334 lines
8.3 KiB
C
334 lines
8.3 KiB
C
/*
|
|
* mxl111sf-phy.c - driver for the MaxLinear MXL111SF
|
|
*
|
|
* Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include "mxl111sf-phy.h"
|
|
#include "mxl111sf-reg.h"
|
|
|
|
int mxl111sf_init_tuner_demod(struct mxl111sf_state *state)
|
|
{
|
|
struct mxl111sf_reg_ctrl_info mxl_111_overwrite_default[] = {
|
|
{0x07, 0xff, 0x0c},
|
|
{0x58, 0xff, 0x9d},
|
|
{0x09, 0xff, 0x00},
|
|
{0x06, 0xff, 0x06},
|
|
{0xc8, 0xff, 0x40}, /* ED_LE_WIN_OLD = 0 */
|
|
{0x8d, 0x01, 0x01}, /* NEGATE_Q */
|
|
{0x32, 0xff, 0xac}, /* DIG_RFREFSELECT = 12 */
|
|
{0x42, 0xff, 0x43}, /* DIG_REG_AMP = 4 */
|
|
{0x74, 0xff, 0xc4}, /* SSPUR_FS_PRIO = 4 */
|
|
{0x71, 0xff, 0xe6}, /* SPUR_ROT_PRIO_VAL = 1 */
|
|
{0x83, 0xff, 0x64}, /* INF_FILT1_THD_SC = 100 */
|
|
{0x85, 0xff, 0x64}, /* INF_FILT2_THD_SC = 100 */
|
|
{0x88, 0xff, 0xf0}, /* INF_THD = 240 */
|
|
{0x6f, 0xf0, 0xb0}, /* DFE_DLY = 11 */
|
|
{0x00, 0xff, 0x01}, /* Change to page 1 */
|
|
{0x81, 0xff, 0x11}, /* DSM_FERR_BYPASS = 1 */
|
|
{0xf4, 0xff, 0x07}, /* DIG_FREQ_CORR = 1 */
|
|
{0xd4, 0x1f, 0x0f}, /* SPUR_TEST_NOISE_TH = 15 */
|
|
{0xd6, 0xff, 0x0c}, /* SPUR_TEST_NOISE_PAPR = 12 */
|
|
{0x00, 0xff, 0x00}, /* Change to page 0 */
|
|
{0, 0, 0}
|
|
};
|
|
|
|
mxl_debug("()");
|
|
|
|
return mxl111sf_ctrl_program_regs(state, mxl_111_overwrite_default);
|
|
}
|
|
|
|
int mxl1x1sf_soft_reset(struct mxl111sf_state *state)
|
|
{
|
|
int ret;
|
|
mxl_debug("()");
|
|
|
|
ret = mxl111sf_write_reg(state, 0xff, 0x00); /* AIC */
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
ret = mxl111sf_write_reg(state, 0x02, 0x01); /* get out of reset */
|
|
mxl_fail(ret);
|
|
fail:
|
|
return ret;
|
|
}
|
|
|
|
int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode)
|
|
{
|
|
int ret;
|
|
|
|
mxl_debug("(%s)", MXL_SOC_MODE == mode ?
|
|
"MXL_SOC_MODE" : "MXL_TUNER_MODE");
|
|
|
|
/* set device mode */
|
|
ret = mxl111sf_write_reg(state, 0x03,
|
|
MXL_SOC_MODE == mode ? 0x01 : 0x00);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
|
|
ret = mxl111sf_write_reg_mask(state,
|
|
0x7d, 0x40, MXL_SOC_MODE == mode ?
