594 lines
23 KiB
C
594 lines
23 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/****************************************************************************/
|
|
|
|
/*
|
|
* fec.h -- Fast Ethernet Controller for Motorola ColdFire SoC
|
|
* processors.
|
|
*
|
|
* (C) Copyright 2000-2005, Greg Ungerer (gerg@snapgear.com)
|
|
* (C) Copyright 2000-2001, Lineo (www.lineo.com)
|
|
*/
|
|
|
|
/****************************************************************************/
|
|
#ifndef FEC_H
|
|
#define FEC_H
|
|
/****************************************************************************/
|
|
|
|
#include <linux/clocksource.h>
|
|
#include <linux/net_tstamp.h>
|
|
#include <linux/ptp_clock_kernel.h>
|
|
#include <linux/timecounter.h>
|
|
|
|
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
|
|
defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM)
|
|
/*
|
|
* Just figures, Motorola would have to change the offsets for
|
|
* registers in the same peripheral device on different models
|
|
* of the ColdFire!
|
|
*/
|
|
#define FEC_IEVENT 0x004 /* Interrupt event reg */
|
|
#define FEC_IMASK 0x008 /* Interrupt mask reg */
|
|
#define FEC_R_DES_ACTIVE_0 0x010 /* Receive descriptor reg */
|
|
#define FEC_X_DES_ACTIVE_0 0x014 /* Transmit descriptor reg */
|
|
#define FEC_ECNTRL 0x024 /* Ethernet control reg */
|
|
#define FEC_MII_DATA 0x040 /* MII manage frame reg */
|
|
#define FEC_MII_SPEED 0x044 /* MII speed control reg */
|
|
#define FEC_MIB_CTRLSTAT 0x064 /* MIB control/status reg */
|
|
#define FEC_R_CNTRL 0x084 /* Receive control reg */
|
|
#define FEC_X_CNTRL 0x0c4 /* Transmit Control reg */
|
|
#define FEC_ADDR_LOW 0x0e4 /* Low 32bits MAC address */
|
|
#define FEC_ADDR_HIGH 0x0e8 /* High 16bits MAC address */
|
|
#define FEC_OPD 0x0ec /* Opcode + Pause duration */
|
|
#define FEC_TXIC0 0x0f0 /* Tx Interrupt Coalescing for ring 0 */
|
|
#define FEC_TXIC1 0x0f4 /* Tx Interrupt Coalescing for ring 1 */
|
|
#define FEC_TXIC2 0x0f8 /* Tx Interrupt Coalescing for ring 2 */
|
|
#define FEC_RXIC0 0x100 /* Rx Interrupt Coalescing for ring 0 */
|
|
#define FEC_RXIC1 0x104 /* Rx Interrupt Coalescing for ring 1 */
|
|
#define FEC_RXIC2 0x108 /* Rx Interrupt Coalescing for ring 2 */
|
|
#define FEC_HASH_TABLE_HIGH 0x118 /* High 32bits hash table */
|
|
#define FEC_HASH_TABLE_LOW 0x11c /* Low 32bits hash table */
|
|
#define FEC_GRP_HASH_TABLE_HIGH 0x120 /* High 32bits hash table */
|
|
#define FEC_GRP_HASH_TABLE_LOW 0x124 /* Low 32bits hash table */
|
|
#define FEC_X_WMRK 0x144 /* FIFO transmit water mark */
|
|
#define FEC_R_BOUND 0x14c /* FIFO receive bound reg */
|
|
#define FEC_R_FSTART 0x150 /* FIFO receive start reg */
|
|
#define FEC_R_DES_START_1 0x160 /* Receive descriptor ring 1 */
|
|
#define FEC_X_DES_START_1 0x164 /* Transmit descriptor ring 1 */
|
|
#define FEC_R_BUFF_SIZE_1 0x168 /* Maximum receive buff ring1 size */
|
|
#define FEC_R_DES_START_2 0x16c /* Receive descriptor ring 2 */
|
|
#define FEC_X_DES_START_2 0x170 /* Transmit descriptor ring 2 */
|
|
#define FEC_R_BUFF_SIZE_2 0x174 /* Maximum receive buff ring2 size */
|
|
#define FEC_R_DES_START_0 0x180 /* Receive descriptor ring */
|
|
#define FEC_X_DES_START_0 0x184 /* Transmit descriptor ring */
|
|
#define FEC_R_BUFF_SIZE_0 0x188 /* Maximum receive buff size */
|
|
#define FEC_R_FIFO_RSFL 0x190 /* Receive FIFO section full threshold */
|
|
