890 lines
26 KiB
C
890 lines
26 KiB
C
/*
|
|
* Copyright (C) 2006-2009 Texas Instruments Inc
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* CCDC hardware module for DM6446
|
|
* ------------------------------
|
|
*
|
|
* This module is for configuring CCD controller of DM6446 VPFE to capture
|
|
* Raw yuv or Bayer RGB data from a decoder. CCDC has several modules
|
|
* such as Defect Pixel Correction, Color Space Conversion etc to
|
|
* pre-process the Raw Bayer RGB data, before writing it to SDRAM.
|
|
* This file is named DM644x so that other variants such DM6443
|
|
* may be supported using the same module.
|
|
*
|
|
* TODO: Test Raw bayer parameter settings and bayer capture
|
|
* Split module parameter structure to module specific ioctl structs
|
|
* investigate if enum used for user space type definition
|
|
* to be replaced by #defines or integer
|
|
*/
|
|
#include <linux/platform_device.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/videodev2.h>
|
|
#include <linux/gfp.h>
|
|
#include <linux/err.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <media/davinci/dm644x_ccdc.h>
|
|
#include <media/davinci/vpss.h>
|
|
|
|
#include "dm644x_ccdc_regs.h"
|
|
#include "ccdc_hw_device.h"
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("CCDC Driver for DM6446");
|
|
MODULE_AUTHOR("Texas Instruments");
|
|
|
|
static struct ccdc_oper_config {
|
|
struct device *dev;
|
|
/* CCDC interface type */
|
|
enum vpfe_hw_if_type if_type;
|
|
/* Raw Bayer configuration */
|
|
struct ccdc_params_raw bayer;
|
|
/* YCbCr configuration */
|
|
struct ccdc_params_ycbcr ycbcr;
|
|
/* ccdc base address */
|
|
void __iomem *base_addr;
|
|
} ccdc_cfg = {
|
|
/* Raw configurations */
|
|
.bayer = {
|
|
.pix_fmt = CCDC_PIXFMT_RAW,
|
|
.frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
|
|
.win = CCDC_WIN_VGA,
|
|
.fid_pol = VPFE_PINPOL_POSITIVE,
|
|
.vd_pol = VPFE_PINPOL_POSITIVE,
|
|
.hd_pol = VPFE_PINPOL_POSITIVE,
|
|
.config_params = {
|
|
.data_sz = CCDC_DATA_10BITS,
|
|
},
|
|
},
|
|
.ycbcr = {
|
|
.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
|
|
.frm_fmt = CCDC_FRMFMT_INTERLACED,
|
|
.win = CCDC_WIN_PAL,
|
|
.fid_pol = VPFE_PINPOL_POSITIVE,
|
|
.vd_pol = VPFE_PINPOL_POSITIVE,
|
|
.hd_pol = VPFE_PINPOL_POSITIVE,
|
|
.bt656_enable = 1,
|
|
.pix_order = CCDC_PIXORDER_CBYCRY,
|
|
.buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED
|
|
},
|
|
};
|
|
|
|
#define CCDC_MAX_RAW_YUV_FORMATS 2
|
|
|
|
/* Raw Bayer formats */
|
|
static u32 ccdc_raw_bayer_pix_formats[] =
|
|
{V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16};
|
|
|
|
/* Raw YUV formats */
|
|
static u32 ccdc_raw_yuv_pix_formats[] =
|
|
{V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV};
|
|
|
|
/* CCDC Save/Restore context */
|
|
static u32 ccdc_ctx[CCDC_REG_END / sizeof(u32)];
|
|
|
|
/* register access routines */
|
|
static inline u32 regr(u32 offset)
|
|
{
|
|
return __raw_readl(ccdc_cfg.base_addr + offset);
|
|
}
|
|
|
|
static inline void regw(u32 val, u32 offset)
|
|
{
|
|
__raw_writel(val, ccdc_cfg.base_addr + offset);
|
|
}
|
|
|
|
static void ccdc_enable(int flag)
|
|
{
|
|
regw(flag, CCDC_PCR);
|
|
}
|
|
|
|
static void ccdc_enable_vport(int flag)
|
|
{
|
|
if (flag)
|
|
/* enable video port */
|
|
regw(CCDC_ENABLE_VIDEO_PORT, CCDC_FMTCFG);
|
|
else
|
|
regw(CCDC_DISABLE_VIDEO_PORT, CCDC_FMTCFG);
|
|
}
|
|
|
|
/*
|
|
* ccdc_setwin()
|
|
* This function will configure the window size
|
|
* to be capture in CCDC reg
|
|
*/
|
|
static void ccdc_setwin(struct v4l2_rect *image_win,
|
|
enum ccdc_frmfmt frm_fmt,
|
|
int ppc)
|
|
{
|
|
