634 lines
16 KiB
C
634 lines
16 KiB
C
/*
|
|
* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/types.h>
|
|
#include <linux/init.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mfd/mc13783.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/l4f00242t03.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/usb/ulpi.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/time.h>
|
|
#include <asm/memory.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include "3ds_debugboard.h"
|
|
#include "common.h"
|
|
#include "devices-imx31.h"
|
|
#include "ehci.h"
|
|
#include "hardware.h"
|
|
#include "iomux-mx3.h"
|
|
#include "ulpi.h"
|
|
|
|
static int mx31_3ds_pins[] = {
|
|
/* UART1 */
|
|
MX31_PIN_CTS1__CTS1,
|
|
MX31_PIN_RTS1__RTS1,
|
|
MX31_PIN_TXD1__TXD1,
|
|
MX31_PIN_RXD1__RXD1,
|
|
IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
|
|
/*SPI0*/
|
|
IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_ALT1),
|
|
IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_ALT1),
|
|
/* SPI 1 */
|
|
MX31_PIN_CSPI2_SCLK__SCLK,
|
|
MX31_PIN_CSPI2_MOSI__MOSI,
|
|
MX31_PIN_CSPI2_MISO__MISO,
|
|
MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
|
|
MX31_PIN_CSPI2_SS0__SS0,
|
|
MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */
|
|
/* MC13783 IRQ */
|
|
IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO),
|
|
/* USB OTG reset */
|
|
IOMUX_MODE(MX31_PIN_USB_PWR, IOMUX_CONFIG_GPIO),
|
|
/* USB OTG */
|
|
MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
|
|
MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
|
|
MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
|
|
MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
|
|
MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
|
|
MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
|
|
MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
|
|
MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
|
|
MX31_PIN_USBOTG_CLK__USBOTG_CLK,
|
|
MX31_PIN_USBOTG_DIR__USBOTG_DIR,
|
|
MX31_PIN_USBOTG_NXT__USBOTG_NXT,
|
|
MX31_PIN_USBOTG_STP__USBOTG_STP,
|
|
/*Keyboard*/
|
|
MX31_PIN_KEY_ROW0_KEY_ROW0,
|
|
MX31_PIN_KEY_ROW1_KEY_ROW1,
|
|
MX31_PIN_KEY_ROW2_KEY_ROW2,
|
|
MX31_PIN_KEY_COL0_KEY_COL0,
|
|
MX31_PIN_KEY_COL1_KEY_COL1,
|
|
MX31_PIN_KEY_COL2_KEY_COL2,
|
|
MX31_PIN_KEY_COL3_KEY_COL3,
|
|
/* USB Host 2 */
|
|
IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
|
|
IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
|
|
IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
|
|
IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
|
|
IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
|
|
IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
|
|
IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT1),
|
|
IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT1),
|
|
IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT1),
|
|
IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT1),
|
|
IOMUX_MODE(MX31_PIN_IOIS16, IOMUX_CONFIG_ALT1),
|
|
IOMUX_MODE(MX31_PIN_PC_RW_B, IOMUX_CONFIG_ALT1),
|
|
/* USB Host2 reset */
|
|
IOMUX_MODE(MX31_PIN_USB_BYP, IOMUX_CONFIG_GPIO),
|
|
/* I2C1 */
|
|
MX31_PIN_I2C_CLK__I2C1_SCL,
|
|
MX31_PIN_I2C_DAT__I2C1_SDA,
|
|
/* SDHC1 */
|
|
MX31_PIN_SD1_DATA3__SD1_DATA3,
|
|
MX31_PIN_SD1_DATA2__SD1_DATA2,
|
|
MX31_PIN_SD1_DATA1__SD1_DATA1,
|
|
MX31_PIN_SD1_DATA0__SD1_DATA0,
|
|
MX31_PIN_SD1_CLK__SD1_CLK,
|
|
MX31_PIN_SD1_CMD__SD1_CMD,
|
|
MX31_PIN_GPIO3_1__GPIO3_1, /* Card detect */
