/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright 2000-2015 Avago Technologies. All rights reserved. * * * Name: mpi2_ioc.h * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages * Creation Date: October 11, 2006 * * mpi2_ioc.h Version: 02.00.32 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used * with MPI v2.0 products. Unless otherwise noted, names beginning with * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. * * Version History * --------------- * * Date Version Description * -------- -------- ------------------------------------------------------ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to * MaxTargets. * Added TotalImageSize field to FWDownload Request. * Added reserved words to FWUpload Request. * 06-26-07 02.00.02 Added IR Configuration Change List Event. * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit * request and replaced it with * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth. * Replaced the MinReplyQueueDepth field of the IOCFacts * reply with MaxReplyDescriptorPostQueueDepth. * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum * depth for the Reply Descriptor Post Queue. * Added SASAddress field to Initiator Device Table * Overflow Event data. * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING * for SAS Initiator Device Status Change Event data. * Modified Reason Code defines for SAS Topology Change * List Event data, including adding a bit for PHY Vacant * status, and adding a mask for the Reason Code. * Added define for * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING. * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID. * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of * the IOCFacts Reply. * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. * Moved MPI2_VERSION_UNION to mpi2.h. * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks * instead of enables, and added SASBroadcastPrimitiveMasks * field. * Added Log Entry Added Event and related structure. * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID. * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET. * Added MaxVolumes and MaxPersistentEntries fields to * IOCFacts reply. * Added ProtocalFlags and IOCCapabilities fields to * MPI2_FW_IMAGE_HEADER. * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT. * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to * a U16 (from a U32). * Removed extra 's' from EventMasks name. * 06-27-08 02.00.08 Fixed an offset in a comment. * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST. * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and * renamed MinReplyFrameSize to ReplyFrameSize. * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX. * Added two new RAIDOperation values for Integrated RAID * Operations Status Event data. * Added four new IR Configuration Change List Event data * ReasonCode values. * Added two new ReasonCode defines for SAS Device Status * Change Event data. * Added three new DiscoveryStatus bits for the SAS * Discovery event data. * Added Multiplexing Status Change bit to the PhyStatus * field of the SAS Topology Change List event data. * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY. * BootFlags are now product-specific. * Added defines for the indivdual signature bytes * for MPI2_INIT_IMAGE_FOOTER. * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define. * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR * define. * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE * define. * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define. * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define. * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define. * Added two new reason codes for SAS Device Status Change * Event. * Added new event: SAS PHY Counter. * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure. * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. * Added new product id family for 2208. * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST. * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY. * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY. * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY. * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define. * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define. * Added Host Based Discovery Phy Event data. * Added defines for ProductID Product field * (MPI2_FW_HEADER_PID_). * Modified values for SAS ProductID Family * (MPI2_FW_HEADER_PID_FAMILY_). * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines. * Added PowerManagementControl Request structures and * defines. * 05-12-10 02.00.15 Marked Task Set Full Event as obsolete. * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define. * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC. * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added * SASNotifyPrimitiveMasks field to * MPI2_EVENT_NOTIFICATION_REQUEST. * Added Temperature Threshold Event. * Added Host Message Event. * Added Send Host Message request and reply. * 05-25-11 02.00.18 For Extended Image Header, added * MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and * MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines. * Deprecated MPI2_EXT_IMAGE_TYPE_MAX define. * 08-24-11 02.00.19 Added PhysicalPort field to * MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure. * Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete. * 11-18-11 02.00.20 Incorporating additions for MPI v2.5. * 03-29-12 02.00.21 Added a product specific range to event values. * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE. * Added ElapsedSeconds field to * MPI2_EVENT_DATA_IR_OPERATION_STATUS. * 08-19-13 02.00.23 For IOCInit, added MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE * and MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY. * Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE. * Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY. * Added Encrypted Hash Extended Image. * 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS. * 11-18-14 02.00.25 Updated copyright information. * 03-16-15 02.00.26 Updated for MPI v2.6. * Added MPI2_EVENT_ACTIVE_CABLE_EXCEPTION and * MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT. * Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and * MPI26_FW_HEADER_PID_FAMILY_3516_SAS. * Added MPI26_CTRL_OP_SHUTDOWN. * 08-25-15 02.00.27 Added IC ARCH Class based signature defines. * Added MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED event. * Added ConigurationFlags field to IOCInit message to * support NVMe SGL format control. * Added PCIe SRIOV support. * 02-17-16 02.00.28 Added SAS 4 22.5 gbs speed support. * Added PCIe 4 16.0 GT/sec speec support. * Removed AHCI support. * Removed SOP support. * 07-01-16 02.00.29 Added Archclass for 4008 product. * Added IOCException MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED * 08-23-16 02.00.30 Added new defines for the ImageType field of FWDownload * Request Message. * Added new defines for the ImageType field of FWUpload * Request Message. * Added new values for the RegionType field in the Layout * Data sections of the FLASH Layout Extended Image Data. * Added new defines for the ReasonCode field of * Active Cable Exception Event. * Added MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE and * MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE. * 11-23-16 02.00.31 Added MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR and * MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR. * 02-02-17 02.00.32 Added MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP. * Added MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT and related * defines for the ReasonCode field. * -------------------------------------------------------------------------- */ #ifndef MPI2_IOC_H #define MPI2_IOC_H /***************************************************************************** * * IOC Messages * *****************************************************************************/ /**************************************************************************** * IOCInit message ****************************************************************************/ /*IOCInit Request message */ typedef struct _MPI2_IOC_INIT_REQUEST { U8 WhoInit; /*0x00 */ U8 Reserved1; /*0x01 */ U8 ChainOffset; /*0x02 */ U8 Function; /*0x03 */ U16 Reserved2; /*0x04 */ U8 Reserved3; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved4; /*0x0A */ U16 MsgVersion; /*0x0C */ U16 HeaderVersion; /*0x0E */ U32 Reserved5; /*0x10 */ U16 ConfigurationFlags; /* 0x14 */ U8 HostPageSize; /*0x16 */ U8 HostMSIxVectors; /*0x17 */ U16 Reserved8; /*0x18 */ U16 SystemRequestFrameSize; /*0x1A */ U16 ReplyDescriptorPostQueueDepth; /*0x1C */ U16 ReplyFreeQueueDepth; /*0x1E */ U32 SenseBufferAddressHigh; /*0x20 */ U32 SystemReplyAddressHigh; /*0x24 */ U64 SystemRequestFrameBaseAddress; /*0x28 */ U64 ReplyDescriptorPostQueueAddress; /*0x30 */ U64 ReplyFreeQueueAddress; /*0x38 */ U64 TimeStamp; /*0x40 */ } MPI2_IOC_INIT_REQUEST, *PTR_MPI2_IOC_INIT_REQUEST, Mpi2IOCInitRequest_t, *pMpi2IOCInitRequest_t; /*WhoInit values */ #define MPI2_WHOINIT_NOT_INITIALIZED (0x00) #define MPI2_WHOINIT_SYSTEM_BIOS (0x01) #define MPI2_WHOINIT_ROM_BIOS (0x02) #define MPI2_WHOINIT_PCI_PEER (0x03) #define MPI2_WHOINIT_HOST_DRIVER (0x04) #define MPI2_WHOINIT_MANUFACTURER (0x05) /* MsgFlags */ #define MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE (0x01) /*MsgVersion */ #define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK (0xFF00) #define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT (8) #define MPI2_IOCINIT_MSGVERSION_MINOR_MASK (0x00FF) #define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT (0) /*HeaderVersion */ #define MPI2_IOCINIT_HDRVERSION_UNIT_MASK (0xFF00) #define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT (8) #define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF) #define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0) /*ConfigurationFlags */ #define MPI26_IOCINIT_CFGFLAGS_NVME_SGL_FORMAT (0x0001) /*minimum depth for a Reply Descriptor Post Queue */ #define MPI2_RDPQ_DEPTH_MIN (16) /* Reply Descriptor Post Queue Array Entry */ typedef struct _MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY { U64 RDPQBaseAddress; /* 0x00 */ U32 Reserved1; /* 0x08 */ U32 Reserved2; /* 0x0C */ } MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY, *PTR_MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY, Mpi2IOCInitRDPQArrayEntry, *pMpi2IOCInitRDPQArrayEntry; /*IOCInit Reply message */ typedef struct _MPI2_IOC_INIT_REPLY { U8 WhoInit; /*0x00 */ U8 Reserved1; /*0x01 */ U8 MsgLength; /*0x02 */ U8 Function; /*0x03 */ U16 Reserved2; /*0x04 */ U8 Reserved3; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved4; /*0x0A */ U16 Reserved5; /*0x0C */ U16 IOCStatus; /*0x0E */ U32 IOCLogInfo; /*0x10 */ } MPI2_IOC_INIT_REPLY, *PTR_MPI2_IOC_INIT_REPLY, Mpi2IOCInitReply_t, *pMpi2IOCInitReply_t; /**************************************************************************** * IOCFacts message ****************************************************************************/ /*IOCFacts Request message */ typedef struct _MPI2_IOC_FACTS_REQUEST { U16 Reserved1; /*0x00 */ U8 ChainOffset; /*0x02 */ U8 Function; /*0x03 */ U16 Reserved2; /*0x04 */ U8 Reserved3; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved4; /*0x0A */ } MPI2_IOC_FACTS_REQUEST, *PTR_MPI2_IOC_FACTS_REQUEST, Mpi2IOCFactsRequest_t, *pMpi2IOCFactsRequest_t; /*IOCFacts Reply message */ typedef struct _MPI2_IOC_FACTS_REPLY { U16 MsgVersion; /*0x00 */ U8 MsgLength; /*0x02 */ U8 Function; /*0x03 */ U16 HeaderVersion; /*0x04 */ U8 IOCNumber; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved1; /*0x0A */ U16 IOCExceptions; /*0x0C */ U16 IOCStatus; /*0x0E */ U32 IOCLogInfo; /*0x10 */ U8 MaxChainDepth; /*0x14 */ U8 WhoInit; /*0x15 */ U8 NumberOfPorts; /*0x16 */ U8 MaxMSIxVectors; /*0x17 */ U16 RequestCredit; /*0x18 */ U16 ProductID; /*0x1A */ U32 IOCCapabilities; /*0x1C */ MPI2_VERSION_UNION FWVersion; /*0x20 */ U16 IOCRequestFrameSize; /*0x24 */ U16 IOCMaxChainSegmentSize; /*0x26 */ U16 MaxInitiators; /*0x28 */ U16 MaxTargets; /*0x2A */ U16 MaxSasExpanders; /*0x2C */ U16 MaxEnclosures; /*0x2E */ U16 ProtocolFlags; /*0x30 */ U16 HighPriorityCredit; /*0x32 */ U16 MaxReplyDescriptorPostQueueDepth; /*0x34 */ U8 ReplyFrameSize; /*0x36 */ U8 MaxVolumes; /*0x37 */ U16 MaxDevHandle; /*0x38 */ U16 MaxPersistentEntries; /*0x3A */ U16 MinDevHandle; /*0x3C */ U8 CurrentHostPageSize; /* 0x3E */ U8 Reserved4; /* 0x3F */ U8 SGEModifierMask; /*0x40 */ U8 SGEModifierValue; /*0x41 */ U8 SGEModifierShift; /*0x42 */ U8 Reserved5; /*0x43 */ } MPI2_IOC_FACTS_REPLY, *PTR_MPI2_IOC_FACTS_REPLY, Mpi2IOCFactsReply_t, *pMpi2IOCFactsReply_t; /*MsgVersion */ #define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00) #define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT (8) #define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF) #define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT (0) /*HeaderVersion */ #define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK (0xFF00) #define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT (8) #define MPI2_IOCFACTS_HDRVERSION_DEV_MASK (0x00FF) #define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0) /*IOCExceptions */ #define MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED (0x0400) #define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200) #define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100) #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0) #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD (0x0000) #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP (0x0020) #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED (0x0040) #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP (0x0060) #define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010) #define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0008) #define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004) #define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002) #define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001) /*defines for WhoInit field are after the IOCInit Request */ /*ProductID field uses MPI2_FW_HEADER_PID_ */ /*IOCCapabilities */ #define MPI26_IOCFACTS_CAPABILITY_PCIE_SRIOV (0x00100000) #define MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ (0x00080000) #define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE (0x00040000) #define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE (0x00020000) #define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY (0x00010000) #define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX (0x00008000) #define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR (0x00004000) #define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000) #define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000) #define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800) #define MPI2_IOCFACTS_CAPABILITY_MULTICAST (0x00000100) #define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET (0x00000080) #define MPI2_IOCFACTS_CAPABILITY_EEDP (0x00000040) #define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020) #define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010) #define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008) #define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004) /*ProtocolFlags */ #define MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES (0x0008) #define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002) #define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001) /**************************************************************************** * PortFacts message ****************************************************************************/ /*PortFacts Request message */ typedef struct _MPI2_PORT_FACTS_REQUEST { U16 Reserved1; /*0x00 */ U8 ChainOffset; /*0x02 */ U8 Function; /*0x03 */ U16 Reserved2; /*0x04 */ U8 PortNumber; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved3; /*0x0A */ } MPI2_PORT_FACTS_REQUEST, *PTR_MPI2_PORT_FACTS_REQUEST, Mpi2PortFactsRequest_t, *pMpi2PortFactsRequest_t; /*PortFacts Reply message */ typedef struct _MPI2_PORT_FACTS_REPLY { U16 Reserved1; /*0x00 */ U8 MsgLength; /*0x02 */ U8 Function; /*0x03 */ U16 Reserved2; /*0x04 */ U8 PortNumber; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved3; /*0x0A */ U16 Reserved4; /*0x0C */ U16 IOCStatus; /*0x0E */ U32 IOCLogInfo; /*0x10 */ U8 Reserved5; /*0x14 */ U8 PortType; /*0x15 */ U16 Reserved6; /*0x16 */ U16 MaxPostedCmdBuffers; /*0x18 */ U16 Reserved7; /*0x1A */ } MPI2_PORT_FACTS_REPLY, *PTR_MPI2_PORT_FACTS_REPLY, Mpi2PortFactsReply_t, *pMpi2PortFactsReply_t; /*PortType values */ #define MPI2_PORTFACTS_PORTTYPE_INACTIVE (0x00) #define MPI2_PORTFACTS_PORTTYPE_FC (0x10) #define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20) #define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30) #define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31) #define MPI2_PORTFACTS_PORTTYPE_TRI_MODE (0x40) /**************************************************************************** * PortEnable message ****************************************************************************/ /*PortEnable Request message */ typedef struct _MPI2_PORT_ENABLE_REQUEST { U16 Reserved1; /*0x00 */ U8 ChainOffset; /*0x02 */ U8 Function; /*0x03 */ U8 Reserved2; /*0x04 */ U8 PortFlags; /*0x05 */ U8 Reserved3; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved4; /*0x0A */ } MPI2_PORT_ENABLE_REQUEST, *PTR_MPI2_PORT_ENABLE_REQUEST, Mpi2PortEnableRequest_t, *pMpi2PortEnableRequest_t; /*PortEnable Reply message */ typedef struct _MPI2_PORT_ENABLE_REPLY { U16 Reserved1; /*0x00 */ U8 MsgLength; /*0x02 */ U8 Function; /*0x03 */ U8 Reserved2; /*0x04 */ U8 PortFlags; /*0x05 */ U8 Reserved3; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved4; /*0x0A */ U16 Reserved5; /*0x0C */ U16 IOCStatus; /*0x0E */ U32 IOCLogInfo; /*0x10 */ } MPI2_PORT_ENABLE_REPLY, *PTR_MPI2_PORT_ENABLE_REPLY, Mpi2PortEnableReply_t, *pMpi2PortEnableReply_t; /**************************************************************************** * EventNotification message ****************************************************************************/ /*EventNotification Request message */ #define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS (4) typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST { U16 Reserved1; /*0x00 */ U8 ChainOffset; /*0x02 */ U8 Function; /*0x03 */ U16 Reserved2; /*0x04 */ U8 Reserved3; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved4; /*0x0A */ U32 Reserved5; /*0x0C */ U32 Reserved6; /*0x10 */ U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; /*0x14 */ U16 SASBroadcastPrimitiveMasks; /*0x24 */ U16 SASNotifyPrimitiveMasks; /*0x26 */ U32 Reserved8; /*0x28 */ } MPI2_EVENT_NOTIFICATION_REQUEST, *PTR_MPI2_EVENT_NOTIFICATION_REQUEST, Mpi2EventNotificationRequest_t, *pMpi2EventNotificationRequest_t; /*EventNotification Reply message */ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY { U16 EventDataLength; /*0x00 */ U8 MsgLength; /*0x02 */ U8 Function; /*0x03 */ U16 Reserved1; /*0x04 */ U8 AckRequired; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved2; /*0x0A */ U16 Reserved3; /*0x0C */ U16 IOCStatus; /*0x0E */ U32 IOCLogInfo; /*0x10 */ U16 Event; /*0x14 */ U16 Reserved4; /*0x16 */ U32 EventContext; /*0x18 */ U32 EventData[1]; /*0x1C */ } MPI2_EVENT_NOTIFICATION_REPLY, *PTR_MPI2_EVENT_NOTIFICATION_REPLY, Mpi2EventNotificationReply_t, *pMpi2EventNotificationReply_t; /*AckRequired */ #define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00) #define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED (0x01) /*Event */ #define MPI2_EVENT_LOG_DATA (0x0001) #define MPI2_EVENT_STATE_CHANGE (0x0002) #define MPI2_EVENT_HARD_RESET_RECEIVED (0x0005) #define MPI2_EVENT_EVENT_CHANGE (0x000A) #define MPI2_EVENT_TASK_SET_FULL (0x000E) /*obsolete */ #define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE (0x000F) #define MPI2_EVENT_IR_OPERATION_STATUS (0x0014) #define MPI2_EVENT_SAS_DISCOVERY (0x0016) #define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE (0x0017) #define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x0018) #define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019) #define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C) #define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D) #define MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE (0x001D) #define MPI2_EVENT_IR_VOLUME (0x001E) #define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F) #define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020) #define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021) #define MPI2_EVENT_SAS_PHY_COUNTER (0x0022) #define MPI2_EVENT_GPIO_INTERRUPT (0x0023) #define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024) #define MPI2_EVENT_SAS_QUIESCE (0x0025) #define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE (0x0026) #define MPI2_EVENT_TEMP_THRESHOLD (0x0027) #define MPI2_EVENT_HOST_MESSAGE (0x0028) #define MPI2_EVENT_POWER_PERFORMANCE_CHANGE (0x0029) #define MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE (0x0030) #define MPI2_EVENT_PCIE_ENUMERATION (0x0031) #define MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST (0x0032) #define MPI2_EVENT_PCIE_LINK_COUNTER (0x0033) #define MPI2_EVENT_ACTIVE_CABLE_EXCEPTION (0x0034) #define MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR (0x0035) #define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E) #define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F) /*Log Entry Added Event data */ /*the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */ #define MPI2_EVENT_DATA_LOG_DATA_LENGTH (0x1C) typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED { U64 TimeStamp; /*0x00 */ U32 Reserved1; /*0x08 */ U16 LogSequence; /*0x0C */ U16 LogEntryQualifier; /*0x0E */ U8 VP_ID; /*0x10 */ U8 VF_ID; /*0x11 */ U16 Reserved2; /*0x12 */ U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH]; /*0x14 */ } MPI2_EVENT_DATA_LOG_ENTRY_ADDED, *PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED, Mpi2EventDataLogEntryAdded_t, *pMpi2EventDataLogEntryAdded_t; /*GPIO Interrupt Event data */ typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT { U8 GPIONum; /*0x00 */ U8 Reserved1; /*0x01 */ U16 Reserved2; /*0x02 */ } MPI2_EVENT_DATA_GPIO_INTERRUPT, *PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT, Mpi2EventDataGpioInterrupt_t, *pMpi2EventDataGpioInterrupt_t; /*Temperature Threshold Event data */ typedef struct _MPI2_EVENT_DATA_TEMPERATURE { U16 Status; /*0x00 */ U8 SensorNum; /*0x02 */ U8 Reserved1; /*0x03 */ U16 CurrentTemperature; /*0x04 */ U16 Reserved2; /*0x06 */ U32 Reserved3; /*0x08 */ U32 Reserved4; /*0x0C */ } MPI2_EVENT_DATA_TEMPERATURE, *PTR_MPI2_EVENT_DATA_TEMPERATURE, Mpi2EventDataTemperature_t, *pMpi2EventDataTemperature_t; /*Temperature Threshold Event data Status bits */ #define MPI2_EVENT_TEMPERATURE3_EXCEEDED (0x0008) #define MPI2_EVENT_TEMPERATURE2_EXCEEDED (0x0004) #define MPI2_EVENT_TEMPERATURE1_EXCEEDED (0x0002) #define MPI2_EVENT_TEMPERATURE0_EXCEEDED (0x0001) /*Host Message Event data */ typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE { U8 SourceVF_ID; /*0x00 */ U8 Reserved1; /*0x01 */ U16 Reserved2; /*0x02 */ U32 Reserved3; /*0x04 */ U32 HostData[1]; /*0x08 */ } MPI2_EVENT_DATA_HOST_MESSAGE, *PTR_MPI2_EVENT_DATA_HOST_MESSAGE, Mpi2EventDataHostMessage_t, *pMpi2EventDataHostMessage_t; /*Power Performance Change Event data */ typedef struct _MPI2_EVENT_DATA_POWER_PERF_CHANGE { U8 CurrentPowerMode; /*0x00 */ U8 PreviousPowerMode; /*0x01 */ U16 Reserved1; /*0x02 */ } MPI2_EVENT_DATA_POWER_PERF_CHANGE, *PTR_MPI2_EVENT_DATA_POWER_PERF_CHANGE, Mpi2EventDataPowerPerfChange_t, *pMpi2EventDataPowerPerfChange_t; /*defines for CurrentPowerMode and PreviousPowerMode fields */ #define MPI2_EVENT_PM_INIT_MASK (0xC0) #define MPI2_EVENT_PM_INIT_UNAVAILABLE (0x00) #define MPI2_EVENT_PM_INIT_HOST (0x40) #define MPI2_EVENT_PM_INIT_IO_UNIT (0x80) #define MPI2_EVENT_PM_INIT_PCIE_DPA (0xC0) #define MPI2_EVENT_PM_MODE_MASK (0x07) #define MPI2_EVENT_PM_MODE_UNAVAILABLE (0x00) #define MPI2_EVENT_PM_MODE_UNKNOWN (0x01) #define MPI2_EVENT_PM_MODE_FULL_POWER (0x04) #define MPI2_EVENT_PM_MODE_REDUCED_POWER (0x05) #define MPI2_EVENT_PM_MODE_STANDBY (0x06) /* Active Cable Exception Event data */ typedef struct _MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT { U32 ActiveCablePowerRequirement; /* 0x00 */ U8 ReasonCode; /* 0x04 */ U8 ReceptacleID; /* 0x05 */ U16 Reserved1; /* 0x06 */ } MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT, *PTR_MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT, Mpi25EventDataActiveCableExcept_t, *pMpi25EventDataActiveCableExcept_t, MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT, *PTR_MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT, Mpi26EventDataActiveCableExcept_t, *pMpi26EventDataActiveCableExcept_t; /*MPI2.5 defines for the ReasonCode field */ #define MPI25_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00) #define MPI25_EVENT_ACTIVE_CABLE_PRESENT (0x01) #define MPI25_EVENT_ACTIVE_CABLE_DEGRADED (0x02) /* defines for ReasonCode field */ #define MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00) #define MPI26_EVENT_ACTIVE_CABLE_PRESENT (0x01) #define MPI26_EVENT_ACTIVE_CABLE_DEGRADED (0x02) /*Hard Reset Received Event data */ typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED { U8 Reserved1; /*0x00 */ U8 Port; /*0x01 */ U16 Reserved2; /*0x02 */ } MPI2_EVENT_DATA_HARD_RESET_RECEIVED, *PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED, Mpi2EventDataHardResetReceived_t, *pMpi2EventDataHardResetReceived_t; /*Task Set Full Event data */ /* this event is obsolete */ typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL { U16 DevHandle; /*0x00 */ U16 CurrentDepth; /*0x02 */ } MPI2_EVENT_DATA_TASK_SET_FULL, *PTR_MPI2_EVENT_DATA_TASK_SET_FULL, Mpi2EventDataTaskSetFull_t, *pMpi2EventDataTaskSetFull_t; /*SAS Device Status Change Event data */ typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE { U16 TaskTag; /*0x00 */ U8 ReasonCode; /*0x02 */ U8 PhysicalPort; /*0x03 */ U8 ASC; /*0x04 */ U8 ASCQ; /*0x05 */ U16 DevHandle; /*0x06 */ U32 Reserved2; /*0x08 */ U64 SASAddress; /*0x0C */ U8 LUN[8]; /*0x14 */ } MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, *PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, Mpi2EventDataSasDeviceStatusChange_t, *pMpi2EventDataSasDeviceStatusChange_t; /*SAS Device Status Change Event data ReasonCode values */ #define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) #define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) #define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) #define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) #define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) #define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) #define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) #define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) #define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) #define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) #define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10) #define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY (0x11) #define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY (0x12) /*Integrated RAID Operation Status Event data */ typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS { U16 VolDevHandle; /*0x00 */ U16 Reserved1; /*0x02 */ U8 RAIDOperation; /*0x04 */ U8 PercentComplete; /*0x05 */ U16 Reserved2; /*0x06 */ U32 ElapsedSeconds; /*0x08 */ } MPI2_EVENT_DATA_IR_OPERATION_STATUS, *PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS, Mpi2EventDataIrOperationStatus_t, *pMpi2EventDataIrOperationStatus_t; /*Integrated RAID Operation Status Event data RAIDOperation values */ #define MPI2_EVENT_IR_RAIDOP_RESYNC (0x00) #define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION (0x01) #define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK (0x02) #define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT (0x03) #define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT (0x04) /*Integrated RAID Volume Event data */ typedef struct _MPI2_EVENT_DATA_IR_VOLUME { U16 VolDevHandle; /*0x00 */ U8 ReasonCode; /*0x02 */ U8 Reserved1; /*0x03 */ U32 NewValue; /*0x04 */ U32 PreviousValue; /*0x08 */ } MPI2_EVENT_DATA_IR_VOLUME, *PTR_MPI2_EVENT_DATA_IR_VOLUME, Mpi2EventDataIrVolume_t, *pMpi2EventDataIrVolume_t; /*Integrated RAID Volume Event data ReasonCode values */ #define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED (0x01) #define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED (0x02) #define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED (0x03) /*Integrated RAID Physical Disk Event data */ typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK { U16 Reserved1; /*0x00 */ U8 ReasonCode; /*0x02 */ U8 PhysDiskNum; /*0x03 */ U16 PhysDiskDevHandle; /*0x04 */ U16 Reserved2; /*0x06 */ U16 Slot; /*0x08 */ U16 EnclosureHandle; /*0x0A */ U32 NewValue; /*0x0C */ U32 PreviousValue; /*0x10 */ } MPI2_EVENT_DATA_IR_PHYSICAL_DISK, *PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK, Mpi2EventDataIrPhysicalDisk_t, *pMpi2EventDataIrPhysicalDisk_t; /*Integrated RAID Physical Disk Event data ReasonCode values */ #define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED (0x01) #define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED (0x02) #define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED (0x03) /*Integrated RAID Configuration Change List Event data */ /* *Host code (drivers, BIOS, utilities, etc.) should leave this define set to *one and check NumElements at runtime. */ #ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT #define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT (1) #endif typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT { U16 ElementFlags; /*0x00 */ U16 VolDevHandle; /*0x02 */ U8 ReasonCode; /*0x04 */ U8 PhysDiskNum; /*0x05 */ U16 PhysDiskDevHandle; /*0x06 */ } MPI2_EVENT_IR_CONFIG_ELEMENT, *PTR_MPI2_EVENT_IR_CONFIG_ELEMENT, Mpi2EventIrConfigElement_t, *pMpi2EventIrConfigElement_t; /*IR Configuration Change List Event data ElementFlags values */ #define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK (0x000F) #define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT (0x0000) #define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001) #define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT (0x0002) /*IR Configuration Change List Event data ReasonCode values */ #define MPI2_EVENT_IR_CHANGE_RC_ADDED (0x01) #define MPI2_EVENT_IR_CHANGE_RC_REMOVED (0x02) #define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE (0x03) #define MPI2_EVENT_IR_CHANGE_RC_HIDE (0x04) #define MPI2_EVENT_IR_CHANGE_RC_UNHIDE (0x05) #define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED (0x06) #define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED (0x07) #define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED (0x08) #define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED (0x09) typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST { U8 NumElements; /*0x00 */ U8 Reserved1; /*0x01 */ U8 Reserved2; /*0x02 */ U8 ConfigNum; /*0x03 */ U32 Flags; /*0x04 */ MPI2_EVENT_IR_CONFIG_ELEMENT ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT];/*0x08 */ } MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, *PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, Mpi2EventDataIrConfigChangeList_t, *pMpi2EventDataIrConfigChangeList_t; /*IR Configuration Change List Event data Flags values */ #define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG (0x00000001) /*SAS Discovery Event data */ typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY { U8 Flags; /*0x00 */ U8 ReasonCode; /*0x01 */ U8 PhysicalPort; /*0x02 */ U8 Reserved1; /*0x03 */ U32 DiscoveryStatus; /*0x04 */ } MPI2_EVENT_DATA_SAS_DISCOVERY, *PTR_MPI2_EVENT_DATA_SAS_DISCOVERY, Mpi2EventDataSasDiscovery_t, *pMpi2EventDataSasDiscovery_t; /*SAS Discovery Event data Flags values */ #define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE (0x02) #define MPI2_EVENT_SAS_DISC_IN_PROGRESS (0x01) /*SAS Discovery Event data ReasonCode values */ #define MPI2_EVENT_SAS_DISC_RC_STARTED (0x01) #define MPI2_EVENT_SAS_DISC_RC_COMPLETED (0x02) /*SAS Discovery Event data DiscoveryStatus values */ #define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED (0x80000000) #define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED (0x40000000) #define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED (0x20000000) #define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) #define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR (0x08000000) #define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) #define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) #define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN (0x00002000) #define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) #define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE (0x00000800) #define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK (0x00000400) #define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK (0x00000200) #define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR (0x00000100) #define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED (0x00000080) #define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST (0x00000040) #define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES (0x00000020) #define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT (0x00000010) #define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS (0x00000004) #define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE (0x00000002) #define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED (0x00000001) /*SAS Broadcast Primitive Event data */ typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE { U8 PhyNum; /*0x00 */ U8 Port; /*0x01 */ U8 PortWidth; /*0x02 */ U8 Primitive; /*0x03 */ } MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, *PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, Mpi2EventDataSasBroadcastPrimitive_t, *pMpi2EventDataSasBroadcastPrimitive_t; /*defines for the Primitive field */ #define MPI2_EVENT_PRIMITIVE_CHANGE (0x01) #define MPI2_EVENT_PRIMITIVE_SES (0x02) #define MPI2_EVENT_PRIMITIVE_EXPANDER (0x03) #define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04) #define MPI2_EVENT_PRIMITIVE_RESERVED3 (0x05) #define MPI2_EVENT_PRIMITIVE_RESERVED4 (0x06) #define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07) #define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08) /*SAS Notify Primitive Event data */ typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE { U8 PhyNum; /*0x00 */ U8 Port; /*0x01 */ U8 Reserved1; /*0x02 */ U8 Primitive; /*0x03 */ } MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, *PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, Mpi2EventDataSasNotifyPrimitive_t, *pMpi2EventDataSasNotifyPrimitive_t; /*defines for the Primitive field */ #define MPI2_EVENT_NOTIFY_ENABLE_SPINUP (0x01) #define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED (0x02) #define MPI2_EVENT_NOTIFY_RESERVED1 (0x03) #define MPI2_EVENT_NOTIFY_RESERVED2 (0x04) /*SAS Initiator Device Status Change Event data */ typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE { U8 ReasonCode; /*0x00 */ U8 PhysicalPort; /*0x01 */ U16 DevHandle; /*0x02 */ U64 SASAddress; /*0x04 */ } MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, *PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, Mpi2EventDataSasInitDevStatusChange_t, *pMpi2EventDataSasInitDevStatusChange_t; /*SAS Initiator Device Status Change event ReasonCode values */ #define MPI2_EVENT_SAS_INIT_RC_ADDED (0x01) #define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02) /*SAS Initiator Device Table Overflow Event data */ typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW { U16 MaxInit; /*0x00 */ U16 CurrentInit; /*0x02 */ U64 SASAddress; /*0x04 */ } MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, *PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, Mpi2EventDataSasInitTableOverflow_t, *pMpi2EventDataSasInitTableOverflow_t; /*SAS Topology Change List Event data */ /* *Host code (drivers, BIOS, utilities, etc.) should leave this define set to *one and check NumEntries at runtime. */ #ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT #define MPI2_EVENT_SAS_TOPO_PHY_COUNT (1) #endif typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY { U16 AttachedDevHandle; /*0x00 */ U8 LinkRate; /*0x02 */ U8 PhyStatus; /*0x03 */ } MPI2_EVENT_SAS_TOPO_PHY_ENTRY, *PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY, Mpi2EventSasTopoPhyEntry_t, *pMpi2EventSasTopoPhyEntry_t; typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST { U16 EnclosureHandle; /*0x00 */ U16 ExpanderDevHandle; /*0x02 */ U8 NumPhys; /*0x04 */ U8 Reserved1; /*0x05 */ U16 Reserved2; /*0x06 */ U8 NumEntries; /*0x08 */ U8 StartPhyNum; /*0x09 */ U8 ExpStatus; /*0x0A */ U8 PhysicalPort; /*0x0B */ MPI2_EVENT_SAS_TOPO_PHY_ENTRY PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT]; /*0x0C */ } MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, *PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, Mpi2EventDataSasTopologyChangeList_t, *pMpi2EventDataSasTopologyChangeList_t; /*values for the ExpStatus field */ #define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00) #define MPI2_EVENT_SAS_TOPO_ES_ADDED (0x01) #define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02) #define MPI2_EVENT_SAS_TOPO_ES_RESPONDING (0x03) #define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04) /*defines for the LinkRate field */ #define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0) #define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4) #define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F) #define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT (0) #define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00) #define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01) #define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02) #define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03) #define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04) #define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05) #define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06) #define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5 (0x08) #define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09) #define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A) #define MPI25_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0B) #define MPI26_EVENT_SAS_TOPO_LR_RATE_22_5 (0x0C) /*values for the PhyStatus field */ #define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80) #define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE (0x10) /*values for the PhyStatus ReasonCode sub-field */ #define MPI2_EVENT_SAS_TOPO_RC_MASK (0x0F) #define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED (0x01) #define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING (0x02) #define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED (0x03) #define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE (0x04) #define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING (0x05) /*SAS Enclosure Device Status Change Event data */ typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE { U16 EnclosureHandle; /*0x00 */ U8 ReasonCode; /*0x02 */ U8 PhysicalPort; /*0x03 */ U64 EnclosureLogicalID; /*0x04 */ U16 NumSlots; /*0x0C */ U16 StartSlot; /*0x0E */ U32 PhyBits; /*0x10 */ } MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, *PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, Mpi2EventDataSasEnclDevStatusChange_t, *pMpi2EventDataSasEnclDevStatusChange_t, MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE, *PTR_MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE, Mpi26EventDataEnclDevStatusChange_t, *pMpi26EventDataEnclDevStatusChange_t; /*SAS Enclosure Device Status Change event ReasonCode values */ #define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01) #define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02) /*Enclosure Device Status Change event ReasonCode values */ #define MPI26_EVENT_ENCL_RC_ADDED (0x01) #define MPI26_EVENT_ENCL_RC_NOT_RESPONDING (0x02) typedef struct _MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR { U16 DevHandle; /*0x00 */ U8 ReasonCode; /*0x02 */ U8 PhysicalPort; /*0x03 */ U32 Reserved1[2]; /*0x04 */ U64 SASAddress; /*0x0C */ U32 Reserved2[2]; /*0x14 */ } MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR, *PTR_MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR, Mpi25EventDataSasDeviceDiscoveryError_t, *pMpi25EventDataSasDeviceDiscoveryError_t; /*SAS Device Discovery Error Event data ReasonCode values */ #define MPI25_EVENT_SAS_DISC_ERR_SMP_FAILED (0x01) #define MPI25_EVENT_SAS_DISC_ERR_SMP_TIMEOUT (0x02) /*SAS PHY Counter Event data */ typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER { U64 TimeStamp; /*0x00 */ U32 Reserved1; /*0x08 */ U8 PhyEventCode; /*0x0C */ U8 PhyNum; /*0x0D */ U16 Reserved2; /*0x0E */ U32 PhyEventInfo; /*0x10 */ U8 CounterType; /*0x14 */ U8 ThresholdWindow; /*0x15 */ U8 TimeUnits; /*0x16 */ U8 Reserved3; /*0x17 */ U32 EventThreshold; /*0x18 */ U16 ThresholdFlags; /*0x1C */ U16 Reserved4; /*0x1E */ } MPI2_EVENT_DATA_SAS_PHY_COUNTER, *PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER, Mpi2EventDataSasPhyCounter_t, *pMpi2EventDataSasPhyCounter_t; /*use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h *for the PhyEventCode field */ /*use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h *for the CounterType field */ /*use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h *for the TimeUnits field */ /*use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h *for the ThresholdFlags field */ /*SAS Quiesce Event data */ typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE { U8 ReasonCode; /*0x00 */ U8 Reserved1; /*0x01 */ U16 Reserved2; /*0x02 */ U32 Reserved3; /*0x04 */ } MPI2_EVENT_DATA_SAS_QUIESCE, *PTR_MPI2_EVENT_DATA_SAS_QUIESCE, Mpi2EventDataSasQuiesce_t, *pMpi2EventDataSasQuiesce_t; /*SAS Quiesce Event data ReasonCode values */ #define MPI2_EVENT_SAS_QUIESCE_RC_STARTED (0x01) #define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED (0x02) /*Host Based Discovery Phy Event data */ typedef struct _MPI2_EVENT_HBD_PHY_SAS { U8 Flags; /*0x00 */ U8 NegotiatedLinkRate; /*0x01 */ U8 PhyNum; /*0x02 */ U8 PhysicalPort; /*0x03 */ U32 Reserved1; /*0x04 */ U8 InitialFrame[28]; /*0x08 */ } MPI2_EVENT_HBD_PHY_SAS, *PTR_MPI2_EVENT_HBD_PHY_SAS, Mpi2EventHbdPhySas_t, *pMpi2EventHbdPhySas_t; /*values for the Flags field */ #define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID (0x02) #define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME (0x01) /*use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h *for the NegotiatedLinkRate field */ typedef union _MPI2_EVENT_HBD_DESCRIPTOR { MPI2_EVENT_HBD_PHY_SAS Sas; } MPI2_EVENT_HBD_DESCRIPTOR, *PTR_MPI2_EVENT_HBD_DESCRIPTOR, Mpi2EventHbdDescriptor_t, *pMpi2EventHbdDescriptor_t; typedef struct _MPI2_EVENT_DATA_HBD_PHY { U8 DescriptorType; /*0x00 */ U8 Reserved1; /*0x01 */ U16 Reserved2; /*0x02 */ U32 Reserved3; /*0x04 */ MPI2_EVENT_HBD_DESCRIPTOR Descriptor; /*0x08 */ } MPI2_EVENT_DATA_HBD_PHY, *PTR_MPI2_EVENT_DATA_HBD_PHY, Mpi2EventDataHbdPhy_t, *pMpi2EventDataMpi2EventDataHbdPhy_t; /*values for the DescriptorType field */ #define MPI2_EVENT_HBD_DT_SAS (0x01) /*PCIe Device Status Change Event data (MPI v2.6 and later) */ typedef struct _MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE { U16 TaskTag; /*0x00 */ U8 ReasonCode; /*0x02 */ U8 PhysicalPort; /*0x03 */ U8 ASC; /*0x04 */ U8 ASCQ; /*0x05 */ U16 DevHandle; /*0x06 */ U32 Reserved2; /*0x08 */ U64 WWID; /*0x0C */ U8 LUN[8]; /*0x14 */ } MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE, *PTR_MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE, Mpi26EventDataPCIeDeviceStatusChange_t, *pMpi26EventDataPCIeDeviceStatusChange_t; /*PCIe Device Status Change Event data ReasonCode values */ #define MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA (0x05) #define MPI26_EVENT_PCIDEV_STAT_RC_UNSUPPORTED (0x07) #define MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) #define MPI26_EVENT_PCIDEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) #define MPI26_EVENT_PCIDEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) #define MPI26_EVENT_PCIDEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) #define MPI26_EVENT_PCIDEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) #define MPI26_EVENT_PCIDEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) #define MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) #define MPI26_EVENT_PCIDEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) #define MPI26_EVENT_PCIDEV_STAT_RC_DEV_INIT_FAILURE (0x10) /*PCIe Enumeration Event data (MPI v2.6 and later) */ typedef struct _MPI26_EVENT_DATA_PCIE_ENUMERATION { U8 Flags; /*0x00 */ U8 ReasonCode; /*0x01 */ U8 PhysicalPort; /*0x02 */ U8 Reserved1; /*0x03 */ U32 EnumerationStatus; /*0x04 */ } MPI26_EVENT_DATA_PCIE_ENUMERATION, *PTR_MPI26_EVENT_DATA_PCIE_ENUMERATION, Mpi26EventDataPCIeEnumeration_t, *pMpi26EventDataPCIeEnumeration_t; /*PCIe Enumeration Event data Flags values */ #define MPI26_EVENT_PCIE_ENUM_DEVICE_CHANGE (0x02) #define MPI26_EVENT_PCIE_ENUM_IN_PROGRESS (0x01) /*PCIe Enumeration Event data ReasonCode values */ #define MPI26_EVENT_PCIE_ENUM_RC_STARTED (0x01) #define MPI26_EVENT_PCIE_ENUM_RC_COMPLETED (0x02) /*PCIe Enumeration Event data EnumerationStatus values */ #define MPI26_EVENT_PCIE_ENUM_ES_MAX_SWITCHES_EXCEED (0x40000000) #define MPI26_EVENT_PCIE_ENUM_ES_MAX_DEVICES_EXCEED (0x20000000) #define MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED (0x10000000) /*PCIe Topology Change List Event data (MPI v2.6 and later) */ /* *Host code (drivers, BIOS, utilities, etc.) should leave this define set to *one and check NumEntries at runtime. */ #ifndef MPI26_EVENT_PCIE_TOPO_PORT_COUNT #define MPI26_EVENT_PCIE_TOPO_PORT_COUNT (1) #endif typedef struct _MPI26_EVENT_PCIE_TOPO_PORT_ENTRY { U16 AttachedDevHandle; /*0x00 */ U8 PortStatus; /*0x02 */ U8 Reserved1; /*0x03 */ U8 CurrentPortInfo; /*0x04 */ U8 Reserved2; /*0x05 */ U8 PreviousPortInfo; /*0x06 */ U8 Reserved3; /*0x07 */ } MPI26_EVENT_PCIE_TOPO_PORT_ENTRY, *PTR_MPI26_EVENT_PCIE_TOPO_PORT_ENTRY, Mpi26EventPCIeTopoPortEntry_t, *pMpi26EventPCIeTopoPortEntry_t; /*PCIe Topology Change List Event data PortStatus values */ #define MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED (0x01) #define MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING (0x02) #define MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED (0x03) #define MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE (0x04) #define MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING (0x05) /*PCIe Topology Change List Event data defines for CurrentPortInfo and *PreviousPortInfo */ #define MPI26_EVENT_PCIE_TOPO_PI_LANE_MASK (0xF0) #define MPI26_EVENT_PCIE_TOPO_PI_LANES_UNKNOWN (0x00) #define MPI26_EVENT_PCIE_TOPO_PI_1_LANE (0x10) #define MPI26_EVENT_PCIE_TOPO_PI_2_LANES (0x20) #define MPI26_EVENT_PCIE_TOPO_PI_4_LANES (0x30) #define MPI26_EVENT_PCIE_TOPO_PI_8_LANES (0x40) #define MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK (0x0F) #define MPI26_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN (0x00) #define MPI26_EVENT_PCIE_TOPO_PI_RATE_DISABLED (0x01) #define MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5 (0x02) #define MPI26_EVENT_PCIE_TOPO_PI_RATE_5_0 (0x03) #define MPI26_EVENT_PCIE_TOPO_PI_RATE_8_0 (0x04) #define MPI26_EVENT_PCIE_TOPO_PI_RATE_16_0 (0x05) typedef struct _MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST { U16 EnclosureHandle; /*0x00 */ U16 SwitchDevHandle; /*0x02 */ U8 NumPorts; /*0x04 */ U8 Reserved1; /*0x05 */ U16 Reserved2; /*0x06 */ U8 NumEntries; /*0x08 */ U8 StartPortNum; /*0x09 */ U8 SwitchStatus; /*0x0A */ U8 PhysicalPort; /*0x0B */ MPI26_EVENT_PCIE_TOPO_PORT_ENTRY PortEntry[MPI26_EVENT_PCIE_TOPO_PORT_COUNT]; /*0x0C */ } MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, *PTR_MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, Mpi26EventDataPCIeTopologyChangeList_t, *pMpi26EventDataPCIeTopologyChangeList_t; /*PCIe Topology Change List Event data SwitchStatus values */ #define MPI26_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH (0x00) #define