#define FEC_R_FIFO_RSEM 0x194 /* Receive FIFO section empty threshold */
|
|
#define FEC_R_FIFO_RAEM 0x198 /* Receive FIFO almost empty threshold */
|
|
#define FEC_R_FIFO_RAFL 0x19c /* Receive FIFO almost full threshold */
|
|
#define FEC_FTRL 0x1b0 /* Frame truncation receive length*/
|
|
#define FEC_RACC 0x1c4 /* Receive Accelerator function */
|
|
#define FEC_RCMR_1 0x1c8 /* Receive classification match ring 1 */
|
|
#define FEC_RCMR_2 0x1cc /* Receive classification match ring 2 */
|
|
#define FEC_DMA_CFG_1 0x1d8 /* DMA class configuration for ring 1 */
|
|
#define FEC_DMA_CFG_2 0x1dc /* DMA class Configuration for ring 2 */
|
|
#define FEC_R_DES_ACTIVE_1 0x1e0 /* Rx descriptor active for ring 1 */
|
|
#define FEC_X_DES_ACTIVE_1 0x1e4 /* Tx descriptor active for ring 1 */
|
|
#define FEC_R_DES_ACTIVE_2 0x1e8 /* Rx descriptor active for ring 2 */
|
|
#define FEC_X_DES_ACTIVE_2 0x1ec /* Tx descriptor active for ring 2 */
|
|
#define FEC_QOS_SCHEME 0x1f0 /* Set multi queues Qos scheme */
|
|
#define FEC_MIIGSK_CFGR 0x300 /* MIIGSK Configuration reg */
|
|
#define FEC_MIIGSK_ENR 0x308 /* MIIGSK Enable reg */
|
|
|
|
#define BM_MIIGSK_CFGR_MII 0x00
|
|
#define BM_MIIGSK_CFGR_RMII 0x01
|
|
#define BM_MIIGSK_CFGR_FRCONT_10M 0x40
|
|
|
|
#define RMON_T_DROP 0x200 /* Count of frames not cntd correctly */
|
|
#define RMON_T_PACKETS 0x204 /* RMON TX packet count */
|
|
#define RMON_T_BC_PKT 0x208 /* RMON TX broadcast pkts */
|
|
#define RMON_T_MC_PKT 0x20c /* RMON TX multicast pkts */
|
|
#define RMON_T_CRC_ALIGN 0x210 /* RMON TX pkts with CRC align err */
|
|
#define RMON_T_UNDERSIZE 0x214 /* RMON TX pkts < 64 bytes, good CRC */
|
|
#define RMON_T_OVERSIZE 0x218 /* RMON TX pkts > MAX_FL bytes good CRC */
|
|
#define RMON_T_FRAG 0x21c /* RMON TX pkts < 64 bytes, bad CRC */
|
|
#define RMON_T_JAB 0x220 /* RMON TX pkts > MAX_FL bytes, bad CRC */
|
|
#define RMON_T_COL 0x224 /* RMON TX collision count */
|
|
#define RMON_T_P64 0x228 /* RMON TX 64 byte pkts */
|
|
#define RMON_T_P65TO127 0x22c /* RMON TX 65 to 127 byte pkts */
|
|
#define RMON_T_P128TO255 0x230 /* RMON TX 128 to 255 byte pkts */
|
|
#define RMON_T_P256TO511 0x234 /* RMON TX 256 to 511 byte pkts */
|
|
#define RMON_T_P512TO1023 0x238 /* RMON TX 512 to 1023 byte pkts */
|
|
#define RMON_T_P1024TO2047 0x23c /* RMON TX 1024 to 2047 byte pkts */
|
|
#define RMON_T_P_GTE2048 0x240 /* RMON TX pkts > 2048 bytes */
|
|
#define RMON_T_OCTETS 0x244 /* RMON TX octets */
|
|
#define IEEE_T_DROP 0x248 /* Count of frames not counted crtly */
|
|
#define IEEE_T_FRAME_OK 0x24c /* Frames tx'd OK */
|
|
#define IEEE_T_1COL 0x250 /* Frames tx'd with single collision */
|
|
#define IEEE_T_MCOL 0x254 /* Frames tx'd with multiple collision */
|
|
#define IEEE_T_DEF 0x258 /* Frames tx'd after deferral delay */
|
|
#define IEEE_T_LCOL 0x25c /* Frames tx'd with late collision */
|
|
#define IEEE_T_EXCOL 0x260 /* Frames tx'd with excesv collisions */
|
|
#define IEEE_T_MACERR 0x264 /* Frames tx'd with TX FIFO underrun */
|
|
#define IEEE_T_CSERR 0x268 /* Frames tx'd with carrier sense err */
|
|
#define IEEE_T_SQE 0x26c /* Frames tx'd with SQE err */
|
|
#define IEEE_T_FDXFC 0x270 /* Flow control pause frames tx'd */
|
|
#define IEEE_T_OCTETS_OK 0x274 /* Octet count for frames tx'd w/o err */
|
|
#define RMON_R_PACKETS 0x284 /* RMON RX packet count */
|
|
#define RMON_R_BC_PKT 0x288 /* RMON RX broadcast pkts */
|
|
#define RMON_R_MC_PKT 0x28c /* RMON RX multicast pkts */