|
|
MX31_PIN_GPIO3_0__GPIO3_0, /* OE */
|
|
/* Framebuffer */
|
|
MX31_PIN_LD0__LD0,
|
|
MX31_PIN_LD1__LD1,
|
|
MX31_PIN_LD2__LD2,
|
|
MX31_PIN_LD3__LD3,
|
|
MX31_PIN_LD4__LD4,
|
|
MX31_PIN_LD5__LD5,
|
|
MX31_PIN_LD6__LD6,
|
|
MX31_PIN_LD7__LD7,
|
|
MX31_PIN_LD8__LD8,
|
|
MX31_PIN_LD9__LD9,
|
|
MX31_PIN_LD10__LD10,
|
|
MX31_PIN_LD11__LD11,
|
|
MX31_PIN_LD12__LD12,
|
|
MX31_PIN_LD13__LD13,
|
|
MX31_PIN_LD14__LD14,
|
|
MX31_PIN_LD15__LD15,
|
|
MX31_PIN_LD16__LD16,
|
|
MX31_PIN_LD17__LD17,
|
|
MX31_PIN_VSYNC3__VSYNC3,
|
|
MX31_PIN_HSYNC__HSYNC,
|
|
MX31_PIN_FPSHIFT__FPSHIFT,
|
|
MX31_PIN_CONTRAST__CONTRAST,
|
|
/* SSI */
|
|
MX31_PIN_STXD4__STXD4,
|
|
MX31_PIN_SRXD4__SRXD4,
|
|
MX31_PIN_SCK4__SCK4,
|
|
MX31_PIN_SFS4__SFS4,
|
|
};
|
|
|
|
/*
|
|
* FB support
|
|
*/
|
|
static const struct fb_videomode fb_modedb[] = {
|
|
{ /* 480x640 @ 60 Hz */
|
|
.name = "Epson-VGA",
|
|
.refresh = 60,
|
|
.xres = 480,
|
|
.yres = 640,
|
|
.pixclock = 41701,
|
|
.left_margin = 20,
|
|
.right_margin = 41,
|
|
.upper_margin = 10,
|
|
.lower_margin = 5,
|
|
.hsync_len = 20,
|
|
.vsync_len = 10,
|
|
.sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
|
|
.vmode = FB_VMODE_NONINTERLACED,
|
|
.flag = 0,
|
|
},
|
|
};
|
|
|
|
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
|
|
.name = "Epson-VGA",
|
|
.mode = fb_modedb,
|
|
.num_modes = ARRAY_SIZE(fb_modedb),
|
|
};
|
|
|
|
/* LCD */
|
|
static struct l4f00242t03_pdata mx31_3ds_l4f00242t03_pdata = {
|
|
.reset_gpio = IOMUX_TO_GPIO(MX31_PIN_LCS1),
|
|
.data_enable_gpio = IOMUX_TO_GPIO(MX31_PIN_SER_RS),
|
|
};
|
|
|
|
/*
|
|
* Support for SD card slot in personality board
|
|
*/
|
|
#define MX31_3DS_GPIO_SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
|
|
#define MX31_3DS_GPIO_SDHC1_BE IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
|
|
|
|
static struct gpio mx31_3ds_sdhc1_gpios[] = {
|
|
{ MX31_3DS_GPIO_SDHC1_CD, GPIOF_IN, "sdhc1-card-detect" },
|
|
{ MX31_3DS_GPIO_SDHC1_BE, GPIOF_OUT_INIT_LOW, "sdhc1-bus-en" },
|
|
};
|
|
|
|
static int mx31_3ds_sdhc1_init(struct device *dev,
|
|
irq_handler_t detect_irq,
|
|
void *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = gpio_request_array(mx31_3ds_sdhc1_gpios,
|
|
ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
|
|
if (ret) {
|
|
pr_warn("Unable to request the SD/MMC GPIOs.\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)),
|
|
detect_irq,
|
|
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
|
|
"sdhc1-detect", data);
|
|
if (ret) {
|
|
pr_warn("Unable to request the SD/MMC card-detect IRQ.\n");
|
|
goto gpio_free;
|
|
}
|
|
|
|
return 0;
|
|
|
|
gpio_free:
|
|
gpio_free_array(mx31_3ds_sdhc1_gpios,
|
|
ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
|
|
return ret;
|
|
}
|
|
|
|
static void mx31_3ds_sdhc1_exit(struct device *dev, void *data)
|
|
{
|
|
free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), data);
|
|
gpio_free_array(mx31_3ds_sdhc1_gpios,
|
|
ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
|
|
}
|
|
|
|
static void mx31_3ds_sdhc1_setpower(struct device *dev, unsigned int vdd)
|
|
{
|
|
/*
|
|
* While the voltage stuff is done by the driver, activate the
|
|
* Buffer Enable Pin only if there is a card in slot to fix the card
|
|
* voltage issue caused by bi-directional chip TXB0108 on 3Stack.
|
|
* Done here because at this stage we have for sure a debounced value
|
|
* of the presence of the card, showed by the value of vdd.