|
|
0x00 : /* enable impulse noise filter,
|
|
INF_BYP = 0 */
|
|
0x40); /* disable impulse noise filter,
|
|
INF_BYP = 1 */
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
|
|
state->device_mode = mode;
|
|
fail:
|
|
return ret;
|
|
}
|
|
|
|
/* power up tuner */
|
|
int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff)
|
|
{
|
|
mxl_debug("(%d)", onoff);
|
|
|
|
return mxl111sf_write_reg(state, 0x01, onoff ? 0x01 : 0x00);
|
|
}
|
|
|
|
int mxl111sf_disable_656_port(struct mxl111sf_state *state)
|
|
{
|
|
mxl_debug("()");
|
|
|
|
return mxl111sf_write_reg_mask(state, 0x12, 0x04, 0x00);
|
|
}
|
|
|
|
int mxl111sf_enable_usb_output(struct mxl111sf_state *state)
|
|
{
|
|
mxl_debug("()");
|
|
|
|
return mxl111sf_write_reg_mask(state, 0x17, 0x40, 0x00);
|
|
}
|
|
|
|
/* initialize TSIF as input port of MxL1X1SF for MPEG2 data transfer */
|
|
int mxl111sf_config_mpeg_in(struct mxl111sf_state *state,
|
|
unsigned int parallel_serial,
|
|
unsigned int msb_lsb_1st,
|
|
unsigned int clock_phase,
|
|
unsigned int mpeg_valid_pol,
|
|
unsigned int mpeg_sync_pol)
|
|
{
|
|
int ret;
|
|
u8 mode, tmp;
|
|
|
|
mxl_debug("(%u,%u,%u,%u,%u)", parallel_serial, msb_lsb_1st,
|
|
clock_phase, mpeg_valid_pol, mpeg_sync_pol);
|
|
|
|
/* Enable PIN MUX */
|
|
ret = mxl111sf_write_reg(state, V6_PIN_MUX_MODE_REG, V6_ENABLE_PIN_MUX);
|
|
mxl_fail(ret);
|
|
|
|
/* Configure MPEG Clock phase */
|
|
mxl111sf_read_reg(state, V6_MPEG_IN_CLK_INV_REG, &mode);
|
|
|
|
if (clock_phase == TSIF_NORMAL)
|
|
mode &= ~V6_INVERTED_CLK_PHASE;
|
|
else
|
|
mode |= V6_INVERTED_CLK_PHASE;
|
|
|
|
ret = mxl111sf_write_reg(state, V6_MPEG_IN_CLK_INV_REG, mode);
|
|
mxl_fail(ret);
|
|
|
|
/* Configure data input mode, MPEG Valid polarity, MPEG Sync polarity
|
|
* Get current configuration */
|
|
ret = mxl111sf_read_reg(state, V6_MPEG_IN_CTRL_REG, &mode);
|
|
mxl_fail(ret);
|
|
|
|
/* Data Input mode */
|
|
if (parallel_serial == TSIF_INPUT_PARALLEL) {
|
|
/* Disable serial mode */
|
|
mode &= ~V6_MPEG_IN_DATA_SERIAL;
|
|
|
|
/* Enable Parallel mode */
|
|
mode |= V6_MPEG_IN_DATA_PARALLEL;
|
|
} else {
|
|
/* Disable Parallel mode */
|
|
mode &= ~V6_MPEG_IN_DATA_PARALLEL;
|
|
|
|
/* Enable Serial Mode */
|
|
mode |= V6_MPEG_IN_DATA_SERIAL;
|
|
|
|
/* If serial interface is chosen, configure
|
|
MSB or LSB order in transmission */
|
|
ret = mxl111sf_read_reg(state,
|
|
V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
|
|
&tmp);
|
|
mxl_fail(ret);
|
|
|
|
if (msb_lsb_1st == MPEG_SER_MSB_FIRST_ENABLED)
|
|
tmp |= V6_MPEG_SER_MSB_FIRST;
|
|
else
|
|
tmp &= ~V6_MPEG_SER_MSB_FIRST;
|
|
|
|
ret = mxl111sf_write_reg(state,
|
|
V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
|
|
tmp);
|
|
mxl_fail(ret);
|
|
}
|
|
|
|
/* MPEG Sync polarity */
|
|
if (mpeg_sync_pol == TSIF_NORMAL)
|
|
mode &= ~V6_INVERTED_MPEG_SYNC;
|
|
else
|
|
mode |= V6_INVERTED_MPEG_SYNC;
|
|
|
|
/* MPEG Valid polarity */
|
|
if (mpeg_valid_pol == 0)
|
|
mode &= ~V6_INVERTED_MPEG_VALID;
|
|
else
|
|
mode |= V6_INVERTED_MPEG_VALID;
|
|
|
|
ret = mxl111sf_write_reg(state, V6_MPEG_IN_CTRL_REG, mode);
|
|
mxl_fail(ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size)
|
|
{
|
|
static struct mxl111sf_reg_ctrl_info init_i2s[] = {
|
|
{0x1b, 0xff, 0x1e}, /* pin mux mode, Choose 656/I2S input */
|
|
{0x15, 0x60, 0x60}, /* Enable I2S */
|
|
{0x17, 0xe0, 0x20}, /* Input, MPEG MODE USB,