MPI26_EVENT_PCIE_TOPO_SS_ADDED (0x01) #define MPI26_EVENT_PCIE_TOPO_SS_NOT_RESPONDING (0x02) #define MPI26_EVENT_PCIE_TOPO_SS_RESPONDING (0x03) #define MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING (0x04) /*PCIe Link Counter Event data (MPI v2.6 and later) */ typedef struct _MPI26_EVENT_DATA_PCIE_LINK_COUNTER { U64 TimeStamp; /*0x00 */ U32 Reserved1; /*0x08 */ U8 LinkEventCode; /*0x0C */ U8 LinkNum; /*0x0D */ U16 Reserved2; /*0x0E */ U32 LinkEventInfo; /*0x10 */ U8 CounterType; /*0x14 */ U8 ThresholdWindow; /*0x15 */ U8 TimeUnits; /*0x16 */ U8 Reserved3; /*0x17 */ U32 EventThreshold; /*0x18 */ U16 ThresholdFlags; /*0x1C */ U16 Reserved4; /*0x1E */ } MPI26_EVENT_DATA_PCIE_LINK_COUNTER, *PTR_MPI26_EVENT_DATA_PCIE_LINK_COUNTER, Mpi26EventDataPcieLinkCounter_t, *pMpi26EventDataPcieLinkCounter_t; /*use MPI26_PCIELINK3_EVTCODE_ values from mpi2_cnfg.h for the LinkEventCode *field */ /*use MPI26_PCIELINK3_COUNTER_TYPE_ values from mpi2_cnfg.h for the CounterType *field */ /*use MPI26_PCIELINK3_TIME_UNITS_ values from mpi2_cnfg.h for the TimeUnits *field */ /*use MPI26_PCIELINK3_TFLAGS_ values from mpi2_cnfg.h for the ThresholdFlags *field */ /**************************************************************************** * EventAck message ****************************************************************************/ /*EventAck Request message */ typedef struct _MPI2_EVENT_ACK_REQUEST { U16 Reserved1; /*0x00 */ U8 ChainOffset; /*0x02 */ U8 Function; /*0x03 */ U16 Reserved2; /*0x04 */ U8 Reserved3; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved4; /*0x0A */ U16 Event; /*0x0C */ U16 Reserved5; /*0x0E */ U32 EventContext; /*0x10 */ } MPI2_EVENT_ACK_REQUEST, *PTR_MPI2_EVENT_ACK_REQUEST, Mpi2EventAckRequest_t, *pMpi2EventAckRequest_t; /*EventAck Reply message */ typedef struct _MPI2_EVENT_ACK_REPLY { U16 Reserved1; /*0x00 */ U8 MsgLength; /*0x02 */ U8 Function; /*0x03 */ U16 Reserved2; /*0x04 */ U8 Reserved3; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved4; /*0x0A */ U16 Reserved5; /*0x0C */ U16 IOCStatus; /*0x0E */ U32 IOCLogInfo; /*0x10 */ } MPI2_EVENT_ACK_REPLY, *PTR_MPI2_EVENT_ACK_REPLY, Mpi2EventAckReply_t, *pMpi2EventAckReply_t; /**************************************************************************** * SendHostMessage message ****************************************************************************/ /*SendHostMessage Request message */ typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST { U16 HostDataLength; /*0x00 */ U8 ChainOffset; /*0x02 */ U8 Function; /*0x03 */ U16 Reserved1; /*0x04 */ U8 Reserved2; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved3; /*0x0A */ U8 Reserved4; /*0x0C */ U8 DestVF_ID; /*0x0D */ U16 Reserved5; /*0x0E */ U32 Reserved6; /*0x10 */ U32 Reserved7; /*0x14 */ U32 Reserved8; /*0x18 */ U32 Reserved9; /*0x1C */ U32 Reserved10; /*0x20 */ U32 HostData[1]; /*0x24 */ } MPI2_SEND_HOST_MESSAGE_REQUEST, *PTR_MPI2_SEND_HOST_MESSAGE_REQUEST, Mpi2SendHostMessageRequest_t, *pMpi2SendHostMessageRequest_t; /*SendHostMessage Reply message */ typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY { U16 HostDataLength; /*0x00 */ U8 MsgLength; /*0x02 */ U8 Function; /*0x03 */ U16 Reserved1; /*0x04 */ U8 Reserved2; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved3; /*0x0A */ U16 Reserved4; /*0x0C */ U16 IOCStatus; /*0x0E */ U32 IOCLogInfo; /*0x10 */ } MPI2_SEND_HOST_MESSAGE_REPLY, *PTR_MPI2_SEND_HOST_MESSAGE_REPLY, Mpi2SendHostMessageReply_t, *pMpi2SendHostMessageReply_t; /**************************************************************************** * FWDownload message ****************************************************************************/ /*MPI v2.0 FWDownload Request message */ typedef struct _MPI2_FW_DOWNLOAD_REQUEST { U8 ImageType; /*0x00 */ U8 Reserved1; /*0x01 */ U8 ChainOffset; /*0x02 */ U8 Function; /*0x03 */ U16 Reserved2; /*0x04 */ U8 Reserved3; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved4; /*0x0A */ U32 TotalImageSize; /*0x0C */ U32 Reserved5; /*0x10 */ MPI2_MPI_SGE_UNION SGL; /*0x14 */ } MPI2_FW_DOWNLOAD_REQUEST, *PTR_MPI2_FW_DOWNLOAD_REQUEST, Mpi2FWDownloadRequest, *pMpi2FWDownloadRequest; #define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT (0x01) #define MPI2_FW_DOWNLOAD_ITYPE_FW (0x01) #define MPI2_FW_DOWNLOAD_ITYPE_BIOS (0x02) #define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06) #define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07) #define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08) #define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09) #define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A) #define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) #define MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY (0x0C) #define MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP (0x0D) #define MPI2_FW_DOWNLOAD_ITYPE_SBR (0x0E) #define MPI2_FW_DOWNLOAD_ITYPE_SBR_BACKUP (0x0F) #define MPI2_FW_DOWNLOAD_ITYPE_HIIM (0x10) #define MPI2_FW_DOWNLOAD_ITYPE_HIIA (0x11) #define MPI2_FW_DOWNLOAD_ITYPE_CTLR (0x12) #define MPI2_FW_DOWNLOAD_ITYPE_IMR_FIRMWARE (0x13) #define MPI2_FW_DOWNLOAD_ITYPE_MR_NVDATA (0x14) #define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0) /*MPI v2.0 FWDownload TransactionContext Element */ typedef struct _MPI2_FW_DOWNLOAD_TCSGE { U8 Reserved1; /*0x00 */ U8 ContextSize; /*0x01 */ U8 DetailsLength; /*0x02 */ U8 Flags; /*0x03 */ U32 Reserved2; /*0x04 */ U32 ImageOffset; /*0x08 */ U32 ImageSize; /*0x0C */ } MPI2_FW_DOWNLOAD_TCSGE, *PTR_MPI2_FW_DOWNLOAD_TCSGE, Mpi2FWDownloadTCSGE_t, *pMpi2FWDownloadTCSGE_t; /*MPI v2.5 FWDownload Request message */ typedef struct _MPI25_FW_DOWNLOAD_REQUEST { U8 ImageType; /*0x00 */ U8 Reserved1; /*0x01 */ U8 ChainOffset; /*0x02 */ U8 Function; /*0x03 */ U16 Reserved2; /*0x04 */ U8 Reserved3; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved4; /*0x0A */ U32 TotalImageSize; /*0x0C */ U32 Reserved5; /*0x10 */ U32 Reserved6; /*0x14 */ U32 ImageOffset; /*0x18 */ U32 ImageSize; /*0x1C */ MPI25_SGE_IO_UNION SGL; /*0x20 */ } MPI25_FW_DOWNLOAD_REQUEST, *PTR_MPI25_FW_DOWNLOAD_REQUEST, Mpi25FWDownloadRequest, *pMpi25FWDownloadRequest; /*FWDownload Reply message */ typedef struct _MPI2_FW_DOWNLOAD_REPLY { U8 ImageType; /*0x00 */ U8 Reserved1; /*0x01 */ U8 MsgLength; /*0x02 */ U8 Function; /*0x03 */ U16 Reserved2; /*0x04 */ U8 Reserved3; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved4; /*0x0A */ U16 Reserved5; /*0x0C */ U16 IOCStatus; /*0x0E */ U32 IOCLogInfo; /*0x10 */ } MPI2_FW_DOWNLOAD_REPLY, *PTR_MPI2_FW_DOWNLOAD_REPLY, Mpi2FWDownloadReply_t, *pMpi2FWDownloadReply_t; /**************************************************************************** * FWUpload message ****************************************************************************/ /*MPI v2.0 FWUpload Request message */ typedef struct _MPI2_FW_UPLOAD_REQUEST { U8 ImageType; /*0x00 */ U8 Reserved1; /*0x01 */ U8 ChainOffset; /*0x02 */ U8 Function; /*0x03 */ U16 Reserved2; /*0x04 */ U8 Reserved3; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved4; /*0x0A */ U32 Reserved5; /*0x0C */ U32 Reserved6; /*0x10 */ MPI2_MPI_SGE_UNION SGL; /*0x14 */ } MPI2_FW_UPLOAD_REQUEST, *PTR_MPI2_FW_UPLOAD_REQUEST, Mpi2FWUploadRequest_t, *pMpi2FWUploadRequest_t; #define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT (0x00) #define MPI2_FW_UPLOAD_ITYPE_FW_FLASH (0x01) #define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02) #define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP (0x05) #define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING (0x06) #define MPI2_FW_UPLOAD_ITYPE_CONFIG_1 (0x07) #define MPI2_FW_UPLOAD_ITYPE_CONFIG_2 (0x08) #define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09) #define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A) #define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) #define MPI2_FW_UPLOAD_ITYPE_CBB_BACKUP (0x0D) #define MPI2_FW_UPLOAD_ITYPE_SBR (0x0E) #define MPI2_FW_UPLOAD_ITYPE_SBR_BACKUP (0x0F) #define MPI2_FW_UPLOAD_ITYPE_HIIM (0x10) #define MPI2_FW_UPLOAD_ITYPE_HIIA (0x11) #define MPI2_FW_UPLOAD_ITYPE_CTLR (0x12) #define MPI2_FW_UPLOAD_ITYPE_IMR_FIRMWARE (0x13) #define MPI2_FW_UPLOAD_ITYPE_MR_NVDATA (0x14) /*MPI v2.0 FWUpload TransactionContext Element */ typedef struct _MPI2_FW_UPLOAD_TCSGE { U8 Reserved1; /*0x00 */ U8 ContextSize; /*0x01 */ U8 DetailsLength; /*0x02 */ U8 Flags; /*0x03 */ U32 Reserved2; /*0x04 */ U32 ImageOffset; /*0x08 */ U32 ImageSize; /*0x0C */ } MPI2_FW_UPLOAD_TCSGE, *PTR_MPI2_FW_UPLOAD_TCSGE, Mpi2FWUploadTCSGE_t, *pMpi2FWUploadTCSGE_t; /*MPI v2.5 FWUpload Request message */ typedef struct _MPI25_FW_UPLOAD_REQUEST { U8 ImageType; /*0x00 */ U8 Reserved1; /*0x01 */ U8 ChainOffset; /*0x02 */ U8 Function; /*0x03 */ U16 Reserved2; /*0x04 */ U8 Reserved3; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved4; /*0x0A */ U32 Reserved5; /*0x0C */ U32 Reserved6; /*0x10 */ U32 Reserved7; /*0x14 */ U32 ImageOffset; /*0x18 */ U32 ImageSize; /*0x1C */ MPI25_SGE_IO_UNION SGL; /*0x20 */ } MPI25_FW_UPLOAD_REQUEST, *PTR_MPI25_FW_UPLOAD_REQUEST, Mpi25FWUploadRequest_t, *pMpi25FWUploadRequest_t; /*FWUpload Reply message */ typedef struct _MPI2_FW_UPLOAD_REPLY { U8 ImageType; /*0x00 */ U8 Reserved1; /*0x01 */ U8 MsgLength; /*0x02 */ U8 Function; /*0x03 */ U16 Reserved2; /*0x04 */ U8 Reserved3; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved4; /*0x0A */ U16 Reserved5; /*0x0C */ U16 IOCStatus; /*0x0E */ U32 IOCLogInfo; /*0x10 */ U32 ActualImageSize; /*0x14 */ } MPI2_FW_UPLOAD_REPLY, *PTR_MPI2_FW_UPLOAD_REPLY, Mpi2FWUploadReply_t, *pMPi2FWUploadReply_t; /*FW Image Header */ typedef struct _MPI2_FW_IMAGE_HEADER { U32 Signature; /*0x00 */ U32 Signature0; /*0x04 */ U32 Signature1; /*0x08 */ U32 Signature2; /*0x0C */ MPI2_VERSION_UNION