793 lines
22 KiB
C
793 lines
22 KiB
C
/*
|
|
* Hardware monitoring driver for LTC2978 and compatible chips.
|
|
*
|
|
* Copyright (c) 2011 Ericsson AB.
|
|
* Copyright (c) 2013, 2014, 2015 Guenter Roeck
|
|
* Copyright (c) 2015 Linear Technology
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/err.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include "pmbus.h"
|
|
|
|
enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
|
|
ltc3883, ltc3886, ltc3887, ltm2987, ltm4675, ltm4676 };
|
|
|
|
/* Common for all chips */
|
|
#define LTC2978_MFR_VOUT_PEAK 0xdd
|
|
#define LTC2978_MFR_VIN_PEAK 0xde
|
|
#define LTC2978_MFR_TEMPERATURE_PEAK 0xdf
|
|
#define LTC2978_MFR_SPECIAL_ID 0xe7 /* Undocumented on LTC3882 */
|
|
#define LTC2978_MFR_COMMON 0xef
|
|
|
|
/* LTC2974, LTC2975, LCT2977, LTC2980, LTC2978, and LTM2987 */
|
|
#define LTC2978_MFR_VOUT_MIN 0xfb
|
|
#define LTC2978_MFR_VIN_MIN 0xfc
|
|
#define LTC2978_MFR_TEMPERATURE_MIN 0xfd
|
|
|
|
/* LTC2974, LTC2975 */
|
|
#define LTC2974_MFR_IOUT_PEAK 0xd7
|
|
#define LTC2974_MFR_IOUT_MIN 0xd8
|
|
|
|
/* LTC3880, LTC3882, LTC3883, LTC3887, LTM4675, and LTM4676 */
|
|
#define LTC3880_MFR_IOUT_PEAK 0xd7
|
|
#define LTC3880_MFR_CLEAR_PEAKS 0xe3
|
|
#define LTC3880_MFR_TEMPERATURE2_PEAK 0xf4
|
|
|
|
/* LTC3883 and LTC3886 only */
|
|
#define LTC3883_MFR_IIN_PEAK 0xe1
|
|
|
|
/* LTC2975 only */
|
|
#define LTC2975_MFR_IIN_PEAK 0xc4
|
|
#define LTC2975_MFR_IIN_MIN 0xc5
|
|
#define LTC2975_MFR_PIN_PEAK 0xc6
|
|
#define LTC2975_MFR_PIN_MIN 0xc7
|
|
|
|
#define LTC2978_ID_MASK 0xfff0
|
|
|
|
#define LTC2974_ID 0x0210
|
|
#define LTC2975_ID 0x0220
|
|
#define LTC2977_ID 0x0130
|
|
#define LTC2978_ID_REV1 0x0110 /* Early revision */
|
|
#define LTC2978_ID_REV2 0x0120
|
|
#define LTC2980_ID_A 0x8030 /* A/B for two die IDs */
|
|
#define LTC2980_ID_B 0x8040
|
|
#define LTC3880_ID 0x4020
|
|
#define LTC3882_ID 0x4200
|
|
#define LTC3882_ID_D1 0x4240 /* Dash 1 */
|
|
#define LTC3883_ID 0x4300
|
|
#define LTC3886_ID 0x4600
|
|
#define LTC3887_ID 0x4700
|
|
#define LTM2987_ID_A 0x8010 /* A/B for two die IDs */
|
|
#define LTM2987_ID_B 0x8020
|
|
#define LTM4675_ID 0x47a0
|
|
#define LTM4676_ID_REV1 0x4400
|
|
#define LTM4676_ID_REV2 0x4480
|
|
#define LTM4676A_ID 0x47e0
|
|
|
|
#define LTC2974_NUM_PAGES 4
|
|
#define LTC2978_NUM_PAGES 8
|
|
#define LTC3880_NUM_PAGES 2
|
|
#define LTC3883_NUM_PAGES 1
|
|
|
|
#define LTC_POLL_TIMEOUT 100 /* in milli-seconds */
|
|
|
|
#define LTC_NOT_BUSY BIT(5)
|
|
#define LTC_NOT_PENDING BIT(4)
|
|
|
|
/*
|
|
* LTC2978 clears peak data whenever the CLEAR_FAULTS command is executed, which
|
|
* happens pretty much each time chip data is updated. Raw peak data therefore
|
|
* does not provide much value. To be able to provide useful peak data, keep an
|
|
* internal cache of measured peak data, which is only cleared if an explicit
|
|
* "clear peak" command is executed for the sensor in question.