|
|
* 7 == ilog2(MMC_VDD_165_195)
|
|
*/
|
|
if (vdd > 7)
|
|
gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 1);
|
|
else
|
|
gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 0);
|
|
}
|
|
|
|
static struct imxmmc_platform_data sdhc1_pdata = {
|
|
.init = mx31_3ds_sdhc1_init,
|
|
.exit = mx31_3ds_sdhc1_exit,
|
|
.setpower = mx31_3ds_sdhc1_setpower,
|
|
};
|
|
|
|
/*
|
|
* Matrix keyboard
|
|
*/
|
|
|
|
static const uint32_t mx31_3ds_keymap[] = {
|
|
KEY(0, 0, KEY_UP),
|
|
KEY(0, 1, KEY_DOWN),
|
|
KEY(1, 0, KEY_RIGHT),
|
|
KEY(1, 1, KEY_LEFT),
|
|
KEY(1, 2, KEY_ENTER),
|
|
KEY(2, 0, KEY_F6),
|
|
KEY(2, 1, KEY_F8),
|
|
KEY(2, 2, KEY_F9),
|
|
KEY(2, 3, KEY_F10),
|
|
};
|
|
|
|
static const struct matrix_keymap_data mx31_3ds_keymap_data __initconst = {
|
|
.keymap = mx31_3ds_keymap,
|
|
.keymap_size = ARRAY_SIZE(mx31_3ds_keymap),
|
|
};
|
|
|
|
/* Regulators */
|
|
static struct regulator_init_data pwgtx_init = {
|
|
.constraints = {
|
|
.boot_on = 1,
|
|
.always_on = 1,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data gpo_init = {
|
|
.constraints = {
|
|
.boot_on = 1,
|
|
.always_on = 1,
|
|
}
|
|
};
|
|
|
|
static struct regulator_consumer_supply vmmc2_consumers[] = {
|
|
REGULATOR_SUPPLY("vmmc", "imx31-mmc.0"),
|
|
};
|
|
|
|
static struct regulator_init_data vmmc2_init = {
|
|
.constraints = {
|
|
.min_uV = 3000000,
|
|
.max_uV = 3000000,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
|
|
REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(vmmc2_consumers),
|
|
.consumer_supplies = vmmc2_consumers,
|
|
};
|
|
|
|
static struct regulator_consumer_supply vmmc1_consumers[] = {
|
|
REGULATOR_SUPPLY("vcore", "spi0.0"),
|
|
};
|
|
|
|
static struct regulator_init_data vmmc1_init = {
|
|
.constraints = {
|
|
.min_uV = 2800000,
|
|
.max_uV = 2800000,
|
|
.apply_uV = 1,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
|
|
REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
|
|
.consumer_supplies = vmmc1_consumers,
|
|
};
|
|
|
|
static struct regulator_consumer_supply vgen_consumers[] = {
|
|
REGULATOR_SUPPLY("vdd", "spi0.0"),
|
|
};
|
|
|
|
static struct regulator_init_data vgen_init = {
|
|
.constraints = {
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.apply_uV = 1,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
|
|
REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(vgen_consumers),
|
|
.consumer_supplies = vgen_consumers,
|
|
};
|
|
|
|
static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = {
|
|
{
|
|
.id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */
|
|
.init_data = &pwgtx_init,
|
|
}, {
|
|
.id = MC13783_REG_PWGT2SPI, /* Power Gate for L2 Cache. */
|
|
.init_data = &pwgtx_init,
|
|
}, {
|
|
|
|
.id = MC13783_REG_GPO1, /* Turn on 1.8V */
|
|
.init_data = &gpo_init,
|
|
}, {
|
|
.id = MC13783_REG_GPO3, /* Turn on 3.3V */
|
|
.init_data = &gpo_init,
|
|
}, {
|
|
.id = MC13783_REG_VMMC2, /* Power MMC/SD, WiFi/Bluetooth. */
|
|
.init_data = &vmmc2_init,
|
|
}, {
|
|
.id = MC13783_REG_VMMC1, /* Power LCD, CMOS, FM, GPS, Accel. */
|
|
.init_data = &vmmc1_init,
|
|
}, {
|
|
.id = MC13783_REG_VGEN, /* Power LCD */
|
|
.init_data = &vgen_init,
|
|
},
|
|
};
|
|
|
|
/* MC13783 */
|
|
static struct mc13xxx_codec_platform_data mx31_3ds_codec = {
|
|
.dac_ssi_port = MC13783_SSI1_PORT,
|
|
.adc_ssi_port = MC13783_SSI1_PORT,
|
|
};
|
|
|
|
static struct mc13xxx_platform_data mc13783_pdata = {
|
|
.regulators = {
|
|
.regulators = mx31_3ds_regulators,
