673 lines
18 KiB
C
673 lines
18 KiB
C
/*
|
|
* Synopsys DesignWare I2C adapter driver (master only).
|
|
*
|
|
* Based on the TI DAVINCI I2C adapter driver.
|
|
*
|
|
* Copyright (C) 2006 Texas Instruments.
|
|
* Copyright (C) 2007 MontaVista Software Inc.
|
|
* Copyright (C) 2009 Provigent Ltd.
|
|
*
|
|
* ----------------------------------------------------------------------------
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
* ----------------------------------------------------------------------------
|
|
*
|
|
*/
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/export.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm_runtime.h>
|
|
|
|
#include "i2c-designware-core.h"
|
|
|
|
static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev)
|
|
{
|
|
/* Configure Tx/Rx FIFO threshold levels */
|
|
dw_writel(dev, dev->tx_fifo_depth / 2, DW_IC_TX_TL);
|
|
dw_writel(dev, 0, DW_IC_RX_TL);
|
|
|
|
/* Configure the I2C master */
|
|
dw_writel(dev, dev->master_cfg, DW_IC_CON);
|
|
}
|
|
|
|
/**
|
|
* i2c_dw_init() - Initialize the designware I2C master hardware
|
|
* @dev: device private data
|
|
*
|
|
* This functions configures and enables the I2C master.
|
|
* This function is called during I2C init function, and in case of timeout at
|
|
* run time.
|
|
*/
|
|
static int i2c_dw_init_master(struct dw_i2c_dev *dev)
|
|
{
|
|
u32 hcnt, lcnt;
|
|
u32 reg, comp_param1;
|
|
u32 sda_falling_time, scl_falling_time;
|
|
int ret;
|
|
|
|
ret = i2c_dw_acquire_lock(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
reg = dw_readl(dev, DW_IC_COMP_TYPE);
|
|
if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
|
|
/* Configure register endianess access */
|
|
dev->flags |= ACCESS_SWAP;
|
|
} else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
|
|
/* Configure register access mode 16bit */
|
|
dev->flags |= ACCESS_16BIT;
|
|
} else if (reg != DW_IC_COMP_TYPE_VALUE) {
|
|
dev_err(dev->dev,
|
|
"Unknown Synopsys component type: 0x%08x\n", reg);
|
|
i2c_dw_release_lock(dev);
|
|
return -ENODEV;
|
|
}
|
|
|
|
comp_param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
|
|
|
|
/* Disable the adapter */
|
|
__i2c_dw_enable_and_wait(dev, false);
|
|
|
|
/* Set standard and fast speed deviders for high/low periods */
|
|
|
|
sda_falling_time = dev->sda_falling_time ?: 300; /* ns */
|
|
scl_falling_time = dev->scl_falling_time ?: 300; /* ns */
|
|
|
|
/* Set SCL timing parameters for standard-mode */
|
|
if (dev->ss_hcnt && dev->ss_lcnt) {
|
|
hcnt = dev->ss_hcnt;
|
|
lcnt = dev->ss_lcnt;
|
|
} else {
|
|
hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev),
|
|
4000, /* tHD;STA = tHIGH = 4.0 us */
|
|
sda_falling_time,
|
|
0, /* 0: DW default, 1: Ideal */
|
|
0); /* No offset */
|
|
lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev),
|
|
4700, /* tLOW = 4.7 us */
|
|
scl_falling_time,
|
|
0); /* No offset */
|
|
}
|
|
dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT);
|
|
dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
|
|
dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
|
|
|
|
/* Set SCL timing parameters for fast-mode or fast-mode plus */
|
|
if ((dev->clk_freq == 1000000) && dev->fp_hcnt && dev->fp_lcnt) {
|
|
hcnt = dev->fp_hcnt;
|
|
lcnt = dev->fp_lcnt;
|
|
} else if (dev->fs_hcnt && dev->fs_lcnt) {
|
|
hcnt = dev->fs_hcnt;
|
|
lcnt = dev->fs_lcnt;
|
|
} else {
|
|
hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev),
|
|
600, /* tHD;STA = tHIGH = 0.6 us */
|
|
sda_falling_time,
|
|
0, /* 0: DW default, 1: Ideal */