|
|
#define RMON_R_CRC_ALIGN 0x290 /* RMON RX pkts with CRC alignment err */
|
|
#define RMON_R_UNDERSIZE 0x294 /* RMON RX pkts < 64 bytes, good CRC */
|
|
#define RMON_R_OVERSIZE 0x298 /* RMON RX pkts > MAX_FL bytes good CRC */
|
|
#define RMON_R_FRAG 0x29c /* RMON RX pkts < 64 bytes, bad CRC */
|
|
#define RMON_R_JAB 0x2a0 /* RMON RX pkts > MAX_FL bytes, bad CRC */
|
|
#define RMON_R_RESVD_O 0x2a4 /* Reserved */
|
|
#define RMON_R_P64 0x2a8 /* RMON RX 64 byte pkts */
|
|
#define RMON_R_P65TO127 0x2ac /* RMON RX 65 to 127 byte pkts */
|
|
#define RMON_R_P128TO255 0x2b0 /* RMON RX 128 to 255 byte pkts */
|
|
#define RMON_R_P256TO511 0x2b4 /* RMON RX 256 to 511 byte pkts */
|
|
#define RMON_R_P512TO1023 0x2b8 /* RMON RX 512 to 1023 byte pkts */
|
|
#define RMON_R_P1024TO2047 0x2bc /* RMON RX 1024 to 2047 byte pkts */
|
|
#define RMON_R_P_GTE2048 0x2c0 /* RMON RX pkts > 2048 bytes */
|
|
#define RMON_R_OCTETS 0x2c4 /* RMON RX octets */
|
|
#define IEEE_R_DROP 0x2c8 /* Count frames not counted correctly */
|
|
#define IEEE_R_FRAME_OK 0x2cc /* Frames rx'd OK */
|
|
#define IEEE_R_CRC 0x2d0 /* Frames rx'd with CRC err */
|
|
#define IEEE_R_ALIGN 0x2d4 /* Frames rx'd with alignment err */
|
|
#define IEEE_R_MACERR 0x2d8 /* Receive FIFO overflow count */
|
|
#define IEEE_R_FDXFC 0x2dc /* Flow control pause frames rx'd */
|
|
#define IEEE_R_OCTETS_OK 0x2e0 /* Octet cnt for frames rx'd w/o err */
|
|
|
|
#else
|
|
|
|
#define FEC_ECNTRL 0x000 /* Ethernet control reg */
|
|
#define FEC_IEVENT 0x004 /* Interrupt even reg */
|
|
#define FEC_IMASK 0x008 /* Interrupt mask reg */
|
|
#define FEC_IVEC 0x00c /* Interrupt vec status reg */
|
|
#define FEC_R_DES_ACTIVE_0 0x010 /* Receive descriptor reg */
|
|
#define FEC_R_DES_ACTIVE_1 FEC_R_DES_ACTIVE_0
|
|
#define FEC_R_DES_ACTIVE_2 FEC_R_DES_ACTIVE_0
|
|
#define FEC_X_DES_ACTIVE_0 0x014 /* Transmit descriptor reg */
|
|
#define FEC_X_DES_ACTIVE_1 FEC_X_DES_ACTIVE_0
|
|
#define FEC_X_DES_ACTIVE_2 FEC_X_DES_ACTIVE_0
|
|
#define FEC_MII_DATA 0x040 /* MII manage frame reg */
|
|
#define FEC_MII_SPEED 0x044 /* MII speed control reg */
|
|
#define FEC_R_BOUND 0x08c /* FIFO receive bound reg */
|
|
#define FEC_R_FSTART 0x090 /* FIFO receive start reg */
|
|
#define FEC_X_WMRK 0x0a4 /* FIFO transmit water mark */
|
|
#define FEC_X_FSTART 0x0ac /* FIFO transmit start reg */
|
|
#define FEC_R_CNTRL 0x104 /* Receive control reg */
|
|
#define FEC_MAX_FRM_LEN 0x108 /* Maximum frame length reg */
|
|
#define FEC_X_CNTRL 0x144 /* Transmit Control reg */
|
|
#define FEC_ADDR_LOW 0x3c0 /* Low 32bits MAC address */
|
|
#define FEC_ADDR_HIGH 0x3c4 /* High 16bits MAC address */
|
|
#define FEC_GRP_HASH_TABLE_HIGH 0x3c8 /* High 32bits hash table */
|
|
#define FEC_GRP_HASH_TABLE_LOW 0x3cc /* Low 32bits hash table */
|
|
#define FEC_R_DES_START_0 0x3d0 /* Receive descriptor ring */
|
|
#define FEC_R_DES_START_1 FEC_R_DES_START_0
|
|
#define FEC_R_DES_START_2 FEC_R_DES_START_0
|
|
#define FEC_X_DES_START_0 0x3d4 /* Transmit descriptor ring */
|
|
#define FEC_X_DES_START_1 FEC_X_DES_START_0
|
|
#define FEC_X_DES_START_2 FEC_X_DES_START_0
|
|
#define FEC_R_BUFF_SIZE_0 0x3d8 /* Maximum receive buff size */
|
|
#define FEC_R_BUFF_SIZE_1 FEC_R_BUFF_SIZE_0
|
|
#define FEC_R_BUFF_SIZE_2 FEC_R_BUFF_SIZE_0
|
|
#define FEC_FIFO_RAM 0x400 /* FIFO RAM buffer */
|
|
/* Not existed in real chip
|
|
* Just for pass build.
