765 lines
19 KiB
C
765 lines
19 KiB
C
/*
|
|
*
|
|
* Copyright (c) 2009 Nuvoton technology corporation
|
|
* All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* Description:
|
|
* Nuvoton LCD Controller Driver
|
|
* Author:
|
|
* Wang Qiang (rurality.linux@gmail.com) 2009/12/11
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/err.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/string.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/init.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/io.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/device.h>
|
|
|
|
#include <mach/map.h>
|
|
#include <mach/regs-clock.h>
|
|
#include <mach/regs-ldm.h>
|
|
#include <linux/platform_data/video-nuc900fb.h>
|
|
|
|
#include "nuc900fb.h"
|
|
|
|
|
|
/*
|
|
* Initialize the nuc900 video (dual) buffer address
|
|
*/
|
|
static void nuc900fb_set_lcdaddr(struct fb_info *info)
|
|
{
|
|
struct nuc900fb_info *fbi = info->par;
|
|
void __iomem *regs = fbi->io;
|
|
unsigned long vbaddr1, vbaddr2;
|
|
|
|
vbaddr1 = info->fix.smem_start;
|
|
vbaddr2 = info->fix.smem_start;
|
|
vbaddr2 += info->fix.line_length * info->var.yres;
|
|
|
|
/* set frambuffer start phy addr*/
|
|
writel(vbaddr1, regs + REG_LCM_VA_BADDR0);
|
|
writel(vbaddr2, regs + REG_LCM_VA_BADDR1);
|
|
|
|
writel(fbi->regs.lcd_va_fbctrl, regs + REG_LCM_VA_FBCTRL);
|
|
writel(fbi->regs.lcd_va_scale, regs + REG_LCM_VA_SCALE);
|
|
}
|
|
|
|
/*
|
|
* calculate divider for lcd div
|
|
*/
|
|
static unsigned int nuc900fb_calc_pixclk(struct nuc900fb_info *fbi,
|
|
unsigned long pixclk)
|
|
{
|
|
unsigned long clk = fbi->clk_rate;
|
|
unsigned long long div;
|
|
|
|
/* pixclk is in picseconds. our clock is in Hz*/
|
|
/* div = (clk * pixclk)/10^12 */
|
|
div = (unsigned long long)clk * pixclk;
|
|
div >>= 12;
|
|
do_div(div, 625 * 625UL * 625);
|
|
|
|
dev_dbg(fbi->dev, "pixclk %ld, divisor is %lld\n", pixclk, div);
|
|
|
|
return div;
|
|
}
|
|
|
|
/*
|
|
* Check the video params of 'var'.
|
|
*/
|
|
static int nuc900fb_check_var(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
struct nuc900fb_info *fbi = info->par;
|
|
struct nuc900fb_mach_info *mach_info = dev_get_platdata(fbi->dev);
|
|
struct nuc900fb_display *display = NULL;
|
|
struct nuc900fb_display *default_display = mach_info->displays +
|
|
mach_info->default_display;
|
|
int i;
|
|
|
|
dev_dbg(fbi->dev, "check_var(var=%p, info=%p)\n", var, info);
|
|
|
|
/* validate x/y resolution */
|
|
/* choose default mode if possible */
|
|
if (var->xres == default_display->xres &&
|
|
var->yres == default_display->yres &&
|
|
var->bits_per_pixel == default_display->bpp)
|
|
display = default_display;
|
|
else
|
|
for (i = 0; i < mach_info->num_displays; i++)
|
|
if (var->xres == mach_info->displays[i].xres &&
|
|
var->yres == mach_info->displays[i].yres &&
|
|
var->bits_per_pixel == mach_info->displays[i].bpp) {
|
|
display = mach_info->displays + i;
|
|
break;
|
|
}
|
|
|
|
if (display == NULL) {
