Nano_Allwinner
/
ubuntu-linux-kernel
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 1 Wiki Activity
ubuntu-linux-kernel/drivers/mtd/nand/vf610_nfc.c

848 lines
22 KiB
C
Raw Permalink Blame History

/*
* Copyright 2009-2015 Freescale Semiconductor, Inc. and others
*
* Description: MPC5125, VF610, MCF54418 and Kinetis K70 Nand driver.
* Jason ported to M54418TWR and MVFA5 (VF610).
* Authors: Stefan Agner <stefan.agner@toradex.com>
* Bill Pringlemeir <bpringlemeir@nbsps.com>
* Shaohui Xie <b21989@freescale.com>
* Jason Jin <Jason.jin@freescale.com>
*
* Based on original driver mpc5121_nfc.c.
*
* This is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* Limitations:
* - Untested on MPC5125 and M54418.
* - DMA and pipelining not used.
* - 2K pages or less.
* - HW ECC: Only 2K page with 64+ OOB.
* - HW ECC: Only 24 and 32-bit error correction implemented.
*/
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#define DRV_NAME "vf610_nfc"
/* Register Offsets */
#define NFC_FLASH_CMD1 0x3F00
#define NFC_FLASH_CMD2 0x3F04
#define NFC_COL_ADDR 0x3F08
#define NFC_ROW_ADDR 0x3F0c
#define NFC_ROW_ADDR_INC 0x3F14
#define NFC_FLASH_STATUS1 0x3F18
#define NFC_FLASH_STATUS2 0x3F1c
#define NFC_CACHE_SWAP 0x3F28
#define NFC_SECTOR_SIZE 0x3F2c
#define NFC_FLASH_CONFIG 0x3F30
#define NFC_IRQ_STATUS 0x3F38
/* Addresses for NFC MAIN RAM BUFFER areas */
#define NFC_MAIN_AREA(n) ((n) * 0x1000)
#define PAGE_2K 0x0800
#define OOB_64 0x0040
#define OOB_MAX 0x0100
/*
* NFC_CMD2[CODE] values. See section:
* - 31.4.7 Flash Command Code Description, Vybrid manual
* - 23.8.6 Flash Command Sequencer, MPC5125 manual
*
* Briefly these are bitmasks of controller cycles.
*/
#define READ_PAGE_CMD_CODE 0x7EE0
#define READ_ONFI_PARAM_CMD_CODE 0x4860
#define PROGRAM_PAGE_CMD_CODE 0x7FC0
#define ERASE_CMD_CODE 0x4EC0
#define READ_ID_CMD_CODE 0x4804
#define RESET_CMD_CODE 0x4040
#define STATUS_READ_CMD_CODE 0x4068
/* NFC ECC mode define */
#define ECC_BYPASS 0
#define ECC_45_BYTE 6
#define ECC_60_BYTE 7
/*** Register Mask and bit definitions */
/* NFC_FLASH_CMD1 Field */
#define CMD_BYTE2_MASK 0xFF000000
#define CMD_BYTE2_SHIFT 24
/* NFC_FLASH_CM2 Field */
#define CMD_BYTE1_MASK 0xFF000000
#define CMD_BYTE1_SHIFT 24
#define CMD_CODE_MASK 0x00FFFF00
#define CMD_CODE_SHIFT 8
#define BUFNO_MASK 0x00000006
#define BUFNO_SHIFT 1
#define START_BIT BIT(0)
/* NFC_COL_ADDR Field */
#define COL_ADDR_MASK 0x0000FFFF
#define COL_ADDR_SHIFT 0
/* NFC_ROW_ADDR Field */
#define ROW_ADDR_MASK 0x00FFFFFF
#define ROW_ADDR_SHIFT 0
#define ROW_ADDR_CHIP_SEL_RB_MASK 0xF0000000
#define ROW_ADDR_CHIP_SEL_RB_SHIFT 28
#define ROW_ADDR_CHIP_SEL_MASK 0x0F000000
#define ROW_ADDR_CHIP_SEL_SHIFT 24