int horz_start, horz_nr_pixels;
|
|
int vert_start, vert_nr_lines;
|
|
int val = 0, mid_img = 0;
|
|
|
|
dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin...");
|
|
/*
|
|
* ppc - per pixel count. indicates how many pixels per cell
|
|
* output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
|
|
* raw capture this is 1
|
|
*/
|
|
horz_start = image_win->left << (ppc - 1);
|
|
horz_nr_pixels = (image_win->width << (ppc - 1)) - 1;
|
|
regw((horz_start << CCDC_HORZ_INFO_SPH_SHIFT) | horz_nr_pixels,
|
|
CCDC_HORZ_INFO);
|
|
|
|
vert_start = image_win->top;
|
|
|
|
if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
|
|
vert_nr_lines = (image_win->height >> 1) - 1;
|
|
vert_start >>= 1;
|
|
/* Since first line doesn't have any data */
|
|
vert_start += 1;
|
|
/* configure VDINT0 */
|
|
val = (vert_start << CCDC_VDINT_VDINT0_SHIFT);
|
|
regw(val, CCDC_VDINT);
|
|
|
|
} else {
|
|
/* Since first line doesn't have any data */
|
|
vert_start += 1;
|
|
vert_nr_lines = image_win->height - 1;
|
|
/*
|
|
* configure VDINT0 and VDINT1. VDINT1 will be at half
|
|
* of image height
|
|
*/
|
|
mid_img = vert_start + (image_win->height / 2);
|
|
val = (vert_start << CCDC_VDINT_VDINT0_SHIFT) |
|
|
(mid_img & CCDC_VDINT_VDINT1_MASK);
|
|
regw(val, CCDC_VDINT);
|
|
|
|
}
|
|
regw((vert_start << CCDC_VERT_START_SLV0_SHIFT) | vert_start,
|
|
CCDC_VERT_START);
|
|
regw(vert_nr_lines, CCDC_VERT_LINES);
|
|
dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin...");
|
|
}
|
|
|
|
static void ccdc_readregs(void)
|
|
{
|
|
unsigned int val = 0;
|
|
|
|
val = regr(CCDC_ALAW);
|
|
dev_notice(ccdc_cfg.dev, "\nReading 0x%x to ALAW...\n", val);
|
|
val = regr(CCDC_CLAMP);
|
|
dev_notice(ccdc_cfg.dev, "\nReading 0x%x to CLAMP...\n", val);
|
|
val = regr(CCDC_DCSUB);
|
|
dev_notice(ccdc_cfg.dev, "\nReading 0x%x to DCSUB...\n", val);
|
|
val = regr(CCDC_BLKCMP);
|
|
dev_notice(ccdc_cfg.dev, "\nReading 0x%x to BLKCMP...\n", val);
|
|
val = regr(CCDC_FPC_ADDR);
|
|
dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FPC_ADDR...\n", val);
|
|
val = regr(CCDC_FPC);
|
|
dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FPC...\n", val);
|
|
val = regr(CCDC_FMTCFG);
|
|
dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMTCFG...\n", val);
|
|
val = regr(CCDC_COLPTN);
|
|
dev_notice(ccdc_cfg.dev, "\nReading 0x%x to COLPTN...\n", val);
|
|
val = regr(CCDC_FMT_HORZ);
|
|
dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMT_HORZ...\n", val);
|
|
val = regr(CCDC_FMT_VERT);
|
|
dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMT_VERT...\n", val);
|
|
val = regr(CCDC_HSIZE_OFF);
|
|
dev_notice(ccdc_cfg.dev, "\nReading 0x%x to HSIZE_OFF...\n", val);
|
|
val = regr(CCDC_SDOFST);
|
|
dev_notice(ccdc_cfg.dev, "\nReading 0x%x to SDOFST...\n", val);
|
|
val = regr(CCDC_VP_OUT);
|
|
dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VP_OUT...\n", val);
|
|
val = regr(CCDC_SYN_MODE);
|
|
dev_notice(ccdc_cfg.dev, "\nReading 0x%x to SYN_MODE...\n", val);
|
|
val = regr(CCDC_HORZ_INFO);
|
|
dev_notice(ccdc_cfg.dev, "\nReading 0x%x to HORZ_INFO...\n", val);
|
|
val = regr(CCDC_VERT_START);
|
|
dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_START...\n", val);
|
|
val = regr(CCDC_VERT_LINES);
|
|
dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_LINES...\n", val);
|
|
}
|
|
|
|
static int ccdc_close(struct device *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* ccdc_restore_defaults()
|
|
* This function will write defaults to all CCDC registers
|
|
*/
|
|
static void ccdc_restore_defaults(void)
|
|
{
|
|
int i;
|
|
|
|
/* disable CCDC */
|
|
ccdc_enable(0);