|
|
*/
|
|
#define FEC_RCMR_1 0xfff
|
|
#define FEC_RCMR_2 0xfff
|
|
#define FEC_DMA_CFG_1 0xfff
|
|
#define FEC_DMA_CFG_2 0xfff
|
|
#define FEC_TXIC0 0xfff
|
|
#define FEC_TXIC1 0xfff
|
|
#define FEC_TXIC2 0xfff
|
|
#define FEC_RXIC0 0xfff
|
|
#define FEC_RXIC1 0xfff
|
|
#define FEC_RXIC2 0xfff
|
|
#endif /* CONFIG_M5272 */
|
|
|
|
|
|
/*
|
|
* Define the buffer descriptor structure.
|
|
*
|
|
* Evidently, ARM SoCs have the FEC block generated in a
|
|
* little endian mode so adjust endianness accordingly.
|
|
*/
|
|
#if defined(CONFIG_ARM)
|
|
#define fec32_to_cpu le32_to_cpu
|
|
#define fec16_to_cpu le16_to_cpu
|
|
#define cpu_to_fec32 cpu_to_le32
|
|
#define cpu_to_fec16 cpu_to_le16
|
|
#define __fec32 __le32
|
|
#define __fec16 __le16
|
|
|
|
struct bufdesc {
|
|
__fec16 cbd_datlen; /* Data length */
|
|
__fec16 cbd_sc; /* Control and status info */
|
|
__fec32 cbd_bufaddr; /* Buffer address */
|
|
};
|
|
#else
|
|
#define fec32_to_cpu be32_to_cpu
|
|
#define fec16_to_cpu be16_to_cpu
|
|
#define cpu_to_fec32 cpu_to_be32
|
|
#define cpu_to_fec16 cpu_to_be16
|
|
#define __fec32 __be32
|
|
#define __fec16 __be16
|
|
|
|
struct bufdesc {
|
|
__fec16 cbd_sc; /* Control and status info */
|
|
__fec16 cbd_datlen; /* Data length */
|
|
__fec32 cbd_bufaddr; /* Buffer address */
|
|
};
|
|
#endif
|
|
|
|
struct bufdesc_ex {
|
|
struct bufdesc desc;
|
|
__fec32 cbd_esc;
|
|
__fec32 cbd_prot;
|
|
__fec32 cbd_bdu;
|
|
__fec32 ts;
|
|
__fec16 res0[4];
|
|
};
|
|
|
|
/*
|
|
* The following definitions courtesy of commproc.h, which where
|
|
* Copyright (c) 1997 Dan Malek (dmalek@jlc.net).
|
|
*/
|
|
#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */
|
|
#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
|
|
#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
|
|
#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
|
|
#define BD_SC_CM ((ushort)0x0200) /* Continuous mode */
|
|
#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
|
|
#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
|
|
#define BD_SC_BR ((ushort)0x0020) /* Break received */
|
|
#define BD_SC_FR ((ushort)0x0010) /* Framing error */
|
|
#define BD_SC_PR ((ushort)0x0008) /* Parity error */
|
|
#define BD_SC_OV ((ushort)0x0002) /* Overrun */
|
|
#define BD_SC_CD ((ushort)0x0001) /* ?? */
|
|
|
|
/* Buffer descriptor control/status used by Ethernet receive.
