41 lines
1.4 KiB
Plaintext
41 lines
1.4 KiB
Plaintext
* Broadcom UniMAC MDIO bus controller
|
|
|
|
Required properties:
|
|
- compatible: should one from "brcm,genet-mdio-v1", "brcm,genet-mdio-v2",
|
|
"brcm,genet-mdio-v3", "brcm,genet-mdio-v4", "brcm,genet-mdio-v5" or
|
|
"brcm,unimac-mdio"
|
|
- reg: address and length of the register set for the device, first one is the
|
|
base register, and the second one is optional and for indirect accesses to
|
|
larger than 16-bits MDIO transactions
|
|
- reg-names: name(s) of the register must be "mdio" and optional "mdio_indir_rw"
|
|
- #size-cells: must be 1
|
|
- #address-cells: must be 0
|
|
|
|
Optional properties:
|
|
- interrupts: must be one if the interrupt is shared with the Ethernet MAC or
|
|
Ethernet switch this MDIO block is integrated from, or must be two, if there
|
|
are two separate interrupts, first one must be "mdio done" and second must be
|
|
for "mdio error"
|
|
- interrupt-names: must be "mdio_done_error" when there is a share interrupt fed
|
|
to this hardware block, or must be "mdio_done" for the first interrupt and
|
|
"mdio_error" for the second when there are separate interrupts
|
|
|
|
Child nodes of this MDIO bus controller node are standard Ethernet PHY device
|
|
nodes as described in Documentation/devicetree/bindings/net/phy.txt
|
|
|
|
Example:
|
|
|
|
mdio@403c0 {
|
|
compatible = "brcm,unimac-mdio";
|
|
reg = <0x403c0 0x8 0x40300 0x18>;
|
|
reg-names = "mdio", "mdio_indir_rw";
|
|
#size-cells = <1>;
|
|
#address-cells = <0>;
|
|
|
|
...
|
|
phy@0 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0>;
|
|
};
|
|
};
|