53 lines
2.0 KiB
Plaintext
53 lines
2.0 KiB
Plaintext
* Samsung 10G Ethernet driver (SXGBE)
|
|
|
|
Required properties:
|
|
- compatible: Should be "samsung,sxgbe-v2.0a"
|
|
- reg: Address and length of the register set for the device
|
|
- interrupt-parent: Should be the phandle for the interrupt controller
|
|
that services interrupts for this device
|
|
- interrupts: Should contain the SXGBE interrupts
|
|
These interrupts are ordered by fixed and follows variable
|
|
trasmit DMA interrupts, receive DMA interrupts and lpi interrupt.
|
|
index 0 - this is fixed common interrupt of SXGBE and it is always
|
|
available.
|
|
index 1 to 25 - 8 variable trasmit interrupts, variable 16 receive interrupts
|
|
and 1 optional lpi interrupt.
|
|
- phy-mode: String, operation mode of the PHY interface.
|
|
Supported values are: "sgmii", "xgmii".
|
|
- samsung,pbl: Integer, Programmable Burst Length.
|
|
Supported values are 1, 2, 4, 8, 16, or 32.
|
|
- samsung,burst-map: Integer, Program the possible bursts supported by sxgbe
|
|
This is an integer and represents allowable DMA bursts when fixed burst.
|
|
Allowable range is 0x01-0x3F. When this field is set fixed burst is enabled.
|
|
When fixed length is needed for burst mode, it can be set within allowable
|
|
range.
|
|
|
|
Optional properties:
|
|
- mac-address: 6 bytes, mac address
|
|
- max-frame-size: Maximum Transfer Unit (IEEE defined MTU), rather
|
|
than the maximum frame size.
|
|
|
|
Example:
|
|
|
|
aliases {
|
|
ethernet0 = <&sxgbe0>;
|
|
};
|
|
|
|
sxgbe0: ethernet@1a040000 {
|
|
compatible = "samsung,sxgbe-v2.0a";
|
|
reg = <0 0x1a040000 0 0x10000>;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <0 209 4>, <0 185 4>, <0 186 4>, <0 187 4>,
|
|
<0 188 4>, <0 189 4>, <0 190 4>, <0 191 4>,
|
|
<0 192 4>, <0 193 4>, <0 194 4>, <0 195 4>,
|
|
<0 196 4>, <0 197 4>, <0 198 4>, <0 199 4>,
|
|
<0 200 4>, <0 201 4>, <0 202 4>, <0 203 4>,
|
|
<0 204 4>, <0 205 4>, <0 206 4>, <0 207 4>,
|
|
<0 208 4>, <0 210 4>;
|
|
samsung,pbl = <0x08>
|
|
samsung,burst-map = <0x20>
|
|
mac-address = [ 00 11 22 33 44 55 ]; /* Filled in by U-Boot */
|
|
max-frame-size = <9000>;
|
|
phy-mode = "xgmii";
|
|
};
|