44 lines
1.5 KiB
Plaintext
44 lines
1.5 KiB
Plaintext
MediaTek display PWM controller
|
|
|
|
Required properties:
|
|
- compatible: should be "mediatek,<name>-disp-pwm":
|
|
- "mediatek,mt2701-disp-pwm": found on mt2701 SoC.
|
|
- "mediatek,mt6595-disp-pwm": found on mt6595 SoC.
|
|
- "mediatek,mt8173-disp-pwm": found on mt8173 SoC.
|
|
- reg: physical base address and length of the controller's registers.
|
|
- #pwm-cells: must be 2. See pwm.txt in this directory for a description of
|
|
the cell format.
|
|
- clocks: phandle and clock specifier of the PWM reference clock.
|
|
- clock-names: must contain the following:
|
|
- "main": clock used to generate PWM signals.
|
|
- "mm": sync signals from the modules of mmsys.
|
|
- pinctrl-names: Must contain a "default" entry.
|
|
- pinctrl-0: One property must exist for each entry in pinctrl-names.
|
|
See pinctrl/pinctrl-bindings.txt for details of the property values.
|
|
|
|
Example:
|
|
pwm0: pwm@1401e000 {
|
|
compatible = "mediatek,mt8173-disp-pwm",
|
|
"mediatek,mt6595-disp-pwm";
|
|
reg = <0 0x1401e000 0 0x1000>;
|
|
#pwm-cells = <2>;
|
|
clocks = <&mmsys CLK_MM_DISP_PWM026M>,
|
|
<&mmsys CLK_MM_DISP_PWM0MM>;
|
|
clock-names = "main", "mm";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&disp_pwm0_pins>;
|
|
};
|
|
|
|
backlight_lcd: backlight_lcd {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm0 0 1000000>;
|
|
brightness-levels = <
|
|
0 16 32 48 64 80 96 112
|
|
128 144 160 176 192 208 224 240
|
|
255
|
|
>;
|
|
default-brightness-level = <9>;
|
|
power-supply = <&mt6397_vio18_reg>;
|
|
enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>;
|
|
};
|