666 lines
23 KiB
ReStructuredText
666 lines
23 KiB
ReStructuredText
.. -*- coding: utf-8; mode: rst -*-
|
|
|
|
.. _sliced:
|
|
|
|
*************************
|
|
Sliced VBI Data Interface
|
|
*************************
|
|
|
|
VBI stands for Vertical Blanking Interval, a gap in the sequence of
|
|
lines of an analog video signal. During VBI no picture information is
|
|
transmitted, allowing some time while the electron beam of a cathode ray
|
|
tube TV returns to the top of the screen.
|
|
|
|
Sliced VBI devices use hardware to demodulate data transmitted in the
|
|
VBI. V4L2 drivers shall *not* do this by software, see also the
|
|
:ref:`raw VBI interface <raw-vbi>`. The data is passed as short
|
|
packets of fixed size, covering one scan line each. The number of
|
|
packets per video frame is variable.
|
|
|
|
Sliced VBI capture and output devices are accessed through the same
|
|
character special files as raw VBI devices. When a driver supports both
|
|
interfaces, the default function of a ``/dev/vbi`` device is *raw* VBI
|
|
capturing or output, and the sliced VBI function is only available after
|
|
calling the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl as defined
|
|
below. Likewise a ``/dev/video`` device may support the sliced VBI API,
|
|
however the default function here is video capturing or output.
|
|
Different file descriptors must be used to pass raw and sliced VBI data
|
|
simultaneously, if this is supported by the driver.
|
|
|
|
|
|
Querying Capabilities
|
|
=====================
|
|
|
|
Devices supporting the sliced VBI capturing or output API set the
|
|
``V4L2_CAP_SLICED_VBI_CAPTURE`` or ``V4L2_CAP_SLICED_VBI_OUTPUT`` flag
|
|
respectively, in the ``capabilities`` field of struct
|
|
:c:type:`v4l2_capability` returned by the
|
|
:ref:`VIDIOC_QUERYCAP` ioctl. At least one of the
|
|
read/write, streaming or asynchronous :ref:`I/O methods <io>` must be
|
|
supported. Sliced VBI devices may have a tuner or modulator.
|
|
|
|
|
|
Supplemental Functions
|
|
======================
|
|
|
|
Sliced VBI devices shall support :ref:`video input or output <video>`
|
|
and :ref:`tuner or modulator <tuner>` ioctls if they have these
|
|
capabilities, and they may support :ref:`control` ioctls.
|
|
The :ref:`video standard <standard>` ioctls provide information vital
|
|
to program a sliced VBI device, therefore must be supported.
|
|
|
|
|
|
.. _sliced-vbi-format-negotitation:
|
|
|
|
Sliced VBI Format Negotiation
|
|
=============================
|
|
|
|
To find out which data services are supported by the hardware
|
|
applications can call the
|
|
:ref:`VIDIOC_G_SLICED_VBI_CAP <VIDIOC_G_SLICED_VBI_CAP>` ioctl.
|
|
All drivers implementing the sliced VBI interface must support this
|
|
ioctl. The results may differ from those of the
|
|
:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl when the number of VBI
|
|
lines the hardware can capture or output per frame, or the number of
|
|
services it can identify on a given line are limited. For example on PAL
|
|
line 16 the hardware may be able to look for a VPS or Teletext signal,
|
|
but not both at the same time.
|
|
|
|
To determine the currently selected services applications set the
|
|
``type`` field of struct :c:type:`v4l2_format` to
|
|
``V4L2_BUF_TYPE_SLICED_VBI_CAPTURE`` or
|
|
``V4L2_BUF_TYPE_SLICED_VBI_OUTPUT``, and the
|
|
:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` ioctl fills the ``fmt.sliced``
|
|
member, a struct
|
|
:c:type:`v4l2_sliced_vbi_format`.
|
|
|
|
Applications can request different parameters by initializing or
|
|
modifying the ``fmt.sliced`` member and calling the
|
|
:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl with a pointer to the
|
|
struct :c:type:`v4l2_format` structure.
|
|
|
|
The sliced VBI API is more complicated than the raw VBI API because the
|
|
hardware must be told which VBI service to expect on each scan line. Not
|
|
all services may be supported by the hardware on all lines (this is
|
|
especially true for VBI output where Teletext is often unsupported and
|
|
other services can only be inserted in one specific line). In many
|
|
cases, however, it is sufficient to just set the ``service_set`` field
|
|
to the required services and let the driver fill the ``service_lines``
|
|
array according to hardware capabilities. Only if more precise control
|
|
is needed should the programmer set the ``service_lines`` array
|
|
explicitly.