|
|
0); /* No offset */
|
|
lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev),
|
|
1300, /* tLOW = 1.3 us */
|
|
scl_falling_time,
|
|
0); /* No offset */
|
|
}
|
|
dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT);
|
|
dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
|
|
dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
|
|
|
|
if ((dev->master_cfg & DW_IC_CON_SPEED_MASK) ==
|
|
DW_IC_CON_SPEED_HIGH) {
|
|
if ((comp_param1 & DW_IC_COMP_PARAM_1_SPEED_MODE_MASK)
|
|
!= DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH) {
|
|
dev_err(dev->dev, "High Speed not supported!\n");
|
|
dev->master_cfg &= ~DW_IC_CON_SPEED_MASK;
|
|
dev->master_cfg |= DW_IC_CON_SPEED_FAST;
|
|
} else if (dev->hs_hcnt && dev->hs_lcnt) {
|
|
hcnt = dev->hs_hcnt;
|
|
lcnt = dev->hs_lcnt;
|
|
dw_writel(dev, hcnt, DW_IC_HS_SCL_HCNT);
|
|
dw_writel(dev, lcnt, DW_IC_HS_SCL_LCNT);
|
|
dev_dbg(dev->dev, "HighSpeed-mode HCNT:LCNT = %d:%d\n",
|
|
hcnt, lcnt);
|
|
}
|
|
}
|
|
|
|
/* Configure SDA Hold Time if required */
|
|
reg = dw_readl(dev, DW_IC_COMP_VERSION);
|
|
if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
|
|
if (!dev->sda_hold_time) {
|
|
/* Keep previous hold time setting if no one set it */
|
|
dev->sda_hold_time = dw_readl(dev, DW_IC_SDA_HOLD);
|
|
}
|
|
/*
|
|
* Workaround for avoiding TX arbitration lost in case I2C
|
|
* slave pulls SDA down "too quickly" after falling egde of
|
|
* SCL by enabling non-zero SDA RX hold. Specification says it
|
|
* extends incoming SDA low to high transition while SCL is
|
|
* high but it apprears to help also above issue.
|
|
*/
|
|
if (!(dev->sda_hold_time & DW_IC_SDA_HOLD_RX_MASK))
|
|
dev->sda_hold_time |= 1 << DW_IC_SDA_HOLD_RX_SHIFT;
|
|
dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
|
|
} else {
|
|
dev_warn(dev->dev,
|
|
"Hardware too old to adjust SDA hold time.\n");
|
|
}
|
|
|
|
i2c_dw_configure_fifo_master(dev);
|
|
i2c_dw_release_lock(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
|
|
{
|
|
struct i2c_msg *msgs = dev->msgs;
|
|
u32 ic_con, ic_tar = 0;
|
|
|
|
/* Disable the adapter */
|
|
__i2c_dw_enable_and_wait(dev, false);
|
|
|
|
/* If the slave address is ten bit address, enable 10BITADDR */
|
|
ic_con = dw_readl(dev, DW_IC_CON);
|
|
if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) {
|
|
ic_con |= DW_IC_CON_10BITADDR_MASTER;
|
|
/*
|
|
* If I2C_DYNAMIC_TAR_UPDATE is set, the 10-bit addressing
|
|
* mode has to be enabled via bit 12 of IC_TAR register.
|
|
* We set it always as I2C_DYNAMIC_TAR_UPDATE can't be
|
|
* detected from registers.
|
|
*/
|
|
ic_tar = DW_IC_TAR_10BITADDR_MASTER;
|
|
} else {
|
|
ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
|
|
}
|
|
|
|
dw_writel(dev, ic_con, DW_IC_CON);
|
|
|
|
/*
|
|
* Set the slave (target) address and enable 10-bit addressing mode
|
|
* if applicable.
|
|
*/
|
|
dw_writel(dev, msgs[dev->msg_write_idx].addr | ic_tar, DW_IC_TAR);
|
|
|
|
/* Enforce disabled interrupts (due to HW issues) */
|
|
i2c_dw_disable_int(dev);
|
|
|
|
/* Enable the adapter */
|
|
__i2c_dw_enable(dev, true);
|
|
|
|
/* Clear and enable interrupts */
|
|
dw_readl(dev, DW_IC_CLR_INTR);
|
|
dw_writel(dev, DW_IC_INTR_MASTER_MASK, DW_IC_INTR_MASK);
|
|
}
|
|
|
|
/*
|
|
* Initiate (and continue) low level master read/write transaction.
|
|
* This function is only called from i2c_dw_isr, and pumping i2c_msg
|
|
* messages into the tx buffer. Even if the size of i2c_msg data is
|
|
* longer than the size of the tx buffer, it handles everything.