MPIVersion; /*0x10 */ MPI2_VERSION_UNION FWVersion; /*0x14 */ MPI2_VERSION_UNION NVDATAVersion; /*0x18 */ MPI2_VERSION_UNION PackageVersion; /*0x1C */ U16 VendorID; /*0x20 */ U16 ProductID; /*0x22 */ U16 ProtocolFlags; /*0x24 */ U16 Reserved26; /*0x26 */ U32 IOCCapabilities; /*0x28 */ U32 ImageSize; /*0x2C */ U32 NextImageHeaderOffset; /*0x30 */ U32 Checksum; /*0x34 */ U32 Reserved38; /*0x38 */ U32 Reserved3C; /*0x3C */ U32 Reserved40; /*0x40 */ U32 Reserved44; /*0x44 */ U32 Reserved48; /*0x48 */ U32 Reserved4C; /*0x4C */ U32 Reserved50; /*0x50 */ U32 Reserved54; /*0x54 */ U32 Reserved58; /*0x58 */ U32 Reserved5C; /*0x5C */ U32 BootFlags; /*0x60 */ U32 FirmwareVersionNameWhat; /*0x64 */ U8 FirmwareVersionName[32]; /*0x68 */ U32 VendorNameWhat; /*0x88 */ U8 VendorName[32]; /*0x8C */ U32 PackageNameWhat; /*0x88 */ U8 PackageName[32]; /*0x8C */ U32 ReservedD0; /*0xD0 */ U32 ReservedD4; /*0xD4 */ U32 ReservedD8; /*0xD8 */ U32 ReservedDC; /*0xDC */ U32 ReservedE0; /*0xE0 */ U32 ReservedE4; /*0xE4 */ U32 ReservedE8; /*0xE8 */ U32 ReservedEC; /*0xEC */ U32 ReservedF0; /*0xF0 */ U32 ReservedF4; /*0xF4 */ U32 ReservedF8; /*0xF8 */ U32 ReservedFC; /*0xFC */ } MPI2_FW_IMAGE_HEADER, *PTR_MPI2_FW_IMAGE_HEADER, Mpi2FWImageHeader_t, *pMpi2FWImageHeader_t; /*Signature field */ #define MPI2_FW_HEADER_SIGNATURE_OFFSET (0x00) #define MPI2_FW_HEADER_SIGNATURE_MASK (0xFF000000) #define MPI2_FW_HEADER_SIGNATURE (0xEA000000) #define MPI26_FW_HEADER_SIGNATURE (0xEB000000) /*Signature0 field */ #define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04) #define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A) /* Last byte is defined by architecture */ #define MPI26_FW_HEADER_SIGNATURE0_BASE (0x5AEAA500) #define MPI26_FW_HEADER_SIGNATURE0_ARC_0 (0x5A) #define MPI26_FW_HEADER_SIGNATURE0_ARC_1 (0x00) #define MPI26_FW_HEADER_SIGNATURE0_ARC_2 (0x01) /* legacy (0x5AEAA55A) */ #define MPI26_FW_HEADER_SIGNATURE0_ARC_3 (0x02) #define MPI26_FW_HEADER_SIGNATURE0 \ (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_0) #define MPI26_FW_HEADER_SIGNATURE0_3516 \ (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_1) #define MPI26_FW_HEADER_SIGNATURE0_4008 \ (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_3) /*Signature1 field */ #define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08) #define MPI2_FW_HEADER_SIGNATURE1 (0xA55AFAA5) #define MPI26_FW_HEADER_SIGNATURE1 (0xA55AEAA5) /*Signature2 field */ #define MPI2_FW_HEADER_SIGNATURE2_OFFSET (0x0C) #define MPI2_FW_HEADER_SIGNATURE2 (0x5AA55AFA) #define MPI26_FW_HEADER_SIGNATURE2 (0x5AA55AEA) /*defines for using the ProductID field */ #define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000) #define MPI2_FW_HEADER_PID_TYPE_SAS (0x2000) #define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00) #define MPI2_FW_HEADER_PID_PROD_A (0x0000) #define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200) #define MPI2_FW_HEADER_PID_PROD_IR_SCSI (0x0700) #define MPI2_FW_HEADER_PID_FAMILY_MASK (0x00FF) /*SAS ProductID Family bits */ #define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0013) #define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0014) #define MPI25_FW_HEADER_PID_FAMILY_3108_SAS (0x0021) #define MPI26_FW_HEADER_PID_FAMILY_3324_SAS (0x0028) #define MPI26_FW_HEADER_PID_FAMILY_3516_SAS (0x0031) /*use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */ /*use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */ #define MPI2_FW_HEADER_IMAGESIZE_OFFSET (0x2C) #define MPI2_FW_HEADER_NEXTIMAGE_OFFSET (0x30) #define MPI26_FW_HEADER_BOOTFLAGS_OFFSET (0x60) #define MPI2_FW_HEADER_VERNMHWAT_OFFSET (0x64) #define MPI2_FW_HEADER_WHAT_SIGNATURE (0x29232840) #define MPI2_FW_HEADER_SIZE (0x100) /*Extended Image Header */ typedef struct _MPI2_EXT_IMAGE_HEADER { U8 ImageType; /*0x00 */ U8 Reserved1; /*0x01 */ U16 Reserved2; /*0x02 */ U32 Checksum; /*0x04 */ U32 ImageSize; /*0x08 */ U32 NextImageHeaderOffset; /*0x0C */ U32 PackageVersion; /*0x10 */ U32 Reserved3; /*0x14 */ U32 Reserved4; /*0x18 */ U32 Reserved5; /*0x1C */ U8 IdentifyString[32]; /*0x20 */ } MPI2_EXT_IMAGE_HEADER, *PTR_MPI2_EXT_IMAGE_HEADER, Mpi2ExtImageHeader_t, *pMpi2ExtImageHeader_t; /*useful offsets */ #define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET (0x00) #define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET (0x08) #define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0C) #define MPI2_EXT_IMAGE_HEADER_SIZE (0x40) /*defines for the ImageType field */ #define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00) #define MPI2_EXT_IMAGE_TYPE_FW (0x01) #define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03) #define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04) #define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05) #define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06) #define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07) #define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08) #define MPI2_EXT_IMAGE_TYPE_ENCRYPTED_HASH (0x09) #define MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80) #define MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xFF) #define MPI2_EXT_IMAGE_TYPE_MAX (MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC) /*FLASH Layout Extended Image Data */ /* *Host code (drivers, BIOS, utilities, etc.) should leave this define set to *one and check RegionsPerLayout at runtime. */ #ifndef MPI2_FLASH_NUMBER_OF_REGIONS #define MPI2_FLASH_NUMBER_OF_REGIONS (1) #endif /* *Host code (drivers, BIOS, utilities, etc.) should leave this define set to *one and check NumberOfLayouts at runtime. */ #ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS #define MPI2_FLASH_NUMBER_OF_LAYOUTS (1) #endif typedef struct _MPI2_FLASH_REGION { U8 RegionType; /*0x00 */ U8 Reserved1; /*0x01 */ U16 Reserved2; /*0x02 */ U32 RegionOffset; /*0x04 */ U32 RegionSize; /*0x08 */ U32 Reserved3; /*0x0C */ } MPI2_FLASH_REGION, *PTR_MPI2_FLASH_REGION, Mpi2FlashRegion_t, *pMpi2FlashRegion_t; typedef struct _MPI2_FLASH_LAYOUT { U32 FlashSize; /*0x00 */ U32 Reserved1; /*0x04 */ U32 Reserved2; /*0x08 */ U32 Reserved3; /*0x0C */ MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS]; /*0x10 */ } MPI2_FLASH_LAYOUT, *PTR_MPI2_FLASH_LAYOUT, Mpi2FlashLayout_t, *pMpi2FlashLayout_t; typedef struct _MPI2_FLASH_LAYOUT_DATA { U8 ImageRevision; /*0x00 */ U8 Reserved1; /*0x01 */ U8 SizeOfRegion; /*0x02 */ U8 Reserved2; /*0x03 */ U16 NumberOfLayouts; /*0x04 */ U16 RegionsPerLayout; /*0x06 */ U16 MinimumSectorAlignment; /*0x08 */ U16 Reserved3; /*0x0A */ U32 Reserved4; /*0x0C */ MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS]; /*0x10 */ } MPI2_FLASH_LAYOUT_DATA, *PTR_MPI2_FLASH_LAYOUT_DATA, Mpi2FlashLayoutData_t, *pMpi2FlashLayoutData_t; /*defines for the RegionType field */ #define MPI2_FLASH_REGION_UNUSED (0x00) #define MPI2_FLASH_REGION_FIRMWARE (0x01) #define MPI2_FLASH_REGION_BIOS (0x02) #define MPI2_FLASH_REGION_NVDATA (0x03) #define MPI2_FLASH_REGION_FIRMWARE_BACKUP (0x05) #define MPI2_FLASH_REGION_MFG_INFORMATION (0x06) #define MPI2_FLASH_REGION_CONFIG_1 (0x07) #define MPI2_FLASH_REGION_CONFIG_2 (0x08) #define MPI2_FLASH_REGION_MEGARAID (0x09) #define MPI2_FLASH_REGION_COMMON_BOOT_BLOCK (0x0A) #define MPI2_FLASH_REGION_INIT (MPI2_FLASH_REGION_COMMON_BOOT_BLOCK) #define MPI2_FLASH_REGION_CBB_BACKUP (0x0D) #define MPI2_FLASH_REGION_SBR (0x0E) #define MPI2_FLASH_REGION_SBR_BACKUP (0x0F) #define MPI2_FLASH_REGION_HIIM (0x10) #define MPI2_FLASH_REGION_HIIA (0x11) #define MPI2_FLASH_REGION_CTLR (0x12) #define MPI2_FLASH_REGION_IMR_FIRMWARE (0x13) #define MPI2_FLASH_REGION_MR_NVDATA (0x14) /*ImageRevision */ #define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00) /*Supported Devices Extended Image Data */ /* *Host code (drivers, BIOS, utilities, etc.) should leave this define set to *one and check NumberOfDevices at runtime. */ #ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES #define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES (1) #endif typedef struct _MPI2_SUPPORTED_DEVICE { U16 DeviceID; /*0x00 */ U16 VendorID; /*0x02 */ U16 DeviceIDMask; /*0x04 */ U16 Reserved1; /*0x06 */ U8 LowPCIRev; /*0x08 */ U8 HighPCIRev; /*0x09 */ U16 Reserved2; /*0x0A */ U32 Reserved3; /*0x0C */ } MPI2_SUPPORTED_DEVICE, *PTR_MPI2_SUPPORTED_DEVICE, Mpi2SupportedDevice_t, *pMpi2SupportedDevice_t; typedef struct _MPI2_SUPPORTED_DEVICES_DATA { U8 ImageRevision; /*0x00 */ U8 Reserved1; /*0x01 */ U8 NumberOfDevices; /*0x02 */ U8 Reserved2; /*0x03 */ U32 Reserved3; /*0x04 */ MPI2_SUPPORTED_DEVICE SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES];/*0x08 */ } MPI2_SUPPORTED_DEVICES_DATA, *PTR_MPI2_SUPPORTED_DEVICES_DATA, Mpi2SupportedDevicesData_t, *pMpi2SupportedDevicesData_t; /*ImageRevision */ #define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION (0x00) /*Init Extended Image Data */ typedef struct _MPI2_INIT_IMAGE_FOOTER { U32 BootFlags; /*0x00 */ U32 ImageSize; /*0x04 */ U32 Signature0; /*0x08 */ U32 Signature1; /*0x0C */ U32 Signature2; /*0x10 */ U32 ResetVector; /*0x14 */ } MPI2_INIT_IMAGE_FOOTER, *PTR_MPI2_INIT_IMAGE_FOOTER, Mpi2InitImageFooter_t, *pMpi2InitImageFooter_t; /*defines for the BootFlags field */ #define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET (0x00) /*defines for the ImageSize field */ #define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET (0x04) /*defines for the Signature0 field */ #define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET (0x08) #define MPI2_INIT_IMAGE_SIGNATURE0 (0x5AA55AEA) /*defines for the Signature1 field */ #define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET (0x0C) #define MPI2_INIT_IMAGE_SIGNATURE1 (0xA55AEAA5) /*defines for the Signature2 field */ #define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET (0x10) #define MPI2_INIT_IMAGE_SIGNATURE2 (0x5AEAA55A) /*Signature fields as individual bytes */ #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0 (0xEA) #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1 (0x5A) #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2 (0xA5) #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3 (0x5A) #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4 (0xA5) #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5 (0xEA) #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6 (0x5A) #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7 (0xA5) #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8 (0x5A) #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9 (0xA5) #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A (0xEA) #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B (0x5A) /*defines for the ResetVector field */ #define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET (0x14) /* Encrypted Hash Extended Image Data */ typedef struct _MPI25_ENCRYPTED_HASH_ENTRY { U8 HashImageType; /* 0x00 */ U8 HashAlgorithm; /* 0x01 */ U8 EncryptionAlgorithm; /* 0x02 */ U8 Reserved1; /* 0x03 */ U32 Reserved2; /* 0x04 */ U32 EncryptedHash[1]; /* 0x08 */ /* variable length */ } MPI25_ENCRYPTED_HASH_ENTRY, *PTR_MPI25_ENCRYPTED_HASH_ENTRY, Mpi25EncryptedHashEntry_t, *pMpi25EncryptedHashEntry_t; /* values for HashImageType */ #define MPI25_HASH_IMAGE_TYPE_UNUSED (0x00) #define MPI25_HASH_IMAGE_TYPE_FIRMWARE (0x01) #define MPI25_HASH_IMAGE_TYPE_BIOS (0x02) /* values for HashAlgorithm */ #define MPI25_HASH_ALGORITHM_UNUSED (0x00) #define MPI25_HASH_ALGORITHM_SHA256 (0x01) /* values for EncryptionAlgorithm */ #define MPI25_ENCRYPTION_ALG_UNUSED (0x00) #define MPI25_ENCRYPTION_ALG_RSA256 (0x01) typedef struct _MPI25_ENCRYPTED_HASH_DATA { U8 ImageVersion; /* 0x00 */ U8 NumHash; /* 0x01 */ U16 Reserved1; /* 0x02 */ U32 Reserved2; /* 0x04 */ MPI25_ENCRYPTED_HASH_ENTRY EncryptedHashEntry[1]; /* 0x08 */ } MPI25_ENCRYPTED_HASH_DATA, *PTR_MPI25_ENCRYPTED_HASH_DATA, Mpi25EncryptedHashData_t, *pMpi25EncryptedHashData_t; /**************************************************************************** * PowerManagementControl message ****************************************************************************/ /*PowerManagementControl Request message */ typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST { U8 Feature; /*0x00 */ U8 Reserved1; /*0x01 */ U8 ChainOffset; /*0x02 */ U8 Function; /*0x03 */ U16 Reserved2; /*0x04 */ U8 Reserved3; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved4; /*0x0A */ U8 Parameter1; /*0x0C */ U8 Parameter2; /*0x0D */ U8 Parameter3; /*0x0E */ U8 Parameter4; /*0x0F */ U32 Reserved5; /*0x10 */ U32 Reserved6; /*0x14 */ } MPI2_PWR_MGMT_CONTROL_REQUEST, *PTR_MPI2_PWR_MGMT_CONTROL_REQUEST, Mpi2PwrMgmtControlRequest_t, *pMpi2PwrMgmtControlRequest_t; /*defines for the Feature field */ #define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND (0x01) #define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION (0x02) #define MPI2_PM_CONTROL_FEATURE_PCIE_LINK (0x03) /*obsolete */ #define MPI2_PM_CONTROL_FEATURE_IOC_SPEED (0x04) #define MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE (0x05) #define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC (0x80) #define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC (0xFF) /*parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */ /*Parameter1 contains a PHY number */ /*Parameter2 indicates power condition action using these defines */ #define MPI2_PM_CONTROL_PARAM2_PARTIAL (0x01) #define MPI2_PM_CONTROL_PARAM2_SLUMBER (0x02) #define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT (0x03) /*Parameter3 and Parameter4 are reserved */ /*parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION * Feature */ /*Parameter1 contains SAS port width modulation group number */ /*Parameter2 indicates IOC action using these defines */ #define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP (0x01) #define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION (0x02) #define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP (0x03) /*Parameter3 indicates desired modulation level using these defines */ #define MPI2_PM_CONTROL_PARAM3_25_PERCENT (0x00) #define MPI2_PM_CONTROL_PARAM3_50_PERCENT (0x01) #define MPI2_PM_CONTROL_PARAM3_75_PERCENT (0x02) #define MPI2_PM_CONTROL_PARAM3_100_PERCENT (0x03) /*Parameter4 is reserved */ /*this next set (_PCIE_LINK) is obsolete */ /*parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */ /*Parameter1 indicates desired PCIe link speed using these defines */ #define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS (0x00) /*obsolete */ #define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS (0x01) /*obsolete */ #define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS (0x02) /*obsolete */ /*Parameter2 indicates desired PCIe link width using these defines */ #define MPI2_PM_CONTROL_PARAM2_WIDTH_X1 (0x01) /*obsolete */ #define MPI2_PM_CONTROL_PARAM2_WIDTH_X2 (0x02) /*obsolete */ #define MPI2_PM_CONTROL_PARAM2_WIDTH_X4 (0x04) /*obsolete */ #define MPI2_PM_CONTROL_PARAM2_WIDTH_X8 (0x08) /*obsolete */ /*Parameter3 and Parameter4 are reserved */ /*parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */ /*Parameter1 indicates desired IOC hardware clock speed using these defines */ #define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED (0x01) #define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED (0x02) #define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED (0x04) #define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED (0x08) /*Parameter2, Parameter3, and Parameter4 are reserved */ /*parameter usage for the MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE Feature*/ /*Parameter1 indicates host action regarding global power management mode */ #define MPI2_PM_CONTROL_PARAM1_TAKE_CONTROL (0x01) #define MPI2_PM_CONTROL_PARAM1_CHANGE_GLOBAL_MODE (0x02) #define MPI2_PM_CONTROL_PARAM1_RELEASE_CONTROL (0x03) /*Parameter2 indicates the requested global power management mode */ #define MPI2_PM_CONTROL_PARAM2_FULL_PWR_PERF (0x01) #define MPI2_PM_CONTROL_PARAM2_REDUCED_PWR_PERF (0x08) #define MPI2_PM_CONTROL_PARAM2_STANDBY (0x40) /*Parameter3 and Parameter4 are reserved */ /*PowerManagementControl Reply message */ typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY { U8 Feature; /*0x00 */ U8 Reserved1; /*0x01 */ U8 MsgLength; /*0x02 */ U8 Function; /*0x03 */ U16 Reserved2; /*0x04 */ U8 Reserved3; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved4; /*0x0A */ U16 Reserved5; /*0x0C */ U16 IOCStatus; /*0x0E */ U32 IOCLogInfo; /*0x10 */ } MPI2_PWR_MGMT_CONTROL_REPLY, *PTR_MPI2_PWR_MGMT_CONTROL_REPLY, Mpi2PwrMgmtControlReply_t, *pMpi2PwrMgmtControlReply_t; /**************************************************************************** * IO Unit Control messages (MPI v2.6 and later only.) ****************************************************************************/ /* IO Unit Control Request Message */ typedef struct _MPI26_IOUNIT_CONTROL_REQUEST { U8 Operation; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U16 DevHandle; /* 0x04 */ U8 IOCParameter; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved3; /* 0x0A */ U16 Reserved4; /* 0x0C */ U8 PhyNum; /* 0x0E */ U8 PrimFlags; /* 0x0F */ U32 Primitive; /* 0x10 */ U8 LookupMethod; /* 0x14 */ U8 Reserved5; /* 0x15 */ U16 SlotNumber; /* 0x16 */ U64 LookupAddress; /* 0x18 */ U32 IOCParameterValue; /* 0x20 */ U32 Reserved7; /* 0x24 */ U32 Reserved8; /* 0x28 */ } MPI26_IOUNIT_CONTROL_REQUEST, *PTR_MPI26_IOUNIT_CONTROL_REQUEST, Mpi26IoUnitControlRequest_t, *pMpi26IoUnitControlRequest_t; /* values for the Operation field */ #define MPI26_CTRL_OP_CLEAR_ALL_PERSISTENT (0x02) #define MPI26_CTRL_OP_SAS_PHY_LINK_RESET (0x06) #define MPI26_CTRL_OP_SAS_PHY_HARD_RESET (0x07) #define MPI26_CTRL_OP_PHY_CLEAR_ERROR_LOG (0x08) #define MPI26_CTRL_OP_LINK_CLEAR_ERROR_LOG (0x09) #define MPI26_CTRL_OP_SAS_SEND_PRIMITIVE (0x0A) #define MPI26_CTRL_OP_FORCE_FULL_DISCOVERY (0x0B) #define MPI26_CTRL_OP_REMOVE_DEVICE (0x0D) #define MPI26_CTRL_OP_LOOKUP_MAPPING (0x0E) #define MPI26_CTRL_OP_SET_IOC_PARAMETER (0x0F) #define MPI26_CTRL_OP_ENABLE_FP_DEVICE (0x10) #define MPI26_CTRL_OP_DISABLE_FP_DEVICE (0x11) #define MPI26_CTRL_OP_ENABLE_FP_ALL (0x12) #define MPI26_CTRL_OP_DISABLE_FP_ALL (0x13) #define MPI26_CTRL_OP_DEV_ENABLE_NCQ (0x14) #define MPI26_CTRL_OP_DEV_DISABLE_NCQ (0x15) #define MPI26_CTRL_OP_SHUTDOWN (0x16) #define MPI26_CTRL_OP_DEV_ENABLE_PERSIST_CONNECTION (0x17) #define MPI26_CTRL_OP_DEV_DISABLE_PERSIST_CONNECTION (0x18) #define MPI26_CTRL_OP_DEV_CLOSE_PERSIST_CONNECTION (0x19) #define MPI26_CTRL_OP_ENABLE_NVME_SGL_FORMAT (0x1A) #define MPI26_CTRL_OP_DISABLE_NVME_SGL_FORMAT (0x1B) #define MPI26_CTRL_OP_PRODUCT_SPECIFIC_MIN (0x80) /* values for the PrimFlags field */ #define MPI26_CTRL_PRIMFLAGS_SINGLE (0x08) #define MPI26_CTRL_PRIMFLAGS_TRIPLE (0x02) #define MPI26_CTRL_PRIMFLAGS_REDUNDANT (0x01) /* values for the LookupMethod field */ #define MPI26_CTRL_LOOKUP_METHOD_WWID_ADDRESS (0x01) #define MPI26_CTRL_LOOKUP_METHOD_ENCLOSURE_SLOT (0x02) #define MPI26_CTRL_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03) /* IO Unit Control Reply Message */ typedef struct _MPI26_IOUNIT_CONTROL_REPLY { U8 Operation; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 MsgLength; /* 0x02 */ U8 Function; /* 0x03 */ U16 DevHandle; /* 0x04 */ U8 IOCParameter; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved3; /* 0x0A */ U16 Reserved4; /* 0x0C */ U16 IOCStatus; /* 0x0E */ U32 IOCLogInfo; /* 0x10 */ } MPI26_IOUNIT_CONTROL_REPLY, *PTR_MPI26_IOUNIT_CONTROL_REPLY, Mpi26IoUnitControlReply_t, *pMpi26IoUnitControlReply_t; #endif