|
|
|
|
if (sid & MCBA_SIDL_EXID_MASK) {
|
|
/* SIDH | SIDL | EIDH | EIDL
|
|
* 28 - 21 | 20 19 18 x x x 17 16 | 15 - 8 | 7 - 0
|
|
*/
|
|
cf->can_id = CAN_EFF_FLAG;
|
|
|
|
/* store 28-18 bits */
|
|
cf->can_id |= (sid & 0xffe0) << 13;
|
|
/* store 17-16 bits */
|
|
cf->can_id |= (sid & 3) << 16;
|
|
/* store 15-0 bits */
|
|
cf->can_id |= get_unaligned_be16(&msg->eid);
|
|
} else {
|
|
/* SIDH | SIDL
|
|
* 10 - 3 | 2 1 0 x x x x x
|
|
*/
|
|
cf->can_id = (sid & 0xffe0) >> 5;
|
|
}
|
|
|
|
if (msg->dlc & MCBA_DLC_RTR_MASK)
|
|
cf->can_id |= CAN_RTR_FLAG;
|
|
|
|
cf->can_dlc = get_can_dlc(msg->dlc & MCBA_DLC_MASK);
|
|
|
|
memcpy(cf->data, msg->data, cf->can_dlc);
|
|
|
|
stats->rx_packets++;
|
|
stats->rx_bytes += cf->can_dlc;
|
|
|
|
can_led_event(priv->netdev, CAN_LED_EVENT_RX);
|
|
netif_rx(skb);
|
|
}
|
|
|
|
static void mcba_usb_process_ka_usb(struct mcba_priv *priv,
|
|
struct mcba_usb_msg_ka_usb *msg)
|
|
{
|
|
if (unlikely(priv->usb_ka_first_pass)) {
|
|
netdev_info(priv->netdev, "PIC USB version %hhu.%hhu\n",
|
|
msg->soft_ver_major, msg->soft_ver_minor);
|
|
|
|
priv->usb_ka_first_pass = false;
|
|
}
|
|
|
|
if (msg->termination_state)
|
|
priv->can.termination = MCBA_TERMINATION_ENABLED;
|
|
else
|
|
priv->can.termination = MCBA_TERMINATION_DISABLED;
|
|
}
|
|
|
|
static u32 convert_can2host_bitrate(struct mcba_usb_msg_ka_can *msg)
|
|
{
|
|
const u32 bitrate = get_unaligned_be16(&msg->can_bitrate);
|
|
|
|
if ((bitrate == 33) || (bitrate == 83))
|
|
return bitrate * 1000 + 333;
|
|
else
|
|
return bitrate * 1000;
|
|
}
|
|
|
|
static void mcba_usb_process_ka_can(struct mcba_priv *priv,
|
|
struct mcba_usb_msg_ka_can *msg)
|
|
{
|
|
if (unlikely(priv->can_ka_first_pass)) {
|
|
netdev_info(priv->netdev, "PIC CAN version %hhu.%hhu\n",
|
|
msg->soft_ver_major, msg->soft_ver_minor);
|
|
|
|
priv->can_ka_first_pass = false;
|
|
}
|
|
|
|
if (unlikely(priv->can_speed_check)) {
|
|
const u32 bitrate = convert_can2host_bitrate(msg);
|
|
|
|
priv->can_speed_check = false;
|
|
|
|
if (bitrate != priv->can.bittiming.bitrate)
|
|
netdev_err(
|
|
priv->netdev,
|
|
"Wrong bitrate reported by the device (%u). Expected %u",
|
|
bitrate, priv->can.bittiming.bitrate);
|
|
}
|
|
|
|
priv->bec.txerr = msg->tx_err_cnt;
|
|
priv->bec.rxerr = msg->rx_err_cnt;
|
|
|
|
if (msg->tx_bus_off)
|
|
priv->can.state = CAN_STATE_BUS_OFF;
|
|
|
|
else if ((priv->bec.txerr > MCBA_CAN_STATE_ERR_PSV_TH) ||
|
|
(priv->bec.rxerr > MCBA_CAN_STATE_ERR_PSV_TH))
|
|
priv->can.state = CAN_STATE_ERROR_PASSIVE;
|
|
|
|
else if ((priv->bec.txerr > MCBA_CAN_STATE_WRN_TH) ||
|
|
(priv->bec.rxerr > MCBA_CAN_STATE_WRN_TH))
|
|
priv->can.state = CAN_STATE_ERROR_WARNING;
|
|
}
|
|
|
|
static void mcba_usb_process_rx(struct mcba_priv *priv,
|
|
struct mcba_usb_msg *msg)
|
|
{
|
|
switch (msg->cmd_id) {
|
|
case MBCA_CMD_I_AM_ALIVE_FROM_CAN:
|
|
mcba_usb_process_ka_can(priv,
|
|
(struct mcba_usb_msg_ka_can *)msg);
|
|
break;
|
|
|
|
case MBCA_CMD_I_AM_ALIVE_FROM_USB:
|
|
mcba_usb_process_ka_usb(priv,
|
|
(struct mcba_usb_msg_ka_usb *)msg);
|
|
break;
|
|
|
|
case MBCA_CMD_RECEIVE_MESSAGE:
|
|
mcba_usb_process_can(priv, (struct mcba_usb_msg_can *)msg);
|
|
break;
|
|
|
|
case MBCA_CMD_NOTHING_TO_SEND:
|
|
/* Side effect of communication between PIC_USB and PIC_CAN.