|
|
|
|
The :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl modifies the parameters
|
|
according to hardware capabilities. When the driver allocates resources
|
|
at this point, it may return an ``EBUSY`` error code if the required
|
|
resources are temporarily unavailable. Other resource allocation points
|
|
which may return ``EBUSY`` can be the
|
|
:ref:`VIDIOC_STREAMON` ioctl and the first
|
|
:ref:`read() <func-read>`, :ref:`write() <func-write>` and
|
|
:ref:`select() <func-select>` call.
|
|
|
|
|
|
.. c:type:: v4l2_sliced_vbi_format
|
|
|
|
struct v4l2_sliced_vbi_format
|
|
-----------------------------
|
|
|
|
.. raw:: latex
|
|
|
|
\begingroup
|
|
\scriptsize
|
|
\setlength{\tabcolsep}{2pt}
|
|
|
|
.. tabularcolumns:: |p{.75cm}|p{3.3cm}|p{3.4cm}|p{3.4cm}|p{3.4cm}|
|
|
|
|
.. cssclass:: longtable
|
|
|
|
.. flat-table::
|
|
:header-rows: 0
|
|
:stub-columns: 0
|
|
:widths: 3 3 2 2 2
|
|
|
|
* - __u32
|
|
- ``service_set``
|
|
- :cspan:`2`
|
|
|
|
If ``service_set`` is non-zero when passed with
|
|
:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` or
|
|
:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>`, the ``service_lines``
|
|
array will be filled by the driver according to the services
|
|
specified in this field. For example, if ``service_set`` is
|
|
initialized with ``V4L2_SLICED_TELETEXT_B | V4L2_SLICED_WSS_625``,
|
|
a driver for the cx25840 video decoder sets lines 7-22 of both
|
|
fields [#f1]_ to ``V4L2_SLICED_TELETEXT_B`` and line 23 of the first
|
|
field to ``V4L2_SLICED_WSS_625``. If ``service_set`` is set to
|
|
zero, then the values of ``service_lines`` will be used instead.
|
|
|
|
On return the driver sets this field to the union of all elements
|
|
of the returned ``service_lines`` array. It may contain less
|
|
services than requested, perhaps just one, if the hardware cannot
|
|
handle more services simultaneously. It may be empty (zero) if
|
|
none of the requested services are supported by the hardware.
|
|
* - __u16
|
|
- ``service_lines``\ [2][24]
|
|
- :cspan:`2`
|
|
|
|
Applications initialize this array with sets of data services the
|
|
driver shall look for or insert on the respective scan line.
|
|
Subject to hardware capabilities drivers return the requested set,
|
|
a subset, which may be just a single service, or an empty set.
|
|
When the hardware cannot handle multiple services on the same line
|
|
the driver shall choose one. No assumptions can be made on which
|
|
service the driver chooses.
|
|
|
|
Data services are defined in :ref:`vbi-services2`. Array indices
|
|
map to ITU-R line numbers\ [#f2]_ as follows:
|
|
* -
|
|
-
|
|
- Element
|
|
- 525 line systems
|
|
- 625 line systems
|
|
* -
|
|
-
|
|
- ``service_lines``\ [0][1]
|
|
- 1
|
|
- 1
|
|
* -
|
|
-
|
|
- ``service_lines``\ [0][23]
|
|
- 23
|
|
- 23
|
|
* -
|
|
-
|
|
- ``service_lines``\ [1][1]
|
|
- 264
|
|
- 314
|
|
* -
|
|
-
|
|
- ``service_lines``\ [1][23]
|
|
- 286
|
|
- 336
|
|
* -
|
|
-
|
|
- :cspan:`2` Drivers must set ``service_lines`` [0][0] and
|
|
``service_lines``\ [1][0] to zero. The
|
|
``V4L2_VBI_ITU_525_F1_START``, ``V4L2_VBI_ITU_525_F2_START``,
|
|
``V4L2_VBI_ITU_625_F1_START`` and ``V4L2_VBI_ITU_625_F2_START``
|
|
defines give the start line numbers for each field for each 525 or
|
|
625 line format as a convenience. Don't forget that ITU line
|
|
numbering starts at 1, not 0.