/* NFC_FLASH_STATUS2 Field */
#define STATUS_BYTE1_MASK 0x000000FF
/* NFC_FLASH_CONFIG Field */
#define CONFIG_ECC_SRAM_ADDR_MASK 0x7FC00000
#define CONFIG_ECC_SRAM_ADDR_SHIFT 22
#define CONFIG_ECC_SRAM_REQ_BIT BIT(21)
#define CONFIG_DMA_REQ_BIT BIT(20)
#define CONFIG_ECC_MODE_MASK 0x000E0000
#define CONFIG_ECC_MODE_SHIFT 17
#define CONFIG_FAST_FLASH_BIT BIT(16)
#define CONFIG_16BIT BIT(7)
#define CONFIG_BOOT_MODE_BIT BIT(6)
#define CONFIG_ADDR_AUTO_INCR_BIT BIT(5)
#define CONFIG_BUFNO_AUTO_INCR_BIT BIT(4)
#define CONFIG_PAGE_CNT_MASK 0xF
#define CONFIG_PAGE_CNT_SHIFT 0
/* NFC_IRQ_STATUS Field */
#define IDLE_IRQ_BIT BIT(29)
#define IDLE_EN_BIT BIT(20)
#define CMD_DONE_CLEAR_BIT BIT(18)
#define IDLE_CLEAR_BIT BIT(17)
/*
* ECC status - seems to consume 8 bytes (double word). The documented
* status byte is located in the lowest byte of the second word (which is
* the 4th or 7th byte depending on endianness).
* Calculate an offset to store the ECC status at the end of the buffer.
*/
#define ECC_SRAM_ADDR (PAGE_2K + OOB_MAX - 8)
#define ECC_STATUS 0x4
#define ECC_STATUS_MASK 0x80
#define ECC_STATUS_ERR_COUNT 0x3F
enum vf610_nfc_alt_buf {
ALT_BUF_DATA = 0,
ALT_BUF_ID = 1,
ALT_BUF_STAT = 2,
ALT_BUF_ONFI = 3,
};
enum vf610_nfc_variant {
NFC_VFC610 = 1,
};
struct vf610_nfc {
struct nand_chip chip;
struct device *dev;
void __iomem *regs;
struct completion cmd_done;
uint buf_offset;
int write_sz;
/* Status and ID are in alternate locations. */
enum vf610_nfc_alt_buf alt_buf;
enum vf610_nfc_variant variant;
struct clk *clk;
bool use_hw_ecc;
u32 ecc_mode;
};
static inline struct vf610_nfc *mtd_to_nfc(struct mtd_info *mtd)
{
return container_of(mtd_to_nand(mtd), struct vf610_nfc, chip);
}
static inline u32 vf610_nfc_read(struct vf610_nfc *nfc, uint reg)
{
return readl(nfc->regs + reg);
}
static inline void vf610_nfc_write(struct vf610_nfc *nfc, uint reg, u32 val)
{
writel(val, nfc->regs + reg);
}
static inline void vf610_nfc_set(struct vf610_nfc *nfc, uint reg, u32 bits)
{
vf610_nfc_write(nfc, reg, vf610_nfc_read(nfc, reg) | bits);
}
static inline void vf610_nfc_clear(struct vf610_nfc *nfc, uint reg, u32 bits)
{
vf610_nfc_write(nfc, reg, vf610_nfc_read(nfc, reg) & ~bits);
}
static inline void vf610_nfc_set_field(struct vf610_nfc *nfc, u32 reg,
u32 mask, u32 shift, u32 val)
{
vf610_nfc_write(nfc, reg,
(vf610_nfc_read(nfc, reg) & (~mask)) | val << shift);
}
static inline void vf610_nfc_memcpy(void *dst, const void __iomem *src,
size_t n)
{
/*
* Use this accessor for the internal SRAM buffers. On the ARM
* Freescale Vybrid SoC it's known that the driver can treat
* the SRAM buffer as if it's memory. Other platform might need
* to treat the buffers differently.