|
|
Inverted 656 Clock, I2S_SOFT_RESET,
|
|
0 : Normal operation, 1 : Reset State */
|
|
#if 0
|
|
{0x12, 0x01, 0x00}, /* AUDIO_IRQ_CLR (Overflow Indicator) */
|
|
#endif
|
|
{0x00, 0xff, 0x02}, /* Change to Control Page */
|
|
{0x26, 0x0d, 0x0d}, /* I2S_MODE & BT656_SRC_SEL for FPGA only */
|
|
{0x00, 0xff, 0x00},
|
|
{0, 0, 0}
|
|
};
|
|
int ret;
|
|
|
|
mxl_debug("(0x%02x)", sample_size);
|
|
|
|
ret = mxl111sf_ctrl_program_regs(state, init_i2s);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
|
|
ret = mxl111sf_write_reg(state, V6_I2S_NUM_SAMPLES_REG, sample_size);
|
|
mxl_fail(ret);
|
|
fail:
|
|
return ret;
|
|
}
|
|
|
|
int mxl111sf_disable_i2s_port(struct mxl111sf_state *state)
|
|
{
|
|
static struct mxl111sf_reg_ctrl_info disable_i2s[] = {
|
|
{0x15, 0x40, 0x00},
|
|
{0, 0, 0}
|
|
};
|
|
|
|
mxl_debug("()");
|
|
|
|
return mxl111sf_ctrl_program_regs(state, disable_i2s);
|
|
}
|
|
|
|
int mxl111sf_config_i2s(struct mxl111sf_state *state,
|
|
u8 msb_start_pos, u8 data_width)
|
|
{
|
|
int ret;
|
|
u8 tmp;
|
|
|
|
mxl_debug("(0x%02x, 0x%02x)", msb_start_pos, data_width);
|
|
|
|
ret = mxl111sf_read_reg(state, V6_I2S_STREAM_START_BIT_REG, &tmp);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
|
|
tmp &= 0xe0;
|
|
tmp |= msb_start_pos;
|
|
ret = mxl111sf_write_reg(state, V6_I2S_STREAM_START_BIT_REG, tmp);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
|
|
ret = mxl111sf_read_reg(state, V6_I2S_STREAM_END_BIT_REG, &tmp);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
|
|
tmp &= 0xe0;
|
|
tmp |= data_width;
|
|
ret = mxl111sf_write_reg(state, V6_I2S_STREAM_END_BIT_REG, tmp);
|
|
mxl_fail(ret);
|
|
fail:
|
|
return ret;
|
|
}
|
|
|
|
int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff)
|
|
{
|
|
u8 val;
|
|
int ret;
|
|
|
|
mxl_debug("(%d)", onoff);
|
|
|
|
ret = mxl111sf_write_reg(state, 0x00, 0x02);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
|
|
ret = mxl111sf_read_reg(state, V8_SPI_MODE_REG, &val);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
|
|
if (onoff)
|
|
val |= 0x04;
|
|
else
|
|
val &= ~0x04;
|
|
|
|
ret = mxl111sf_write_reg(state, V8_SPI_MODE_REG, val);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
|
|
ret = mxl111sf_write_reg(state, 0x00, 0x00);
|
|
mxl_fail(ret);
|
|
fail:
|
|
return ret;
|
|
}
|
|
|
|
int mxl111sf_idac_config(struct mxl111sf_state *state,
|
|
u8 control_mode, u8 current_setting,
|
|
u8 current_value, u8 hysteresis_value)
|
|
{
|
|
int ret;
|
|
u8 val;
|
|
/* current value will be set for both automatic & manual IDAC control */
|
|
val = current_value;
|
|
|
|
if (control_mode == IDAC_MANUAL_CONTROL) {
|
|
/* enable manual control of IDAC */
|
|
val |= IDAC_MANUAL_CONTROL_BIT_MASK;
|
|
|
|
if (current_setting == IDAC_CURRENT_SINKING_ENABLE)
|
|
/* enable current sinking in manual mode */
|
|
val |= IDAC_CURRENT_SINKING_BIT_MASK;
|
|
else
|
|
/* disable current sinking in manual mode */
|
|
val &= ~IDAC_CURRENT_SINKING_BIT_MASK;
|
|
} else {
|
|
/* disable manual control of IDAC */
|
|
val &= ~IDAC_MANUAL_CONTROL_BIT_MASK;
|
|
|
|
/* set hysteresis value reg: 0x0B<5:0> */
|
|
ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG,
|
|
(hysteresis_value & 0x3F));
|
|
mxl_fail(ret);
|
|
}
|
|
|
|
ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val);
|
|
mxl_fail(ret);
|
|
|
|
return ret;
|
|
}
|