1210 lines
27 KiB
Plaintext
1210 lines
27 KiB
Plaintext
/*
|
|
* SAMSUNG Exynos5433 TM2 board device tree source
|
|
*
|
|
* Copyright (c) 2016 Samsung Electronics Co., Ltd.
|
|
*
|
|
* Common device tree source file for Samsung's TM2 and TM2E boards
|
|
* which are based on Samsung Exynos5433 SoC.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "exynos5433.dtsi"
|
|
#include <dt-bindings/clock/samsung,s2mps11.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
/ {
|
|
aliases {
|
|
gsc0 = &gsc_0;
|
|
gsc1 = &gsc_1;
|
|
gsc2 = &gsc_2;
|
|
pinctrl0 = &pinctrl_alive;
|
|
pinctrl1 = &pinctrl_aud;
|
|
pinctrl2 = &pinctrl_cpif;
|
|
pinctrl3 = &pinctrl_ese;
|
|
pinctrl4 = &pinctrl_finger;
|
|
pinctrl5 = &pinctrl_fsys;
|
|
pinctrl6 = &pinctrl_imem;
|
|
pinctrl7 = &pinctrl_nfc;
|
|
pinctrl8 = &pinctrl_peric;
|
|
pinctrl9 = &pinctrl_touch;
|
|
serial0 = &serial_0;
|
|
serial1 = &serial_1;
|
|
serial2 = &serial_2;
|
|
serial3 = &serial_3;
|
|
spi0 = &spi_0;
|
|
spi1 = &spi_1;
|
|
spi2 = &spi_2;
|
|
spi3 = &spi_3;
|
|
spi4 = &spi_4;
|
|
mshc0 = &mshc_0;
|
|
mshc2 = &mshc_2;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = &serial_1;
|
|
};
|
|
|
|
memory@20000000 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x20000000 0x0 0xc0000000>;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
power-key {
|
|
gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_POWER>;
|
|
label = "power key";
|
|
debounce-interval = <10>;
|
|
};
|
|
|
|
volume-up-key {
|
|
gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
label = "volume-up key";
|
|
debounce-interval = <10>;
|
|
};
|
|
|
|
volume-down-key {
|
|
gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
label = "volume-down key";
|
|
debounce-interval = <10>;
|
|
};
|
|
|
|
homepage-key {
|
|
gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_MENU>;
|
|
label = "homepage key";
|
|
debounce-interval = <10>;
|
|
};
|
|
};
|
|
|
|
i2c_max98504: i2c-gpio-0 {
|
|
compatible = "i2c-gpio";
|
|
gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
|
|
&gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
|
|
i2c-gpio,delay-us = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
|
|
max98504: max98504@31 {
|
|
compatible = "maxim,max98504";
|
|
reg = <0x31>;
|
|
maxim,rx-path = <1>;
|
|
maxim,tx-path = <1>;
|
|
maxim,tx-channel-mask = <3>;
|
|
maxim,tx-channel-source = <2>;
|
|
};
|
|
};
|
|
|
|
irda_regulator: irda-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>;
|
|
regulator-name = "irda_regulator";
|
|
};
|
|
|
|
sound {
|
|
compatible = "samsung,tm2-audio";
|
|
audio-codec = <&wm5110>;
|
|
i2s-controller = <&i2s0>;
|
|
audio-amplifier = <&max98504>;
|
|
mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
|
|
model = "wm5110";
|
|
samsung,audio-routing =
|
|
/* Headphone */
|
|
"HP", "HPOUT1L",
|
|
"HP", "HPOUT1R",
|
|
|
|
/* Speaker */
|
|
"SPK", "SPKOUT",
|
|
"SPKOUT", "HPOUT2L",
|
|
"SPKOUT", "HPOUT2R",
|
|
|
|
/* Receiver */
|
|
"RCV", "HPOUT3L",
|
|
"RCV", "HPOUT3R";
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&adc {
|
|
vdd-supply = <&ldo3_reg>;
|
|
status = "okay";
|
|
|
|
thermistor-ap {
|
|
compatible = "murata,ncp03wf104";
|
|
pullup-uv = <1800000>;
|
|
pullup-ohm = <100000>;
|
|
pulldown-ohm = <0>;
|
|
io-channels = <&adc 0>;
|
|
};
|
|
|
|
thermistor-battery {
|
|
compatible = "murata,ncp03wf104";
|
|
pullup-uv = <1800000>;
|
|
pullup-ohm = <100000>;
|
|
pulldown-ohm = <0>;
|
|
io-channels = <&adc 1>;
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
|
|
thermistor-charger {
|
|
compatible = "murata,ncp03wf104";
|
|
pullup-uv = <1800000>;
|
|
pullup-ohm = <100000>;
|
|
pulldown-ohm = <0>;
|
|
io-channels = <&adc 2>;
|
|
};
|
|
};
|
|
|
|
&bus_g2d_400 {
|
|
devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>;
|
|
vdd-supply = <&buck4_reg>;
|
|