*
* For the time being, use memcpy
*/
memcpy(dst, src, n);
}
/* Clear flags for upcoming command */
static inline void vf610_nfc_clear_status(struct vf610_nfc *nfc)
{
u32 tmp = vf610_nfc_read(nfc, NFC_IRQ_STATUS);
tmp |= CMD_DONE_CLEAR_BIT | IDLE_CLEAR_BIT;
vf610_nfc_write(nfc, NFC_IRQ_STATUS, tmp);
}
static void vf610_nfc_done(struct vf610_nfc *nfc)
{
unsigned long timeout = msecs_to_jiffies(100);
/*
* Barrier is needed after this write. This write need
* to be done before reading the next register the first
* time.
* vf610_nfc_set implicates such a barrier by using writel
* to write to the register.
*/
vf610_nfc_set(nfc, NFC_IRQ_STATUS, IDLE_EN_BIT);
vf610_nfc_set(nfc, NFC_FLASH_CMD2, START_BIT);
if (!wait_for_completion_timeout(&nfc->cmd_done, timeout))
dev_warn(nfc->dev, "Timeout while waiting for BUSY.\n");
vf610_nfc_clear_status(nfc);
}
static u8 vf610_nfc_get_id(struct vf610_nfc *nfc, int col)
{
u32 flash_id;
if (col < 4) {
flash_id = vf610_nfc_read(nfc, NFC_FLASH_STATUS1);
flash_id >>= (3 - col) * 8;
} else {
flash_id = vf610_nfc_read(nfc, NFC_FLASH_STATUS2);
flash_id >>= 24;
}
return flash_id & 0xff;
}
static u8 vf610_nfc_get_status(struct vf610_nfc *nfc)
{
return vf610_nfc_read(nfc, NFC_FLASH_STATUS2) & STATUS_BYTE1_MASK;
}
static void vf610_nfc_send_command(struct vf610_nfc *nfc, u32 cmd_byte1,
u32 cmd_code)
{
u32 tmp;
vf610_nfc_clear_status(nfc);
tmp = vf610_nfc_read(nfc, NFC_FLASH_CMD2);
tmp &= ~(CMD_BYTE1_MASK | CMD_CODE_MASK | BUFNO_MASK);
tmp |= cmd_byte1 << CMD_BYTE1_SHIFT;
tmp |= cmd_code << CMD_CODE_SHIFT;
vf610_nfc_write(nfc, NFC_FLASH_CMD2, tmp);
}
static void vf610_nfc_send_commands(struct vf610_nfc *nfc, u32 cmd_byte1,
u32 cmd_byte2, u32 cmd_code)
{
u32 tmp;
vf610_nfc_send_command(nfc, cmd_byte1, cmd_code);
tmp = vf610_nfc_read(nfc, NFC_FLASH_CMD1);
tmp &= ~CMD_BYTE2_MASK;
tmp |= cmd_byte2 << CMD_BYTE2_SHIFT;
vf610_nfc_write(nfc, NFC_FLASH_CMD1, tmp);
}
static irqreturn_t vf610_nfc_irq(int irq, void *data)
{
struct mtd_info *mtd = data;
struct vf610_nfc *nfc = mtd_to_nfc(mtd);
vf610_nfc_clear(nfc, NFC_IRQ_STATUS, IDLE_EN_BIT);
complete(&nfc->cmd_done);
return IRQ_HANDLED;
}
static void vf610_nfc_addr_cycle(struct vf610_nfc *nfc, int column, int page)
{
if (column != -1) {
if (nfc->chip.options & NAND_BUSWIDTH_16)
column = column / 2;
vf610_nfc_set_field(nfc, NFC_COL_ADDR, COL_ADDR_MASK,
COL_ADDR_SHIFT, column);
}
if (page != -1)
vf610_nfc_set_field(nfc, NFC_ROW_ADDR, ROW_ADDR_MASK,
ROW_ADDR_SHIFT, page);
}
static inline void vf610_nfc_ecc_mode(struct vf610_nfc *nfc, int ecc_mode)
{
vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG,
CONFIG_ECC_MODE_MASK,
CONFIG_ECC_MODE_SHIFT, ecc_mode);
}
static inline void vf610_nfc_transfer_size(struct vf610_nfc *nfc, int size)
{
vf610_nfc_write(nfc, NFC_SECTOR_SIZE, size);
}
static void vf610_nfc_command(struct mtd_info *mtd, unsigned command,
int column, int page)
{
struct vf610_nfc *nfc = mtd_to_nfc(mtd);
int trfr_sz = nfc->chip.options & NAND_BUSWIDTH_16 ? 1 : 0;
nfc->buf_offset = max(column, 0);
nfc->alt_buf = ALT_BUF_DATA;
switch (command) {
case NAND_CMD_SEQIN:
/* Use valid column/page from preread... */
vf610_nfc_addr_cycle(nfc, column, page);
nfc->buf_offset = 0;
/*
* SEQIN => data => PAGEPROG sequence is done by the controller
* hence we do not need to issue the command here...