|
|
.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
|
|
},
|
|
.codec = &mx31_3ds_codec,
|
|
.flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC | MC13XXX_USE_CODEC,
|
|
|
|
};
|
|
|
|
static struct imx_ssi_platform_data mx31_3ds_ssi_pdata = {
|
|
.flags = IMX_SSI_DMA | IMX_SSI_NET,
|
|
};
|
|
|
|
/* SPI */
|
|
static int spi0_internal_chipselect[] = {
|
|
MXC_SPI_CS(0),
|
|
MXC_SPI_CS(1),
|
|
MXC_SPI_CS(2),
|
|
};
|
|
|
|
static const struct spi_imx_master spi0_pdata __initconst = {
|
|
.chipselect = spi0_internal_chipselect,
|
|
.num_chipselect = ARRAY_SIZE(spi0_internal_chipselect),
|
|
};
|
|
|
|
static int spi1_internal_chipselect[] = {
|
|
MXC_SPI_CS(0),
|
|
MXC_SPI_CS(1),
|
|
MXC_SPI_CS(2),
|
|
};
|
|
|
|
static const struct spi_imx_master spi1_pdata __initconst = {
|
|
.chipselect = spi1_internal_chipselect,
|
|
.num_chipselect = ARRAY_SIZE(spi1_internal_chipselect),
|
|
};
|
|
|
|
static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
|
|
{
|
|
.modalias = "mc13783",
|
|
.max_speed_hz = 1000000,
|
|
.bus_num = 1,
|
|
.chip_select = 2, /* SS2 */
|
|
.platform_data = &mc13783_pdata,
|
|
/* irq number is run-time assigned */
|
|
.mode = SPI_CS_HIGH,
|
|
}, {
|
|
.modalias = "l4f00242t03",
|
|
.max_speed_hz = 5000000,
|
|
.bus_num = 0,
|
|
.chip_select = 2, /* SS2 */
|
|
.platform_data = &mx31_3ds_l4f00242t03_pdata,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* NAND Flash
|
|
*/
|
|
static const struct mxc_nand_platform_data
|
|
mx31_3ds_nand_board_info __initconst = {
|
|
.width = 1,
|
|
.hw_ecc = 1,
|
|
#ifdef CONFIG_MACH_MX31_3DS_MXC_NAND_USE_BBT
|
|
.flash_bbt = 1,
|
|
#endif
|
|
};
|
|
|
|
/*
|
|
* USB OTG
|
|
*/
|
|
|
|
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
|
|
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
|
|
|
|
#define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR)
|
|
#define USBH2_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_BYP)
|
|
|
|
static int mx31_3ds_usbotg_init(void)
|
|
{
|
|
int err;
|
|
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
|
|
|
|
err = gpio_request(USBOTG_RST_B, "otgusb-reset");
|
|
if (err) {
|
|
pr_err("Failed to request the USB OTG reset gpio\n");
|
|
return err;
|
|
}
|
|
|
|
err = gpio_direction_output(USBOTG_RST_B, 0);
|
|
if (err) {
|
|
pr_err("Failed to drive the USB OTG reset gpio\n");
|
|
goto usbotg_free_reset;
|
|
}
|
|
|
|
mdelay(1);
|
|
gpio_set_value(USBOTG_RST_B, 1);
|
|
return 0;
|
|
|
|
usbotg_free_reset:
|
|
gpio_free(USBOTG_RST_B);
|
|
return err;
|
|
}
|
|
|
|
static int mx31_3ds_otg_init(struct platform_device *pdev)
|
|
{
|
|
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
|
|
}
|
|
|
|
static int mx31_3ds_host2_init(struct platform_device *pdev)
|
|
{
|
|
int err;
|
|
|
|
mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_PC_VS2, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_PC_BVD1, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_PC_BVD2, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_PC_RST, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_IOIS16, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_PC_RW_B, USB_PAD_CFG);
|
|
|
|
err = gpio_request(USBH2_RST_B, "usbh2-reset");
|
|
if (err) {
|
|
pr_err("Failed to request the USB Host 2 reset gpio\n");
|
|
return err;
|
|
}
|
|
|
|
err = gpio_direction_output(USBH2_RST_B, 0);
|
|
if (err) {
|
|
pr_err("Failed to drive the USB Host 2 reset gpio\n");
|
|
goto usbotg_free_reset;
|