|
|
*/
|
|
static void
|
|
i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
|
|
{
|
|
struct i2c_msg *msgs = dev->msgs;
|
|
u32 intr_mask;
|
|
int tx_limit, rx_limit;
|
|
u32 addr = msgs[dev->msg_write_idx].addr;
|
|
u32 buf_len = dev->tx_buf_len;
|
|
u8 *buf = dev->tx_buf;
|
|
bool need_restart = false;
|
|
|
|
intr_mask = DW_IC_INTR_MASTER_MASK;
|
|
|
|
for (; dev->msg_write_idx < dev->msgs_num; dev->msg_write_idx++) {
|
|
u32 flags = msgs[dev->msg_write_idx].flags;
|
|
|
|
/*
|
|
* If target address has changed, we need to
|
|
* reprogram the target address in the I2C
|
|
* adapter when we are done with this transfer.
|
|
*/
|
|
if (msgs[dev->msg_write_idx].addr != addr) {
|
|
dev_err(dev->dev,
|
|
"%s: invalid target address\n", __func__);
|
|
dev->msg_err = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
if (msgs[dev->msg_write_idx].len == 0) {
|
|
dev_err(dev->dev,
|
|
"%s: invalid message length\n", __func__);
|
|
dev->msg_err = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) {
|
|
/* new i2c_msg */
|
|
buf = msgs[dev->msg_write_idx].buf;
|
|
buf_len = msgs[dev->msg_write_idx].len;
|
|
|
|
/* If both IC_EMPTYFIFO_HOLD_MASTER_EN and
|
|
* IC_RESTART_EN are set, we must manually
|
|
* set restart bit between messages.
|
|
*/
|
|
if ((dev->master_cfg & DW_IC_CON_RESTART_EN) &&
|
|
(dev->msg_write_idx > 0))
|
|
need_restart = true;
|
|
}
|
|
|
|
tx_limit = dev->tx_fifo_depth - dw_readl(dev, DW_IC_TXFLR);
|
|
rx_limit = dev->rx_fifo_depth - dw_readl(dev, DW_IC_RXFLR);
|
|
|
|
while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
|
|
u32 cmd = 0;
|
|
|
|
/*
|
|
* If IC_EMPTYFIFO_HOLD_MASTER_EN is set we must
|
|
* manually set the stop bit. However, it cannot be
|
|
* detected from the registers so we set it always
|
|
* when writing/reading the last byte.
|
|
*/
|
|
|
|
/*
|
|
* i2c-core always sets the buffer length of
|
|
* I2C_FUNC_SMBUS_BLOCK_DATA to 1. The length will
|
|
* be adjusted when receiving the first byte.
|
|
* Thus we can't stop the transaction here.
|
|
*/
|
|
if (dev->msg_write_idx == dev->msgs_num - 1 &&
|
|
buf_len == 1 && !(flags & I2C_M_RECV_LEN))
|
|
cmd |= BIT(9);
|
|
|
|
if (need_restart) {
|
|
cmd |= BIT(10);
|
|
need_restart = false;
|
|
}
|
|
|
|
if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
|
|
|
|
/* Avoid rx buffer overrun */
|
|
if (dev->rx_outstanding >= dev->rx_fifo_depth)
|
|
break;
|
|
|
|
dw_writel(dev, cmd | 0x100, DW_IC_DATA_CMD);
|
|
rx_limit--;
|
|
dev->rx_outstanding++;
|
|
} else
|
|
dw_writel(dev, cmd | *buf++, DW_IC_DATA_CMD);
|
|
tx_limit--; buf_len--;
|
|
}
|
|
|
|
dev->tx_buf = buf;
|
|
dev->tx_buf_len = buf_len;
|
|
|
|
/*
|
|
* Because we don't know the buffer length in the
|
|
* I2C_FUNC_SMBUS_BLOCK_DATA case, we can't stop
|
|
* the transaction here.
|
|
*/
|
|
if (buf_len > 0 || flags & I2C_M_RECV_LEN) {
|
|
/* more bytes to be written */
|
|
dev->status |= STATUS_WRITE_IN_PROGRESS;
|
|
break;
|
|
} else
|
|
dev->status &= ~STATUS_WRITE_IN_PROGRESS;
|
|
}
|
|
|
|
/*
|
|
* If i2c_msg index search is completed, we don't need TX_EMPTY
|
|
* interrupt any more.