*/
return;
case NAND_CMD_PAGEPROG:
trfr_sz += nfc->write_sz;
vf610_nfc_transfer_size(nfc, trfr_sz);
vf610_nfc_send_commands(nfc, NAND_CMD_SEQIN,
command, PROGRAM_PAGE_CMD_CODE);
if (nfc->use_hw_ecc)
vf610_nfc_ecc_mode(nfc, nfc->ecc_mode);
else
vf610_nfc_ecc_mode(nfc, ECC_BYPASS);
break;
case NAND_CMD_RESET:
vf610_nfc_transfer_size(nfc, 0);
vf610_nfc_send_command(nfc, command, RESET_CMD_CODE);
break;
case NAND_CMD_READOOB:
trfr_sz += mtd->oobsize;
column = mtd->writesize;
vf610_nfc_transfer_size(nfc, trfr_sz);
vf610_nfc_send_commands(nfc, NAND_CMD_READ0,
NAND_CMD_READSTART, READ_PAGE_CMD_CODE);
vf610_nfc_addr_cycle(nfc, column, page);
vf610_nfc_ecc_mode(nfc, ECC_BYPASS);
break;
case NAND_CMD_READ0:
trfr_sz += mtd->writesize + mtd->oobsize;
vf610_nfc_transfer_size(nfc, trfr_sz);
vf610_nfc_send_commands(nfc, NAND_CMD_READ0,
NAND_CMD_READSTART, READ_PAGE_CMD_CODE);
vf610_nfc_addr_cycle(nfc, column, page);
vf610_nfc_ecc_mode(nfc, nfc->ecc_mode);
break;
case NAND_CMD_PARAM:
nfc->alt_buf = ALT_BUF_ONFI;
trfr_sz = 3 * sizeof(struct nand_onfi_params);
vf610_nfc_transfer_size(nfc, trfr_sz);
vf610_nfc_send_command(nfc, command, READ_ONFI_PARAM_CMD_CODE);
vf610_nfc_addr_cycle(nfc, -1, column);
vf610_nfc_ecc_mode(nfc, ECC_BYPASS);
break;
case NAND_CMD_ERASE1:
vf610_nfc_transfer_size(nfc, 0);
vf610_nfc_send_commands(nfc, command,
NAND_CMD_ERASE2, ERASE_CMD_CODE);
vf610_nfc_addr_cycle(nfc, column, page);
break;
case NAND_CMD_READID:
nfc->alt_buf = ALT_BUF_ID;
nfc->buf_offset = 0;
vf610_nfc_transfer_size(nfc, 0);
vf610_nfc_send_command(nfc, command, READ_ID_CMD_CODE);
vf610_nfc_addr_cycle(nfc, -1, column);
break;
case NAND_CMD_STATUS:
nfc->alt_buf = ALT_BUF_STAT;
vf610_nfc_transfer_size(nfc, 0);
vf610_nfc_send_command(nfc, command, STATUS_READ_CMD_CODE);
break;
default:
return;
}
vf610_nfc_done(nfc);
nfc->use_hw_ecc = false;
nfc->write_sz = 0;
}
static void vf610_nfc_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
struct vf610_nfc *nfc = mtd_to_nfc(mtd);
uint c = nfc->buf_offset;
/* Alternate buffers are only supported through read_byte */
WARN_ON(nfc->alt_buf);
vf610_nfc_memcpy(buf, nfc->regs + NFC_MAIN_AREA(0) + c, len);
nfc->buf_offset += len;
}
static void vf610_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf,
int len)
{
struct vf610_nfc *nfc = mtd_to_nfc(mtd);
uint c = nfc->buf_offset;
uint l;
l = min_t(uint, len, mtd->writesize + mtd->oobsize - c);
vf610_nfc_memcpy(nfc->regs + NFC_MAIN_AREA(0) + c, buf, l);