|
|
* - __u32
|
|
- ``io_size``
|
|
- :cspan:`2` Maximum number of bytes passed by one
|
|
:ref:`read() <func-read>` or :ref:`write() <func-write>` call,
|
|
and the buffer size in bytes for the
|
|
:ref:`VIDIOC_QBUF` and
|
|
:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. Drivers set this field
|
|
to the size of struct
|
|
:c:type:`v4l2_sliced_vbi_data` times the
|
|
number of non-zero elements in the returned ``service_lines``
|
|
array (that is the number of lines potentially carrying data).
|
|
* - __u32
|
|
- ``reserved``\ [2]
|
|
- :cspan:`2` This array is reserved for future extensions.
|
|
|
|
Applications and drivers must set it to zero.
|
|
|
|
.. raw:: latex
|
|
|
|
\endgroup
|
|
|
|
.. _vbi-services2:
|
|
|
|
Sliced VBI services
|
|
-------------------
|
|
|
|
.. raw:: latex
|
|
|
|
\footnotesize
|
|
|
|
.. tabularcolumns:: |p{4.1cm}|p{1.1cm}|p{2.4cm}|p{2.0cm}|p{7.3cm}|
|
|
|
|
.. flat-table::
|
|
:header-rows: 1
|
|
:stub-columns: 0
|
|
:widths: 2 1 1 2 2
|
|
|
|
* - Symbol
|
|
- Value
|
|
- Reference
|
|
- Lines, usually
|
|
- Payload
|
|
* - ``V4L2_SLICED_TELETEXT_B`` (Teletext System B)
|
|
- 0x0001
|
|
- :ref:`ets300706`,
|
|
|
|
:ref:`itu653`
|
|
- PAL/SECAM line 7-22, 320-335 (second field 7-22)
|
|
- Last 42 of the 45 byte Teletext packet, that is without clock
|
|
run-in and framing code, lsb first transmitted.
|
|
* - ``V4L2_SLICED_VPS``
|
|
- 0x0400
|
|
- :ref:`ets300231`
|
|
- PAL line 16
|
|
- Byte number 3 to 15 according to Figure 9 of ETS 300 231, lsb
|
|
first transmitted.
|
|
* - ``V4L2_SLICED_CAPTION_525``
|
|
- 0x1000
|
|
- :ref:`cea608`
|
|
- NTSC line 21, 284 (second field 21)
|
|
- Two bytes in transmission order, including parity bit, lsb first
|
|
transmitted.
|
|
* - ``V4L2_SLICED_WSS_625``
|
|
- 0x4000
|
|
- :ref:`itu1119`,
|
|
|
|
:ref:`en300294`
|
|
- PAL/SECAM line 23
|
|
-
|
|
|
|
::
|
|
|
|
Byte 0 1
|
|
msb lsb msb lsb
|
|
Bit 7 6 5 4 3 2 1 0 x x 13 12 11 10 9
|
|
* - ``V4L2_SLICED_VBI_525``
|
|
- 0x1000
|
|
- :cspan:`2` Set of services applicable to 525 line systems.
|
|
* - ``V4L2_SLICED_VBI_625``
|
|
- 0x4401
|
|
- :cspan:`2` Set of services applicable to 625 line systems.
|
|
|
|
.. raw:: latex
|
|
|
|
\normalsize
|
|
|
|
|
|
Drivers may return an ``EINVAL`` error code when applications attempt to
|
|
read or write data without prior format negotiation, after switching the
|
|
video standard (which may invalidate the negotiated VBI parameters) and
|
|
after switching the video input (which may change the video standard as
|
|
a side effect). The :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl may
|
|
return an ``EBUSY`` error code when applications attempt to change the
|
|
format while i/o is in progress (between a
|
|
:ref:`VIDIOC_STREAMON` and
|
|
:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` call, and after the first
|
|
:ref:`read() <func-read>` or :ref:`write() <func-write>` call).
|
|
|
|
|
|
Reading and writing sliced VBI data
|
|
===================================
|
|
|
|
A single :ref:`read() <func-read>` or :ref:`write() <func-write>`
|
|
call must pass all data belonging to one video frame. That is an array
|
|
of struct :c:type:`v4l2_sliced_vbi_data` structures with one or
|
|
more elements and a total size not exceeding ``io_size`` bytes. Likewise
|
|
in streaming I/O mode one buffer of ``io_size`` bytes must contain data
|
|
of one video frame. The ``id`` of unused
|
|
struct :c:type:`v4l2_sliced_vbi_data` elements must be zero.
|
|
|
|
|
|
.. c:type:: v4l2_sliced_vbi_data
|
|
|
|
struct v4l2_sliced_vbi_data
|
|
---------------------------
|
|
|
|
.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
|
|
|
|
.. flat-table::
|
|
:header-rows: 0
|
|
:stub-columns: 0
|
|
:widths: 3 1 4
|
|
|
|
* - __u32
|
|
- ``id``
|
|
- A flag from :ref:`vbi-services` identifying the type of data in
|
|
this packet. Only a single bit must be set. When the ``id`` of a
|
|
captured packet is zero, the packet is empty and the contents of
|
|
other fields are undefined. Applications shall ignore empty
|
|
packets. When the ``id`` of a packet for output is zero the
|
|
contents of the ``data`` field are undefined and the driver must
|
|
no longer insert data on the requested ``field`` and ``line``.
|
|
* - __u32
|
|
- ``field``
|
|
- The video field number this data has been captured from, or shall
|
|
be inserted at. ``0`` for the first field, ``1`` for the second
|
|
field.
|
|
* - __u32
|
|
- ``line``
|
|
- The field (as opposed to frame) line number this data has been
|
|
captured from, or shall be inserted at. See :ref:`vbi-525` and
|
|
:ref:`vbi-625` for valid values. Sliced VBI capture devices can
|
|
set the line number of all packets to ``0`` if the hardware cannot
|
|
reliably identify scan lines. The field number must always be
|
|
valid.
|
|
* - __u32
|
|
- ``reserved``
|
|
- This field is reserved for future extensions. Applications and
|
|
drivers must set it to zero.
|
|
* - __u8
|
|
- ``data``\ [48]
|
|
- The packet payload. See :ref:`vbi-services` for the contents and
|
|
number of bytes passed for each data type. The contents of padding
|
|
bytes at the end of this array are undefined, drivers and
|
|
applications shall ignore them.
|
|
|
|
|
|
Packets are always passed in ascending line number order, without
|
|
duplicate line numbers. The :ref:`write() <func-write>` function and
|
|
the :ref:`VIDIOC_QBUF` ioctl must return an ``EINVAL``
|
|
error code when applications violate this rule. They must also return an
|
|
EINVAL error code when applications pass an incorrect field or line
|
|
number, or a combination of ``field``, ``line`` and ``id`` which has not
|
|
been negotiated with the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` or
|
|
:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl. When the line numbers are
|
|
unknown the driver must pass the packets in transmitted order. The
|
|
driver can insert empty packets with ``id`` set to zero anywhere in the
|
|
packet array.
|
|
|
|
To assure synchronization and to distinguish from frame dropping, when a
|
|
captured frame does not carry any of the requested data services drivers
|
|
must pass one or more empty packets. When an application fails to pass
|
|
VBI data in time for output, the driver must output the last VPS and WSS
|
|
packet again, and disable the output of Closed Caption and Teletext
|
|
data, or output data which is ignored by Closed Caption and Teletext
|
|
decoders.
|
|
|
|
A sliced VBI device may support :ref:`read/write <rw>` and/or
|
|
streaming (:ref:`memory mapping <mmap>` and/or
|
|
:ref:`user pointer <userp>`) I/O. The latter bears the possibility of
|
|
synchronizing video and VBI data by using buffer timestamps.
|
|
|
|
|
|
Sliced VBI Data in MPEG Streams
|
|
===============================
|
|
|
|
If a device can produce an MPEG output stream, it may be capable of
|
|
providing
|
|
:ref:`negotiated sliced VBI services <sliced-vbi-format-negotitation>`
|
|
as data embedded in the MPEG stream. Users or applications control this
|
|
sliced VBI data insertion with the
|
|
:ref:`V4L2_CID_MPEG_STREAM_VBI_FMT <v4l2-mpeg-stream-vbi-fmt>`
|
|
control.
|
|
|
|
If the driver does not provide the
|
|
:ref:`V4L2_CID_MPEG_STREAM_VBI_FMT <v4l2-mpeg-stream-vbi-fmt>`
|
|
control, or only allows that control to be set to
|
|
:ref:`V4L2_MPEG_STREAM_VBI_FMT_NONE <v4l2-mpeg-stream-vbi-fmt>`,
|
|
then the device cannot embed sliced VBI data in the MPEG stream.
|
|
|
|
The
|
|
:ref:`V4L2_CID_MPEG_STREAM_VBI_FMT <v4l2-mpeg-stream-vbi-fmt>`
|
|
control does not implicitly set the device driver to capture nor cease
|
|
capturing sliced VBI data. The control only indicates to embed sliced
|
|
VBI data in the MPEG stream, if an application has negotiated sliced VBI
|
|
service be captured.
|
|
|
|
It may also be the case that a device can embed sliced VBI data in only
|
|
certain types of MPEG streams: for example in an MPEG-2 PS but not an
|
|
MPEG-2 TS. In this situation, if sliced VBI data insertion is requested,
|
|
the sliced VBI data will be embedded in MPEG stream types when
|
|
supported, and silently omitted from MPEG stream types where sliced VBI
|
|
data insertion is not supported by the device.
|
|
|
|
The following subsections specify the format of the embedded sliced VBI
|
|
data.
|
|
|
|
|
|
MPEG Stream Embedded, Sliced VBI Data Format: NONE
|
|
--------------------------------------------------
|
|
|
|
The
|
|
:ref:`V4L2_MPEG_STREAM_VBI_FMT_NONE <v4l2-mpeg-stream-vbi-fmt>`
|
|
embedded sliced VBI format shall be interpreted by drivers as a control
|
|
to cease embedding sliced VBI data in MPEG streams. Neither the device
|
|
nor driver shall insert "empty" embedded sliced VBI data packets in the
|
|
MPEG stream when this format is set. No MPEG stream data structures are
|
|
specified for this format.
|
|
|
|
|
|
MPEG Stream Embedded, Sliced VBI Data Format: IVTV
|
|
--------------------------------------------------
|
|
|
|
The
|
|
:ref:`V4L2_MPEG_STREAM_VBI_FMT_IVTV <v4l2-mpeg-stream-vbi-fmt>`
|
|
embedded sliced VBI format, when supported, indicates to the driver to
|
|
embed up to 36 lines of sliced VBI data per frame in an MPEG-2 *Private
|
|
Stream 1 PES* packet encapsulated in an MPEG-2 *Program Pack* in the
|
|
MPEG stream.
|
|
|
|
*Historical context*: This format specification originates from a
|
|
custom, embedded, sliced VBI data format used by the ``ivtv`` driver.
|
|
This format has already been informally specified in the kernel sources
|
|
in the file ``Documentation/media/v4l-drivers/cx2341x.rst`` . The
|
|
maximum size of the payload and other aspects of this format are driven
|
|
by the CX23415 MPEG decoder's capabilities and limitations with respect
|
|
to extracting, decoding, and displaying sliced VBI data embedded within
|
|
an MPEG stream.
|
|
|
|
This format's use is *not* exclusive to the ``ivtv`` driver *nor*
|
|
exclusive to CX2341x devices, as the sliced VBI data packet insertion
|
|
into the MPEG stream is implemented in driver software. At least the
|
|
``cx18`` driver provides sliced VBI data insertion into an MPEG-2 PS in
|
|
this format as well.
|
|
|
|
The following definitions specify the payload of the MPEG-2 *Private
|
|
Stream 1 PES* packets that contain sliced VBI data when
|
|
:ref:`V4L2_MPEG_STREAM_VBI_FMT_IVTV <v4l2-mpeg-stream-vbi-fmt>`
|
|
is set. (The MPEG-2 *Private Stream 1 PES* packet header and
|
|
encapsulating MPEG-2 *Program Pack* header are not detailed here. Please
|
|
refer to the MPEG-2 specifications for details on those packet headers.)
|
|
|
|
The payload of the MPEG-2 *Private Stream 1 PES* packets that contain
|
|
sliced VBI data is specified by struct
|
|
:c:type:`v4l2_mpeg_vbi_fmt_ivtv`. The
|
|
payload is variable length, depending on the actual number of lines of
|
|
sliced VBI data present in a video frame. The payload may be padded at
|
|
the end with unspecified fill bytes to align the end of the payload to a
|
|
4-byte boundary. The payload shall never exceed 1552 bytes (2 fields
|
|
with 18 lines/field with 43 bytes of data/line and a 4 byte magic
|
|
number).
|
|
|
|
|
|
.. c:type:: v4l2_mpeg_vbi_fmt_ivtv
|
|
|
|
struct v4l2_mpeg_vbi_fmt_ivtv
|
|
-----------------------------
|
|
|
|
.. tabularcolumns:: |p{1.0cm}|p{3.8cm}|p{1.0cm}|p{11.2cm}|
|
|
|
|
.. flat-table::
|
|
:header-rows: 0
|
|
:stub-columns: 0
|
|
:widths: 1 1 1 2
|
|
|
|
* - __u8
|
|
- ``magic``\ [4]
|
|
-
|
|
- A "magic" constant from :ref:`v4l2-mpeg-vbi-fmt-ivtv-magic` that
|
|
indicates this is a valid sliced VBI data payload and also
|
|
indicates which member of the anonymous union, ``itv0`` or
|
|
``ITV0``, to use for the payload data.
|
|
* - union
|
|
- (anonymous)
|
|
* -
|
|
- struct :c:type:`v4l2_mpeg_vbi_itv0`
|
|
- ``itv0``
|
|
- The primary form of the sliced VBI data payload that contains
|
|
anywhere from 1 to 35 lines of sliced VBI data. Line masks are
|
|
provided in this form of the payload indicating which VBI lines
|
|
are provided.
|
|
* -
|
|
- struct :ref:`v4l2_mpeg_vbi_ITV0 <v4l2-mpeg-vbi-itv0-1>`
|
|
- ``ITV0``
|
|
- An alternate form of the sliced VBI data payload used when 36
|
|
lines of sliced VBI data are present. No line masks are provided
|
|
in this form of the payload; all valid line mask bits are
|
|
implcitly set.
|
|
|
|
|
|
|
|
.. _v4l2-mpeg-vbi-fmt-ivtv-magic:
|
|
|
|
Magic Constants for struct v4l2_mpeg_vbi_fmt_ivtv magic field
|
|
-------------------------------------------------------------
|
|
|
|
.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
|
|
|
|
.. flat-table::
|
|
:header-rows: 1
|
|
:stub-columns: 0
|
|
:widths: 3 1 4
|
|
|
|
* - Defined Symbol
|
|
- Value
|
|
- Description
|
|
* - ``V4L2_MPEG_VBI_IVTV_MAGIC0``
|
|
- "itv0"
|
|
- Indicates the ``itv0`` member of the union in struct
|
|
:c:type:`v4l2_mpeg_vbi_fmt_ivtv` is
|
|
valid.
|
|
* - ``V4L2_MPEG_VBI_IVTV_MAGIC1``
|
|
- "ITV0"
|
|
- Indicates the ``ITV0`` member of the union in struct
|
|
:c:type:`v4l2_mpeg_vbi_fmt_ivtv` is
|
|
valid and that 36 lines of sliced VBI data are present.
|
|
|
|
|
|
|
|
.. c:type:: v4l2_mpeg_vbi_itv0
|
|
|
|
.. c:type:: v4l2_mpeg_vbi_ITV0
|
|
|
|
structs v4l2_mpeg_vbi_itv0 and v4l2_mpeg_vbi_ITV0
|
|
-------------------------------------------------
|
|
|
|
.. tabularcolumns:: |p{4.9cm}|p{2.4cm}|p{10.2cm}|
|
|
|
|
.. flat-table::
|
|
:header-rows: 0
|
|
:stub-columns: 0
|
|
:widths: 1 1 2
|
|
|
|
* - __le32
|
|
- ``linemask``\ [2]
|
|
- Bitmasks indicating the VBI service lines present. These
|
|
``linemask`` values are stored in little endian byte order in the
|
|
MPEG stream. Some reference ``linemask`` bit positions with their
|
|
corresponding VBI line number and video field are given below.
|
|
b\ :sub:`0` indicates the least significant bit of a ``linemask``
|
|
value:
|
|
|
|
|
|
|
|
::
|
|
|
|
linemask[0] b0: line 6 first field
|
|
linemask[0] b17: line 23 first field
|
|
linemask[0] b18: line 6 second field
|
|
linemask[0] b31: line 19 second field
|
|
linemask[1] b0: line 20 second field
|
|
linemask[1] b3: line 23 second field
|
|
linemask[1] b4-b31: unused and set to 0
|
|
* - struct
|
|
:c:type:`v4l2_mpeg_vbi_itv0_line`
|
|
- ``line``\ [35]
|
|
- This is a variable length array that holds from 1 to 35 lines of
|
|
sliced VBI data. The sliced VBI data lines present correspond to
|
|
the bits set in the ``linemask`` array, starting from b\ :sub:`0`
|
|
of ``linemask``\ [0] up through b\ :sub:`31` of ``linemask``\ [0],
|
|
and from b\ :sub:`0` of ``linemask``\ [1] up through b\ :sub:`3` of
|
|
``linemask``\ [1]. ``line``\ [0] corresponds to the first bit
|
|
found set in the ``linemask`` array, ``line``\ [1] corresponds to
|
|
the second bit found set in the ``linemask`` array, etc. If no
|
|
``linemask`` array bits are set, then ``line``\ [0] may contain
|
|
one line of unspecified data that should be ignored by
|
|
applications.
|
|
|
|
|
|
|
|
.. _v4l2-mpeg-vbi-itv0-1:
|
|
|
|
struct v4l2_mpeg_vbi_ITV0
|
|
-------------------------
|
|
|
|
.. tabularcolumns:: |p{4.9cm}|p{4.4cm}|p{8.2cm}|
|
|
|
|
.. flat-table::
|
|
:header-rows: 0
|
|
:stub-columns: 0
|
|
:widths: 1 1 2
|
|
|
|
* - struct
|
|
:c:type:`v4l2_mpeg_vbi_itv0_line`
|
|
- ``line``\ [36]
|
|
- A fixed length array of 36 lines of sliced VBI data. ``line``\ [0]
|
|
through ``line``\ [17] correspond to lines 6 through 23 of the
|
|
first field. ``line``\ [18] through ``line``\ [35] corresponds to
|
|
lines 6 through 23 of the second field.
|
|
|
|
|
|
|
|
.. c:type:: v4l2_mpeg_vbi_itv0_line
|
|
|
|
struct v4l2_mpeg_vbi_itv0_line
|
|
------------------------------
|
|
|
|
.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
|
|
|
|
.. flat-table::
|
|
:header-rows: 0
|
|
:stub-columns: 0
|
|
:widths: 1 1 2
|
|
|
|
* - __u8
|
|
- ``id``
|
|
- A line identifier value from
|
|
:ref:`ITV0-Line-Identifier-Constants` that indicates the type of
|
|
sliced VBI data stored on this line.
|
|
* - __u8
|
|
- ``data``\ [42]
|
|
- The sliced VBI data for the line.
|
|
|
|
|
|
|
|
.. _ITV0-Line-Identifier-Constants:
|
|
|
|
Line Identifiers for struct v4l2_mpeg_vbi_itv0_line id field
|
|
------------------------------------------------------------
|
|
|
|
.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
|
|
|
|
.. flat-table::
|
|
:header-rows: 1
|
|
:stub-columns: 0
|
|
:widths: 3 1 4
|
|
|
|
* - Defined Symbol
|
|
- Value
|
|
- Description
|
|
* - ``V4L2_MPEG_VBI_IVTV_TELETEXT_B``
|
|
- 1
|
|
- Refer to :ref:`Sliced VBI services <vbi-services2>` for a
|
|
description of the line payload.
|
|
* - ``V4L2_MPEG_VBI_IVTV_CAPTION_525``
|
|
- 4
|
|
- Refer to :ref:`Sliced VBI services <vbi-services2>` for a
|
|
description of the line payload.
|
|
* - ``V4L2_MPEG_VBI_IVTV_WSS_625``
|
|
- 5
|
|
- Refer to :ref:`Sliced VBI services <vbi-services2>` for a
|
|
description of the line payload.
|
|
* - ``V4L2_MPEG_VBI_IVTV_VPS``
|
|
- 7
|
|
- Refer to :ref:`Sliced VBI services <vbi-services2>` for a
|
|
description of the line payload.
|
|
|
|
|
|
|
|
.. [#f1]
|
|
According to :ref:`ETS 300 706 <ets300706>` lines 6-22 of the first
|
|
field and lines 5-22 of the second field may carry Teletext data.
|
|
|
|
.. [#f2]
|
|
See also :ref:`vbi-525` and :ref:`vbi-625`.
|