|
|
*/
|
|
#define BD_ENET_RX_EMPTY ((ushort)0x8000)
|
|
#define BD_ENET_RX_WRAP ((ushort)0x2000)
|
|
#define BD_ENET_RX_INTR ((ushort)0x1000)
|
|
#define BD_ENET_RX_LAST ((ushort)0x0800)
|
|
#define BD_ENET_RX_FIRST ((ushort)0x0400)
|
|
#define BD_ENET_RX_MISS ((ushort)0x0100)
|
|
#define BD_ENET_RX_LG ((ushort)0x0020)
|
|
#define BD_ENET_RX_NO ((ushort)0x0010)
|
|
#define BD_ENET_RX_SH ((ushort)0x0008)
|
|
#define BD_ENET_RX_CR ((ushort)0x0004)
|
|
#define BD_ENET_RX_OV ((ushort)0x0002)
|
|
#define BD_ENET_RX_CL ((ushort)0x0001)
|
|
#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */
|
|
|
|
/* Enhanced buffer descriptor control/status used by Ethernet receive */
|
|
#define BD_ENET_RX_VLAN 0x00000004
|
|
|
|
/* Buffer descriptor control/status used by Ethernet transmit.
|
|
*/
|
|
#define BD_ENET_TX_READY ((ushort)0x8000)
|
|
#define BD_ENET_TX_PAD ((ushort)0x4000)
|
|
#define BD_ENET_TX_WRAP ((ushort)0x2000)
|
|
#define BD_ENET_TX_INTR ((ushort)0x1000)
|
|
#define BD_ENET_TX_LAST ((ushort)0x0800)
|
|
#define BD_ENET_TX_TC ((ushort)0x0400)
|
|
#define BD_ENET_TX_DEF ((ushort)0x0200)
|
|
#define BD_ENET_TX_HB ((ushort)0x0100)
|
|
#define BD_ENET_TX_LC ((ushort)0x0080)
|
|
#define BD_ENET_TX_RL ((ushort)0x0040)
|
|
#define BD_ENET_TX_RCMASK ((ushort)0x003c)
|
|
#define BD_ENET_TX_UN ((ushort)0x0002)
|
|
#define BD_ENET_TX_CSL ((ushort)0x0001)
|
|
#define BD_ENET_TX_STATS ((ushort)0x0fff) /* All status bits */
|
|
|
|
/* enhanced buffer descriptor control/status used by Ethernet transmit */
|
|
#define BD_ENET_TX_INT 0x40000000
|
|
#define BD_ENET_TX_TS 0x20000000
|
|
#define BD_ENET_TX_PINS 0x10000000
|
|
#define BD_ENET_TX_IINS 0x08000000
|
|
|
|
|
|
/* This device has up to three irqs on some platforms */
|
|
#define FEC_IRQ_NUM 3
|
|
|
|
/* Maximum number of queues supported
|
|
* ENET with AVB IP can support up to 3 independent tx queues and rx queues.
|
|
* User can point the queue number that is less than or equal to 3.
|
|
*/
|
|
#define FEC_ENET_MAX_TX_QS 3
|
|
#define FEC_ENET_MAX_RX_QS 3
|
|
|
|
#define FEC_R_DES_START(X) (((X) == 1) ? FEC_R_DES_START_1 : \
|
|
(((X) == 2) ? \
|
|
FEC_R_DES_START_2 : FEC_R_DES_START_0))
|
|
#define FEC_X_DES_START(X) (((X) == 1) ? FEC_X_DES_START_1 : \
|
|
(((X) == 2) ? \
|
|
FEC_X_DES_START_2 : FEC_X_DES_START_0))
|
|
#define FEC_R_BUFF_SIZE(X) (((X) == 1) ? FEC_R_BUFF_SIZE_1 : \
|
|
(((X) == 2) ? \
|
|
FEC_R_BUFF_SIZE_2 : FEC_R_BUFF_SIZE_0))
|
|
|
|
#define FEC_DMA_CFG(X) (((X) == 2) ? FEC_DMA_CFG_2 : FEC_DMA_CFG_1)
|
|
|
|
#define DMA_CLASS_EN (1 << 16)
|
|
#define FEC_RCMR(X) (((X) == 2) ? FEC_RCMR_2 : FEC_RCMR_1)
|
|
#define IDLE_SLOPE_MASK 0xffff
|
|
#define IDLE_SLOPE_1 0x200 /* BW fraction: 0.5 */
|
|
#define IDLE_SLOPE_2 0x200 /* BW fraction: 0.5 */
|
|
#define IDLE_SLOPE(X) (((X) == 1) ? \
|
|
(IDLE_SLOPE_1 & IDLE_SLOPE_MASK) : \
|
|
(IDLE_SLOPE_2 & IDLE_SLOPE_MASK))
|
|
#define RCMR_MATCHEN (0x1 << 16)
|
|
#define RCMR_CMP_CFG(v, n) (((v) & 0x7) << (n << 2))
|
|
#define RCMR_CMP_1 (RCMR_CMP_CFG(0, 0) | RCMR_CMP_CFG(1, 1) | \
|
|
RCMR_CMP_CFG(2, 2) | RCMR_CMP_CFG(3, 3))
|
|
#define RCMR_CMP_2 (RCMR_CMP_CFG(4, 0) | RCMR_CMP_CFG(5, 1) | \
|
|
RCMR_CMP_CFG(6, 2) | RCMR_CMP_CFG(7, 3))
|
|
#define RCMR_CMP(X) (((X) == 1) ? RCMR_CMP_1 : RCMR_CMP_2)
|
|
#define FEC_TX_BD_FTYPE(X) (((X) & 0xf) << 20)
|
|
|
|
/* The number of Tx and Rx buffers. These are allocated from the page
|
|
* pool. The code may assume these are power of two, so it it best
|
|
* to keep them that size.
