87 lines
2.2 KiB
Plaintext
87 lines
2.2 KiB
Plaintext
* Freescale MXS LCD Interface (LCDIF)
|
|
|
|
New bindings:
|
|
=============
|
|
Required properties:
|
|
- compatible: Should be "fsl,imx23-lcdif" for i.MX23.
|
|
Should be "fsl,imx28-lcdif" for i.MX28.
|
|
Should be "fsl,imx6sx-lcdif" for i.MX6SX.
|
|
- reg: Address and length of the register set for LCDIF
|
|
- interrupts: Should contain LCDIF interrupt
|
|
- clocks: A list of phandle + clock-specifier pairs, one for each
|
|
entry in 'clock-names'.
|
|
- clock-names: A list of clock names. For MXSFB it should contain:
|
|
- "pix" for the LCDIF block clock
|
|
- (MX6SX-only) "axi", "disp_axi" for the bus interface clock
|
|
|
|
Required sub-nodes:
|
|
- port: The connection to an encoder chip.
|
|
|
|
Example:
|
|
|
|
lcdif1: display-controller@2220000 {
|
|
compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
|
|
reg = <0x02220000 0x4000>;
|
|
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
|
|
<&clks IMX6SX_CLK_LCDIF_APB>,
|
|
<&clks IMX6SX_CLK_DISPLAY_AXI>;
|
|
clock-names = "pix", "axi", "disp_axi";
|
|
|
|
port {
|
|
parallel_out: endpoint {
|
|
remote-endpoint = <&panel_in_parallel>;
|
|
};
|
|
};
|
|
};
|
|
|
|
Deprecated bindings:
|
|
====================
|
|
Required properties:
|
|
- compatible: Should be "fsl,imx23-lcdif" for i.MX23.
|
|
Should be "fsl,imx28-lcdif" for i.MX28.
|
|
- reg: Address and length of the register set for LCDIF
|
|
- interrupts: Should contain LCDIF interrupts
|
|
- display: phandle to display node (see below for details)
|
|
|
|
* display node
|
|
|
|
Required properties:
|
|
- bits-per-pixel: <16> for RGB565, <32> for RGB888/666.
|
|
- bus-width: number of data lines. Could be <8>, <16>, <18> or <24>.
|
|
|
|
Required sub-node:
|
|
- display-timings: Refer to binding doc display-timing.txt for details.
|
|
|
|
Examples:
|
|
|
|
lcdif@80030000 {
|
|
compatible = "fsl,imx28-lcdif";
|
|
reg = <0x80030000 2000>;
|
|
interrupts = <38 86>;
|
|
|
|
display: display {
|
|
bits-per-pixel = <32>;
|
|
bus-width = <24>;
|
|
|
|
display-timings {
|
|
native-mode = <&timing0>;
|
|
timing0: timing0 {
|
|
clock-frequency = <33500000>;
|
|
hactive = <800>;
|
|
vactive = <480>;
|
|
hfront-porch = <164>;
|
|
hback-porch = <89>;
|
|
hsync-len = <10>;
|
|
vback-porch = <23>;
|
|
vfront-porch = <10>;
|
|
vsync-len = <10>;
|
|
hsync-active = <0>;
|
|
vsync-active = <0>;
|
|
de-active = <1>;
|
|
pixelclk-active = <0>;
|
|
};
|
|
};
|
|
};
|
|
};
|