|
|
*/
|
|
|
|
struct ltc2978_data {
|
|
enum chips id;
|
|
u16 vin_min, vin_max;
|
|
u16 temp_min[LTC2974_NUM_PAGES], temp_max[LTC2974_NUM_PAGES];
|
|
u16 vout_min[LTC2978_NUM_PAGES], vout_max[LTC2978_NUM_PAGES];
|
|
u16 iout_min[LTC2974_NUM_PAGES], iout_max[LTC2974_NUM_PAGES];
|
|
u16 iin_min, iin_max;
|
|
u16 pin_min, pin_max;
|
|
u16 temp2_max;
|
|
struct pmbus_driver_info info;
|
|
u32 features;
|
|
};
|
|
#define to_ltc2978_data(x) container_of(x, struct ltc2978_data, info)
|
|
|
|
#define FEAT_CLEAR_PEAKS BIT(0)
|
|
#define FEAT_NEEDS_POLLING BIT(1)
|
|
|
|
#define has_clear_peaks(d) ((d)->features & FEAT_CLEAR_PEAKS)
|
|
#define needs_polling(d) ((d)->features & FEAT_NEEDS_POLLING)
|
|
|
|
static int ltc_wait_ready(struct i2c_client *client)
|
|
{
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(LTC_POLL_TIMEOUT);
|
|
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
|
|
struct ltc2978_data *data = to_ltc2978_data(info);
|
|
int status;
|
|
u8 mask;
|
|
|
|
if (!needs_polling(data))
|
|
return 0;
|
|
|
|
/*
|
|
* LTC3883 does not support LTC_NOT_PENDING, even though
|
|
* the datasheet claims that it does.
|
|
*/
|
|
mask = LTC_NOT_BUSY;
|
|
if (data->id != ltc3883)
|
|
mask |= LTC_NOT_PENDING;
|
|
|
|
do {
|
|
status = pmbus_read_byte_data(client, 0, LTC2978_MFR_COMMON);
|
|
if (status == -EBADMSG || status == -ENXIO) {
|
|
/* PEC error or NACK: chip may be busy, try again */
|
|
usleep_range(50, 100);
|
|
continue;
|
|
}
|
|
if (status < 0)
|
|
return status;
|
|
|
|
if ((status & mask) == mask)
|
|
return 0;
|
|
|
|
usleep_range(50, 100);
|
|
} while (time_before(jiffies, timeout));
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int ltc_read_word_data(struct i2c_client *client, int page, int reg)
|
|
{
|
|
int ret;
|
|
|
|
ret = ltc_wait_ready(client);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return pmbus_read_word_data(client, page, reg);
|
|
}
|
|
|
|
static int ltc_read_byte_data(struct i2c_client *client, int page, int reg)
|
|
{
|
|
int ret;
|
|
|
|
ret = ltc_wait_ready(client);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return pmbus_read_byte_data(client, page, reg);
|
|
}
|
|
|
|
static int ltc_write_byte(struct i2c_client *client, int page, u8 byte)
|
|
{
|
|
int ret;
|
|
|
|
ret = ltc_wait_ready(client);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return pmbus_write_byte(client, page, byte);
|
|
}
|
|
|
|
static inline int lin11_to_val(int data)
|
|
{
|
|
s16 e = ((s16)data) >> 11;
|
|
s32 m = (((s16)(data << 5)) >> 5);
|
|
|
|
/*
|
|
* mantissa is 10 bit + sign, exponent adds up to 15 bit.