|
|
* PIC_CAN is telling us that it has nothing to send
|
|
*/
|
|
break;
|
|
|
|
case MBCA_CMD_TRANSMIT_MESSAGE_RSP:
|
|
/* Transmission response from the device containing timestamp */
|
|
break;
|
|
|
|
default:
|
|
netdev_warn(priv->netdev, "Unsupported msg (0x%hhX)",
|
|
msg->cmd_id);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Callback for reading data from device
|
|
*
|
|
* Check urb status, call read function and resubmit urb read operation.
|
|
*/
|
|
static void mcba_usb_read_bulk_callback(struct urb *urb)
|
|
{
|
|
struct mcba_priv *priv = urb->context;
|
|
struct net_device *netdev;
|
|
int retval;
|
|
int pos = 0;
|
|
|
|
netdev = priv->netdev;
|
|
|
|
if (!netif_device_present(netdev))
|
|
return;
|
|
|
|
switch (urb->status) {
|
|
case 0: /* success */
|
|
break;
|
|
|
|
case -ENOENT:
|
|
case -EPIPE:
|
|
case -EPROTO:
|
|
case -ESHUTDOWN:
|
|
return;
|
|
|
|
default:
|
|
netdev_info(netdev, "Rx URB aborted (%d)\n", urb->status);
|
|
|
|
goto resubmit_urb;
|
|
}
|
|
|
|
while (pos < urb->actual_length) {
|
|
struct mcba_usb_msg *msg;
|
|
|
|
if (pos + sizeof(struct mcba_usb_msg) > urb->actual_length) {
|
|
netdev_err(priv->netdev, "format error\n");
|
|
break;
|
|
}
|
|
|
|
msg = (struct mcba_usb_msg *)(urb->transfer_buffer + pos);
|
|
mcba_usb_process_rx(priv, msg);
|
|
|
|
pos += sizeof(struct mcba_usb_msg);
|
|
}
|
|
|
|
resubmit_urb:
|
|
|
|
usb_fill_bulk_urb(urb, priv->udev,
|
|
usb_rcvbulkpipe(priv->udev, MCBA_USB_EP_OUT),
|
|
urb->transfer_buffer, MCBA_USB_RX_BUFF_SIZE,
|
|
mcba_usb_read_bulk_callback, priv);
|
|
|
|
retval = usb_submit_urb(urb, GFP_ATOMIC);
|
|
|
|
if (retval == -ENODEV)
|
|
netif_device_detach(netdev);
|
|
else if (retval)
|
|
netdev_err(netdev, "failed resubmitting read bulk urb: %d\n",
|
|
retval);
|
|
}
|
|
|
|
/* Start USB device */
|
|
static int mcba_usb_start(struct mcba_priv *priv)
|
|
{
|
|
struct net_device *netdev = priv->netdev;
|
|
int err, i;
|
|
|
|
mcba_init_ctx(priv);
|
|
|
|
for (i = 0; i < MCBA_MAX_RX_URBS; i++) {
|
|
struct urb *urb = NULL;
|
|
u8 *buf;
|
|
|
|
/* create a URB, and a buffer for it */
|
|
urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!urb) {
|
|
err = -ENOMEM;
|
|
break;
|
|
}
|
|
|
|
buf = usb_alloc_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE,
|
|
GFP_KERNEL, &urb->transfer_dma);
|
|
if (!buf) {
|
|
netdev_err(netdev, "No memory left for USB buffer\n");
|
|
usb_free_urb(urb);
|
|
err = -ENOMEM;
|
|
break;
|
|
}
|
|
|
|
usb_fill_bulk_urb(urb, priv->udev,
|
|
usb_rcvbulkpipe(priv->udev, MCBA_USB_EP_IN),
|
|
buf, MCBA_USB_RX_BUFF_SIZE,
|
|
mcba_usb_read_bulk_callback, priv);
|
|