|
|
/* set all registers to default value */
|
|
for (i = 4; i <= 0x94; i += 4)
|
|
regw(0, i);
|
|
regw(CCDC_NO_CULLING, CCDC_CULLING);
|
|
regw(CCDC_GAMMA_BITS_11_2, CCDC_ALAW);
|
|
}
|
|
|
|
static int ccdc_open(struct device *device)
|
|
{
|
|
ccdc_restore_defaults();
|
|
if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
|
|
ccdc_enable_vport(1);
|
|
return 0;
|
|
}
|
|
|
|
static void ccdc_sbl_reset(void)
|
|
{
|
|
vpss_clear_wbl_overflow(VPSS_PCR_CCDC_WBL_O);
|
|
}
|
|
|
|
/*
|
|
* ccdc_config_ycbcr()
|
|
* This function will configure CCDC for YCbCr video capture
|
|
*/
|
|
static void ccdc_config_ycbcr(void)
|
|
{
|
|
struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr;
|
|
u32 syn_mode;
|
|
|
|
dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr...");
|
|
/*
|
|
* first restore the CCDC registers to default values
|
|
* This is important since we assume default values to be set in
|
|
* a lot of registers that we didn't touch
|
|
*/
|
|
ccdc_restore_defaults();
|
|
|
|
/*
|
|
* configure pixel format, frame format, configure video frame
|
|
* format, enable output to SDRAM, enable internal timing generator
|
|
* and 8bit pack mode
|
|
*/
|
|
syn_mode = (((params->pix_fmt & CCDC_SYN_MODE_INPMOD_MASK) <<
|
|
CCDC_SYN_MODE_INPMOD_SHIFT) |
|
|
((params->frm_fmt & CCDC_SYN_FLDMODE_MASK) <<
|
|
CCDC_SYN_FLDMODE_SHIFT) | CCDC_VDHDEN_ENABLE |
|
|
CCDC_WEN_ENABLE | CCDC_DATA_PACK_ENABLE);
|
|
|
|
/* setup BT.656 sync mode */
|
|
if (params->bt656_enable) {
|
|
regw(CCDC_REC656IF_BT656_EN, CCDC_REC656IF);
|
|
|
|
/*
|
|
* configure the FID, VD, HD pin polarity,
|
|
* fld,hd pol positive, vd negative, 8-bit data
|
|
*/
|
|
syn_mode |= CCDC_SYN_MODE_VD_POL_NEGATIVE;
|
|
if (ccdc_cfg.if_type == VPFE_BT656_10BIT)
|
|
syn_mode |= CCDC_SYN_MODE_10BITS;
|
|
else
|
|
syn_mode |= CCDC_SYN_MODE_8BITS;
|
|
} else {
|
|
/* y/c external sync mode */
|
|
syn_mode |= (((params->fid_pol & CCDC_FID_POL_MASK) <<
|
|
CCDC_FID_POL_SHIFT) |
|
|
((params->hd_pol & CCDC_HD_POL_MASK) <<
|
|
CCDC_HD_POL_SHIFT) |
|
|
((params->vd_pol & CCDC_VD_POL_MASK) <<
|
|
CCDC_VD_POL_SHIFT));
|
|
}
|
|
regw(syn_mode, CCDC_SYN_MODE);
|
|
|
|
/* configure video window */
|
|
ccdc_setwin(¶ms->win, params->frm_fmt, 2);
|
|
|
|
/*
|
|
* configure the order of y cb cr in SDRAM, and disable latch
|
|
* internal register on vsync
|
|
*/
|
|
if (ccdc_cfg.if_type == VPFE_BT656_10BIT)
|
|
regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) |
|
|
CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_BW656_10BIT,
|
|
CCDC_CCDCFG);
|
|
else
|
|
regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) |
|
|
CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG);
|
|
|
|
/*
|
|
* configure the horizontal line offset. This should be a
|
|
* on 32 byte boundary. So clear LSB 5 bits
|
|
*/
|
|
regw(((params->win.width * 2 + 31) & ~0x1f), CCDC_HSIZE_OFF);
|
|
|
|
/* configure the memory line offset */
|
|
if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED)
|
|
/* two fields are interleaved in memory */
|
|
regw(CCDC_SDOFST_FIELD_INTERLEAVED, CCDC_SDOFST);
|
|
|
|
ccdc_sbl_reset();
|
|
dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n");
|
|
}
|
|
|
|
static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp)
|
|
{
|
|
u32 val;
|
|
|
|
if (!bclamp->enable) {
|
|
/* configure DCSub */
|
|
val = (bclamp->dc_sub) & CCDC_BLK_DC_SUB_MASK;
|
|
regw(val, CCDC_DCSUB);
|
|
dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to DCSUB...\n", val);
|
|
regw(CCDC_CLAMP_DEFAULT_VAL, CCDC_CLAMP);
|
|
dev_dbg(ccdc_cfg.dev, "\nWriting 0x0000 to CLAMP...\n");
|
|
return;
|