|
|
* Add 6 bit to exponent for maximum accuracy (10 + 15 + 6 = 31).
|
|
*/
|
|
e += 6;
|
|
return (e < 0 ? m >> -e : m << e);
|
|
}
|
|
|
|
static int ltc_get_max(struct ltc2978_data *data, struct i2c_client *client,
|
|
int page, int reg, u16 *pmax)
|
|
{
|
|
int ret;
|
|
|
|
ret = ltc_read_word_data(client, page, reg);
|
|
if (ret >= 0) {
|
|
if (lin11_to_val(ret) > lin11_to_val(*pmax))
|
|
*pmax = ret;
|
|
ret = *pmax;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int ltc_get_min(struct ltc2978_data *data, struct i2c_client *client,
|
|
int page, int reg, u16 *pmin)
|
|
{
|
|
int ret;
|
|
|
|
ret = ltc_read_word_data(client, page, reg);
|
|
if (ret >= 0) {
|
|
if (lin11_to_val(ret) < lin11_to_val(*pmin))
|
|
*pmin = ret;
|
|
ret = *pmin;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int ltc2978_read_word_data_common(struct i2c_client *client, int page,
|
|
int reg)
|
|
{
|
|
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
|
|
struct ltc2978_data *data = to_ltc2978_data(info);
|
|
int ret;
|
|
|
|
switch (reg) {
|
|
case PMBUS_VIRT_READ_VIN_MAX:
|
|
ret = ltc_get_max(data, client, page, LTC2978_MFR_VIN_PEAK,
|
|
&data->vin_max);
|
|
break;
|
|
case PMBUS_VIRT_READ_VOUT_MAX:
|
|
ret = ltc_read_word_data(client, page, LTC2978_MFR_VOUT_PEAK);
|
|
if (ret >= 0) {
|
|
/*
|
|
* VOUT is 16 bit unsigned with fixed exponent,
|
|
* so we can compare it directly
|
|
*/
|
|
if (ret > data->vout_max[page])
|
|
data->vout_max[page] = ret;
|
|
ret = data->vout_max[page];
|
|
}
|
|
break;
|
|
case PMBUS_VIRT_READ_TEMP_MAX:
|
|
ret = ltc_get_max(data, client, page,
|
|
LTC2978_MFR_TEMPERATURE_PEAK,
|
|
&data->temp_max[page]);
|
|
break;
|
|
case PMBUS_VIRT_RESET_VOUT_HISTORY:
|
|
case PMBUS_VIRT_RESET_VIN_HISTORY:
|
|
case PMBUS_VIRT_RESET_TEMP_HISTORY:
|
|
ret = 0;
|
|
break;
|
|
default:
|
|
ret = ltc_wait_ready(client);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = -ENODATA;
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int ltc2978_read_word_data(struct i2c_client *client, int page, int reg)
|
|
{
|
|
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
|
|
struct ltc2978_data *data = to_ltc2978_data(info);
|
|
int ret;
|
|
|
|
switch (reg) {
|
|
case PMBUS_VIRT_READ_VIN_MIN:
|
|
ret = ltc_get_min(data, client, page, LTC2978_MFR_VIN_MIN,
|
|
&data->vin_min);
|
|
break;
|
|
case PMBUS_VIRT_READ_VOUT_MIN:
|
|
ret = ltc_read_word_data(client, page, LTC2978_MFR_VOUT_MIN);
|
|
if (ret >= 0) {
|
|
/*
|
|
* VOUT_MIN is known to not be supported on some lots
|
|
* of LTC2978 revision 1, and will return the maximum
|
|
* possible voltage if read. If VOUT_MAX is valid and
|
|
* lower than the reading of VOUT_MIN, use it instead.