|
|
* We don't need to allocate pages for the transmitter. We just use
|
|
* the skbuffer directly.
|
|
*/
|
|
|
|
#define FEC_ENET_RX_PAGES 256
|
|
#define FEC_ENET_RX_FRSIZE 2048
|
|
#define FEC_ENET_RX_FRPPG (PAGE_SIZE / FEC_ENET_RX_FRSIZE)
|
|
#define RX_RING_SIZE (FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES)
|
|
#define FEC_ENET_TX_FRSIZE 2048
|
|
#define FEC_ENET_TX_FRPPG (PAGE_SIZE / FEC_ENET_TX_FRSIZE)
|
|
#define TX_RING_SIZE 512 /* Must be power of two */
|
|
#define TX_RING_MOD_MASK 511 /* for this to work */
|
|
|
|
#define BD_ENET_RX_INT 0x00800000
|
|
#define BD_ENET_RX_PTP ((ushort)0x0400)
|
|
#define BD_ENET_RX_ICE 0x00000020
|
|
#define BD_ENET_RX_PCR 0x00000010
|
|
#define FLAG_RX_CSUM_ENABLED (BD_ENET_RX_ICE | BD_ENET_RX_PCR)
|
|
#define FLAG_RX_CSUM_ERROR (BD_ENET_RX_ICE | BD_ENET_RX_PCR)
|
|
|
|
/* Interrupt events/masks. */
|
|
#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */
|
|
#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */
|
|
#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */
|
|
#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */
|
|
#define FEC_ENET_TXF_0 ((uint)0x08000000) /* Full frame transmitted */
|
|
#define FEC_ENET_TXF_1 ((uint)0x00000008) /* Full frame transmitted */
|
|
#define FEC_ENET_TXF_2 ((uint)0x00000080) /* Full frame transmitted */
|
|
#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */
|
|
#define FEC_ENET_RXF_0 ((uint)0x02000000) /* Full frame received */
|
|
#define FEC_ENET_RXF_1 ((uint)0x00000002) /* Full frame received */
|
|
#define FEC_ENET_RXF_2 ((uint)0x00000020) /* Full frame received */
|
|
#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */
|
|
#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */
|
|
#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */
|
|
#define FEC_ENET_WAKEUP ((uint)0x00020000) /* Wakeup request */
|
|
#define FEC_ENET_TXF (FEC_ENET_TXF_0 | FEC_ENET_TXF_1 | FEC_ENET_TXF_2)
|
|
#define FEC_ENET_RXF (FEC_ENET_RXF_0 | FEC_ENET_RXF_1 | FEC_ENET_RXF_2)
|
|
#define FEC_ENET_TS_AVAIL ((uint)0x00010000)
|
|
#define FEC_ENET_TS_TIMER ((uint)0x00008000)
|
|
|
|
#define FEC_DEFAULT_IMASK (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII)
|
|
#define FEC_NAPI_IMASK FEC_ENET_MII
|
|
#define FEC_RX_DISABLED_IMASK (FEC_DEFAULT_IMASK & (~FEC_ENET_RXF))
|
|
|
|
/* ENET interrupt coalescing macro define */
|
|
#define FEC_ITR_CLK_SEL (0x1 << 30)
|
|
#define FEC_ITR_EN (0x1 << 31)
|
|
#define FEC_ITR_ICFT(X) (((X) & 0xff) << 20)
|
|
#define FEC_ITR_ICTT(X) ((X) & 0xffff)
|
|
#define FEC_ITR_ICFT_DEFAULT 200 /* Set 200 frame count threshold */
|
|
#define FEC_ITR_ICTT_DEFAULT 1000 /* Set 1000us timer threshold */
|
|
|
|
#define FEC_VLAN_TAG_LEN 0x04
|
|
#define FEC_ETHTYPE_LEN 0x02
|
|
|
|
/* Controller is ENET-MAC */
|
|
#define FEC_QUIRK_ENET_MAC (1 << 0)
|
|
/* Controller needs driver to swap frame */
|
|
#define FEC_QUIRK_SWAP_FRAME (1 << 1)
|
|
/* Controller uses gasket */
|
|
#define FEC_QUIRK_USE_GASKET (1 << 2)
|
|
/* Controller has GBIT support */
|
|
#define FEC_QUIRK_HAS_GBIT (1 << 3)
|
|
/* Controller has extend desc buffer */
|
|
#define FEC_QUIRK_HAS_BUFDESC_EX (1 << 4)
|
|
/* Controller has hardware checksum support */
|
|
#define FEC_QUIRK_HAS_CSUM (1 << 5)
|
|
/* Controller has hardware vlan support */
|
|
#define FEC_QUIRK_HAS_VLAN (1 << 6)
|
|
/* ENET IP errata ERR006358
|
|
*
|
|
* If the ready bit in the transmit buffer descriptor (TxBD[R]) is previously
|
|
* detected as not set during a prior frame transmission, then the
|
|
* ENET_TDAR[TDAR] bit is cleared at a later time, even if additional TxBDs
|
|
* were added to the ring and the ENET_TDAR[TDAR] bit is set. This results in
|
|
* frames not being transmitted until there is a 0-to-1 transition on
|
|
* ENET_TDAR[TDAR].
|
|
*/
|
|
#define FEC_QUIRK_ERR006358 (1 << 7)
|
|
/* ENET IP hw AVB
|
|
*
|
|
* i.MX6SX ENET IP add Audio Video Bridging (AVB) feature support.
|
|
* - Two class indicators on receive with configurable priority
|
|
* - Two class indicators and line speed timer on transmit allowing
|
|
* implementation class credit based shapers externally
|
|
* - Additional DMA registers provisioned to allow managing up to 3
|
|
* independent rings
|
|
*/
|
|
#define FEC_QUIRK_HAS_AVB (1 << 8)
|
|
/* There is a TDAR race condition for mutliQ when the software sets TDAR
|
|
* and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles).
|
|
* This will cause the udma_tx and udma_tx_arbiter state machines to hang.
|
|
* The issue exist at i.MX6SX enet IP.
|
|
*/
|
|
#define FEC_QUIRK_ERR007885 (1 << 9)
|
|
/* ENET Block Guide/ Chapter for the iMX6SX (PELE) address one issue:
|
|
* After set ENET_ATCR[Capture], there need some time cycles before the counter
|
|
* value is capture in the register clock domain.
|
|
* The wait-time-cycles is at least 6 clock cycles of the slower clock between
|
|
* the register clock and the 1588 clock. The 1588 ts_clk is fixed to 25Mhz,
|
|
* register clock is 66Mhz, so the wait-time-cycles must be greater than 240ns
|
|
* (40ns * 6).
|
|
*/
|
|
#define FEC_QUIRK_BUG_CAPTURE (1 << 10)
|
|
/* Controller has only one MDIO bus */
|
|
#define FEC_QUIRK_SINGLE_MDIO (1 << 11)
|
|
/* Controller supports RACC register */
|
|
#define FEC_QUIRK_HAS_RACC (1 << 12)
|
|
/* Controller supports interrupt coalesc */
|
|
#define FEC_QUIRK_HAS_COALESCE (1 << 13)
|
|
/* Interrupt doesn't wake CPU from deep idle */
|
|
#define FEC_QUIRK_ERR006687 (1 << 14)
|
|
/* The MIB counters should be cleared and enabled during
|
|
* initialisation.
|
|
*/
|
|
#define FEC_QUIRK_MIB_CLEAR (1 << 15)
|
|
|
|
struct bufdesc_prop {
|
|
int qid;
|
|
/* Address of Rx and Tx buffers */
|
|
struct bufdesc *base;
|
|
struct bufdesc *last;
|
|
struct bufdesc *cur;
|
|
void __iomem *reg_desc_active;
|
|
dma_addr_t dma;
|
|
unsigned short ring_size;
|
|
unsigned char dsize;
|
|
unsigned char dsize_log2;
|
|
};
|
|
|
|
struct fec_enet_priv_tx_q {
|
|
struct bufdesc_prop bd;
|
|
unsigned char *tx_bounce[TX_RING_SIZE];
|
|
struct sk_buff *tx_skbuff[TX_RING_SIZE];
|
|
|
|
unsigned short tx_stop_threshold;
|
|
unsigned short tx_wake_threshold;
|
|
|
|
struct bufdesc *dirty_tx;
|
|
char *tso_hdrs;
|
|
dma_addr_t tso_hdrs_dma;
|
|
};
|
|
|
|
struct fec_enet_priv_rx_q {
|
|
struct bufdesc_prop bd;
|
|
struct sk_buff *rx_skbuff[RX_RING_SIZE];
|
|
};
|
|
|
|
/* The FEC buffer descriptors track the ring buffers. The rx_bd_base and
|
|
* tx_bd_base always point to the base of the buffer descriptors. The
|
|
* cur_rx and cur_tx point to the currently available buffer.