|
|
printk(KERN_ERR "wrong resolution or depth %dx%d at %d bit per pixel\n",
|
|
var->xres, var->yres, var->bits_per_pixel);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* it should be the same size as the display */
|
|
var->xres_virtual = display->xres;
|
|
var->yres_virtual = display->yres;
|
|
var->height = display->height;
|
|
var->width = display->width;
|
|
|
|
/* copy lcd settings */
|
|
var->pixclock = display->pixclock;
|
|
var->left_margin = display->left_margin;
|
|
var->right_margin = display->right_margin;
|
|
var->upper_margin = display->upper_margin;
|
|
var->lower_margin = display->lower_margin;
|
|
var->vsync_len = display->vsync_len;
|
|
var->hsync_len = display->hsync_len;
|
|
|
|
var->transp.offset = 0;
|
|
var->transp.length = 0;
|
|
|
|
fbi->regs.lcd_dccs = display->dccs;
|
|
fbi->regs.lcd_device_ctrl = display->devctl;
|
|
fbi->regs.lcd_va_fbctrl = display->fbctrl;
|
|
fbi->regs.lcd_va_scale = display->scale;
|
|
|
|
/* set R/G/B possions */
|
|
switch (var->bits_per_pixel) {
|
|
case 1:
|
|
case 2:
|
|
case 4:
|
|
case 8:
|
|
default:
|
|
var->red.offset = 0;
|
|
var->red.length = var->bits_per_pixel;
|
|
var->green = var->red;
|
|
var->blue = var->red;
|
|
break;
|
|
case 12:
|
|
var->red.length = 4;
|
|
var->green.length = 4;
|
|
var->blue.length = 4;
|
|
var->red.offset = 8;
|
|
var->green.offset = 4;
|
|
var->blue.offset = 0;
|
|
break;
|
|
case 16:
|
|
var->red.length = 5;
|
|
var->green.length = 6;
|
|
var->blue.length = 5;
|
|
var->red.offset = 11;
|
|
var->green.offset = 5;
|
|
var->blue.offset = 0;
|
|
break;
|
|
case 18:
|
|
var->red.length = 6;
|
|
var->green.length = 6;
|
|
var->blue.length = 6;
|
|
var->red.offset = 12;
|
|
var->green.offset = 6;
|
|
var->blue.offset = 0;
|
|
break;
|
|
case 32:
|
|
var->red.length = 8;
|
|
var->green.length = 8;
|
|
var->blue.length = 8;
|
|
var->red.offset = 16;
|
|
var->green.offset = 8;
|
|
var->blue.offset = 0;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Calculate lcd register values from var setting & save into hw
|
|
*/
|
|
static void nuc900fb_calculate_lcd_regs(const struct fb_info *info,
|
|
struct nuc900fb_hw *regs)
|
|
{
|
|
const struct fb_var_screeninfo *var = &info->var;
|
|
int vtt = var->height + var->upper_margin + var->lower_margin;
|
|
int htt = var->width + var->left_margin + var->right_margin;
|
|
int hsync = var->width + var->right_margin;
|
|
int vsync = var->height + var->lower_margin;
|
|
|
|
regs->lcd_crtc_size = LCM_CRTC_SIZE_VTTVAL(vtt) |
|
|
LCM_CRTC_SIZE_HTTVAL(htt);
|
|
regs->lcd_crtc_dend = LCM_CRTC_DEND_VDENDVAL(var->height) |
|
|
LCM_CRTC_DEND_HDENDVAL(var->width);
|
|
regs->lcd_crtc_hr = LCM_CRTC_HR_EVAL(var->width + 5) |
|
|
LCM_CRTC_HR_SVAL(var->width + 1);
|
|
regs->lcd_crtc_hsync = LCM_CRTC_HSYNC_EVAL(hsync + var->hsync_len) |
|
|
LCM_CRTC_HSYNC_SVAL(hsync);
|
|
regs->lcd_crtc_vr = LCM_CRTC_VR_EVAL(vsync + var->vsync_len) |
|
|
LCM_CRTC_VR_SVAL(vsync);
|
|
|
|
}
|
|
|
|
/*
|
|