|
|
*/
|
|
if (data->vout_max[page] && ret > data->vout_max[page])
|
|
ret = data->vout_max[page];
|
|
if (ret < data->vout_min[page])
|
|
data->vout_min[page] = ret;
|
|
ret = data->vout_min[page];
|
|
}
|
|
break;
|
|
case PMBUS_VIRT_READ_TEMP_MIN:
|
|
ret = ltc_get_min(data, client, page,
|
|
LTC2978_MFR_TEMPERATURE_MIN,
|
|
&data->temp_min[page]);
|
|
break;
|
|
case PMBUS_VIRT_READ_IOUT_MAX:
|
|
case PMBUS_VIRT_RESET_IOUT_HISTORY:
|
|
case PMBUS_VIRT_READ_TEMP2_MAX:
|
|
case PMBUS_VIRT_RESET_TEMP2_HISTORY:
|
|
ret = -ENXIO;
|
|
break;
|
|
default:
|
|
ret = ltc2978_read_word_data_common(client, page, reg);
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int ltc2974_read_word_data(struct i2c_client *client, int page, int reg)
|
|
{
|
|
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
|
|
struct ltc2978_data *data = to_ltc2978_data(info);
|
|
int ret;
|
|
|
|
switch (reg) {
|
|
case PMBUS_VIRT_READ_IOUT_MAX:
|
|
ret = ltc_get_max(data, client, page, LTC2974_MFR_IOUT_PEAK,
|
|
&data->iout_max[page]);
|
|
break;
|
|
case PMBUS_VIRT_READ_IOUT_MIN:
|
|
ret = ltc_get_min(data, client, page, LTC2974_MFR_IOUT_MIN,
|
|
&data->iout_min[page]);
|
|
break;
|
|
case PMBUS_VIRT_RESET_IOUT_HISTORY:
|
|
ret = 0;
|
|
break;
|
|
default:
|
|
ret = ltc2978_read_word_data(client, page, reg);
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int ltc2975_read_word_data(struct i2c_client *client, int page, int reg)
|
|
{
|
|
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
|
|
struct ltc2978_data *data = to_ltc2978_data(info);
|
|
int ret;
|
|
|
|
switch (reg) {
|
|
case PMBUS_VIRT_READ_IIN_MAX:
|
|
ret = ltc_get_max(data, client, page, LTC2975_MFR_IIN_PEAK,
|
|
&data->iin_max);
|
|
break;
|
|
case PMBUS_VIRT_READ_IIN_MIN:
|
|
ret = ltc_get_min(data, client, page, LTC2975_MFR_IIN_MIN,
|
|
&data->iin_min);
|
|
break;
|
|
case PMBUS_VIRT_READ_PIN_MAX:
|
|
ret = ltc_get_max(data, client, page, LTC2975_MFR_PIN_PEAK,
|
|
&data->pin_max);
|
|
break;
|
|
case PMBUS_VIRT_READ_PIN_MIN:
|
|
ret = ltc_get_min(data, client, page, LTC2975_MFR_PIN_MIN,
|
|
&data->pin_min);
|
|
break;
|
|
case PMBUS_VIRT_RESET_IIN_HISTORY:
|
|
case PMBUS_VIRT_RESET_PIN_HISTORY:
|
|
ret = 0;
|
|
break;
|
|
default:
|
|
ret = ltc2978_read_word_data(client, page, reg);
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int ltc3880_read_word_data(struct i2c_client *client, int page, int reg)
|
|
{
|
|
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
|
|
struct ltc2978_data *data = to_ltc2978_data(info);
|
|
int ret;
|
|
|
|
switch (reg) {
|
|
case PMBUS_VIRT_READ_IOUT_MAX:
|
|
ret = ltc_get_max(data, client, page, LTC3880_MFR_IOUT_PEAK,
|
|
&data->iout_max[page]);
|
|
break;
|
|
case PMBUS_VIRT_READ_TEMP2_MAX:
|
|
ret = ltc_get_max(data, client, page,
|
|
LTC3880_MFR_TEMPERATURE2_PEAK,
|
|
&data->temp2_max);
|
|
break;
|
|
case PMBUS_VIRT_READ_VIN_MIN:
|
|
case PMBUS_VIRT_READ_VOUT_MIN:
|
|
case PMBUS_VIRT_READ_TEMP_MIN:
|
|
ret = -ENXIO;
|
|
break;
|
|
case PMBUS_VIRT_RESET_IOUT_HISTORY:
|
|
case PMBUS_VIRT_RESET_TEMP2_HISTORY:
|
|
ret = 0;
|
|
break;
|
|
default:
|
|
ret = ltc2978_read_word_data_common(client, page, reg);
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int ltc3883_read_word_data(struct i2c_client *client, int page, int reg)
|
|
{
|
|
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
|
|
struct ltc2978_data *data = to_ltc2978_data(info);
|
|
int ret;
|
|
|
|
switch (reg) {
|
|
case PMBUS_VIRT_READ_IIN_MAX:
|
|
ret = ltc_get_max(data, client, page, LTC3883_MFR_IIN_PEAK,
|
|
&data->iin_max);
|
|
break;
|
|
case PMBUS_VIRT_RESET_IIN_HISTORY:
|
|
ret = 0;
|
|
break;
|
|
default:
|
|
ret = ltc3880_read_word_data(client, page, reg);
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int ltc2978_clear_peaks(struct ltc2978_data *data,
|
|
struct i2c_client *client, int page)
|
|
{
|
|
int ret;
|
|
|
|
if (has_clear_peaks(data))
|
|
ret = ltc_write_byte(client, 0, LTC3880_MFR_CLEAR_PEAKS);
|
|
else
|
|
ret = ltc_write_byte(client, page, PMBUS_CLEAR_FAULTS);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ltc2978_write_word_data(struct i2c_client *client, int page,
|
|
int reg, u16 word)
|
|
{
|
|
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
|
|
struct ltc2978_data *data = to_ltc2978_data(info);
|
|
int ret;
|
|
|
|
switch (reg) {
|
|
case PMBUS_VIRT_RESET_IIN_HISTORY:
|
|
data->iin_max = 0x7c00;
|
|
data->iin_min = 0x7bff;
|
|
ret = ltc2978_clear_peaks(data, client, 0);
|
|
break;
|
|
case PMBUS_VIRT_RESET_PIN_HISTORY:
|
|
data->pin_max = 0x7c00;
|
|
data->pin_min = 0x7bff;
|
|
ret = ltc2978_clear_peaks(data, client, 0);
|
|
break;
|
|
case PMBUS_VIRT_RESET_IOUT_HISTORY:
|
|
data->iout_max[page] = 0x7c00;
|
|
data->iout_min[page] = 0xfbff;
|
|
ret = ltc2978_clear_peaks(data, client, page);
|
|
break;
|
|
case PMBUS_VIRT_RESET_TEMP2_HISTORY:
|
|
data->temp2_max = 0x7c00;
|
|
ret = ltc2978_clear_peaks(data, client, page);
|
|
break;
|
|
case PMBUS_VIRT_RESET_VOUT_HISTORY:
|
|
data->vout_min[page] = 0xffff;
|
|
data->vout_max[page] = 0;
|
|
ret = ltc2978_clear_peaks(data, client, page);
|
|
break;
|
|
case PMBUS_VIRT_RESET_VIN_HISTORY:
|
|
data->vin_min = 0x7bff;
|
|
data->vin_max = 0x7c00;
|
|
ret = ltc2978_clear_peaks(data, client, page);
|
|
break;
|
|
case PMBUS_VIRT_RESET_TEMP_HISTORY:
|
|
data->temp_min[page] = 0x7bff;
|
|
data->temp_max[page] = 0x7c00;
|
|
ret = ltc2978_clear_peaks(data, client, page);
|
|
break;
|
|
default:
|
|
ret = ltc_wait_ready(client);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = -ENODATA;
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static const struct i2c_device_id ltc2978_id[] = {
|
|
{"ltc2974", ltc2974},
|
|
{"ltc2975", ltc2975},
|
|
{"ltc2977", ltc2977},
|
|
{"ltc2978", ltc2978},
|
|
{"ltc2980", ltc2980},
|
|
{"ltc3880", ltc3880},
|
|
{"ltc3882", ltc3882},
|
|
{"ltc3883", ltc3883},
|
|
{"ltc3886", ltc3886},
|
|
{"ltc3887", ltc3887},
|
|
{"ltm2987", ltm2987},
|
|
{"ltm4675", ltm4675},
|
|
{"ltm4676", ltm4676},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ltc2978_id);
|
|
|
|
#if IS_ENABLED(CONFIG_SENSORS_LTC2978_REGULATOR)