|
}
|
|
/*
|
|
* Configure gain, Start pixel, No of line to be avg,
|
|
* No of pixel/line to be avg, & Enable the Black clamping
|
|
*/
|
|
val = ((bclamp->sgain & CCDC_BLK_SGAIN_MASK) |
|
|
((bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) <<
|
|
CCDC_BLK_ST_PXL_SHIFT) |
|
|
((bclamp->sample_ln & CCDC_BLK_SAMPLE_LINE_MASK) <<
|
|
CCDC_BLK_SAMPLE_LINE_SHIFT) |
|
|
((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) <<
|
|
CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE);
|
|
regw(val, CCDC_CLAMP);
|
|
dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to CLAMP...\n", val);
|
|
/* If Black clamping is enable then make dcsub 0 */
|
|
regw(CCDC_DCSUB_DEFAULT_VAL, CCDC_DCSUB);
|
|
dev_dbg(ccdc_cfg.dev, "\nWriting 0x00000000 to DCSUB...\n");
|
|
}
|
|
|
|
static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp)
|
|
{
|
|
u32 val;
|
|
|
|
val = ((bcomp->b & CCDC_BLK_COMP_MASK) |
|
|
((bcomp->gb & CCDC_BLK_COMP_MASK) <<
|
|
CCDC_BLK_COMP_GB_COMP_SHIFT) |
|
|
((bcomp->gr & CCDC_BLK_COMP_MASK) <<
|
|
CCDC_BLK_COMP_GR_COMP_SHIFT) |
|
|
((bcomp->r & CCDC_BLK_COMP_MASK) <<
|
|
CCDC_BLK_COMP_R_COMP_SHIFT));
|
|
regw(val, CCDC_BLKCMP);
|
|
}
|
|
|
|
/*
|
|
* ccdc_config_raw()
|
|
* This function will configure CCDC for Raw capture mode
|
|
*/
|
|
static void ccdc_config_raw(void)
|
|
{
|
|
struct ccdc_params_raw *params = &ccdc_cfg.bayer;
|
|
struct ccdc_config_params_raw *config_params =
|
|
&ccdc_cfg.bayer.config_params;
|
|
unsigned int syn_mode = 0;
|
|
unsigned int val;
|
|
|
|
dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw...");
|
|
|
|
/* Reset CCDC */
|
|
ccdc_restore_defaults();
|
|
|
|
/* Disable latching function registers on VSYNC */
|
|
regw(CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG);
|
|
|
|
/*
|
|
* Configure the vertical sync polarity(SYN_MODE.VDPOL),
|
|
* horizontal sync polarity (SYN_MODE.HDPOL), frame id polarity
|
|
* (SYN_MODE.FLDPOL), frame format(progressive or interlace),
|
|
* data size(SYNMODE.DATSIZ), &pixel format (Input mode), output
|
|
* SDRAM, enable internal timing generator
|
|
*/
|
|
syn_mode =
|
|
(((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) |
|
|
((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) |
|
|
((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) |
|
|
((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) |
|
|
((config_params->data_sz & CCDC_DATA_SZ_MASK) <<
|
|
CCDC_DATA_SZ_SHIFT) |
|
|
((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT) |
|
|
CCDC_WEN_ENABLE | CCDC_VDHDEN_ENABLE);
|
|
|
|
/* Enable and configure aLaw register if needed */
|
|
if (config_params->alaw.enable) {
|
|
val = ((config_params->alaw.gamma_wd &
|
|
CCDC_ALAW_GAMMA_WD_MASK) | CCDC_ALAW_ENABLE);
|
|
regw(val, CCDC_ALAW);
|
|
dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to ALAW...\n", val);
|
|
}
|
|
|
|
/* Configure video window */
|
|
ccdc_setwin(¶ms->win, params->frm_fmt, CCDC_PPC_RAW);
|
|
|
|
/* Configure Black Clamp */
|
|
ccdc_config_black_clamp(&config_params->blk_clamp);
|
|
|
|
/* Configure Black level compensation */
|
|
ccdc_config_black_compense(&config_params->blk_comp);
|
|
|
|
/* If data size is 8 bit then pack the data */
|
|
if ((config_params->data_sz == CCDC_DATA_8BITS) ||
|
|
config_params->alaw.enable)
|
|
syn_mode |= CCDC_DATA_PACK_ENABLE;
|
|
|
|
/* disable video port */
|
|
val = CCDC_DISABLE_VIDEO_PORT;
|
|
|
|
if (config_params->data_sz == CCDC_DATA_8BITS)
|
|
val |= (CCDC_DATA_10BITS & CCDC_FMTCFG_VPIN_MASK)
|
|
<< CCDC_FMTCFG_VPIN_SHIFT;
|
|
else
|
|
val |= (config_params->data_sz & CCDC_FMTCFG_VPIN_MASK)
|
|