|
|
*/
|
|
if (dev->msg_write_idx == dev->msgs_num)
|
|
intr_mask &= ~DW_IC_INTR_TX_EMPTY;
|
|
|
|
if (dev->msg_err)
|
|
intr_mask = 0;
|
|
|
|
dw_writel(dev, intr_mask, DW_IC_INTR_MASK);
|
|
}
|
|
|
|
static u8
|
|
i2c_dw_recv_len(struct dw_i2c_dev *dev, u8 len)
|
|
{
|
|
struct i2c_msg *msgs = dev->msgs;
|
|
u32 flags = msgs[dev->msg_read_idx].flags;
|
|
|
|
/*
|
|
* Adjust the buffer length and mask the flag
|
|
* after receiving the first byte.
|
|
*/
|
|
len += (flags & I2C_CLIENT_PEC) ? 2 : 1;
|
|
dev->tx_buf_len = len - min_t(u8, len, dev->rx_outstanding);
|
|
msgs[dev->msg_read_idx].len = len;
|
|
msgs[dev->msg_read_idx].flags &= ~I2C_M_RECV_LEN;
|
|
|
|
return len;
|
|
}
|
|
|
|
static void
|
|
i2c_dw_read(struct dw_i2c_dev *dev)
|
|
{
|
|
struct i2c_msg *msgs = dev->msgs;
|
|
int rx_valid;
|
|
|
|
for (; dev->msg_read_idx < dev->msgs_num; dev->msg_read_idx++) {
|
|
u32 len;
|
|
u8 *buf;
|
|
|
|
if (!(msgs[dev->msg_read_idx].flags & I2C_M_RD))
|
|
continue;
|
|
|
|
if (!(dev->status & STATUS_READ_IN_PROGRESS)) {
|
|
len = msgs[dev->msg_read_idx].len;
|
|
buf = msgs[dev->msg_read_idx].buf;
|
|
} else {
|
|
len = dev->rx_buf_len;
|
|
buf = dev->rx_buf;
|
|
}
|
|
|
|
rx_valid = dw_readl(dev, DW_IC_RXFLR);
|
|
|
|
for (; len > 0 && rx_valid > 0; len--, rx_valid--) {
|
|
u32 flags = msgs[dev->msg_read_idx].flags;
|
|
|
|
*buf = dw_readl(dev, DW_IC_DATA_CMD);
|
|
/* Ensure length byte is a valid value */
|
|
if (flags & I2C_M_RECV_LEN &&
|
|
*buf <= I2C_SMBUS_BLOCK_MAX && *buf > 0) {
|
|
len = i2c_dw_recv_len(dev, *buf);
|
|
}
|
|
buf++;
|
|
dev->rx_outstanding--;
|
|
}
|
|
|
|
if (len > 0) {
|
|
dev->status |= STATUS_READ_IN_PROGRESS;
|
|
dev->rx_buf_len = len;
|
|
dev->rx_buf = buf;
|
|
return;
|
|
} else
|
|
dev->status &= ~STATUS_READ_IN_PROGRESS;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Prepare controller for a transaction and call i2c_dw_xfer_msg.
|
|
*/
|
|
static int
|
|
i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
|
|
{
|
|
struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
|
|
int ret;
|
|
|
|
dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num);
|
|
|
|
pm_runtime_get_sync(dev->dev);
|
|
|
|
reinit_completion(&dev->cmd_complete);
|
|
dev->msgs = msgs;
|
|
dev->msgs_num = num;
|
|
dev->cmd_err = 0;
|
|
dev->msg_write_idx = 0;
|
|
dev->msg_read_idx = 0;
|
|
dev->msg_err = 0;
|
|
dev->status = STATUS_IDLE;
|
|
dev->abort_source = 0;
|
|
dev->rx_outstanding = 0;
|
|
|
|
ret = i2c_dw_acquire_lock(dev);
|
|
if (ret)
|
|
goto done_nolock;
|
|
|
|
ret = i2c_dw_wait_bus_not_busy(dev);
|
|
if (ret < 0)
|
|
goto done;
|
|
|
|
/* Start the transfers */
|
|
i2c_dw_xfer_init(dev);
|
|
|
|
/* Wait for tx to complete */
|
|
if (!wait_for_completion_timeout(&dev->cmd_complete, adap->timeout)) {
|
|
dev_err(dev->dev, "controller timed out\n");
|
|
/* i2c_dw_init implicitly disables the adapter */
|
|
i2c_dw_init_master(dev);
|
|
ret = -ETIMEDOUT;
|
|
goto done;
|
|
}
|
|
|
|
/*
|
|
* We must disable the adapter before returning and signaling the end
|
|
* of the current transfer. Otherwise the hardware might continue
|
|
* generating interrupts which in turn causes a race condition with
|
|
* the following transfer. Needs some more investigation if the
|
|
* additional interrupts are a hardware bug or this driver doesn't
|
|
* handle them correctly yet.