|
|
static const struct regulator_desc ltc2978_reg_desc[] = {
|
|
PMBUS_REGULATOR("vout", 0),
|
|
PMBUS_REGULATOR("vout", 1),
|
|
PMBUS_REGULATOR("vout", 2),
|
|
PMBUS_REGULATOR("vout", 3),
|
|
PMBUS_REGULATOR("vout", 4),
|
|
PMBUS_REGULATOR("vout", 5),
|
|
PMBUS_REGULATOR("vout", 6),
|
|
PMBUS_REGULATOR("vout", 7),
|
|
};
|
|
#endif /* CONFIG_SENSORS_LTC2978_REGULATOR */
|
|
|
|
static int ltc2978_get_id(struct i2c_client *client)
|
|
{
|
|
int chip_id;
|
|
|
|
chip_id = i2c_smbus_read_word_data(client, LTC2978_MFR_SPECIAL_ID);
|
|
if (chip_id < 0) {
|
|
const struct i2c_device_id *id;
|
|
u8 buf[I2C_SMBUS_BLOCK_MAX];
|
|
int ret;
|
|
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_READ_BLOCK_DATA))
|
|
return -ENODEV;
|
|
|
|
ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret < 3 || strncmp(buf, "LTC", 3))
|
|
return -ENODEV;
|
|
|
|
ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
for (id = <c2978_id[0]; strlen(id->name); id++) {
|
|
if (!strncasecmp(id->name, buf, strlen(id->name)))
|
|
return (int)id->driver_data;
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
chip_id &= LTC2978_ID_MASK;
|
|
|
|
if (chip_id == LTC2974_ID)
|
|
return ltc2974;
|
|
else if (chip_id == LTC2975_ID)
|
|
return ltc2975;
|
|
else if (chip_id == LTC2977_ID)
|
|
return ltc2977;
|
|
else if (chip_id == LTC2978_ID_REV1 || chip_id == LTC2978_ID_REV2)
|
|
return ltc2978;
|
|
else if (chip_id == LTC2980_ID_A || chip_id == LTC2980_ID_B)
|
|
return ltc2980;
|
|
else if (chip_id == LTC3880_ID)
|
|
return ltc3880;
|
|
else if (chip_id == LTC3882_ID || chip_id == LTC3882_ID_D1)
|
|
return ltc3882;
|
|
else if (chip_id == LTC3883_ID)
|
|
return ltc3883;
|
|
else if (chip_id == LTC3886_ID)
|
|
return ltc3886;
|
|
else if (chip_id == LTC3887_ID)
|
|
return ltc3887;
|
|
else if (chip_id == LTM2987_ID_A || chip_id == LTM2987_ID_B)
|
|
return ltm2987;
|
|
else if (chip_id == LTM4675_ID)
|
|
return ltm4675;
|
|
else if (chip_id == LTM4676_ID_REV1 || chip_id == LTM4676_ID_REV2 ||
|
|
chip_id == LTM4676A_ID)
|
|
return ltm4676;
|
|
|
|
dev_err(&client->dev, "Unsupported chip ID 0x%x\n", chip_id);
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int ltc2978_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
int i, chip_id;
|
|
struct ltc2978_data *data;
|
|
struct pmbus_driver_info *info;
|
|
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_READ_WORD_DATA))
|
|
return -ENODEV;
|
|
|
|
data = devm_kzalloc(&client->dev, sizeof(struct ltc2978_data),
|
|
GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
chip_id = ltc2978_get_id(client);
|
|
if (chip_id < 0)
|
|
return chip_id;
|
|
|
|
data->id = chip_id;
|
|
if (data->id != id->driver_data)
|
|
dev_warn(&client->dev,
|
|
"Device mismatch: Configured %s, detected %s\n",
|
|
id->name,
|
|
ltc2978_id[data->id].name);
|
|
|
|
info = &data->info;
|
|
info->write_word_data = ltc2978_write_word_data;
|
|
info->write_byte = ltc_write_byte;
|
|
info->read_word_data = ltc_read_word_data;
|
|
info->read_byte_data = ltc_read_byte_data;
|
|
|
|
data->vin_min = 0x7bff;
