93 lines
2.1 KiB
Plaintext
93 lines
2.1 KiB
Plaintext
Mediatek MT7530 Ethernet switch
|
|
================================
|
|
|
|
Required properties:
|
|
|
|
- compatible: Must be compatible = "mediatek,mt7530";
|
|
- #address-cells: Must be 1.
|
|
- #size-cells: Must be 0.
|
|
- mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part
|
|
on multi-chip module belong to MT7623A has or the remotely standalone
|
|
chip as the function MT7623N reference board provided for.
|
|
- core-supply: Phandle to the regulator node necessary for the core power.
|
|
- io-supply: Phandle to the regulator node necessary for the I/O power.
|
|
See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
|
|
for details for the regulator setup on these boards.
|
|
|
|
If the property mediatek,mcm isn't defined, following property is required
|
|
|
|
- reset-gpios: Should be a gpio specifier for a reset line.
|
|
|
|
Else, following properties are required
|
|
|
|
- resets : Phandle pointing to the system reset controller with
|
|
line index for the ethsys.
|
|
- reset-names : Should be set to "mcm".
|
|
|
|
Required properties for the child nodes within ports container:
|
|
|
|
- reg: Port address described must be 6 for CPU port and from 0 to 5 for
|
|
user ports.
|
|
- phy-mode: String, must be either "trgmii" or "rgmii" for port labeled
|
|
"cpu".
|
|
|
|
See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
|
|
required, optional properties and how the integrated switch subnodes must
|
|
be specified.
|
|
|
|
Example:
|
|
|
|
&mdio0 {
|
|
switch@0 {
|
|
compatible = "mediatek,mt7530";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
|
|
core-supply = <&mt6323_vpa_reg>;
|
|
io-supply = <&mt6323_vemc3v3_reg>;
|
|
reset-gpios = <&pio 33 0>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "lan0";
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan1";
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan2";
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "lan3";
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
label = "wan";
|
|
};
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
label = "cpu";
|
|
ethernet = <&gmac0>;
|
|
phy-mode = "trgmii";
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|