<< CCDC_FMTCFG_VPIN_SHIFT;
|
|
/* Write value in FMTCFG */
|
|
regw(val, CCDC_FMTCFG);
|
|
|
|
dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMTCFG...\n", val);
|
|
/* Configure the color pattern according to mt9t001 sensor */
|
|
regw(CCDC_COLPTN_VAL, CCDC_COLPTN);
|
|
|
|
dev_dbg(ccdc_cfg.dev, "\nWriting 0xBB11BB11 to COLPTN...\n");
|
|
/*
|
|
* Configure Data formatter(Video port) pixel selection
|
|
* (FMT_HORZ, FMT_VERT)
|
|
*/
|
|
val = ((params->win.left & CCDC_FMT_HORZ_FMTSPH_MASK) <<
|
|
CCDC_FMT_HORZ_FMTSPH_SHIFT) |
|
|
(params->win.width & CCDC_FMT_HORZ_FMTLNH_MASK);
|
|
regw(val, CCDC_FMT_HORZ);
|
|
|
|
dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMT_HORZ...\n", val);
|
|
val = (params->win.top & CCDC_FMT_VERT_FMTSLV_MASK)
|
|
<< CCDC_FMT_VERT_FMTSLV_SHIFT;
|
|
if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE)
|
|
val |= (params->win.height) & CCDC_FMT_VERT_FMTLNV_MASK;
|
|
else
|
|
val |= (params->win.height >> 1) & CCDC_FMT_VERT_FMTLNV_MASK;
|
|
|
|
dev_dbg(ccdc_cfg.dev, "\nparams->win.height 0x%x ...\n",
|
|
params->win.height);
|
|
regw(val, CCDC_FMT_VERT);
|
|
|
|
dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMT_VERT...\n", val);
|
|
|
|
dev_dbg(ccdc_cfg.dev, "\nbelow regw(val, FMT_VERT)...");
|
|
|
|
/*
|
|
* Configure Horizontal offset register. If pack 8 is enabled then
|
|
* 1 pixel will take 1 byte
|
|
*/
|
|
if ((config_params->data_sz == CCDC_DATA_8BITS) ||
|
|
config_params->alaw.enable)
|
|
regw((params->win.width + CCDC_32BYTE_ALIGN_VAL) &
|
|
CCDC_HSIZE_OFF_MASK, CCDC_HSIZE_OFF);
|
|
else
|
|
/* else one pixel will take 2 byte */
|
|
regw(((params->win.width * CCDC_TWO_BYTES_PER_PIXEL) +
|
|
CCDC_32BYTE_ALIGN_VAL) & CCDC_HSIZE_OFF_MASK,
|
|
CCDC_HSIZE_OFF);
|
|
|
|
/* Set value for SDOFST */
|
|
if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
|
|
if (params->image_invert_enable) {
|
|
/* For intelace inverse mode */
|
|
regw(CCDC_INTERLACED_IMAGE_INVERT, CCDC_SDOFST);
|
|
dev_dbg(ccdc_cfg.dev, "\nWriting 0x4B6D to SDOFST..\n");
|
|
}
|
|
|
|
else {
|
|
/* For intelace non inverse mode */
|
|
regw(CCDC_INTERLACED_NO_IMAGE_INVERT, CCDC_SDOFST);
|
|
dev_dbg(ccdc_cfg.dev, "\nWriting 0x0249 to SDOFST..\n");
|
|
}
|
|
} else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
|
|
regw(CCDC_PROGRESSIVE_NO_IMAGE_INVERT, CCDC_SDOFST);
|
|
dev_dbg(ccdc_cfg.dev, "\nWriting 0x0000 to SDOFST...\n");
|
|
}
|
|
|
|
/*
|
|
* Configure video port pixel selection (VPOUT)
|
|
* Here -1 is to make the height value less than FMT_VERT.FMTLNV
|
|
*/
|
|
if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE)
|
|
val = (((params->win.height - 1) & CCDC_VP_OUT_VERT_NUM_MASK))
|
|
<< CCDC_VP_OUT_VERT_NUM_SHIFT;
|
|
else
|
|
val =
|
|
((((params->win.height >> CCDC_INTERLACED_HEIGHT_SHIFT) -
|
|
1) & CCDC_VP_OUT_VERT_NUM_MASK)) <<
|
|
CCDC_VP_OUT_VERT_NUM_SHIFT;
|
|
|
|
val |= ((((params->win.width))) & CCDC_VP_OUT_HORZ_NUM_MASK)
|
|
<< CCDC_VP_OUT_HORZ_NUM_SHIFT;
|
|
val |= (params->win.left) & CCDC_VP_OUT_HORZ_ST_MASK;
|
|
regw(val, CCDC_VP_OUT);
|
|
|
|
dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to VP_OUT...\n", val);
|
|
regw(syn_mode, CCDC_SYN_MODE);
|
|
dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to SYN_MODE...\n", syn_mode);
|
|
|
|
ccdc_sbl_reset();
|
|
dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw...");
|
|
ccdc_readregs();
|
|
}
|
|
|
|
static int ccdc_configure(void)
|
|
{
|
|
if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
|
|
ccdc_config_raw();
|
|
else
|
|
ccdc_config_ycbcr();
|
|
return 0;
|
|
}
|
|
|
|
static int ccdc_set_buftype(enum ccdc_buftype buf_type)