|
|
*/
|
|
__i2c_dw_enable(dev, false);
|
|
|
|
if (dev->msg_err) {
|
|
ret = dev->msg_err;
|
|
goto done;
|
|
}
|
|
|
|
/* No error */
|
|
if (likely(!dev->cmd_err && !dev->status)) {
|
|
ret = num;
|
|
goto done;
|
|
}
|
|
|
|
/* We have an error */
|
|
if (dev->cmd_err == DW_IC_ERR_TX_ABRT) {
|
|
ret = i2c_dw_handle_tx_abort(dev);
|
|
goto done;
|
|
}
|
|
|
|
if (dev->status)
|
|
dev_err(dev->dev,
|
|
"transfer terminated early - interrupt latency too high?\n");
|
|
|
|
ret = -EIO;
|
|
|
|
done:
|
|
i2c_dw_release_lock(dev);
|
|
|
|
done_nolock:
|
|
pm_runtime_mark_last_busy(dev->dev);
|
|
pm_runtime_put_autosuspend(dev->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct i2c_algorithm i2c_dw_algo = {
|
|
.master_xfer = i2c_dw_xfer,
|
|
.functionality = i2c_dw_func,
|
|
};
|
|
|
|
static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
|
|
{
|
|
u32 stat;
|
|
|
|
/*
|
|
* The IC_INTR_STAT register just indicates "enabled" interrupts.
|
|
* Ths unmasked raw version of interrupt status bits are available
|
|
* in the IC_RAW_INTR_STAT register.
|
|
*
|
|
* That is,
|
|
* stat = dw_readl(IC_INTR_STAT);
|
|
* equals to,
|
|
* stat = dw_readl(IC_RAW_INTR_STAT) & dw_readl(IC_INTR_MASK);
|
|
*
|
|
* The raw version might be useful for debugging purposes.
|
|
*/
|
|
stat = dw_readl(dev, DW_IC_INTR_STAT);
|
|
|
|
/*
|
|
* Do not use the IC_CLR_INTR register to clear interrupts, or
|
|
* you'll miss some interrupts, triggered during the period from
|
|
* dw_readl(IC_INTR_STAT) to dw_readl(IC_CLR_INTR).
|
|
*
|
|
* Instead, use the separately-prepared IC_CLR_* registers.
|
|
*/
|
|
if (stat & DW_IC_INTR_RX_UNDER)
|
|
dw_readl(dev, DW_IC_CLR_RX_UNDER);
|
|
if (stat & DW_IC_INTR_RX_OVER)
|
|
dw_readl(dev, DW_IC_CLR_RX_OVER);
|
|
if (stat & DW_IC_INTR_TX_OVER)
|
|
dw_readl(dev, DW_IC_CLR_TX_OVER);
|
|
if (stat & DW_IC_INTR_RD_REQ)
|
|
dw_readl(dev, DW_IC_CLR_RD_REQ);
|
|
if (stat & DW_IC_INTR_TX_ABRT) {
|
|
/*
|
|
* The IC_TX_ABRT_SOURCE register is cleared whenever
|
|
* the IC_CLR_TX_ABRT is read. Preserve it beforehand.
|
|
*/
|
|
dev->abort_source = dw_readl(dev, DW_IC_TX_ABRT_SOURCE);
|
|
dw_readl(dev, DW_IC_CLR_TX_ABRT);
|
|
}
|
|
if (stat & DW_IC_INTR_RX_DONE)
|
|
dw_readl(dev, DW_IC_CLR_RX_DONE);
|
|
if (stat & DW_IC_INTR_ACTIVITY)
|
|
dw_readl(dev, DW_IC_CLR_ACTIVITY);
|
|
if (stat & DW_IC_INTR_STOP_DET)
|
|
dw_readl(dev, DW_IC_CLR_STOP_DET);
|
|
if (stat & DW_IC_INTR_START_DET)
|
|
dw_readl(dev, DW_IC_CLR_START_DET);
|
|
if (stat & DW_IC_INTR_GEN_CALL)
|
|
dw_readl(dev, DW_IC_CLR_GEN_CALL);
|
|
|
|
return stat;
|
|
}
|
|
|
|
/*
|
|
* Interrupt service routine. This gets called whenever an I2C master interrupt
|
|
* occurs.