|
|
* The dirty_tx tracks the current buffer that is being sent by the
|
|
* controller. The cur_tx and dirty_tx are equal under both completely
|
|
* empty and completely full conditions. The empty/ready indicator in
|
|
* the buffer descriptor determines the actual condition.
|
|
*/
|
|
struct fec_enet_private {
|
|
/* Hardware registers of the FEC device */
|
|
void __iomem *hwp;
|
|
|
|
struct net_device *netdev;
|
|
|
|
struct clk *clk_ipg;
|
|
struct clk *clk_ahb;
|
|
struct clk *clk_ref;
|
|
struct clk *clk_enet_out;
|
|
struct clk *clk_ptp;
|
|
|
|
bool ptp_clk_on;
|
|
struct mutex ptp_clk_mutex;
|
|
unsigned int num_tx_queues;
|
|
unsigned int num_rx_queues;
|
|
|
|
/* The saved address of a sent-in-place packet/buffer, for skfree(). */
|
|
struct fec_enet_priv_tx_q *tx_queue[FEC_ENET_MAX_TX_QS];
|
|
struct fec_enet_priv_rx_q *rx_queue[FEC_ENET_MAX_RX_QS];
|
|
|
|
unsigned int total_tx_ring_size;
|
|
unsigned int total_rx_ring_size;
|
|
|
|
unsigned long work_tx;
|
|
unsigned long work_rx;
|
|
unsigned long work_ts;
|
|
unsigned long work_mdio;
|
|
|
|
struct platform_device *pdev;
|
|
|
|
int dev_id;
|
|
|
|
/* Phylib and MDIO interface */
|
|
struct mii_bus *mii_bus;
|
|
int mii_timeout;
|
|
uint phy_speed;
|
|
phy_interface_t phy_interface;
|
|
struct device_node *phy_node;
|
|
int link;
|
|
int full_duplex;
|
|
int speed;
|
|
struct completion mdio_done;
|
|
int irq[FEC_IRQ_NUM];
|
|
bool bufdesc_ex;
|
|
int pause_flag;
|
|
int wol_flag;
|
|
u32 quirks;
|
|
|
|
struct napi_struct napi;
|
|
int csum_flags;
|
|
|
|
struct work_struct tx_timeout_work;
|
|
|
|
struct ptp_clock *ptp_clock;
|
|
struct ptp_clock_info ptp_caps;
|
|
unsigned long last_overflow_check;
|
|
spinlock_t tmreg_lock;
|
|
struct cyclecounter cc;
|
|
struct timecounter tc;
|
|
int rx_hwtstamp_filter;
|
|
u32 base_incval;
|
|
u32 cycle_speed;
|
|
int hwts_rx_en;
|
|
int hwts_tx_en;
|
|
struct delayed_work time_keep;
|
|
struct regulator *reg_phy;
|
|
|
|
unsigned int tx_align;
|
|
unsigned int rx_align;
|
|
|
|
/* hw interrupt coalesce */
|
|
unsigned int rx_pkts_itr;
|
|
unsigned int rx_time_itr;
|
|
unsigned int tx_pkts_itr;
|
|
unsigned int tx_time_itr;
|
|
unsigned int itr_clk_rate;
|
|
|
|
u32 rx_copybreak;
|
|
|
|
/* ptp clock period in ns*/
|
|
unsigned int ptp_inc;
|
|
|
|
/* pps */
|
|
int pps_channel;
|
|
unsigned int reload_period;
|
|
int pps_enable;
|
|
unsigned int next_counter;
|
|
|
|
u64 ethtool_stats[0];
|
|
};
|
|
|
|
void fec_ptp_init(struct platform_device *pdev, int irq_idx);
|
|
void fec_ptp_stop(struct platform_device *pdev);
|
|
void fec_ptp_start_cyclecounter(struct net_device *ndev);
|
|
int fec_ptp_set(struct net_device *ndev, struct ifreq *ifr);
|
|
int fec_ptp_get(struct net_device *ndev, struct ifreq *ifr);
|
|
|
|
/****************************************************************************/
|
|
#endif /* FEC_H */
|