nfc->write_sz += l;
nfc->buf_offset += l;
}
static uint8_t vf610_nfc_read_byte(struct mtd_info *mtd)
{
struct vf610_nfc *nfc = mtd_to_nfc(mtd);
u8 tmp;
uint c = nfc->buf_offset;
switch (nfc->alt_buf) {
case ALT_BUF_ID:
tmp = vf610_nfc_get_id(nfc, c);
break;
case ALT_BUF_STAT:
tmp = vf610_nfc_get_status(nfc);
break;
#ifdef __LITTLE_ENDIAN
case ALT_BUF_ONFI:
/* Reverse byte since the controller uses big endianness */
c = nfc->buf_offset ^ 0x3;
/* fall-through */
#endif
default:
tmp = *((u8 *)(nfc->regs + NFC_MAIN_AREA(0) + c));
break;
}
nfc->buf_offset++;
return tmp;
}
static u16 vf610_nfc_read_word(struct mtd_info *mtd)
{
u16 tmp;
vf610_nfc_read_buf(mtd, (u_char *)&tmp, sizeof(tmp));
return tmp;
}
/* If not provided, upper layers apply a fixed delay. */
static int vf610_nfc_dev_ready(struct mtd_info *mtd)
{
/* NFC handles R/B internally; always ready. */
return 1;
}
/*
* This function supports Vybrid only (MPC5125 would have full RB and four CS)
*/
static void vf610_nfc_select_chip(struct mtd_info *mtd, int chip)
{
struct vf610_nfc *nfc = mtd_to_nfc(mtd);
u32 tmp = vf610_nfc_read(nfc, NFC_ROW_ADDR);
/* Vybrid only (MPC5125 would have full RB and four CS) */
if (nfc->variant != NFC_VFC610)
return;
tmp &= ~(ROW_ADDR_CHIP_SEL_RB_MASK | ROW_ADDR_CHIP_SEL_MASK);
if (chip >= 0) {
tmp |= 1 << ROW_ADDR_CHIP_SEL_RB_SHIFT;
tmp |= BIT(chip) << ROW_ADDR_CHIP_SEL_SHIFT;
}
vf610_nfc_write(nfc, NFC_ROW_ADDR, tmp);
}
/* Count the number of 0's in buff up to max_bits */
static inline int count_written_bits(uint8_t *buff, int size, int max_bits)
{
uint32_t *buff32 = (uint32_t *)buff;
int k, written_bits = 0;
for (k = 0; k < (size / 4); k++) {
written_bits += hweight32(~buff32[k]);
if (unlikely(written_bits > max_bits))
break;
}
return written_bits;
}
static inline int vf610_nfc_correct_data(struct mtd_info *mtd, uint8_t *dat,
uint8_t *oob, int page)
{
struct vf610_nfc *nfc = mtd_to_nfc(mtd);
u32 ecc_status_off = NFC_MAIN_AREA(0) + ECC_SRAM_ADDR + ECC_STATUS;
u8 ecc_status;
u8 ecc_count;
int flips_threshold = nfc->chip.ecc.strength / 2;
ecc_status = vf610_nfc_read(nfc, ecc_status_off) & 0xff;
ecc_count = ecc_status & ECC_STATUS_ERR_COUNT;
if (!(ecc_status & ECC_STATUS_MASK))
return ecc_count;
/* Read OOB without ECC unit enabled */
vf610_nfc_command(mtd, NAND_CMD_READOOB, 0, page);
vf610_nfc_read_buf(mtd, oob, mtd->oobsize);
/*
* On an erased page, bit count (including OOB) should be zero or
* at least less then half of the ECC strength.