|
|
{
|
|
if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
|
|
ccdc_cfg.bayer.buf_type = buf_type;
|
|
else
|
|
ccdc_cfg.ycbcr.buf_type = buf_type;
|
|
return 0;
|
|
}
|
|
|
|
static enum ccdc_buftype ccdc_get_buftype(void)
|
|
{
|
|
if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
|
|
return ccdc_cfg.bayer.buf_type;
|
|
return ccdc_cfg.ycbcr.buf_type;
|
|
}
|
|
|
|
static int ccdc_enum_pix(u32 *pix, int i)
|
|
{
|
|
int ret = -EINVAL;
|
|
if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
|
|
if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) {
|
|
*pix = ccdc_raw_bayer_pix_formats[i];
|
|
ret = 0;
|
|
}
|
|
} else {
|
|
if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) {
|
|
*pix = ccdc_raw_yuv_pix_formats[i];
|
|
ret = 0;
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int ccdc_set_pixel_format(u32 pixfmt)
|
|
{
|
|
if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
|
|
ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
|
|
if (pixfmt == V4L2_PIX_FMT_SBGGR8)
|
|
ccdc_cfg.bayer.config_params.alaw.enable = 1;
|
|
else if (pixfmt != V4L2_PIX_FMT_SBGGR16)
|
|
return -EINVAL;
|
|
} else {
|
|
if (pixfmt == V4L2_PIX_FMT_YUYV)
|
|
ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
|
|
else if (pixfmt == V4L2_PIX_FMT_UYVY)
|
|
ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static u32 ccdc_get_pixel_format(void)
|
|
{
|
|
struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw;
|
|
u32 pixfmt;
|
|
|
|
if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
|
|
if (alaw->enable)
|
|
pixfmt = V4L2_PIX_FMT_SBGGR8;
|
|
else
|
|
pixfmt = V4L2_PIX_FMT_SBGGR16;
|
|
else {
|
|
if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
|
|
pixfmt = V4L2_PIX_FMT_YUYV;
|
|
else
|
|
pixfmt = V4L2_PIX_FMT_UYVY;
|
|
}
|
|
return pixfmt;
|
|
}
|
|
|
|
static int ccdc_set_image_window(struct v4l2_rect *win)
|
|
{
|
|
if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
|
|
ccdc_cfg.bayer.win = *win;
|
|
else
|
|
ccdc_cfg.ycbcr.win = *win;
|
|
return 0;
|
|
}
|
|
|
|
static void ccdc_get_image_window(struct v4l2_rect *win)
|
|
{
|
|
if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
|
|
*win = ccdc_cfg.bayer.win;
|
|
else
|
|
*win = ccdc_cfg.ycbcr.win;
|
|
}
|
|
|
|
static unsigned int ccdc_get_line_length(void)
|
|
{
|
|
struct ccdc_config_params_raw *config_params =
|
|
&ccdc_cfg.bayer.config_params;
|
|
unsigned int len;
|
|
|
|
if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
|
|
if ((config_params->alaw.enable) ||
|
|
(config_params->data_sz == CCDC_DATA_8BITS))
|
|
len = ccdc_cfg.bayer.win.width;
|
|
else
|
|
len = ccdc_cfg.bayer.win.width * 2;
|
|
} else
|
|
len = ccdc_cfg.ycbcr.win.width * 2;
|
|
return ALIGN(len, 32);
|
|
}
|
|
|
|
static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt)
|
|
{
|
|
if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
|
|
ccdc_cfg.bayer.frm_fmt = frm_fmt;
|
|
else
|
|
ccdc_cfg.ycbcr.frm_fmt = frm_fmt;
|
|
return 0;
|
|
}
|
|
|
|
static enum ccdc_frmfmt ccdc_get_frame_format(void)
|
|
{
|
|
if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
|
|
return ccdc_cfg.bayer.frm_fmt;
|
|
else
|
|
return ccdc_cfg.ycbcr.frm_fmt;
|
|
}
|
|
|
|
static int ccdc_getfid(void)
|
|
{
|
|
return (regr(CCDC_SYN_MODE) >> 15) & 1;
|
|
}
|
|
|
|
/* misc operations */
|
|
static inline void ccdc_setfbaddr(unsigned long addr)
|
|
{
|
|
regw(addr & 0xffffffe0, CCDC_SDR_ADDR);
|
|
}
|
|
|
|
static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params)
|
|
{
|
|
ccdc_cfg.if_type = params->if_type;
|
|
|
|
switch (params->if_type) {
|
|
case VPFE_BT656:
|
|
case VPFE_YCBCR_SYNC_16:
|
|
case VPFE_YCBCR_SYNC_8:
|
|
case VPFE_BT656_10BIT:
|
|
ccdc_cfg.ycbcr.vd_pol = params->vdpol;
|
|
ccdc_cfg.ycbcr.hd_pol = params->hdpol;
|
|
break;
|
|
default:
|
|
/* TODO add support for raw bayer here */
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void ccdc_save_context(void)
|
|
{
|
|
ccdc_ctx[CCDC_PCR >> 2] = regr(CCDC_PCR);
|
|
ccdc_ctx[CCDC_SYN_MODE >> 2] = regr(CCDC_SYN_MODE);
|
|
ccdc_ctx[CCDC_HD_VD_WID >> 2] = regr(CCDC_HD_VD_WID);
|
|
ccdc_ctx[CCDC_PIX_LINES >> 2] = regr(CCDC_PIX_LINES);
|
|
ccdc_ctx[CCDC_HORZ_INFO >> 2] = regr(CCDC_HORZ_INFO);
|
|
ccdc_ctx[CCDC_VERT_START >> 2] = regr(CCDC_VERT_START);
|
|
ccdc_ctx[CCDC_VERT_LINES >> 2] = regr(CCDC_VERT_LINES);
|
|
ccdc_ctx[CCDC_CULLING >> 2] = regr(CCDC_CULLING);
|
|
ccdc_ctx[CCDC_HSIZE_OFF >> 2] = regr(CCDC_HSIZE_OFF);
|
|
ccdc_ctx[CCDC_SDOFST >> 2] = regr(CCDC_SDOFST);
|
|
ccdc_ctx[CCDC_SDR_ADDR >> 2] = regr(CCDC_SDR_ADDR);
|
|
ccdc_ctx[CCDC_CLAMP >> 2] = regr(CCDC_CLAMP);
|
|
ccdc_ctx[CCDC_DCSUB >> 2] = regr(CCDC_DCSUB);
|
|
ccdc_ctx[CCDC_COLPTN >> 2] = regr(CCDC_COLPTN);
|
|
ccdc_ctx[CCDC_BLKCMP >> 2] = regr(CCDC_BLKCMP);
|
|
ccdc_ctx[CCDC_FPC >> 2] = regr(CCDC_FPC);
|
|
ccdc_ctx[CCDC_FPC_ADDR >> 2] = regr(CCDC_FPC_ADDR);
|
|
ccdc_ctx[CCDC_VDINT >> 2] = regr(CCDC_VDINT);
|
|
ccdc_ctx[CCDC_ALAW >> 2] = regr(CCDC_ALAW);
|
|
ccdc_ctx[CCDC_REC656IF >> 2] = regr(CCDC_REC656IF);
|
|
ccdc_ctx[CCDC_CCDCFG >> 2] = regr(CCDC_CCDCFG);
|
|
ccdc_ctx[CCDC_FMTCFG >> 2] = regr(CCDC_FMTCFG);
|
|
ccdc_ctx[CCDC_FMT_HORZ >> 2] = regr(CCDC_FMT_HORZ);
|
|
ccdc_ctx[CCDC_FMT_VERT >> 2] = regr(CCDC_FMT_VERT);
|
|
ccdc_ctx[CCDC_FMT_ADDR0 >> 2] = regr(CCDC_FMT_ADDR0);
|
|
ccdc_ctx[CCDC_FMT_ADDR1 >> 2] = regr(CCDC_FMT_ADDR1);
|
|
ccdc_ctx[CCDC_FMT_ADDR2 >> 2] = regr(CCDC_FMT_ADDR2);
|
|
ccdc_ctx[CCDC_FMT_ADDR3 >> 2] = regr(CCDC_FMT_ADDR3);
|
|
ccdc_ctx[CCDC_FMT_ADDR4 >> 2] = regr(CCDC_FMT_ADDR4);
|
|
ccdc_ctx[CCDC_FMT_ADDR5 >> 2] = regr(CCDC_FMT_ADDR5);
|
|
ccdc_ctx[CCDC_FMT_ADDR6 >> 2] = regr(CCDC_FMT_ADDR6);
|
|
ccdc_ctx[CCDC_FMT_ADDR7 >> 2] = regr(CCDC_FMT_ADDR7);
|
|
ccdc_ctx[CCDC_PRGEVEN_0 >> 2] = regr(CCDC_PRGEVEN_0);
|
|
ccdc_ctx[CCDC_PRGEVEN_1 >> 2] = regr(CCDC_PRGEVEN_1);
|
|
ccdc_ctx[CCDC_PRGODD_0 >> 2] = regr(CCDC_PRGODD_0);
|
|
ccdc_ctx[CCDC_PRGODD_1 >> 2] = regr(CCDC_PRGODD_1);
|
|
ccdc_ctx[CCDC_VP_OUT >> 2] = regr(CCDC_VP_OUT);
|
|
}
|
|
|
|
static void ccdc_restore_context(void)
|
|
{
|
|
regw(ccdc_ctx[CCDC_SYN_MODE >> 2], CCDC_SYN_MODE);
|
|
regw(ccdc_ctx[CCDC_HD_VD_WID >> 2], CCDC_HD_VD_WID);
|
|
regw(ccdc_ctx[CCDC_PIX_LINES >> 2], CCDC_PIX_LINES);
|
|
regw(ccdc_ctx[CCDC_HORZ_INFO >> 2], CCDC_HORZ_INFO);
|
|
regw(ccdc_ctx[CCDC_VERT_START >> 2], CCDC_VERT_START);
|
|
regw(ccdc_ctx[CCDC_VERT_LINES >> 2], CCDC_VERT_LINES);
|
|
regw(ccdc_ctx[CCDC_CULLING >> 2], CCDC_CULLING);
|
|
regw(ccdc_ctx[CCDC_HSIZE_OFF >> 2], CCDC_HSIZE_OFF);
|
|
regw(ccdc_ctx[CCDC_SDOFST >> 2], CCDC_SDOFST);
|
|
regw(ccdc_ctx[CCDC_SDR_ADDR >> 2], CCDC_SDR_ADDR);
|
|
regw(ccdc_ctx[CCDC_CLAMP >> 2], CCDC_CLAMP);
|
|
regw(ccdc_ctx[CCDC_DCSUB >> 2], CCDC_DCSUB);
|
|
regw(ccdc_ctx[CCDC_COLPTN >> 2], CCDC_COLPTN);
|
|
regw(ccdc_ctx[CCDC_BLKCMP >> 2], CCDC_BLKCMP);
|
|
regw(ccdc_ctx[CCDC_FPC >> 2], CCDC_FPC);
|
|
regw(ccdc_ctx[CCDC_FPC_ADDR >> 2], CCDC_FPC_ADDR);
|
|
regw(ccdc_ctx[CCDC_VDINT >> 2], CCDC_VDINT);
|
|
regw(ccdc_ctx[CCDC_ALAW >> 2], CCDC_ALAW);
|
|
regw(ccdc_ctx[CCDC_REC656IF >> 2], CCDC_REC656IF);
|
|
regw(ccdc_ctx[CCDC_CCDCFG >> 2], CCDC_CCDCFG);
|
|
regw(ccdc_ctx[CCDC_FMTCFG >> 2], CCDC_FMTCFG);
|
|
regw(ccdc_ctx[CCDC_FMT_HORZ >> 2], CCDC_FMT_HORZ);
|
|
regw(ccdc_ctx[CCDC_FMT_VERT >> 2], CCDC_FMT_VERT);
|
|
regw(ccdc_ctx[CCDC_FMT_ADDR0 >> 2], CCDC_FMT_ADDR0);
|
|
regw(ccdc_ctx[CCDC_FMT_ADDR1 >> 2], CCDC_FMT_ADDR1);
|
|
regw(ccdc_ctx[CCDC_FMT_ADDR2 >> 2], CCDC_FMT_ADDR2);
|
|
regw(ccdc_ctx[CCDC_FMT_ADDR3 >> 2], CCDC_FMT_ADDR3);
|
|
regw(ccdc_ctx[CCDC_FMT_ADDR4 >> 2], CCDC_FMT_ADDR4);
|
|
regw(ccdc_ctx[CCDC_FMT_ADDR5 >> 2], CCDC_FMT_ADDR5);
|
|
regw(ccdc_ctx[CCDC_FMT_ADDR6 >> 2], CCDC_FMT_ADDR6);
|
|
regw(ccdc_ctx[CCDC_FMT_ADDR7 >> 2], CCDC_FMT_ADDR7);
|
|
regw(ccdc_ctx[CCDC_PRGEVEN_0 >> 2], CCDC_PRGEVEN_0);
|
|
regw(ccdc_ctx[CCDC_PRGEVEN_1 >> 2], CCDC_PRGEVEN_1);
|
|
regw(ccdc_ctx[CCDC_PRGODD_0 >> 2], CCDC_PRGODD_0);
|
|
regw(ccdc_ctx[CCDC_PRGODD_1 >> 2], CCDC_PRGODD_1);
|
|
regw(ccdc_ctx[CCDC_VP_OUT >> 2], CCDC_VP_OUT);
|
|
regw(ccdc_ctx[CCDC_PCR >> 2], CCDC_PCR);
|
|
}
|
|
static const struct ccdc_hw_device ccdc_hw_dev = {
|
|
.name = "DM6446 CCDC",
|
|
.owner = THIS_MODULE,
|
|
.hw_ops = {
|
|
.open = ccdc_open,
|
|
.close = ccdc_close,
|
|
.reset = ccdc_sbl_reset,
|
|
.enable = ccdc_enable,
|
|
.set_hw_if_params = ccdc_set_hw_if_params,
|
|
.configure = ccdc_configure,
|
|
.set_buftype = ccdc_set_buftype,
|
|
.get_buftype = ccdc_get_buftype,
|
|
.enum_pix = ccdc_enum_pix,
|
|
.set_pixel_format = ccdc_set_pixel_format,
|
|
.get_pixel_format = ccdc_get_pixel_format,
|
|
.set_frame_format = ccdc_set_frame_format,
|
|
.get_frame_format = ccdc_get_frame_format,
|
|
.set_image_window = ccdc_set_image_window,
|
|
.get_image_window = ccdc_get_image_window,
|
|
.get_line_length = ccdc_get_line_length,
|
|
.setfbaddr = ccdc_setfbaddr,
|
|
.getfid = ccdc_getfid,
|
|
},
|
|
};
|
|
|
|
static int dm644x_ccdc_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
int status = 0;
|
|
|
|
/*
|
|
* first try to register with vpfe. If not correct platform, then we
|
|
* don't have to iomap
|
|
*/
|
|
status = vpfe_register_ccdc_device(&ccdc_hw_dev);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
status = -ENODEV;
|
|
goto fail_nores;
|
|
}
|
|
|
|
res = request_mem_region(res->start, resource_size(res), res->name);
|
|
if (!res) {
|
|
status = -EBUSY;
|
|
goto fail_nores;
|
|
}
|
|
|
|
ccdc_cfg.base_addr = ioremap_nocache(res->start, resource_size(res));
|
|
if (!ccdc_cfg.base_addr) {
|
|
status = -ENOMEM;
|
|
goto fail_nomem;
|
|
}
|
|
|
|
ccdc_cfg.dev = &pdev->dev;
|
|
printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name);
|
|
return 0;
|
|
fail_nomem:
|
|
release_mem_region(res->start, resource_size(res));
|
|
fail_nores:
|
|
vpfe_unregister_ccdc_device(&ccdc_hw_dev);
|
|
return status;
|
|
}
|
|
|
|
static int dm644x_ccdc_remove(struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
|
|
iounmap(ccdc_cfg.base_addr);
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (res)
|
|
release_mem_region(res->start, resource_size(res));
|
|
vpfe_unregister_ccdc_device(&ccdc_hw_dev);
|
|
return 0;
|
|
}
|
|
|
|
static int dm644x_ccdc_suspend(struct device *dev)
|
|
{
|
|
/* Save CCDC context */
|
|
ccdc_save_context();
|
|
/* Disable CCDC */
|
|
ccdc_enable(0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dm644x_ccdc_resume(struct device *dev)
|
|
{
|
|
/* Restore CCDC context */
|
|
ccdc_restore_context();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops dm644x_ccdc_pm_ops = {
|
|
.suspend = dm644x_ccdc_suspend,
|
|
.resume = dm644x_ccdc_resume,
|
|
};
|
|
|
|
static struct platform_driver dm644x_ccdc_driver = {
|
|
.driver = {
|
|
.name = "dm644x_ccdc",
|
|
.pm = &dm644x_ccdc_pm_ops,
|
|
},
|
|
.remove = dm644x_ccdc_remove,
|
|
.probe = dm644x_ccdc_probe,
|
|
};
|
|
|
|
module_platform_driver(dm644x_ccdc_driver);
|