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
|
|
usb_anchor_urb(urb, &priv->rx_submitted);
|
|
|
|
err = usb_submit_urb(urb, GFP_KERNEL);
|
|
if (err) {
|
|
usb_unanchor_urb(urb);
|
|
usb_free_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE,
|
|
buf, urb->transfer_dma);
|
|
usb_free_urb(urb);
|
|
break;
|
|
}
|
|
|
|
/* Drop reference, USB core will take care of freeing it */
|
|
usb_free_urb(urb);
|
|
}
|
|
|
|
/* Did we submit any URBs */
|
|
if (i == 0) {
|
|
netdev_warn(netdev, "couldn't setup read URBs\n");
|
|
return err;
|
|
}
|
|
|
|
/* Warn if we've couldn't transmit all the URBs */
|
|
if (i < MCBA_MAX_RX_URBS)
|
|
netdev_warn(netdev, "rx performance may be slow\n");
|
|
|
|
mcba_usb_xmit_read_fw_ver(priv, MCBA_VER_REQ_USB);
|
|
mcba_usb_xmit_read_fw_ver(priv, MCBA_VER_REQ_CAN);
|
|
|
|
return err;
|
|
}
|
|
|
|
/* Open USB device */
|
|
static int mcba_usb_open(struct net_device *netdev)
|
|
{
|
|
struct mcba_priv *priv = netdev_priv(netdev);
|
|
int err;
|
|
|
|
/* common open */
|
|
err = open_candev(netdev);
|
|
if (err)
|
|
return err;
|
|
|
|
priv->can_speed_check = true;
|
|
priv->can.state = CAN_STATE_ERROR_ACTIVE;
|
|
|
|
can_led_event(netdev, CAN_LED_EVENT_OPEN);
|
|
netif_start_queue(netdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mcba_urb_unlink(struct mcba_priv *priv)
|
|
{
|
|
usb_kill_anchored_urbs(&priv->rx_submitted);
|
|
usb_kill_anchored_urbs(&priv->tx_submitted);
|
|
}
|
|
|
|
/* Close USB device */
|
|
static int mcba_usb_close(struct net_device *netdev)
|
|
{
|
|
struct mcba_priv *priv = netdev_priv(netdev);
|
|
|
|
priv->can.state = CAN_STATE_STOPPED;
|
|
|
|
netif_stop_queue(netdev);
|
|
|
|
/* Stop polling */
|
|
mcba_urb_unlink(priv);
|
|
|
|
close_candev(netdev);
|
|
can_led_event(netdev, CAN_LED_EVENT_STOP);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set network device mode
|
|
*
|
|
* Maybe we should leave this function empty, because the device
|
|
* set mode variable with open command.
|
|
*/
|
|
static int mcba_net_set_mode(struct net_device *netdev, enum can_mode mode)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int mcba_net_get_berr_counter(const struct net_device *netdev,
|
|
struct can_berr_counter *bec)
|
|
{
|
|
struct mcba_priv *priv = netdev_priv(netdev);
|
|
|
|
bec->txerr = priv->bec.txerr;
|
|
bec->rxerr = priv->bec.rxerr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct net_device_ops mcba_netdev_ops = {
|
|
.ndo_open = mcba_usb_open,
|
|
.ndo_stop = mcba_usb_close,
|
|
.ndo_start_xmit = mcba_usb_start_xmit,
|
|
};
|
|
|
|
/* Microchip CANBUS has hardcoded bittiming values by default.