*/
return nand_check_erased_ecc_chunk(dat, nfc->chip.ecc.size, oob,
mtd->oobsize, NULL, 0,
flips_threshold);
}
static int vf610_nfc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page)
{
int eccsize = chip->ecc.size;
int stat;
vf610_nfc_read_buf(mtd, buf, eccsize);
if (oob_required)
vf610_nfc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
stat = vf610_nfc_correct_data(mtd, buf, chip->oob_poi, page);
if (stat < 0) {
mtd->ecc_stats.failed++;
return 0;
} else {
mtd->ecc_stats.corrected += stat;
return stat;
}
}
static int vf610_nfc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int oob_required, int page)
{
struct vf610_nfc *nfc = mtd_to_nfc(mtd);
vf610_nfc_write_buf(mtd, buf, mtd->writesize);
if (oob_required)
vf610_nfc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
/* Always write whole page including OOB due to HW ECC */
nfc->use_hw_ecc = true;
nfc->write_sz = mtd->writesize + mtd->oobsize;
return 0;
}
static const struct of_device_id vf610_nfc_dt_ids[] = {
{ .compatible = "fsl,vf610-nfc", .data = (void *)NFC_VFC610 },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, vf610_nfc_dt_ids);
static void vf610_nfc_preinit_controller(struct vf610_nfc *nfc)
{
vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_ADDR_AUTO_INCR_BIT);
vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_BUFNO_AUTO_INCR_BIT);
vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_BOOT_MODE_BIT);
vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_DMA_REQ_BIT);
vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_FAST_FLASH_BIT);
/* Disable virtual pages, only one elementary transfer unit */
vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG, CONFIG_PAGE_CNT_MASK,
CONFIG_PAGE_CNT_SHIFT, 1);
}
static void vf610_nfc_init_controller(struct vf610_nfc *nfc)
{
if (nfc->chip.options & NAND_BUSWIDTH_16)
vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
else
vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
if (nfc->chip.ecc.mode == NAND_ECC_HW) {
/* Set ECC status offset in SRAM */
vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG,
CONFIG_ECC_SRAM_ADDR_MASK,
CONFIG_ECC_SRAM_ADDR_SHIFT,
ECC_SRAM_ADDR >> 3);
/* Enable ECC status in SRAM */
vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_ECC_SRAM_REQ_BIT);
}
}
static int vf610_nfc_probe(struct platform_device *pdev)
{
struct vf610_nfc *nfc;
struct resource *res;
struct mtd_info *mtd;
struct nand_chip *chip;
struct device_node *child;
const struct of_device_id *of_id;
int err;
int irq;
nfc = devm_kzalloc(&pdev->dev, sizeof(*nfc), GFP_KERNEL);
if (!nfc)
return -ENOMEM;
nfc->dev = &pdev->dev;
chip = &nfc->chip;
mtd = nand_to_mtd(chip);
mtd->owner = THIS_MODULE;
mtd->dev.parent = nfc->dev;
mtd->name = DRV_NAME;
irq = platform_get_irq(pdev, 0);
if (irq <= 0)
return -EINVAL;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
nfc->regs = devm_ioremap_resource(nfc->dev, res);
if (IS_ERR(nfc->regs))
return PTR_ERR(nfc->regs);
nfc->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(nfc->clk))
return PTR_ERR(nfc->clk);
err = clk_prepare_enable(nfc->clk);
if (err) {
dev_err(nfc->dev, "Unable to enable clock!\n");
return err;
}
of_id = of_match_device(vf610_nfc_dt_ids, &pdev->dev);
nfc->variant = (enum vf610_nfc_variant)of_id->data;
for_each_available_child_of_node(nfc->dev->of_node, child) {
if (of_device_is_compatible(child, "fsl,vf610-nfc-nandcs")) {
if (nand_get_flash_node(chip)) {
dev_err(nfc->dev,
"Only one NAND chip supported!\n");
err = -EINVAL;
goto error;
}
nand_set_flash_node(chip, child);
}