* Activate (set) the controller from the given framebuffer
|
|
* information
|
|
*/
|
|
static void nuc900fb_activate_var(struct fb_info *info)
|
|
{
|
|
struct nuc900fb_info *fbi = info->par;
|
|
void __iomem *regs = fbi->io;
|
|
struct fb_var_screeninfo *var = &info->var;
|
|
int clkdiv;
|
|
|
|
clkdiv = nuc900fb_calc_pixclk(fbi, var->pixclock) - 1;
|
|
if (clkdiv < 0)
|
|
clkdiv = 0;
|
|
|
|
nuc900fb_calculate_lcd_regs(info, &fbi->regs);
|
|
|
|
/* set the new lcd registers*/
|
|
|
|
dev_dbg(fbi->dev, "new lcd register set:\n");
|
|
dev_dbg(fbi->dev, "dccs = 0x%08x\n", fbi->regs.lcd_dccs);
|
|
dev_dbg(fbi->dev, "dev_ctl = 0x%08x\n", fbi->regs.lcd_device_ctrl);
|
|
dev_dbg(fbi->dev, "crtc_size = 0x%08x\n", fbi->regs.lcd_crtc_size);
|
|
dev_dbg(fbi->dev, "crtc_dend = 0x%08x\n", fbi->regs.lcd_crtc_dend);
|
|
dev_dbg(fbi->dev, "crtc_hr = 0x%08x\n", fbi->regs.lcd_crtc_hr);
|
|
dev_dbg(fbi->dev, "crtc_hsync = 0x%08x\n", fbi->regs.lcd_crtc_hsync);
|
|
dev_dbg(fbi->dev, "crtc_vr = 0x%08x\n", fbi->regs.lcd_crtc_vr);
|
|
|
|
writel(fbi->regs.lcd_device_ctrl, regs + REG_LCM_DEV_CTRL);
|
|
writel(fbi->regs.lcd_crtc_size, regs + REG_LCM_CRTC_SIZE);
|
|
writel(fbi->regs.lcd_crtc_dend, regs + REG_LCM_CRTC_DEND);
|
|
writel(fbi->regs.lcd_crtc_hr, regs + REG_LCM_CRTC_HR);
|
|
writel(fbi->regs.lcd_crtc_hsync, regs + REG_LCM_CRTC_HSYNC);
|
|
writel(fbi->regs.lcd_crtc_vr, regs + REG_LCM_CRTC_VR);
|
|
|
|
/* set lcd address pointers */
|
|
nuc900fb_set_lcdaddr(info);
|
|
|
|
writel(fbi->regs.lcd_dccs, regs + REG_LCM_DCCS);
|
|
}
|
|
|
|
/*
|
|
* Alters the hardware state.
|
|
*
|
|
*/
|
|
static int nuc900fb_set_par(struct fb_info *info)
|
|
{
|
|
struct fb_var_screeninfo *var = &info->var;
|
|
|
|
switch (var->bits_per_pixel) {
|
|
case 32:
|
|
case 24:
|
|
case 18:
|
|
case 16:
|
|
case 12:
|
|
info->fix.visual = FB_VISUAL_TRUECOLOR;
|
|
break;
|
|
case 1:
|
|
info->fix.visual = FB_VISUAL_MONO01;
|
|
break;
|
|
default:
|
|
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
|
|
break;
|
|
}
|
|
|
|
info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
|
|
|
|
/* activate this new configuration */
|
|
nuc900fb_activate_var(info);
|
|
return 0;
|
|
}
|
|
|
|
static inline unsigned int chan_to_field(unsigned int chan,
|
|
struct fb_bitfield *bf)
|
|
{
|
|
chan &= 0xffff;
|
|
chan >>= 16 - bf->length;
|
|
return chan << bf->offset;
|
|
}
|
|
|
|
static int nuc900fb_setcolreg(unsigned regno,
|
|
unsigned red, unsigned green, unsigned blue,
|
|
unsigned transp, struct fb_info *info)
|
|
{
|
|
unsigned int val;
|
|
|
|
switch (info->fix.visual) {
|
|
case FB_VISUAL_TRUECOLOR:
|
|
/* true-colour, use pseuo-palette */
|
|
if (regno < 16) {
|
|
u32 *pal = info->pseudo_palette;
|
|
|
|
val = chan_to_field(red, &info->var.red);
|
|
val |= chan_to_field(green, &info->var.green);
|
|
val |= chan_to_field(blue, &info->var.blue);
|
|
pal[regno] = val;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
return 1; /* unknown type */
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* nuc900fb_blank
|
|
*
|
|
*/
|
|
static int nuc900fb_blank(int blank_mode, struct fb_info *info)
|
|
{
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct fb_ops nuc900fb_ops = {
|
|
.owner = THIS_MODULE,
|
|
.fb_check_var = nuc900fb_check_var,
|
|
.fb_set_par = nuc900fb_set_par,
|
|
.fb_blank = nuc900fb_blank,
|
|
.fb_setcolreg = nuc900fb_setcolreg,
|
|
.fb_fillrect = cfb_fillrect,
|
|
.fb_copyarea = cfb_copyarea,
|
|
.fb_imageblit = cfb_imageblit,
|
|
};
|
|
|
|
|
|
static inline void modify_gpio(void __iomem *reg,
|
|
unsigned long set, unsigned long mask)
|
|
{
|
|
unsigned long tmp;
|
|
tmp = readl(reg) & ~mask;
|
|
writel(tmp | set, reg);
|
|
}
|
|
|
|
/*
|
|
* Initialise LCD-related registers
|
|
*/
|
|
static int nuc900fb_init_registers(struct fb_info *info)
|
|
{
|
|
struct nuc900fb_info *fbi = info->par;
|
|
struct nuc900fb_mach_info *mach_info = dev_get_platdata(fbi->dev);
|
|
void __iomem *regs = fbi->io;
|
|
|
|
/*reset the display engine*/
|
|
writel(0, regs + REG_LCM_DCCS);
|
|
writel(readl(regs + REG_LCM_DCCS) | LCM_DCCS_ENG_RST,
|
|
regs + REG_LCM_DCCS);
|
|
ndelay(100);
|
|
writel(readl(regs + REG_LCM_DCCS) & (~LCM_DCCS_ENG_RST),
|
|
regs + REG_LCM_DCCS);
|
|
ndelay(100);
|
|
|
|
writel(0, regs + REG_LCM_DEV_CTRL);
|
|
|
|
/* config gpio output */
|
|
modify_gpio(W90X900_VA_GPIO + 0x54, mach_info->gpio_dir,
|
|
mach_info->gpio_dir_mask);
|
|
modify_gpio(W90X900_VA_GPIO + 0x58, mach_info->gpio_data,
|
|
mach_info->gpio_data_mask);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Alloc the SDRAM region of NUC900 for the frame buffer.
|
|
* The buffer should be a non-cached, non-buffered, memory region
|
|
* to allow palette and pixel writes without flushing the cache.
|
|
*/
|
|
static int nuc900fb_map_video_memory(struct fb_info *info)
|
|
{
|
|
struct nuc900fb_info *fbi = info->par;
|
|
dma_addr_t map_dma;
|
|
unsigned long map_size = PAGE_ALIGN(info->fix.smem_len);
|
|
|
|
dev_dbg(fbi->dev, "nuc900fb_map_video_memory(fbi=%p) map_size %lu\n",
|
|
fbi, map_size);
|
|
|
|
info->screen_base = dma_alloc_wc(fbi->dev, map_size, &map_dma,
|
|
GFP_KERNEL);
|
|
|
|
if (!info->screen_base)
|
|
return -ENOMEM;
|
|
|
|
memset(info->screen_base, 0x00, map_size);
|
|
info->fix.smem_start = map_dma;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline void nuc900fb_unmap_video_memory(struct fb_info *info)
|
|
{
|
|
struct nuc900fb_info *fbi = info->par;
|
|
dma_free_wc(fbi->dev, PAGE_ALIGN(info->fix.smem_len),
|
|
info->screen_base, info->fix.smem_start);
|
|
}
|
|
|
|
static irqreturn_t nuc900fb_irqhandler(int irq, void *dev_id)
|
|
{
|
|
struct nuc900fb_info *fbi = dev_id;
|
|
void __iomem *regs = fbi->io;
|
|
void __iomem *irq_base = fbi->irq_base;
|
|
unsigned long lcdirq = readl(regs + REG_LCM_INT_CS);
|
|
|
|
if (lcdirq & LCM_INT_CS_DISP_F_STATUS) {
|
|
writel(readl(irq_base) | 1<<30, irq_base);
|
|
|
|
/* wait VA_EN low */
|
|
if ((readl(regs + REG_LCM_DCCS) &
|
|
LCM_DCCS_SINGLE) == LCM_DCCS_SINGLE)
|
|
while ((readl(regs + REG_LCM_DCCS) &
|
|
LCM_DCCS_VA_EN) == LCM_DCCS_VA_EN)
|
|
;
|
|
/* display_out-enable */
|
|
writel(readl(regs + REG_LCM_DCCS) | LCM_DCCS_DISP_OUT_EN,
|
|
regs + REG_LCM_DCCS);
|
|
/* va-enable*/
|
|
writel(readl(regs + REG_LCM_DCCS) | LCM_DCCS_VA_EN,
|
|
regs + REG_LCM_DCCS);
|
|
} else if (lcdirq & LCM_INT_CS_UNDERRUN_INT) {
|
|
writel(readl(irq_base) | LCM_INT_CS_UNDERRUN_INT, irq_base);
|
|
} else if (lcdirq & LCM_INT_CS_BUS_ERROR_INT) {
|
|
writel(readl(irq_base) | LCM_INT_CS_BUS_ERROR_INT, irq_base);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#ifdef CONFIG_CPU_FREQ
|
|
|
|
static int nuc900fb_cpufreq_transition(struct notifier_block *nb,
|
|
unsigned long val, void *data)
|
|
{
|
|
struct nuc900fb_info *info;
|
|
struct fb_info *fbinfo;
|
|
long delta_f;
|
|
info = container_of(nb, struct nuc900fb_info, freq_transition);
|
|
fbinfo = platform_get_drvdata(to_platform_device(info->dev));
|
|
|
|
delta_f = info->clk_rate - clk_get_rate(info->clk);
|
|
|
|
if ((val == CPUFREQ_POSTCHANGE && delta_f > 0) ||
|
|
(val == CPUFREQ_PRECHANGE && delta_f < 0)) {
|
|
info->clk_rate = clk_get_rate(info->clk);
|
|
nuc900fb_activate_var(fbinfo);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int nuc900fb_cpufreq_register(struct nuc900fb_info *fbi)
|
|
{
|
|
fbi->freq_transition.notifier_call = nuc900fb_cpufreq_transition;
|
|
return cpufreq_register_notifier(&fbi->freq_transition,
|
|
CPUFREQ_TRANSITION_NOTIFIER);
|
|
}
|
|
|
|
static inline void nuc900fb_cpufreq_deregister(struct nuc900fb_info *fbi)
|
|
{
|
|
cpufreq_unregister_notifier(&fbi->freq_transition,
|
|
CPUFREQ_TRANSITION_NOTIFIER);
|
|
}
|
|
#else
|
|
static inline int nuc900fb_cpufreq_transition(struct notifier_block *nb,
|
|
unsigned long val, void *data)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int nuc900fb_cpufreq_register(struct nuc900fb_info *fbi)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void nuc900fb_cpufreq_deregister(struct nuc900fb_info *info)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
static char driver_name[] = "nuc900fb";
|
|
|
|
static int nuc900fb_probe(struct platform_device *pdev)
|
|
{
|
|
struct nuc900fb_info *fbi;
|
|
struct nuc900fb_display *display;
|
|
struct fb_info *fbinfo;
|
|
struct nuc900fb_mach_info *mach_info;
|
|
struct resource *res;
|
|
int ret;
|
|
int irq;
|
|
int i;
|
|
int size;
|
|
|
|
dev_dbg(&pdev->dev, "devinit\n");
|
|
mach_info = dev_get_platdata(&pdev->dev);
|
|
if (mach_info == NULL) {
|
|
dev_err(&pdev->dev,
|
|
"no platform data for lcd, cannot attach\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (mach_info->default_display > mach_info->num_displays) {
|
|
dev_err(&pdev->dev,
|
|
"default display No. is %d but only %d displays \n",
|
|
mach_info->default_display, mach_info->num_displays);
|
|
return -EINVAL;
|
|
}
|
|
|
|
|
|
display = mach_info->displays + mach_info->default_display;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
dev_err(&pdev->dev, "no irq for device\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
fbinfo = framebuffer_alloc(sizeof(struct nuc900fb_info), &pdev->dev);
|
|
if (!fbinfo)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, fbinfo);
|
|
|
|
fbi = fbinfo->par;
|
|
fbi->dev = &pdev->dev;
|
|
|
|
#ifdef CONFIG_CPU_NUC950
|
|
fbi->drv_type = LCDDRV_NUC950;
|
|
#endif
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
size = resource_size(res);
|
|
fbi->mem = request_mem_region(res->start, size, pdev->name);
|
|
if (fbi->mem == NULL) {
|
|
dev_err(&pdev->dev, "failed to alloc memory region\n");
|
|
ret = -ENOENT;
|
|
goto free_fb;
|
|
}
|
|
|
|
fbi->io = ioremap(res->start, size);
|
|
if (fbi->io == NULL) {
|
|
dev_err(&pdev->dev, "ioremap() of lcd registers failed\n");
|
|
ret = -ENXIO;
|
|
goto release_mem_region;
|
|
}
|
|
|
|
fbi->irq_base = fbi->io + REG_LCM_INT_CS;
|
|
|
|
|
|
/* Stop the LCD */
|
|
writel(0, fbi->io + REG_LCM_DCCS);
|
|
|
|
/* fill the fbinfo*/
|
|
strcpy(fbinfo->fix.id, driver_name);
|
|
fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
|
|
fbinfo->fix.type_aux = 0;
|
|
fbinfo->fix.xpanstep = 0;
|
|
fbinfo->fix.ypanstep = 0;
|
|
fbinfo->fix.ywrapstep = 0;
|
|
fbinfo->fix.accel = FB_ACCEL_NONE;
|
|
fbinfo->var.nonstd = 0;
|
|
fbinfo->var.activate = FB_ACTIVATE_NOW;
|
|
fbinfo->var.accel_flags = 0;
|
|
fbinfo->var.vmode = FB_VMODE_NONINTERLACED;
|
|
fbinfo->fbops = &nuc900fb_ops;
|
|
fbinfo->flags = FBINFO_FLAG_DEFAULT;
|
|
fbinfo->pseudo_palette = &fbi->pseudo_pal;
|
|
|
|
ret = request_irq(irq, nuc900fb_irqhandler, 0, pdev->name, fbi);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "cannot register irq handler %d -err %d\n",
|
|
irq, ret);
|
|
ret = -EBUSY;
|
|
goto release_regs;
|
|
}
|
|
|
|
fbi->clk = clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(fbi->clk)) {
|
|
printk(KERN_ERR "nuc900-lcd:failed to get lcd clock source\n");
|
|
ret = PTR_ERR(fbi->clk);
|
|
goto release_irq;
|
|
}
|
|
|
|
clk_enable(fbi->clk);
|
|
dev_dbg(&pdev->dev, "got and enabled clock\n");
|
|
|
|
fbi->clk_rate = clk_get_rate(fbi->clk);
|
|
|
|
/* calutate the video buffer size */
|
|
for (i = 0; i < mach_info->num_displays; i++) {
|
|
unsigned long smem_len = mach_info->displays[i].xres;
|
|
smem_len *= mach_info->displays[i].yres;
|
|
smem_len *= mach_info->displays[i].bpp;
|
|
smem_len >>= 3;
|
|
if (fbinfo->fix.smem_len < smem_len)
|
|
fbinfo->fix.smem_len = smem_len;
|
|
}
|
|
|
|
/* Initialize Video Memory */
|
|
ret = nuc900fb_map_video_memory(fbinfo);
|
|
if (ret) {
|
|
printk(KERN_ERR "Failed to allocate video RAM: %x\n", ret);
|
|
goto release_clock;
|
|
}
|
|
|
|
dev_dbg(&pdev->dev, "got video memory\n");
|
|
|
|
fbinfo->var.xres = display->xres;
|
|
fbinfo->var.yres = display->yres;
|
|
fbinfo->var.bits_per_pixel = display->bpp;
|
|
|
|
nuc900fb_init_registers(fbinfo);
|
|
|
|
nuc900fb_check_var(&fbinfo->var, fbinfo);
|
|
|
|
ret = nuc900fb_cpufreq_register(fbi);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed to register cpufreq\n");
|
|
goto free_video_memory;
|
|
}
|
|
|
|
ret = register_framebuffer(fbinfo);
|
|
if (ret) {
|
|
printk(KERN_ERR "failed to register framebuffer device: %d\n",
|
|
ret);
|
|
goto free_cpufreq;
|
|
}
|
|
|
|
fb_info(fbinfo, "%s frame buffer device\n", fbinfo->fix.id);
|
|
|
|
return 0;
|
|
|
|
free_cpufreq:
|
|
nuc900fb_cpufreq_deregister(fbi);
|
|
free_video_memory:
|
|
nuc900fb_unmap_video_memory(fbinfo);
|
|
release_clock:
|
|
clk_disable(fbi->clk);
|
|
clk_put(fbi->clk);
|
|
release_irq:
|
|
free_irq(irq, fbi);
|
|
release_regs:
|
|
iounmap(fbi->io);
|
|
release_mem_region:
|
|
release_mem_region(res->start, size);
|
|
free_fb:
|
|
framebuffer_release(fbinfo);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* shutdown the lcd controller
|
|
*/
|
|
static void nuc900fb_stop_lcd(struct fb_info *info)
|
|
{
|
|
struct nuc900fb_info *fbi = info->par;
|
|
void __iomem *regs = fbi->io;
|
|
|
|
writel((~LCM_DCCS_DISP_INT_EN) | (~LCM_DCCS_VA_EN) | (~LCM_DCCS_OSD_EN),
|
|
regs + REG_LCM_DCCS);
|
|
}
|
|
|
|
/*
|
|
* Cleanup
|
|
*/
|
|
static int nuc900fb_remove(struct platform_device *pdev)
|
|
{
|
|
struct fb_info *fbinfo = platform_get_drvdata(pdev);
|
|
struct nuc900fb_info *fbi = fbinfo->par;
|
|
int irq;
|
|
|
|
nuc900fb_stop_lcd(fbinfo);
|
|
msleep(1);
|
|
|
|
unregister_framebuffer(fbinfo);
|
|
nuc900fb_cpufreq_deregister(fbi);
|
|
nuc900fb_unmap_video_memory(fbinfo);
|
|
|
|
iounmap(fbi->io);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
free_irq(irq, fbi);
|
|
|
|
release_resource(fbi->mem);
|
|
kfree(fbi->mem);
|
|
|
|
framebuffer_release(fbinfo);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
/*
|
|
* suspend and resume support for the lcd controller
|
|
*/
|
|
|
|
static int nuc900fb_suspend(struct platform_device *dev, pm_message_t state)
|
|
{
|
|
struct fb_info *fbinfo = platform_get_drvdata(dev);
|
|
struct nuc900fb_info *info = fbinfo->par;
|
|
|
|
nuc900fb_stop_lcd(fbinfo);
|
|
msleep(1);
|
|
clk_disable(info->clk);
|
|
return 0;
|
|
}
|
|
|
|
static int nuc900fb_resume(struct platform_device *dev)
|
|
{
|
|
struct fb_info *fbinfo = platform_get_drvdata(dev);
|
|
struct nuc900fb_info *fbi = fbinfo->par;
|
|
|
|
printk(KERN_INFO "nuc900fb resume\n");
|
|
|
|
clk_enable(fbi->clk);
|
|
msleep(1);
|
|
|
|
nuc900fb_init_registers(fbinfo);
|
|
nuc900fb_activate_var(fbinfo);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
#define nuc900fb_suspend NULL
|
|
#define nuc900fb_resume NULL
|
|
#endif
|
|
|
|
static struct platform_driver nuc900fb_driver = {
|
|
.probe = nuc900fb_probe,
|
|
.remove = nuc900fb_remove,
|
|
.suspend = nuc900fb_suspend,
|
|
.resume = nuc900fb_resume,
|
|
.driver = {
|
|
.name = "nuc900-lcd",
|
|
},
|
|
};
|
|
|
|
module_platform_driver(nuc900fb_driver);
|
|
|
|
MODULE_DESCRIPTION("Framebuffer driver for the NUC900");
|
|
MODULE_LICENSE("GPL");
|