|
|
* This function sends request via USB to change the speed and align bittiming
|
|
* values for presentation purposes only
|
|
*/
|
|
static int mcba_net_set_bittiming(struct net_device *netdev)
|
|
{
|
|
struct mcba_priv *priv = netdev_priv(netdev);
|
|
const u16 bitrate_kbps = priv->can.bittiming.bitrate / 1000;
|
|
|
|
mcba_usb_xmit_change_bitrate(priv, bitrate_kbps);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mcba_set_termination(struct net_device *netdev, u16 term)
|
|
{
|
|
struct mcba_priv *priv = netdev_priv(netdev);
|
|
struct mcba_usb_msg_termination usb_msg = {
|
|
.cmd_id = MBCA_CMD_SETUP_TERMINATION_RESISTANCE
|
|
};
|
|
|
|
if (term == MCBA_TERMINATION_ENABLED)
|
|
usb_msg.termination = 1;
|
|
else
|
|
usb_msg.termination = 0;
|
|
|
|
mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mcba_usb_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct net_device *netdev;
|
|
struct mcba_priv *priv;
|
|
int err = -ENOMEM;
|
|
struct usb_device *usbdev = interface_to_usbdev(intf);
|
|
|
|
netdev = alloc_candev(sizeof(struct mcba_priv), MCBA_MAX_TX_URBS);
|
|
if (!netdev) {
|
|
dev_err(&intf->dev, "Couldn't alloc candev\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
priv = netdev_priv(netdev);
|
|
|
|
priv->udev = usbdev;
|
|
priv->netdev = netdev;
|
|
priv->usb_ka_first_pass = true;
|
|
priv->can_ka_first_pass = true;
|
|
priv->can_speed_check = false;
|
|
|
|
init_usb_anchor(&priv->rx_submitted);
|
|
init_usb_anchor(&priv->tx_submitted);
|
|
|
|
usb_set_intfdata(intf, priv);
|
|
|
|
/* Init CAN device */
|
|
priv->can.state = CAN_STATE_STOPPED;
|
|
priv->can.termination_const = mcba_termination;
|
|
priv->can.termination_const_cnt = ARRAY_SIZE(mcba_termination);
|
|
priv->can.bitrate_const = mcba_bitrate;
|
|
priv->can.bitrate_const_cnt = ARRAY_SIZE(mcba_bitrate);
|
|
|
|
priv->can.do_set_termination = mcba_set_termination;
|
|
priv->can.do_set_mode = mcba_net_set_mode;
|
|
priv->can.do_get_berr_counter = mcba_net_get_berr_counter;
|
|
priv->can.do_set_bittiming = mcba_net_set_bittiming;
|
|
|
|
netdev->netdev_ops = &mcba_netdev_ops;
|
|
|
|
netdev->flags |= IFF_ECHO; /* we support local echo */
|
|
|
|
SET_NETDEV_DEV(netdev, &intf->dev);
|
|
|
|
err = register_candev(netdev);
|
|
if (err) {
|
|
netdev_err(netdev, "couldn't register CAN device: %d\n", err);
|
|
|
|
goto cleanup_free_candev;
|
|
}
|
|
|
|
devm_can_led_init(netdev);
|
|
|
|
/* Start USB dev only if we have successfully registered CAN device */
|
|
err = mcba_usb_start(priv);
|
|
if (err) {
|
|
if (err == -ENODEV)
|
|
netif_device_detach(priv->netdev);
|
|
|
|
netdev_warn(netdev, "couldn't start device: %d\n", err);
|
|
|
|
goto cleanup_unregister_candev;
|
|
}
|
|
|
|
dev_info(&intf->dev, "Microchip CAN BUS Analyzer connected\n");
|
|
|
|
return 0;
|
|
|
|
cleanup_unregister_candev:
|
|
unregister_candev(priv->netdev);
|
|
|
|
cleanup_free_candev:
|
|
free_candev(netdev);
|
|
|
|
return err;
|
|
}
|
|
|
|
/* Called by the usb core when driver is unloaded or device is removed */
|
|
static void mcba_usb_disconnect(struct usb_interface *intf)
|
|
{
|
|
struct mcba_priv *priv = usb_get_intfdata(intf);
|
|
|
|
usb_set_intfdata(intf, NULL);
|
|
|
|
netdev_info(priv->netdev, "device disconnected\n");
|
|
|
|
unregister_candev(priv->netdev);
|
|
free_candev(priv->netdev);
|
|
|
|
mcba_urb_unlink(priv);
|
|
}
|
|
|
|
static struct usb_driver mcba_usb_driver = {
|
|
.name = MCBA_MODULE_NAME,
|
|
.probe = mcba_usb_probe,
|
|
.disconnect = mcba_usb_disconnect,
|
|
.id_table = mcba_usb_table,
|
|
};
|
|
|
|
module_usb_driver(mcba_usb_driver);
|
|
|
|
MODULE_AUTHOR("Remigiusz Kołłątaj <remigiusz.kollataj@mobica.com>");
|
|
MODULE_DESCRIPTION("SocketCAN driver for Microchip CAN BUS Analyzer Tool");
|
|
MODULE_LICENSE("GPL v2");
|