|
|
data->vin_max = 0x7c00;
|
|
for (i = 0; i < ARRAY_SIZE(data->vout_min); i++)
|
|
data->vout_min[i] = 0xffff;
|
|
for (i = 0; i < ARRAY_SIZE(data->iout_min); i++)
|
|
data->iout_min[i] = 0xfbff;
|
|
for (i = 0; i < ARRAY_SIZE(data->iout_max); i++)
|
|
data->iout_max[i] = 0x7c00;
|
|
for (i = 0; i < ARRAY_SIZE(data->temp_min); i++)
|
|
data->temp_min[i] = 0x7bff;
|
|
for (i = 0; i < ARRAY_SIZE(data->temp_max); i++)
|
|
data->temp_max[i] = 0x7c00;
|
|
data->temp2_max = 0x7c00;
|
|
|
|
switch (data->id) {
|
|
case ltc2974:
|
|
info->read_word_data = ltc2974_read_word_data;
|
|
info->pages = LTC2974_NUM_PAGES;
|
|
info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
|
|
| PMBUS_HAVE_TEMP2;
|
|
for (i = 0; i < info->pages; i++) {
|
|
info->func[i] |= PMBUS_HAVE_VOUT
|
|
| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_POUT
|
|
| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
|
|
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
|
|
}
|
|
break;
|
|
case ltc2975:
|
|
info->read_word_data = ltc2975_read_word_data;
|
|
info->pages = LTC2974_NUM_PAGES;
|
|
info->func[0] = PMBUS_HAVE_IIN | PMBUS_HAVE_PIN
|
|
| PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
|
|
| PMBUS_HAVE_TEMP2;
|
|
for (i = 0; i < info->pages; i++) {
|
|
info->func[i] |= PMBUS_HAVE_VOUT
|
|
| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_POUT
|
|
| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
|
|
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
|
|
}
|
|
break;
|
|
case ltc2977:
|
|
case ltc2978:
|
|
case ltc2980:
|
|
case ltm2987:
|
|
info->read_word_data = ltc2978_read_word_data;
|
|
info->pages = LTC2978_NUM_PAGES;
|
|
info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
|
|
| PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
|
|
| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
|
|
for (i = 1; i < LTC2978_NUM_PAGES; i++) {
|
|
info->func[i] = PMBUS_HAVE_VOUT
|
|
| PMBUS_HAVE_STATUS_VOUT;
|
|
}
|
|
break;
|
|
case ltc3880:
|
|
case ltc3887:
|
|
case ltm4675:
|
|
case ltm4676:
|
|
data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
|
|
info->read_word_data = ltc3880_read_word_data;
|
|
info->pages = LTC3880_NUM_PAGES;
|
|
info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
|
|
| PMBUS_HAVE_STATUS_INPUT
|
|
| PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
|
|
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
|
|
| PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
|
|
| PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
|
|
info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
|
|
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
|
|
| PMBUS_HAVE_POUT
|
|
| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
|
|
break;
|
|
case ltc3882:
|
|
data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
|
|
info->read_word_data = ltc3880_read_word_data;
|
|
info->pages = LTC3880_NUM_PAGES;
|
|
info->func[0] = PMBUS_HAVE_VIN
|
|
| PMBUS_HAVE_STATUS_INPUT
|
|
| PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
|
|