exynos,saturation-ratio = <10>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_g2d_266 {
|
|
devfreq = <&bus_g2d_400>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_gscl {
|
|
devfreq = <&bus_g2d_400>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_hevc {
|
|
devfreq = <&bus_g2d_400>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_jpeg {
|
|
devfreq = <&bus_g2d_400>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_mfc {
|
|
devfreq = <&bus_g2d_400>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_mscl {
|
|
devfreq = <&bus_g2d_400>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_noc0 {
|
|
devfreq = <&bus_g2d_400>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_noc1 {
|
|
devfreq = <&bus_g2d_400>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_noc2 {
|
|
devfreq = <&bus_g2d_400>;
|
|
status = "okay";
|
|
};
|
|
|
|
&cmu_aud {
|
|
assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
|
|
assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
|
|
};
|
|
|
|
&cmu_fsys {
|
|
assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
|
|
<&cmu_top CLK_MOUT_SCLK_USBHOST30>,
|
|
<&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
|
|
<&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
|
|
<&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
|
|
<&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
|
|
<&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
|
|
<&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
|
|
<&cmu_top CLK_DIV_SCLK_USBDRD30>,
|
|
<&cmu_top CLK_DIV_SCLK_USBHOST30>;
|
|
assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
|
|
<&cmu_top CLK_MOUT_BUS_PLL_USER>,
|
|
<&cmu_top CLK_SCLK_USBDRD30_FSYS>,
|
|
<&cmu_top CLK_SCLK_USBHOST30_FSYS>,
|
|
<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
|
|
<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
|
|
<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
|
|
<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
|
|
assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
|
|
<66700000>, <66700000>;
|
|
};
|
|
|
|
&cmu_gscl {
|
|
assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
|
|
<&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
|
|
assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
|
|
<&cmu_top CLK_ACLK_GSCL_333>;
|
|
};
|
|
|
|
&cmu_mfc {
|
|
assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
|
|
assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
|
|
};
|
|
|
|
&cmu_mscl {
|
|
assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
|
|
<&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
|
|
<&cmu_mscl CLK_MOUT_SCLK_JPEG>,
|
|
<&cmu_top CLK_MOUT_SCLK_JPEG_A>;
|
|
assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
|
|
<&cmu_top CLK_SCLK_JPEG_MSCL>,
|
|
<&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
|
|
<&cmu_top CLK_MOUT_BUS_PLL_USER>;
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <&buck3_reg>;
|
|
};
|
|
|
|
&cpu4 {
|
|
cpu-supply = <&buck2_reg>;
|
|
};
|
|
|
|
&decon {
|
|
status = "okay";
|
|
};
|
|
|
|
&decon_tv {
|
|
status = "okay";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
tv_to_hdmi: endpoint {
|
|
remote-endpoint = <&hdmi_to_tv>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&dsi {
|
|
status = "okay";
|
|
vddcore-supply = <&ldo6_reg>;
|
|
vddio-supply = <&ldo7_reg>;
|
|
samsung,burst-clock-frequency = <512000000>;
|
|
samsung,esc-clock-frequency = <16000000>;
|
|
samsung,pll-clock-frequency = <24000000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&te_irq>;
|
|
};
|
|
|
|
&hdmi {
|
|
hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
vdd-supply = <&ldo6_reg>;
|
|
vdd_osc-supply = <&ldo7_reg>;
|
|
vdd_pll-supply = <&ldo6_reg>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
hdmi_to_tv: endpoint {
|
|
remote-endpoint = <&tv_to_hdmi>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
hdmi_to_mhl: endpoint {
|
|
remote-endpoint = <&mhl_to_hdmi>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&hsi2c_0 {
|
|
status = "okay";
|
|
clock-frequency = <2500000>;
|
|
|
|
s2mps13-pmic@66 {
|
|
compatible = "samsung,s2mps13-pmic";
|
|
interrupt-parent = <&gpa0>;
|
|
interrupts = <7 IRQ_TYPE_NONE>;
|
|
reg = <0x66>;
|
|
samsung,s2mps11-wrstbi-ground;
|
|
|
|
s2mps13_osc: clocks {
|
|
compatible = "samsung,s2mps13-clk";
|
|
#clock-cells = <1>;
|
|
clock-output-names = "s2mps13_ap", "s2mps13_cp",
|
|
"s2mps13_bt";
|
|
};
|
|
|
|
regulators {
|
|
ldo1_reg: LDO1 {
|
|
regulator-name = "VDD_ALIVE_0.9V_AP";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo2_reg: LDO2 {
|
|
regulator-name = "VDDQ_MMC2_2.8V_AP";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo3_reg: LDO3 {
|
|
regulator-name = "VDD1_E_1.8V_AP";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo4_reg: LDO4 {
|
|
regulator-name = "VDD10_MIF_PLL_1.0V_AP";
|
|
regulator-min-microvolt = <1300000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo5_reg: LDO5 {
|
|
regulator-name = "VDD10_DPLL_1.0V_AP";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo6_reg: LDO6 {
|
|
regulator-name = "VDD10_MIPI2L_1.0V_AP";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo7_reg: LDO7 {
|
|
regulator-name = "VDD18_MIPI2L_1.8V_AP";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo8_reg: LDO8 {
|
|
regulator-name = "VDD18_LLI_1.8V_AP";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo9_reg: LDO9 {
|
|
regulator-name = "VDD18_ABB_ETC_1.8V_AP";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo10_reg: LDO10 {
|
|
regulator-name = "VDD33_USB30_3.0V_AP";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo11_reg: LDO11 {
|
|
regulator-name = "VDD_INT_M_1.0V_AP";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo12_reg: LDO12 {
|
|
regulator-name = "VDD_KFC_M_1.1V_AP";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo13_reg: LDO13 {
|
|
regulator-name = "VDD_G3D_M_0.95V_AP";
|
|
regulator-min-microvolt = <950000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo14_reg: LDO14 {
|
|
regulator-name = "VDDQ_M1_LDO_1.2V_AP";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo15_reg: LDO15 {
|
|
regulator-name = "VDDQ_M2_LDO_1.2V_AP";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo16_reg: LDO16 {
|
|
regulator-name = "VDDQ_EFUSE";
|
|
regulator-min-microvolt = <1400000>;
|
|
regulator-max-microvolt = <3400000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo17_reg: LDO17 {
|
|
regulator-name = "V_TFLASH_2.8V_AP";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
ldo18_reg: LDO18 {
|
|
regulator-name = "V_CODEC_1.8V_AP";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo19_reg: LDO19 {
|
|
regulator-name = "VDDA_1.8V_COMP";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo20_reg: LDO20 {
|
|
regulator-name = "VCC_2.8V_AP";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo21_reg: LDO21 {
|
|
regulator-name = "VT_CAM_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo22_reg: LDO22 {
|
|
regulator-name = "CAM_IO_1.8V_AP";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo23_reg: LDO23 {
|
|
regulator-name = "CAM_SEN_CORE_1.05V_AP";
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
};
|
|
|
|
ldo24_reg: LDO24 {
|
|
regulator-name = "VT_CAM_1.2V";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
ldo25_reg: LDO25 {
|
|
regulator-name = "UNUSED_LDO25";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
ldo26_reg: LDO26 {
|
|
regulator-name = "CAM_AF_2.8V_AP";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
ldo27_reg: LDO27 {
|
|
regulator-name = "VCC_3.0V_LCD_AP";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
ldo28_reg: LDO28 {
|
|
regulator-name = "VCC_1.8V_LCD_AP";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo29_reg: LDO29 {
|
|
regulator-name = "VT_CAM_2.8V";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
ldo30_reg: LDO30 {
|
|
regulator-name = "TSP_AVDD_3.3V_AP";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
ldo31_reg: LDO31 {
|
|
/*
|
|
* LDO31 differs from target to target,
|
|
* its definition is in the .dts
|
|
*/
|
|
};
|
|
|
|
ldo32_reg: LDO32 {
|
|
regulator-name = "VTOUCH_1.8V_AP";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo33_reg: LDO33 {
|
|
regulator-name = "VTOUCH_LED_3.3V";
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-ramp-delay = <12500>;
|
|
};
|
|
|
|
ldo34_reg: LDO34 {
|
|
regulator-name = "VCC_1.8V_MHL_AP";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <2100000>;
|
|
};
|
|
|
|
ldo35_reg: LDO35 {
|
|
regulator-name = "OIS_VM_2.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
ldo36_reg: LDO36 {
|
|
regulator-name = "VSIL_1.0V";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
};
|
|
|
|
ldo37_reg: LDO37 {
|
|
regulator-name = "VF_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo38_reg: LDO38 {
|
|
/*
|
|
* LDO38 differs from target to target,
|
|
* its definition is in the .dts
|
|
*/
|
|
};
|
|
|
|
ldo39_reg: LDO39 {
|
|
regulator-name = "V_HRM_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo40_reg: LDO40 {
|
|
regulator-name = "V_HRM_3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
buck1_reg: BUCK1 {
|
|
regulator-name = "VDD_MIF_0.9V_AP";
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck2_reg: BUCK2 {
|
|
regulator-name = "VDD_EGL_1.0V_AP";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck3_reg: BUCK3 {
|
|
regulator-name = "VDD_KFC_1.0V_AP";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck4_reg: BUCK4 {
|
|
regulator-name = "VDD_INT_0.95V_AP";
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck5_reg: BUCK5 {
|
|
regulator-name = "VDD_DISP_CAM0_0.9V_AP";
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck6_reg: BUCK6 {
|
|
regulator-name = "VDD_G3D_0.9V_AP";
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck7_reg: BUCK7 {
|
|
regulator-name = "VDD_MEM1_1.2V_AP";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck8_reg: BUCK8 {
|
|
regulator-name = "VDD_LLDO_1.35V_AP";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck9_reg: BUCK9 {
|
|
regulator-name = "VDD_MLDO_2.0V_AP";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck10_reg: BUCK10 {
|
|
regulator-name = "vdd_mem2";
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&hsi2c_5 {
|
|
status = "okay";
|
|
|
|
stmfts: touchscreen@49 {
|
|
compatible = "st,stmfts";
|
|
reg = <0x49>;
|
|
interrupt-parent = <&gpa1>;
|
|
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
|
|
avdd-supply = <&ldo30_reg>;
|
|
vdd-supply = <&ldo31_reg>;
|
|
};
|
|
};
|
|
|
|
&hsi2c_7 {
|
|
status = "okay";
|
|
|
|
sii8620@39 {
|
|
reg = <0x39>;
|
|
compatible = "sil,sii8620";
|
|
cvcc10-supply = <&ldo36_reg>;
|
|
iovcc18-supply = <&ldo34_reg>;
|
|
interrupt-parent = <&gpf0>;
|
|
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
|
|
reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
|
|
clocks = <&pmu_system_controller 0>;
|
|
clock-names = "xtal";
|
|
|
|
port {
|
|
mhl_to_hdmi: endpoint {
|
|
remote-endpoint = <&hdmi_to_mhl>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&hsi2c_8 {
|
|
status = "okay";
|
|
|
|
max77843@66 {
|
|
compatible = "maxim,max77843";
|
|
interrupt-parent = <&gpa1>;
|
|
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
|
|
reg = <0x66>;
|
|
|
|
muic: max77843-muic {
|
|
compatible = "maxim,max77843-muic";
|
|
};
|
|
|
|
regulators {
|
|
compatible = "maxim,max77843-regulator";
|
|
safeout1_reg: SAFEOUT1 {
|
|
regulator-name = "SAFEOUT1";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <4950000>;
|
|
};
|
|
|
|
safeout2_reg: SAFEOUT2 {
|
|
regulator-name = "SAFEOUT2";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <4950000>;
|
|
};
|
|
|
|
charger_reg: CHARGER {
|
|
regulator-name = "CHARGER";
|
|
regulator-min-microamp = <100000>;
|
|
regulator-max-microamp = <3150000>;
|
|
};
|
|
};
|
|
|
|
haptic: max77843-haptic {
|
|
compatible = "maxim,max77843-haptic";
|
|
haptic-supply = <&ldo38_reg>;
|
|
pwms = <&pwm 0 33670 0>;
|
|
pwm-names = "haptic";
|
|
};
|
|
};
|
|
};
|
|
|
|
&hsi2c_11 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2s0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mshc_0 {
|
|
status = "okay";
|
|
mmc-hs200-1_8v;
|
|
mmc-hs400-1_8v;
|
|
cap-mmc-highspeed;
|
|
non-removable;
|
|
card-detect-delay = <200>;
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-sdr-timing = <0 4>;
|
|
samsung,dw-mshc-ddr-timing = <0 2>;
|
|
samsung,dw-mshc-hs400-timing = <0 3>;
|
|
samsung,read-strobe-delay = <90>;
|
|
fifo-depth = <0x80>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
|
|
&sd0_bus8 &sd0_rdqs>;
|
|
bus-width = <8>;
|
|
assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
|
|
assigned-clock-rates = <800000000>;
|
|
};
|
|
|
|
&mshc_2 {
|
|
status = "okay";
|
|
cap-sd-highspeed;
|
|
disable-wp;
|
|
cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
|
|
cd-inverted;
|
|
card-detect-delay = <200>;
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-sdr-timing = <0 4>;
|
|
samsung,dw-mshc-ddr-timing = <0 2>;
|
|
fifo-depth = <0x80>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
|
|
bus-width = <4>;
|
|
};
|
|
|
|
&ppmu_d0_general {
|
|
status = "okay";
|
|
events {
|
|
ppmu_event0_d0_general: ppmu-event0-d0-general {
|
|
event-name = "ppmu-event0-d0-general";
|
|
};
|
|
};
|
|
};
|
|
|
|
&ppmu_d1_general {
|
|
status = "okay";
|
|
events {
|
|
ppmu_event0_d1_general: ppmu-event0-d1-general {
|
|
event-name = "ppmu-event0-d1-general";
|
|
};
|
|
};
|
|
};
|
|
|
|
&pinctrl_alive {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&initial_alive>;
|
|
|
|
initial_alive: initial-state {
|
|
PIN(INPUT, gpa0-0, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpa0-1, NONE, FAST_SR1);
|
|
PIN(INPUT, gpa0-2, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpa0-3, NONE, FAST_SR1);
|
|
PIN(INPUT, gpa0-4, NONE, FAST_SR1);
|
|
PIN(INPUT, gpa0-5, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpa0-6, NONE, FAST_SR1);
|
|
PIN(INPUT, gpa0-7, NONE, FAST_SR1);
|
|
|
|
PIN(INPUT, gpa1-0, UP, FAST_SR1);
|
|
PIN(INPUT, gpa1-1, UP, FAST_SR1);
|
|
PIN(INPUT, gpa1-2, NONE, FAST_SR1);
|
|
PIN(INPUT, gpa1-3, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpa1-4, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpa1-5, NONE, FAST_SR1);
|
|
PIN(INPUT, gpa1-6, NONE, FAST_SR1);
|
|
PIN(INPUT, gpa1-7, NONE, FAST_SR1);
|
|
|
|
PIN(INPUT, gpa2-0, NONE, FAST_SR1);
|
|
PIN(INPUT, gpa2-1, NONE, FAST_SR1);
|
|
PIN(INPUT, gpa2-2, NONE, FAST_SR1);
|
|
PIN(INPUT, gpa2-3, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpa2-4, NONE, FAST_SR1);
|
|
PIN(INPUT, gpa2-5, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpa2-6, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpa2-7, NONE, FAST_SR1);
|
|
|
|
PIN(INPUT, gpa3-0, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpa3-1, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpa3-2, NONE, FAST_SR1);
|
|
PIN(INPUT, gpa3-3, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpa3-4, NONE, FAST_SR1);
|
|
PIN(INPUT, gpa3-5, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpa3-6, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpa3-7, DOWN, FAST_SR1);
|
|
|
|
PIN(INPUT, gpf1-0, NONE, FAST_SR1);
|
|
PIN(INPUT, gpf1-1, NONE, FAST_SR1);
|
|
PIN(INPUT, gpf1-2, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpf1-4, UP, FAST_SR1);
|
|
PIN(OUTPUT, gpf1-5, NONE, FAST_SR1);
|
|
PIN(INPUT, gpf1-6, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpf1-7, DOWN, FAST_SR1);
|
|
|
|
PIN(INPUT, gpf2-0, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpf2-1, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpf2-2, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpf2-3, DOWN, FAST_SR1);
|
|
|
|
PIN(INPUT, gpf3-0, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpf3-1, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpf3-2, NONE, FAST_SR1);
|
|
PIN(INPUT, gpf3-3, DOWN, FAST_SR1);
|
|
|
|
PIN(INPUT, gpf4-0, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpf4-1, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpf4-2, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpf4-3, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpf4-4, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpf4-5, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpf4-6, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpf4-7, DOWN, FAST_SR1);
|
|
|
|
PIN(INPUT, gpf5-0, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpf5-1, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpf5-2, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpf5-3, DOWN, FAST_SR1);
|
|
PIN(OUTPUT, gpf5-4, NONE, FAST_SR1);
|
|
PIN(INPUT, gpf5-5, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpf5-6, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpf5-7, DOWN, FAST_SR1);
|
|
};
|
|
|
|
te_irq: te_irq {
|
|
samsung,pins = "gpf1-3";
|
|
samsung,pin-function = <0xf>;
|
|
};
|
|
};
|
|
|
|
&pinctrl_cpif {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&initial_cpif>;
|
|
|
|
initial_cpif: initial-state {
|
|
PIN(INPUT, gpv6-0, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpv6-1, DOWN, FAST_SR1);
|
|
};
|
|
};
|
|
|
|
&pinctrl_ese {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&initial_ese>;
|
|
|
|
initial_ese: initial-state {
|
|
PIN(INPUT, gpj2-0, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpj2-1, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpj2-2, DOWN, FAST_SR1);
|
|
};
|
|
};
|
|
|
|
&pinctrl_fsys {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&initial_fsys>;
|
|
|
|
initial_fsys: initial-state {
|
|
PIN(INPUT, gpr3-0, NONE, FAST_SR1);
|
|
PIN(INPUT, gpr3-1, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpr3-2, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpr3-3, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpr3-7, NONE, FAST_SR1);
|
|
};
|
|
};
|
|
|
|
&pinctrl_imem {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&initial_imem>;
|
|
|
|
initial_imem: initial-state {
|
|
PIN(INPUT, gpf0-0, UP, FAST_SR1);
|
|
PIN(INPUT, gpf0-1, UP, FAST_SR1);
|
|
PIN(INPUT, gpf0-2, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpf0-3, UP, FAST_SR1);
|
|
PIN(INPUT, gpf0-4, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpf0-5, NONE, FAST_SR1);
|
|
PIN(INPUT, gpf0-6, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpf0-7, UP, FAST_SR1);
|
|
};
|
|
};
|
|
|
|
&pinctrl_nfc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&initial_nfc>;
|
|
|
|
initial_nfc: initial-state {
|
|
PIN(INPUT, gpj0-2, DOWN, FAST_SR1);
|
|
};
|
|
};
|
|
|
|
&pinctrl_peric {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&initial_peric>;
|
|
|
|
initial_peric: initial-state {
|
|
PIN(INPUT, gpv7-0, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpv7-1, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpv7-2, NONE, FAST_SR1);
|
|
PIN(INPUT, gpv7-3, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpv7-4, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpv7-5, DOWN, FAST_SR1);
|
|
|
|
PIN(INPUT, gpb0-4, DOWN, FAST_SR1);
|
|
|
|
PIN(INPUT, gpc0-2, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpc0-5, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpc0-7, DOWN, FAST_SR1);
|
|
|
|
PIN(INPUT, gpc1-1, DOWN, FAST_SR1);
|
|
|
|
PIN(INPUT, gpc3-4, NONE, FAST_SR1);
|
|
PIN(INPUT, gpc3-5, NONE, FAST_SR1);
|
|
PIN(INPUT, gpc3-6, NONE, FAST_SR1);
|
|
PIN(INPUT, gpc3-7, NONE, FAST_SR1);
|
|
|
|
PIN(OUTPUT, gpg0-0, NONE, FAST_SR1);
|
|
PIN(2, gpg0-1, DOWN, FAST_SR1);
|
|
|
|
PIN(INPUT, gpd2-5, DOWN, FAST_SR1);
|
|
|
|
PIN(INPUT, gpd4-0, NONE, FAST_SR1);
|
|
PIN(INPUT, gpd4-1, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpd4-2, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpd4-3, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpd4-4, DOWN, FAST_SR1);
|
|
|
|
PIN(INPUT, gpd6-3, DOWN, FAST_SR1);
|
|
|
|
PIN(INPUT, gpd8-1, UP, FAST_SR1);
|
|
|
|
PIN(INPUT, gpg1-0, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpg1-1, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpg1-2, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpg1-3, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpg1-4, DOWN, FAST_SR1);
|
|
|
|
PIN(INPUT, gpg2-0, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpg2-1, DOWN, FAST_SR1);
|
|
|
|
PIN(INPUT, gpg3-0, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpg3-1, DOWN, FAST_SR1);
|
|
PIN(INPUT, gpg3-5, DOWN, FAST_SR1);
|
|
};
|
|
};
|
|
|
|
&pinctrl_touch {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&initial_touch>;
|
|
|
|
initial_touch: initial-state {
|
|
PIN(INPUT, gpj1-2, DOWN, FAST_SR1);
|
|
};
|
|
};
|
|
|
|
&pwm {
|
|
pinctrl-0 = <&pwm0_out>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&mic {
|
|
status = "okay";
|
|
};
|
|
|
|
&pmu_system_controller {
|
|
assigned-clocks = <&pmu_system_controller 0>;
|
|
assigned-clock-parents = <&xxti>;
|
|
};
|
|
|
|
&serial_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&spi_1 {
|
|
cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
|
|
wm5110: wm5110-codec@0 {
|
|
compatible = "wlf,wm5110";
|
|
reg = <0x0>;
|
|
spi-max-frequency = <20000000>;
|
|
interrupt-parent = <&gpa0>;
|
|
interrupts = <4 IRQ_TYPE_NONE>;
|
|
clocks = <&pmu_system_controller 0>,
|
|
<&s2mps13_osc S2MPS11_CLK_BT>;
|
|
clock-names = "mclk1", "mclk2";
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
wlf,micd-detect-debounce = <300>;
|
|
wlf,micd-bias-start-time = <0x1>;
|
|
wlf,micd-rate = <0x7>;
|
|
wlf,micd-dbtime = <0x1>;
|
|
wlf,micd-force-micbias;
|
|
wlf,micd-configs = <0x0 1 0>;
|
|
wlf,hpdet-channel = <1>;
|
|
wlf,gpsw = <0x1>;
|
|
wlf,inmode = <2 0 2 0>;
|
|
|
|
wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
|
|
wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
|
|
|
|
/* core supplies */
|
|
AVDD-supply = <&ldo18_reg>;
|
|
DBVDD1-supply = <&ldo18_reg>;
|
|
CPVDD-supply = <&ldo18_reg>;
|
|
DBVDD2-supply = <&ldo18_reg>;
|
|
DBVDD3-supply = <&ldo18_reg>;
|
|
|
|
controller-data {
|
|
samsung,spi-feedback-delay = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&spi_3 {
|
|
status = "okay";
|
|
no-cs-readback;
|
|
|
|
irled@0 {
|
|
compatible = "ir-spi-led";
|
|
reg = <0x0>;
|
|
spi-max-frequency = <5000000>;
|
|
power-supply = <&irda_regulator>;
|
|
duty-cycle = <60>;
|
|
led-active-low;
|
|
|
|
controller-data {
|
|
samsung,spi-feedback-delay = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&timer {
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
&tmu_atlas0 {
|
|
vtmu-supply = <&ldo3_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&tmu_apollo {
|
|
vtmu-supply = <&ldo3_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&tmu_g3d {
|
|
vtmu-supply = <&ldo3_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd30 {
|
|
vdd33-supply = <&ldo10_reg>;
|
|
vdd10-supply = <&ldo6_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd_dwc3 {
|
|
dr_mode = "otg";
|
|
extcon = <&muic>;
|
|
};
|
|
|
|
&usbdrd30_phy {
|
|
vbus-supply = <&safeout1_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&xxti {
|
|
clock-frequency = <24000000>;
|
|
};
|