|
}
|
|
|
|
mdelay(1);
|
|
gpio_set_value(USBH2_RST_B, 1);
|
|
|
|
mdelay(10);
|
|
|
|
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
|
|
|
|
usbotg_free_reset:
|
|
gpio_free(USBH2_RST_B);
|
|
return err;
|
|
}
|
|
|
|
static struct mxc_usbh_platform_data otg_pdata __initdata = {
|
|
.init = mx31_3ds_otg_init,
|
|
.portsc = MXC_EHCI_MODE_ULPI,
|
|
};
|
|
|
|
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
|
|
.init = mx31_3ds_host2_init,
|
|
.portsc = MXC_EHCI_MODE_ULPI,
|
|
};
|
|
|
|
static const struct fsl_usb2_platform_data usbotg_pdata __initconst = {
|
|
.operating_mode = FSL_USB2_DR_DEVICE,
|
|
.phy_mode = FSL_USB2_PHY_ULPI,
|
|
};
|
|
|
|
static bool otg_mode_host __initdata;
|
|
|
|
static int __init mx31_3ds_otg_mode(char *options)
|
|
{
|
|
if (!strcmp(options, "host"))
|
|
otg_mode_host = true;
|
|
else if (!strcmp(options, "device"))
|
|
otg_mode_host = false;
|
|
else
|
|
pr_info("otg_mode neither \"host\" nor \"device\". "
|
|
"Defaulting to device\n");
|
|
return 1;
|
|
}
|
|
__setup("otg_mode=", mx31_3ds_otg_mode);
|
|
|
|
static const struct imxuart_platform_data uart_pdata __initconst = {
|
|
.flags = IMXUART_HAVE_RTSCTS,
|
|
};
|
|
|
|
static const struct imxi2c_platform_data mx31_3ds_i2c0_data __initconst = {
|
|
.bitrate = 100000,
|
|
};
|
|
|
|
static void __init mx31_3ds_init(void)
|
|
{
|
|
imx31_soc_init();
|
|
|
|
/* Configure SPI1 IOMUX */
|
|
mxc_iomux_set_gpr(MUX_PGP_CSPI_BB, true);
|
|
|
|
mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
|
|
"mx31_3ds");
|
|
|
|
imx31_add_imx_uart0(&uart_pdata);
|
|
imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
|
|
|
|
imx31_add_spi_imx1(&spi1_pdata);
|
|
|
|
imx31_add_imx_keypad(&mx31_3ds_keymap_data);
|
|
|
|
imx31_add_imx2_wdt();
|
|
imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
|
|
|
|
imx31_add_spi_imx0(&spi0_pdata);
|
|
imx31_add_ipu_core();
|
|
imx31_add_mx3_sdc_fb(&mx3fb_pdata);
|
|
|
|
imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata);
|
|
|
|
imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
|
|
}
|
|
|
|
static void __init mx31_3ds_late(void)
|
|
{
|
|
mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
|
|
spi_register_board_info(mx31_3ds_spi_devs,
|
|
ARRAY_SIZE(mx31_3ds_spi_devs));
|
|
|
|
mx31_3ds_usbotg_init();
|
|
if (otg_mode_host) {
|
|
otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
|
|
ULPI_OTG_DRVVBUS_EXT);
|
|
if (otg_pdata.otg)
|
|
imx31_add_mxc_ehci_otg(&otg_pdata);
|
|
}
|
|
usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
|
|
ULPI_OTG_DRVVBUS_EXT);
|
|
if (usbh2_pdata.otg)
|
|
imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
|
|
|
|
if (!otg_mode_host)
|
|
imx31_add_fsl_usb2_udc(&usbotg_pdata);
|
|
|
|
if (mxc_expio_init(MX31_CS5_BASE_ADDR, IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)))
|
|
printk(KERN_WARNING "Init of the debug board failed, all "
|
|
"devices on the debug board are unusable.\n");
|
|
|
|
imx31_add_mxc_mmc(0, &sdhc1_pdata);
|
|
}
|
|
|
|
static void __init mx31_3ds_timer_init(void)
|
|
{
|
|
mx31_clocks_init(26000000);
|
|
}
|
|
|
|
MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
|
|
/* Maintainer: Freescale Semiconductor, Inc. */
|
|
.atag_offset = 0x100,
|
|
.map_io = mx31_map_io,
|
|
.init_early = imx31_init_early,
|
|
.init_irq = mx31_init_irq,
|
|
.init_time = mx31_3ds_timer_init,
|
|
.init_machine = mx31_3ds_init,
|
|
.init_late = mx31_3ds_late,
|
|
.restart = mxc_restart,
|
|
MACHINE_END
|