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
|
|
| PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
|
|
| PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
|
|
info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
|
|
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
|
|
| PMBUS_HAVE_POUT
|
|
| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
|
|
break;
|
|
case ltc3883:
|
|
data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
|
|
info->read_word_data = ltc3883_read_word_data;
|
|
info->pages = LTC3883_NUM_PAGES;
|
|
info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
|
|
| PMBUS_HAVE_STATUS_INPUT
|
|
| PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
|
|
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
|
|
| PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
|
|
| PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
|
|
break;
|
|
case ltc3886:
|
|
data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
|
|
info->read_word_data = ltc3883_read_word_data;
|
|
info->pages = LTC3880_NUM_PAGES;
|
|
info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
|
|
| PMBUS_HAVE_STATUS_INPUT
|
|
| PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
|
|
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
|
|
| PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
|
|
| PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
|
|
info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
|
|
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
|
|
| PMBUS_HAVE_POUT
|
|
| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
|
|
#if IS_ENABLED(CONFIG_SENSORS_LTC2978_REGULATOR)
|
|
info->num_regulators = info->pages;
|
|
info->reg_desc = ltc2978_reg_desc;
|
|
if (info->num_regulators > ARRAY_SIZE(ltc2978_reg_desc)) {
|
|
dev_err(&client->dev, "num_regulators too large!");
|
|
info->num_regulators = ARRAY_SIZE(ltc2978_reg_desc);
|
|
}
|
|
#endif
|
|
|
|
return pmbus_do_probe(client, id, info);
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id ltc2978_of_match[] = {
|
|
{ .compatible = "lltc,ltc2974" },
|
|
{ .compatible = "lltc,ltc2975" },
|
|
{ .compatible = "lltc,ltc2977" },
|
|
{ .compatible = "lltc,ltc2978" },
|
|
{ .compatible = "lltc,ltc2980" },
|
|
{ .compatible = "lltc,ltc3880" },
|
|
{ .compatible = "lltc,ltc3882" },
|
|
{ .compatible = "lltc,ltc3883" },
|
|
{ .compatible = "lltc,ltc3886" },
|
|
{ .compatible = "lltc,ltc3887" },
|
|
{ .compatible = "lltc,ltm2987" },
|
|
{ .compatible = "lltc,ltm4675" },
|
|
{ .compatible = "lltc,ltm4676" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ltc2978_of_match);
|
|
#endif
|
|
|
|
static struct i2c_driver ltc2978_driver = {
|
|
.driver = {
|
|
.name = "ltc2978",
|
|
.of_match_table = of_match_ptr(ltc2978_of_match),
|
|
},
|
|
.probe = ltc2978_probe,
|
|
.remove = pmbus_do_remove,
|
|
.id_table = ltc2978_id,
|
|
};
|
|
|
|
module_i2c_driver(ltc2978_driver);
|
|
|
|
MODULE_AUTHOR("Guenter Roeck");
|
|
MODULE_DESCRIPTION("PMBus driver for LTC2978 and comppatible chips");
|
|
MODULE_LICENSE("GPL");
|