|
|
*/
|
|
static int i2c_dw_irq_handler_master(struct dw_i2c_dev *dev)
|
|
{
|
|
u32 stat;
|
|
|
|
stat = i2c_dw_read_clear_intrbits(dev);
|
|
if (stat & DW_IC_INTR_TX_ABRT) {
|
|
dev->cmd_err |= DW_IC_ERR_TX_ABRT;
|
|
dev->status = STATUS_IDLE;
|
|
|
|
/*
|
|
* Anytime TX_ABRT is set, the contents of the tx/rx
|
|
* buffers are flushed. Make sure to skip them.
|
|
*/
|
|
dw_writel(dev, 0, DW_IC_INTR_MASK);
|
|
goto tx_aborted;
|
|
}
|
|
|
|
if (stat & DW_IC_INTR_RX_FULL)
|
|
i2c_dw_read(dev);
|
|
|
|
if (stat & DW_IC_INTR_TX_EMPTY)
|
|
i2c_dw_xfer_msg(dev);
|
|
|
|
/*
|
|
* No need to modify or disable the interrupt mask here.
|
|
* i2c_dw_xfer_msg() will take care of it according to
|
|
* the current transmit status.
|
|
*/
|
|
|
|
tx_aborted:
|
|
if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err)
|
|
complete(&dev->cmd_complete);
|
|
else if (unlikely(dev->flags & ACCESS_INTR_MASK)) {
|
|
/* Workaround to trigger pending interrupt */
|
|
stat = dw_readl(dev, DW_IC_INTR_MASK);
|
|
i2c_dw_disable_int(dev);
|
|
dw_writel(dev, stat, DW_IC_INTR_MASK);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
|
|
{
|
|
struct dw_i2c_dev *dev = dev_id;
|
|
u32 stat, enabled;
|
|
|
|
enabled = dw_readl(dev, DW_IC_ENABLE);
|
|
stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
|
|
dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat);
|
|
if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
|
|
return IRQ_NONE;
|
|
|
|
i2c_dw_irq_handler_master(dev);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
int i2c_dw_probe(struct dw_i2c_dev *dev)
|
|
{
|
|
struct i2c_adapter *adap = &dev->adapter;
|
|
unsigned long irq_flags;
|
|
int ret;
|
|
|
|
init_completion(&dev->cmd_complete);
|
|
|
|
dev->init = i2c_dw_init_master;
|
|
dev->disable = i2c_dw_disable;
|
|
dev->disable_int = i2c_dw_disable_int;
|
|
|
|
ret = dev->init(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
snprintf(adap->name, sizeof(adap->name),
|
|
"Synopsys DesignWare I2C adapter");
|
|
adap->retries = 3;
|
|
adap->algo = &i2c_dw_algo;
|
|
adap->dev.parent = dev->dev;
|
|
i2c_set_adapdata(adap, dev);
|
|
|
|
if (dev->pm_disabled) {
|
|
dev_pm_syscore_device(dev->dev, true);
|
|
irq_flags = IRQF_NO_SUSPEND;
|
|
} else {
|
|
irq_flags = IRQF_SHARED | IRQF_COND_SUSPEND;
|
|
}
|
|
|
|
i2c_dw_disable_int(dev);
|
|
ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags,
|
|
dev_name(dev->dev), dev);
|
|
if (ret) {
|
|
dev_err(dev->dev, "failure requesting irq %i: %d\n",
|
|
dev->irq, ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Increment PM usage count during adapter registration in order to
|
|
* avoid possible spurious runtime suspend when adapter device is
|
|
* registered to the device core and immediate resume in case bus has
|
|
* registered I2C slaves that do I2C transfers in their probe.
|
|
*/
|
|
pm_runtime_get_noresume(dev->dev);
|
|
ret = i2c_add_numbered_adapter(adap);
|
|
if (ret)
|
|
dev_err(dev->dev, "failure adding adapter: %d\n", ret);
|
|
pm_runtime_put_noidle(dev->dev);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(i2c_dw_probe);
|
|
|
|
MODULE_DESCRIPTION("Synopsys DesignWare I2C bus master adapter");
|
|
MODULE_LICENSE("GPL");
|