}
if (!nand_get_flash_node(chip)) {
dev_err(nfc->dev, "NAND chip sub-node missing!\n");
err = -ENODEV;
goto err_clk;
}
chip->dev_ready = vf610_nfc_dev_ready;
chip->cmdfunc = vf610_nfc_command;
chip->read_byte = vf610_nfc_read_byte;
chip->read_word = vf610_nfc_read_word;
chip->read_buf = vf610_nfc_read_buf;
chip->write_buf = vf610_nfc_write_buf;
chip->select_chip = vf610_nfc_select_chip;
chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
chip->options |= NAND_NO_SUBPAGE_WRITE;
init_completion(&nfc->cmd_done);
err = devm_request_irq(nfc->dev, irq, vf610_nfc_irq, 0, DRV_NAME, mtd);
if (err) {
dev_err(nfc->dev, "Error requesting IRQ!\n");
goto error;
}
vf610_nfc_preinit_controller(nfc);
/* first scan to find the device and get the page size */
err = nand_scan_ident(mtd, 1, NULL);
if (err)
goto error;
vf610_nfc_init_controller(nfc);
/* Bad block options. */
if (chip->bbt_options & NAND_BBT_USE_FLASH)
chip->bbt_options |= NAND_BBT_NO_OOB;
/* Single buffer only, max 256 OOB minus ECC status */
if (mtd->writesize + mtd->oobsize > PAGE_2K + OOB_MAX - 8) {
dev_err(nfc->dev, "Unsupported flash page size\n");
err = -ENXIO;
goto error;
}
if (chip->ecc.mode == NAND_ECC_HW) {
if (mtd->writesize != PAGE_2K && mtd->oobsize < 64) {
dev_err(nfc->dev, "Unsupported flash with hwecc\n");
err = -ENXIO;
goto error;
}
if (chip->ecc.size != mtd->writesize) {
dev_err(nfc->dev, "Step size needs to be page size\n");
err = -ENXIO;
goto error;
}
/* Only 64 byte ECC layouts known */
if (mtd->oobsize > 64)
mtd->oobsize = 64;
/*
* mtd->ecclayout is not specified here because we're using the
* default large page ECC layout defined in NAND core.
*/
if (chip->ecc.strength == 32) {
nfc->ecc_mode = ECC_60_BYTE;
chip->ecc.bytes = 60;
} else if (chip->ecc.strength == 24) {
nfc->ecc_mode = ECC_45_BYTE;
chip->ecc.bytes = 45;
} else {
dev_err(nfc->dev, "Unsupported ECC strength\n");
err = -ENXIO;
goto error;
}
chip->ecc.read_page = vf610_nfc_read_page;
chip->ecc.write_page = vf610_nfc_write_page;
chip->ecc.size = PAGE_2K;
}
/* second phase scan */
err = nand_scan_tail(mtd);
if (err)
goto error;
platform_set_drvdata(pdev, mtd);
/* Register device in MTD */
return mtd_device_register(mtd, NULL, 0);
error:
of_node_put(nand_get_flash_node(chip));
err_clk:
clk_disable_unprepare(nfc->clk);
return err;
}
static int vf610_nfc_remove(struct platform_device *pdev)
{
struct mtd_info *mtd = platform_get_drvdata(pdev);
struct vf610_nfc *nfc = mtd_to_nfc(mtd);
nand_release(mtd);
clk_disable_unprepare(nfc->clk);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int vf610_nfc_suspend(struct device *dev)
{
struct mtd_info *mtd = dev_get_drvdata(dev);
struct vf610_nfc *nfc = mtd_to_nfc(mtd);
clk_disable_unprepare(nfc->clk);
return 0;
}
static int vf610_nfc_resume(struct device *dev)
{
int err;
struct mtd_info *mtd = dev_get_drvdata(dev);
struct vf610_nfc *nfc = mtd_to_nfc(mtd);
err = clk_prepare_enable(nfc->clk);
if (err)
return err;
vf610_nfc_preinit_controller(nfc);
vf610_nfc_init_controller(nfc);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(vf610_nfc_pm_ops, vf610_nfc_suspend, vf610_nfc_resume);
static struct platform_driver vf610_nfc_driver = {
.driver = {
.name = DRV_NAME,
.of_match_table = vf610_nfc_dt_ids,
.pm = &vf610_nfc_pm_ops,
},
.probe = vf610_nfc_probe,
.remove = vf610_nfc_remove,
};
module_platform_driver(vf610_nfc_driver);
MODULE_AUTHOR("Stefan Agner <stefan.agner@toradex.com>");
MODULE_DESCRIPTION("Freescale VF610/MPC5125 NFC MTD NAND driver");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink